aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-11-27[ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King
Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5330/1: mach-pxa: Fixup reset for systems using reboot=cold or other strings [ARM] pxa: fix incorrect PCMCIA PSKTSEL pin configuration for spitz [ARM] pxa: fix I2C controller device being registered twice on Akita pxafb: only initialize the smart panel thread when dealing with a smartpanel pxafb: introduce LCD_TYPE_MASK and use it.
2008-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: ACE1001 patch for cp2101.c USB: usbmon: fix read(2) USB: gadget rndis: send notifications USB: gadget rndis: stop windows self-immolation USB: storage: update unusual_devs entries for Nokia 5300 and 5310 USB: storage: updates unusual_devs entry for the Nokia 6300 usb: musb: fix bug in musb_schedule USB: fix SB700 usb subsystem hang bug
2008-11-20Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: intel-iommu: fix compile warnings
2008-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (23 commits) net: fix tiny output corruption of /proc/net/snmp6 atl2: don't request irq on resume if netif running ipv6: use seq_release_private for ip6mr.c /proc entries pkt_sched: fix missing check for packet overrun in qdisc_dump_stab() smc911x: Fix printf format typo in smc911x driver. asix: Fix asix-based cards connecting to 10/100Mbs LAN. mv643xx_eth: fix recycle check bound mv643xx_eth: fix the order of mdiobus_{unregister, free}() calls sh: sh_eth: Update to change of mii_bus TPROXY: supply a struct flowi->flags argument in inet_sk_rebuild_header() TPROXY: fill struct flowi->flags in udp_sendmsg() net: ipg.c fix bracing on endian swapping phylib: Fix auto-negotiation restart avoidance net: jme.c rxdesc.flags is __le16, other missing endian swaps phylib: fix phy name example in documentation net: Do not fire linkwatch events until the device is registered. phonet: fix compilation with gcc-3.4 ixgbe: fix compilation with gcc-3.4 pktgen: fix multiple queue warning net: fix ip_mr_init() error path ...
2008-11-20atl2: don't request irq on resume if netif runningAlan Jenkins
If the device is suspended with the cable disconnected, then resumed with the cable connected, dev->open is called before resume. During resume, we request an IRQ, but the IRQ was already assigned during dev->open, resulting in the warning shown below. Don't request an IRQ if the device is running. Call Trace: [<c011b89a>] warn_on_slowpath+0x40/0x59 [<c023df15>] raw_pci_read+0x4d/0x55 [<c023dff3>] pci_read+0x1c/0x21 [<c01bcd81>] __pci_find_next_cap_ttl+0x44/0x70 [<c01bce86>] __pci_find_next_cap+0x1a/0x1f [<c01bcef9>] pci_find_capability+0x28/0x2c [<c01c4144>] pci_msi_check_device+0x53/0x62 [<c01c49c2>] pci_enable_msi+0x3a/0x1cd [<e019f17b>] atl2_write_phy_reg+0x40/0x5f [atl2] [<c01061b1>] dma_generic_alloc_coherent+0x0/0xd7 [<e019f107>] atl2_request_irq+0x15/0x49 [atl2] [<e01a1481>] atl2_open+0x20b/0x297 [atl2] [<c024a35c>] dev_open+0x62/0x91 [<c0248b9a>] dev_change_flags+0x93/0x141 [<c024f308>] do_setlink+0x238/0x2d5 [<c02501b2>] rtnl_setlink+0xa9/0xbf [<c0297f0c>] mutex_lock+0xb/0x19 [<c024ffa7>] rtnl_dump_ifinfo+0x0/0x69 [<c0250109>] rtnl_setlink+0x0/0xbf [<c024fe42>] rtnetlink_rcv_msg+0x185/0x19f [<c0240fd1>] sock_rmalloc+0x23/0x57 [<c024fcbd>] rtnetlink_rcv_msg+0x0/0x19f [<c0259457>] netlink_rcv_skb+0x2d/0x71 [<c024fcb7>] rtnetlink_rcv+0x14/0x1a [<c025929e>] netlink_unicast+0x184/0x1e4 [<c025992a>] netlink_sendmsg+0x233/0x240 [<c023f405>] sock_sendmsg+0xb7/0xd0 [<c0129131>] autoremove_wake_function+0x0/0x2b [<c0129131>] autoremove_wake_function+0x0/0x2b [<c0147796>] mempool_alloc+0x2d/0x9e [<c020c923>] scsi_pool_alloc_command+0x35/0x4f [<c0297f0c>] mutex_lock+0xb/0x19 [<c028e867>] unix_stream_recvmsg+0x357/0x3e2 [<c01b81c9>] copy_from_user+0x23/0x4f [<c02452ea>] verify_iovec+0x3e/0x6c [<c023f5ab>] sys_sendmsg+0x18d/0x1f0 [<c023ffa8>] sys_recvmsg+0x146/0x1c8 [<c0240016>] sys_recvmsg+0x1b4/0x1c8 [<c0118f48>] __wake_up+0xf/0x15 [<c02586cd>] netlink_table_ungrab+0x17/0x19 [<c01b83ba>] copy_to_user+0x25/0x3b [<c023fe4a>] move_addr_to_user+0x50/0x68 [<c0240266>] sys_getsockname+0x6f/0x9a [<c0240280>] sys_getsockname+0x89/0x9a [<c015046a>] do_wp_page+0x3ae/0x41a [<c0151525>] handle_mm_fault+0x4c5/0x540 [<c02405d0>] sys_socketcall+0x176/0x1b0 [<c010376d>] sysenter_do_call+0x12/0x21 Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Jay Cliburn <jcliburn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-11-20smc911x: Fix printf format typo in smc911x driver.Vernon Sauder
Signed-off-by: Vernon Sauder <VernonInHand@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20asix: Fix asix-based cards connecting to 10/100Mbs LAN.Pantelis Koukousoulas
Add AX_MEDIUM_ENCK also when speed = 10/100Mbps. This allows my belkin f5d5055 to work with my 100Mbps switch and with an old 10Mbps ISA card. Without this patch, the card is recognized and the interface is brought up fine, but no packets actually flow through the interface. Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com> Acked-by: David Hollis <dhollis@davehollis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20mv643xx_eth: fix recycle check boundLennert Buytenhek
When mv643xx_eth allocates skbuffs, it adds 'dma_get_cache_alignment() - 1' to the length it needs, so that it can align the skb's ->data pointer to a cache boundary. When checking whether a transmitted skbuff can be reused as a receive buffer, these bytes needs to be included into the minimum bound for the recycle check. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20mv643xx_eth: fix the order of mdiobus_{unregister, free}() callsLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20sh: sh_eth: Update to change of mii_busNobuhiro Iwamatsu
Update to change of mii_bus interface and fix some warning. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19USB: ACE1001 patch for cp2101.cM Kondrin
The patch which adds IDs for AKTAKOM USB->RS232 cable (http://www.aktakom.ru/product/kio/ace-1001.htm) is attached. From: M Kondrin <mkondrin@hppi.troitsk.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19USB: usbmon: fix read(2)Pete Zaitcev
There's a bug in the usbmon binary reader: When using read() to fetch the packets and a packet's data is partially read, the next read call will once again return up to len_cap bytes of data. The b_read counter is not regarded when determining the remaining chunk size. So, when dumping USB data with "cat /dev/usbmon0 > usbmon.trace" while reading from a USB storage device and analyzing the dump file afterwards it will get out of sync after a couple of packets. Signed-off-by: Ingo van Lil <inguin@gmx.de> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19USB: gadget rndis: send notificationsRichard Röjfors
It turns out that atomic_inc_return() returns the *new* value not the original one, so the logic in rndis_response_available() kept the first RNDIS response notification from getting out. This prevented interoperation with MS-Windows (but not Linux). Fix this to make RNDIS behave again. Signed-off-by: Richard Röjfors <richard.rojfors@endian.se> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19USB: gadget rndis: stop windows self-immolationDavid Brownell
Somewhere in the conversion of the RNDIS gadget code to the new framework, the descriptor of its data interface seems to have been copied from the CDC Ethernet driver. Unfortunately that means it got a nonzero altsetting ... which is incorrect. Issue uncovered by Richard Röjfors <richard.rojfors@endian.se>. This patch fixes that problem, and resolves at least some cases of Windows XP bluescreening itself. Tested-by: Richard Röjfors <richard.rojfors@endian.se>. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19USB: storage: update unusual_devs entries for Nokia 5300 and 5310Alan Stern
This patch (as1168) updates the unusual_devs entry for the Nokia 5300. According to Jorge Lucangeli Obes <t4m5yn@gmail.com>, some existing models have a revision number lower than the lower limit of the current entry. The patch also moves the entry for the Nokia 5310 to its correct place in the file. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19USB: storage: updates unusual_devs entry for the Nokia 6300Alan Stern
This patch (as1169) modifies the unusual_devs entry for the Nokia 6300. According to Maciej Gierok <mgierok@gmail.com> and David McBride <dwm@doc.ic.ac.uk>, the revision limits need to be wider. This fixes Bugzilla #11768. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19usb: musb: fix bug in musb_scheduleFelipe Balbi
This bug was introduced recently. Fix it before bigger problems appear. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19USB: fix SB700 usb subsystem hang bugAndiry Xu
This patch is required for AMD SB700 south bridge revision A12 and A13 to avoid USB subsystem hang symptom. The USB subsystem hang symptom is observed when the system has multiple USB devices connected to it. In some cases a USB hub may be required to observe this symptom. This patch works around the problem by correcting the internal register setting that will help by changing the behavior of the internal logic to avoid the USB subsystem hang issue. The change in the behavior of the logic does not impact the normal operation of the USB subsystem. Reported-by: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de> Tested-by: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de> Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Libin Yang <libin.yang@amd.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Fix disable IRQ 0 in pci_reset_function()
2008-11-19Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: more general identifier for Phoenix BIOS AMD IOMMU: check for next_bit also in unmapped area AMD IOMMU: fix fullflush comparison length AMD IOMMU: enable device isolation per default AMD IOMMU: add parameter to disable device isolation x86, PEBS/DS: fix code flow in ds_request() x86: add rdtsc barrier to TSC sync check xen: fix scrub_page() x86: fix es7000 compiling x86, bts: fix unlock problem in ds.c x86, voyager: fix smp generic helper voyager breakage x86: move iomap.h to the new include location
2008-11-19cciss: fix DEBUG printk formatsRandy Dunlap
Fix printk format warnings when CCISS_DEBUG is defined. drivers/block/cciss.c:2856: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' drivers/block/cciss.c:3205: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int' drivers/block/cciss.c:3236: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64' drivers/block/cciss.c:3246: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19W1 OMAP: Fix OMAP LDP boot crashStanley.Miao
OMAP LDP boot crash. This is because w1 subsystem changed the search interface, so update omap_hdq's search interface to follow the change. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19drivers/video/backlight/da903x.c: introduce one more missing kfreeMike Rapoport
One more error handling code should have kfree as well Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19cirrusfb: remove unused variablesVlada Peric
After commit a1d35a7a (cirrusfb: use modedb and add mode_option parameter), these variables are no longer used, so remove them to fix compilation warning. Signed-off-by: Vlada Periæ <vlada.peric@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19drivers/hwmon/applesmc.c: add generic MacPro supportHenrik Rydberg
In order to analyze the SMC of the newer MacPros, applesmc needs to recognize the machine. This patch adds the missing generic dmi_match entry for MacPro models. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Cc: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19drivers/video/backlight/da903x.c: introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Richard Purdie <rpurdie@linux.intel.com> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19spi_imx: full duplex dma corruption bugfixAndrea Paterniani
Fix unsafe order in dma mapping operation: always flush data from the cache *BEFORE* invalidating it, to allow full duplex transfers where the same buffer may be used for both writes and reads. Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19lcd: fix oops if driver only interested in .set_powerBen Dooks
The LCD driver core calls LCD drivers when either the blanking state or the display mode has changed, but does not make any check to see if the called driver has a .set_mode method. This means if a driver only has a .set_power method then the system will OOPS on changing mode (and with the console semaphore held so you cannot easily see the problem). Fix the problem by ensuring that either callback is valid before use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19viafb: fix releasing of /proc/viafb/ subtreeBruno Prémont
When unloading viafb module it does not remove it's /proc/viafb/ subtree which causes multiple viafb directories to appear below proc when mobprobing viafb and also lets kernel WARN() on duplicate proc entries: [ 145.458387] WARNING: at /usr/src/linux-2.6.28-rc3-git6/fs/proc/generic.c:551 proc_register+0xe6/0x160() [ 145.458945] proc_dir_entry '/proc/viafb' already registered [ 145.459278] Modules linked in: viafb(+) i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect snd_hda_intel snd_pcm snd_timer snd soundcore snd_page_alloc sg via_agp agpgart [last unloaded: drm] [ 145.460647] Pid: 1904, comm: modprobe Tainted: G W 2.6.28-rc3-git6 #4 [ 145.461064] Call Trace: [ 145.461248] [<c01066f1>] ? dump_stack+0x1/0x80 [ 145.461533] [<c01228a3>] warn_slowpath+0x63/0x80 [ 145.461851] [<c0253ec9>] ? idr_get_empty_slot+0xe9/0x250 [ 145.462186] [<c0254120>] ? ida_get_new_above+0xf0/0x150 [ 145.462528] [<c019fb86>] proc_register+0xe6/0x160 [ 145.462827] [<c019fdc6>] proc_mkdir_mode+0x36/0x50 [ 145.463135] [<c019fdef>] proc_mkdir+0xf/0x20 [ 145.463457] [<f807173c>] viafb_init+0x73c/0xc86 [viafb] [ 145.463823] [<f8071000>] ? viafb_init+0x0/0xc86 [viafb] [ 145.464147] [<c010111d>] do_one_initcall+0x2d/0x160 [ 145.464460] [<c01a6543>] ? sysfs_add_file+0x13/0x20 [ 145.464786] [<c015f031>] ? vfree+0x21/0x30 [ 145.465049] [<c01433b5>] ? load_module+0x1215/0x1500 [ 145.465381] [<c014e455>] ? __alloc_pages_internal+0x95/0x400 [ 145.465755] [<c0143723>] sys_init_module+0x83/0x1a0 [ 145.466065] [<c016ceed>] ? sys_read+0x3d/0x70 [ 145.466354] [<c0103bc1>] sysenter_do_call+0x12/0x25 [ 145.466653] ---[ end trace c84b37826e16748c ]--- Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19pxa2xx_spi: bugfix full duplex dma data corruptionNed Forrester
Fixes a data corruption bug in pxa2xx_spi.c when operating in full duplex mode with DMA and using buffers that overlap. SPI transmit and receive buffers are allowed to be the same or to overlap. However, this driver fails if such overlap is attempted in DMA mode because it maps the rx and tx buffers in the wrong order. By mapping DMA_FROM_DEVICE (read) before DMA_TO_DEVICE (write), it invalidates the cache before flushing it, thus discarding data which should have been transmitted. The patch corrects the order of mapping. This bug exists in all versions of pxa2xx_spi.c; similar bugs are in the drivers for two other SPI controllers (au1500, imx). A version of this patch has been tested on kernel 2.6.20 using verification of loopback data with: random transfer length, random bits-per-word, random positive offsets (both larger and smaller than transfer length) between the start of the rx and tx buffers, and varying clock rates. Signed-off-by: Ned Forrester <nforrester@whoi.edu> Cc: Vernon Sauder <vernoninhand@gmail.com> Cc: J. Scott Merritt <merrij3@rpi.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <stable@kernel.org> [2.6.27.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19tmiofb: fix compilation with ACCEL disabledDmitry Baryshkov
Restore support for compiling tmiofb with acceleration disabled. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19GRU: fix for debug optionJack Steiner
Enable -D DEBUG in the GRU Makefile if CONFIG_SGI_GRU_DEBUG is selected. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19gpiolib: extend gpio label column width in debugfs fileJarkko Nikula
There are already various drivers having bigger label than 12 bytes. Most of them fit well under 20 bytes but make column width exact so that oversized labels don't mess up output alignment. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: David Brownell <david-b@pacbell.net> Cc: <stable@kernel.org> [2.6.26.x, 2.6.26.x, 2.6.27.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19fbdev: clean the penguin's dirty feetClemens Ladisch
When booting in a direct color mode, the penguin has dirty feet, i.e., some pixels have the wrong color. This is caused by fb_set_logo_directpalette() which does not initialize the last 32 palette entries. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19drivers/video: bad error test before a dereferenceJulien Brunel
The error test that follows the call to backlight_device_register semms not to concern the right variable. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @def0@ expression x; position p0; @@ x@p0 = backlight_device_register(...) @protected@ expression def0.x,E; position def0.p0; position p; statement S; @@ x@p0 ... when != x = E if (!IS_ERR(x) && ...) {<... x@p ...>} else S @unprotected@ expression def0.x; identifier fld; position def0.p0; position p != protected.p; @@ x@p0 ... when != x = E * x@p->fld // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19hwmon: applesmc: Add support for iMac 6Henrik Rydberg
Add temperature sensor support for iMac 6. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Caleb Hyde <caleb.hyde@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19net: ipg.c fix bracing on endian swappingHarvey Harrison
rxfd->frag_info is a __le64, IPG_RFI_FRAGLEN is a cpu-endian constant and wants to be outside of the le64_to_cpu. Fixed in multiple places. Also an occurrence where le64_to_cpu was used instead of cpu_to_le64 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19phylib: Fix auto-negotiation restart avoidanceTrent Piepho
A previous patch, 51e2a3846eab18711f4eb59cd0a4c33054e2980a, made genphy_config_aneg() not restart aneg by calling genphy_restart_aneg() if the advertisement hadn't changed. But, genphy_restart_aneg() doesn't just restart aneg, it may also *enable* aneg or un-isolate the PHY from the MII (those functions are controlled by the same register). The code to avoid calling genphy_restart_aneg() didn't consider this. So, modify genphy_config_aneg() to also check if the PHY needs to have aneg enabled or be un-isolated before deciding not to restart aneg. This caused a problem with certain Davicom PHYs, as that driver isolates the PHY (why?) before calling genphy_config_aneg() and expects the PHY to be un-isolated by that function. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19net: jme.c rxdesc.flags is __le16, other missing endian swapsHarvey Harrison
This is the minimal patch to fix endian mismatches. These are probably bugs on big-endian arches, noops on little endian. jme_rxsum_ok could be improved to directly take a __le16 and change all of the masks/sets to be in little-endian, but has not been done here to keep the patch small. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19ixgbe: fix compilation with gcc-3.4Alexey Dobriyan
CC [M] drivers/net/ixgbe/ixgbe_main.o drivers/net/ixgbe/ixgbe_main.c: In function `ixgbe_intr': drivers/net/ixgbe/ixgbe_main.c:1290: sorry, unimplemented: inlining failed in call to 'ixgbe_irq_enable': function body not available drivers/net/ixgbe/ixgbe_main.c:1312: sorry, unimplemented: called from here make[4]: *** [drivers/net/ixgbe/ixgbe_main.o] Error 1 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19PCI: Fix disable IRQ 0 in pci_reset_function()Sheng Yang
Before initialization, dev->irq may be zero. Make sure we don't disable it at reset time in that case. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-19intel-iommu: fix compile warningsFUJITA Tomonori
Impact: cleanup I got the following warnings on IA64: linux-2.6/drivers/pci/intel-iommu.c: In function 'init_dmars': linux-2.6/drivers/pci/intel-iommu.c:1658: warning: format '%Lx' expects type 'long long unsigned int', but argument 2 has type 'u64' linux-2.6/drivers/pci/intel-iommu.c:1663: warning: format '%Lx' expects type 'long long unsigned int', but argument 2 has type 'u64' Another victim of int-ll64.h versus int-l64.h confusion between platforms. ->reg_base_addr has a type of u64 - which can only be printed out consistently if we cast its type up to LL. [ Eventually reg_base_addr should be converted to phys_addr_t, for which we have the %pR printk helper - but that is out of the scope of late -rc's. ] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18iwlagn: fix RX skb alignmentJohannes Berg
So I dug deeper into the DMA problems I had with iwlagn and a kind soul helped me in that he said something about pci-e alignment and mentioned the iwl_rx_allocate function to check for crossing 4KB boundaries. Since there's 8KB A-MPDU support, crossing 4k boundaries didn't seem like something the device would fail with, but when I looked into the function for a minute anyway I stumbled over this little gem: BUG_ON(rxb->dma_addr & (~DMA_BIT_MASK(36) & 0xff)); Clearly, that is a totally bogus check, one would hope the compiler removes it entirely. (Think about it) After fixing it, I obviously ran into it, nothing guarantees the alignment the way you want it, because of the way skbs and their headroom are allocated. I won't explain that here nor double-check that I'm right, that goes beyond what most of the CC'ed people care about. So then I came up with the patch below, and so far my system has survived minutes with 64K pages, when it would previously fail in seconds. And I haven't seen a single instance of the TX bug either. But when you see the patch it'll be pretty obvious to you why. This should fix the following reported kernel bugs: http://bugzilla.kernel.org/show_bug.cgi?id=11596 http://bugzilla.kernel.org/show_bug.cgi?id=11393 http://bugzilla.kernel.org/show_bug.cgi?id=11983 I haven't checked if there are any elsewhere, but I suppose RHBZ will have a few instances too... I'd like to ask anyone who is CC'ed (those are people I know ran into the bug) to try this patch. I am convinced that this patch is correct in spirit, but I haven't understood why, for example, there are so many unmap calls. I'm not entirely convinced that this is the only bug leading to the TX reply errors. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-18mac80211: remove ieee80211_notify_macJohannes Berg
Before ieee80211_notify_mac() was added, it was presented with the use case of using it to tell mac80211 that the association may have been lost because the firmware crashed/reset. Since then, it has also been used by iwlwifi to (slightly) speed up re-association after resume, a workaround around the fact that mac80211 has no suspend/resume handling yet. It is also not used by any other drivers, so clearly it cannot be necessary for "good enough" suspend/resume. Unfortunately, the callback suffers from a severe problem: It only works for station mode. If suspend/resume happens while in IBSS or any other mode (but station), then the callback is pointless. Recently, it has created a number of locking issues, first because it required rtnl locking rather than RCU due to calling sleeping functions within the critical section, and now because it's called by iwlwifi from the mac80211 workqueue that may not use the rtnl because it is flushed under rtnl. (cf. http://bugzilla.kernel.org/show_bug.cgi?id=12046) I think, therefore, that we should take a step back, remove it entirely for now and add the small feature it provided properly. For suspend and resume we will need to introduce new hooks, and for the case where the firmware was reset the driver will probably simply just pretend it has done a suspend/resume cycle to get mac80211 to reprogram the hardware completely, not just try to connect to the current AP again in station mode. When doing so, we will need to take into account locking issues and possibly defer to schedule_work from within mac80211 for the resume operation, while the suspend operation must be done directly. Proper suspend/resume should also not necessarily try to reconnect to the current AP, the time spent in suspend may have been short enough to not be disconnected from the AP, mac80211 will detect that the AP went out of range quickly if it did, and if the association is lost then the AP will disassoc as soon as a data frame is sent. We might also take into account WWOL then, and have mac80211 program the hardware into such a mode where it is available and requested. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-18libertas_tf: fix skb tail pointerJohannes Berg
skb->tail can't be meant here because it's not the same across 32/64 bit compilations. This means there's no way the current driver can work on 64-bit architectures. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org [2.6.27] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-18Parport driver: disable pc-style parport on Blackfin systemsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-18Merge branch 'iommu-fixes-2.6.28' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent
2008-11-18Release old elevator on change elevatorZhaolei
We should release old elevator when change to use a new one. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>