aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: startup race in hso driverOliver Neukum
The flag marking a device running must be set before the URBs for recption are submitted or they may complete too early and fail to resubmit. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22r6040: bump release number to 0.19Florian Fainelli
This patch bumps the release number of the driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22r6040: save and restore MIER correctly in the interrupt routineJoe Chou
This patch saves the MIER register contents before treating interrupts, then restores them correcty at the end of the interrupt routine. Signed-off-by: Joe Chou <Joe.Chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22r6040: fix wrong logic in mdio codeJoe Chou
This patch fixes a reverse logic in the MDIO code. Signed-off-by: Joe Chou <Joe.Chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21tg3: Update version to 3.97Matt Carlson
This patch updates the version number to 3.97. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21tg3: tg3.h cleanupsMatt Carlson
This patch cleans up the tg3 header file by removing the preprocessor definitions for standard PCI configuration space registers. The driver should be using the standard definitions when needed. The patch continues by removing redundant PHY related definitions and reorganizes some of the remaining entries. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21tg3: Remove unused cfgspc device membersMatt Carlson
This patch removes the pci_bist and pci_hdr_type members from the device structure and removes the code that references them. They are not really used. The patch rounds out the changes by moving the pci_cmd member to plug a structure hole that would have been created. On 32-bit systems, this movement removes a subsequent structure hole later in the structure. On 64-bit systems though, the movement merely consolidates two holes into one larger hole. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21tg3: Cleanup IPV6 LSOMatt Carlson
This patch attempts to make the relationship between IPV6 checksum offload and IPV6 LSO more obvious. The patch also toggles a bit needed for IPV6 LSO on 5785 and 57780 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21tg3: WOL fixesMatt Carlson
The first hunk of this patch inverts a flag that was accidentally toggled as part of commit 0a459aac9d151c2e36ec65723b9b845b24c5cbc3 ("tg3: Allow WOL for phylib controlled Broadcom phys"). The second hunk of the patch removes the call to device_may_wakeup() in the 5906 config detection path. At the point of the call, the driver shouldn't be querying for WOL capability. It should be detecting and setting it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21ixgbe: fix the display of DCB control stats in ethtoolDon Skidmore
Priority flow contol statistics for Data Center Bridging (DCB) weren't included in ethtool. This patch adds them. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21net: add DCNA attribute to the BCN interface for DCBDon Skidmore
Adds the Backward Congestion Notification Address (BCNA) attribute to the Backward Congestion Notification (BCN) interface for Data Center Bridging (DCB), which was missing. Receive the BCNA attribute in the ixgbe driver. The BCNA attribute is for a switch to inform the endstation about the physical port identification in order to support BCN on aggregated links. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2008-12-21net: fix DCB setstate to return success/failureDon Skidmore
Data Center Bridging (DCB) had no way to know if setstate had failed in the driver. This patch enables dcb netlink code to handle the status for the DCB setstate interface. Likewise it allows the driver to return a failed status if MSI-X isn't enabled. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-12-22Convert ixp4xx_eth driver to use net_device_ops.Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22drivers/net/wan: Remove redundant testJulia Lawall
arg is checked not to be NULL a few lines before. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22HDLC_PPP: Fix Configure-Ack to return original options as required by the ↵Krzysztof Hałasa
standard. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: move common debugging from network drivers to QMGR module.Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22WAN: Add IXP4xx HSS HDLC driver.Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Add ethtool support to Ethernet driver.Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Add PHYLIB MII ioctl to the Ethernet driver.Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Add PHYLIB support to Ethernet driver.Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Make the Ethernet driver use built-in netdev stats.Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22IXP4xx: Silence section mismatch warning in Ethernet driver.Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-19b43: Add key memory dumpingMichael Buesch
This adds an option to dump all crypto related memory to the kernel log. Obviously, it should not be enabled on productive systems. ;) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19b43: Suspend MAC while killing the radioMichael Buesch
We should suspend the MAC, before we kill the radio. This gives the MAC a chance to leave any TX/RX state and it avoids races on the PHY/RADIO registers. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath5k: correct packet length in tx descriptorsBob Copeland
Packet length calculation (which includes frame check sequence) should take into account whether we add a pad field or not. Extract the calculation into a helper and use it in both places. Changes to desc.c Changes-licensed-under: ISC Changes to ath5k.h, base.c Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19b43: Fix some MAC lockingMichael Buesch
This fixes some locking w.r.t. the lower MAC (firmware). It also removes a lot of ancient IRQ-locking that's not needed anymore. We simply suspend the MAC. That's easier and causes less trouble. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: iwl-tx.c cleanup (remove unused parameter and unused local variable).Rami Rosen
This patch removes unused parameter and unused local variable in methods in iwl-tx.c: - Remove a parameter (is_unicast) from iwl_tx_cmd_build_basic(). - Remove an unused variable name unicast from iwl_tx_skb(). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fixed RX decryption status reportingJouni Malinen
The RX code in ath9k uses sc_keymap to figure out whether a default key was used. However, the default key entries in sc_keymap were always set and as such, frames could have been claimed to be decrypted by hardware when they were not. This can cause problems especially with TKIP since mac80211 is validating the Michael MIC in the frame and this will result in MIC failure and potentially TKIP countermeasures if the frame was not decrypted correctly. Change key cache slot allocation to mark only the keys that really have been used in sc_keymap to avoid the issue. The key cache slot selection routines are now internally avoiding the slots that may be needed for TKIP group keys. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fix key cache slot selection for splitmicJouni Malinen
ath_reserve_key_cache_slot() was obviously supposed to return an index to a free slot, not reserved one. This could have caused problems with hardware revisions that use splitmic. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Protect config() callback with a mutexSujith
This should fix the timeout issues seen when using wpa_supplicant. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19p54usb: bring first generation devices back to lifeChristian Lamparter
This patch fixes a serious regression (introduced by: "p54: fix memory management") that affected isl3886+net2280 usb devices operation. Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Artur Skawina <art.08.09@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Key cache allocation for AP modeJouni Malinen
Enhance allocation of key cache entries to support multiple pairwise keys to fix AP mode with more than one associated STA. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fix a NULL pointer dereference in ath_rate_getJouni Malinen
It looks like mac80211 may try to send unicast frames to a STA that does not have a STA entry. We need to make sure that that is caught in the rate control code before dereferencing STA data. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: indicate txpower is off in sysfsJay Sternberg
The patch checks if the radio is disabled before displaying the tx power level. Previously when the txpower was set off show_tx_power still returned the prior power level. Now it will indicate the power has been turned off. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: use GFP_KERNEL to allocate Rx SKB memoryZhu Yi
Previously we allocate Rx SKB with GFP_ATOMIC flag. This is because we need to hold a spinlock to protect the two rx_used and rx_free lists operation in the rxq. spin_lock(); ... element = rxq->rx_used.next; element->skb = alloc_skb(..., GFP_ATOMIC); list_del(element); list_add_tail(&element->list, &rxq->rx_free); ... spin_unlock(); After spliting the rx_used delete and rx_free insert into two operations, we don't require the skb allocation in an atomic context any more (the function itself is scheduled in a workqueue). spin_lock(); ... element = rxq->rx_used.next; list_del(element); ... spin_unlock(); ... element->skb = alloc_skb(..., GFP_KERNEL); ... spin_lock() ... list_add_tail(&element->list, &rxq->rx_free); ... spin_unlock(); This patch should fix the "iwlagn: Can not allocate SKB buffers" warning we see recently. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: use meaningful vars in _iwl_poll_bit()Wu, Fengguang
Rename vars in _iwl_poll_bit() to better reflect the truth. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: remove useless gotoWu Fengguang
The patch removes some useless goto in code cleanup. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: use type uint for module param debugWu, Fengguang
This enables one to change the debug level at bit 31. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: update comments on the debug interfaceWu, Fengguang
Bring up-to-date some comments on the location of debug files. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: add line feed to printkWu, Fengguang
This adds line feed to printk. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: cleanup iwl-dev.hWinkler, Tomas
The patch removes unused definition and moves code to proper places. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19iwlwifi: remove a parameter (dest) from *_fill_beacon_frame() methods.Rami Rosen
This patch removes a parameter (dest) from iwl_fill_beacon_frame() (iwl-agn.c) and from iwl3945_fill_beacon_frame(). (iwl-3945.c,iwl-3945.h) Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Move rate control alg register/unregister to appropriate placeVasanthakumar Thiagarajan
This patch makes sure the rate control alg is registered/unregistered only once for this module. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Synchronize DMA transfer with CPU at right placeVasanthakumar Thiagarajan
This patch does pci_dma_sync_single_for_cpu() before accessing the header of the frame and queueing the same buffer into h/w. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Remove MAC header pad before reporting TX statusJouni Malinen
Remove the possible MAC header pad before reporting TX status to mac80211. This pad is hardware specific operation and should not be exposed outside the driver. This fixes the frame body in monitor interfaces that could be used to check on TX status for transmitted frames. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fix TX status reporting for retries and MCS indexJouni Malinen
The count field in struct ieee80211_tx_rate does not include the final successful attempt, so only report retries here. Fix the struct ieee80211_tx_rate::idx field when MCS was used. It is supposed to be the MCS index, not an internal index to the rate control algorithm table. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19rtl8187: Fix crash on unload when using SLUB debugHerton Ronaldo Krzesinski
Reported-by: Hin-Tak Leung <htl10@users.sourceforge.net> After the code was modified to use urb anchors ("rtl8187: Use usb anchor facilities to manage urbs"), rtl8187 began generating an intermittent GPF on shutdown when using SLUB with debugging enabled. Furthermore, rebooting the system with a ping running caused a GPF every time. There are two problems: (1) incorrect locking in the rtl8187_rx_cb() routine, a pre-existing bug that apparently had not been triggered before, and (2) duplicate freeing of receive skbs that was probably introduced with the change to anchors. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19p54: remove free_on_tx parameterChristian Lamparter
This patch simplifies the tx code a bit and will be necessary for the upcoming stlc45xx<->p54 port. In detail: we no longer have to tell all back-end drivers directly, if we want to free a frame right after it was send to the firmware, or if we do it in the library callback later. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-15 21:53:11 +0000