aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-09-08iwlwifi: fix host command header according the HW specTomas Winkler
This patch aligns definition of host command with the spec. The inaccuracies weren't critical though. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: allow association on radar channel in power saveEmmanuel Grumbach
This patch disables power save upon association and enables it back after association. This allows to associate to AP on a radar channel if power save is enabled. Radar and passive channels are not allowed for TX (required for association) unless RX is received but PS may close the radio and no RX will be received effectively failing association. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: cleanup PCI register handlingTomas Winkler
This patch cleans up pci registers handling. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: fix strict_strtoul error checkingEmmanuel Grumbach
This patch fixes handling of strcit_strtoul return value "0 == sucess". Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: generic init calibrations frameworkTomas Winkler
This patch allows variable number of init calibrations and allows addition new HW. This patch also fixes critical bug. Only last calibration result was applied. On reception of one calibration result all the calibration was freed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: remove rfkill warning from iwl-ioTomas Winkler
The patch removes the warning since registers might be accessed also during rfkill. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: replace readl and writel with io/read/write/32Tomas Winkler
This patch replaces readl and writel with more cross platform ioread32 and iowrite32. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: use strict_strtoul instead of simple_strtoulTomas Winkler
This patch makes use of strict_srtoul in sysfs code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: avoid redundant iwl3945_get_active_dwell_timeAbhijeet Kolekar
iwl3945_get_active_dwell_time is called twice within the same context. The patch removes one instance. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: removed bg_post_associate workAbhijeet Kolekar
This patch removes bg_post_associate work. A direct call iwl3945_post_associate is made to avoid the waiting by userspace programs. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: replace association and beacon hooks with bss_info_changed cbAbhijeet Kolekar
Let mac80211 and bss_info_changed callback handle the association and beacon changes. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: fix unbalanced mutexAbhijeet Kolekar
The patch removes unlocking of mutex from post_associate. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: align set channel with mac80211Tomas Winkler
This patch makes use of mac80211 defaults for channel and band. Older code that uses G band channel 6 was removed. This patch also changes iwl_set_rxon_channel signature. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: allow consecutive scans in unassociated stateRon Rindjunsky
This patch allows consecutive scans requests when driver is in unassociated state. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Esti Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: remove obsolete 4965 forward declarationsRon Rindjunsky
This patch removes unused forward declarations functions. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: clean up hw scan handlerTomas Winkler
This patch cleans up iwl_mac_hw_scan handler. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi : Added bss_info_changed callback to 3945Abhijeet Kolekar
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08p54: better firmware supportChristian Lamparter
This patch hopefully contains all necessary changes to support firmwares for all devices up to atleast 2.13.3.0. (or: LowerMAC Protocol Rev: 5.5 ) And this is a big win, since: * newer firmwares are more stable and reliable than the old ones. * no problems anymore with packages > 1399 octets (without lowering the MTU). * monitor mode finally works on USB for more than just a few seconds. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08p54: set_filter refactoringChristian Lamparter
p54_set_filter has a way too many unnecessary "magic" parameters and values. This patch axes all superfluous parameters and gives most of the magic values appropriate names. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08b43: Replace hardcoded Analog switchMichael Buesch
Replace a hardcoded Analog switch (which breaks on N-PHY) by a call to the switch_analog PHY operation. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08b43: Move Analog switching into phy codeMichael Buesch
This moves the Analog switching code into the PHY files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54usb: support LM87 firmwaresChristian Lamparter
This patch adds the necessary changes to support LM87 firmwares. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05ath9k: uses/needs led_classdev_[un]registerRandy Dunlap
ath9k uses LED classdev functions, so it needs to either select or depend on them. This patch uses the same selects that ath5k uses... drivers/built-in.o: In function `ath_unregister_led': main.c:(.text+0x138c1d): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `ath_register_led': main.c:(.text+0x139c16): undefined reference to `led_classdev_register' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Jouni Malinen <jmalinen@atheros.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Split PHY alloc and initMichael Buesch
This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54: move eeprom code into common libraryChristian Lamparter
Both p54pci and p54usb uses a good chunk of device specific code to get the data from the device's eeprom into the drivers memory. So, this patch reduces the code size and will it make life easier if someone wants to implement ethtool eeprom dumping features. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54: enhance firmware parser to reduce memory wasteChristian Lamparter
This patch greatly reduces one of biggest memory waste in the driver. The firmware headers provides the right values for extra head-/tailroom and mtu size which are usually much lower than the old hardcoded ones. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54pci: increase ring buffer index counter when skippingChristian Lamparter
I'm afraid, I forgot to add the following lines to 7262d59366 ("p54pci: rx tasklet refactoring"). These changes are necessary to ensure loop termination. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05toshiba_acpi: Add support for bluetooth toggling through rfkill (v8)philipl@overt.org
There's been a patch floating around for toshiba_acpi that exports an ad-hoc /proc interface to toggle the bluetooth adapter in a large number of Toshiba laptops. I'm not sure if it's still relevant for the latest models, but it is still required for older models such as my Tecra M3. This change pulls in the low level Toshiba-specific code from the old patch and sets up an rfkill device and a polled input device to track the state of the hardware kill-switch. Signed-off-by: Philip Langdale <philipl@overt.org> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY radio register definitionsMichael Buesch
This adds definitions for the LP-PHY radios. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY read/write phyopsMichael Buesch
This adds read/write phyops for the LP-PHY and LP-PHY radios. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY templateMichael Buesch
This adds template code for the LP-PHY. No actual functionality is implemented. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Move code from nphy.* to phy_n.*Michael Buesch
Sourcecode files for PHY code are named by phy_XXX.{c,h} where XXX is the PHY type. Move the N-PHY code to match the other files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Move remaining code from phy.c to phy_a.cMichael Buesch
This moves the remaining code from phy.c to phy_a.c phy.c is removed. No functional change. Just moving code and removing dead code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05cfg80211: keep track of supported interface modesLuis R. Rodriguez
It is obviously good for userspace to know up front which interface modes a given piece of hardware might support (even if adding such an interface might fail later because of concurrency issues), so let's make cfg80211 aware of that. For good measure, disallow adding interfaces in all other modes so drivers don't forget to announce support for one mode when they add it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05ath5k: HW code cleanupNick Kossifidis
* No code changes... * Split hw.c to multiple files for better maintenance and add some documentation on each file code is going to grow soon (eeprom.c for example is going to get much stuff currently developed on ath_info) so it's better this way. * Rename following functions to maintain naming scheme: ah_setup_xtx_desc -> ah_setup_mrr_tx_desc (Because xtx doesn't say much, it's actually a multi-rate-retry tx descriptor) ath5k_hw_put_tx/rx_buf - > ath5k_hw_set_tx/rxdp ath5k_hw_get_tx/rx_buf -> ath5k_hw_get_tx/rxdp (We don't put any "buf" we set descriptor pointers on hw) ath5k_hw_tx_start -> ath5k_hw_start_tx_dma ath5k_hw_start_rx -> ath5k_hw_start_rx_dma ath5k_hw_stop_pcu_recv -> ath5k_hw_stop_rx_pcu (It's easier this way to identify them, we also have ath5k_hw_start_rx_pcu which completes the set) ath5k_hw_set_intr -> ath5k_hw_set_imr (As in get_isr we set imr here, not "intr") * Move ath5k_hw_setup_rx_desc on ah->ah_setup_rx_desc so we can include support for different rx descriptors in the future * Further cleanups so that checkpatch doesn't complain (only some > 80 col warnings for eeprom.h and reg.h as usual due to comments) Tested on 5211 and 5213 cards and works ok. Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Don't use memcpy for overlapping areasMichael Buesch
It is valid to pass &gphy->rfatt and &gphy->bbatt as rfatt and bbatt pointer arguments to the function. So we have to use memmove for the possibly overlapping memory areas. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03s2io: reindented misleading for loopIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03[netdrvr] removed unused #include <version.h>Huang Weiyi
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/myri10ge/myri10ge.c drivers/net/netxen/netxen_nic_ethtool.c drivers/net/tokenring/lanstreamer.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-038139too: use netdev_alloc_skbKevin Lo
This patch uses netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also cleanup the alignment code. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-038139cp: use netdev_alloc_skbKevin Lo
This patch uses netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also cleanup the alignment code. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03via-rhine: changed to use netdev_alloc_skb() from dev_alloc_skbKevin Lo
Use netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also cleanup the alignment code. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sky2: display product info on boot.Stephen Hemminger
Change bootup messages to print more information. This is to help users who may have old buggy EEPROM image. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sky2: EEPROM read/write bug fixesStephen Hemminger
Cleanup and harden the routines accessing the EEPROM. 1. Prevent spin forever waiting for the TWSI bus 2. Fix write eeprom to write full words rather than only 16 bits Luckly the vendor doesn't provide EEPROM in Linux format so it must never have been used. 3. Don't allow partial eeprom writes, not needed, not safe. These are non-urgent bug fixes. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03Merge branch 'r8169-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-next
2008-09-03ixgbe: change config srrctl to only program one register per VMDq/RSS idAlexander Duyck
This change makes it so only one srrctl register is programmed per VMDq id, and if VMDq is not enabled it is one register per RSS queue. Currently this function is working correctly for the multiqueue RSS and single queue cases, but if any advances features such as VMDq or DCB would have been enabled this function would have caused issues as it was not correct. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03igb: clean up a stray fake netdev code left in rx pathAlexander Duyck
Remove code that was in place to support fake netdev Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03igb: remove unneeded cleaned variable in clean_tx_irq pathAlexander Duyck
The cleaned variable can be replaced by the count of packets cleaned during the tx interrupt routine so it can be removed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03e1000e: add support for new 82574L partBruce Allan
This new part has the same feature set as previous parts with the addition of MSI-X support. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03e1000e: add support for 82567LM-3 and 82567LF-3 (ICH10D) partsBruce Allan
Add support for new LOM devices on the latest generation ICHx platforms. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03e1000e: add support for the 82567LM-4 deviceBruce Allan
Enable PCI device ID for a new combination of MAC and PHY already supported in the driver. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-17 17:06:52 +0000