aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-04-12sc92031: sysfs link missingStephen Hemminger
Add missing sysfs device association. Compile tested only -ENOHW. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10380 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Cc: Cesar Eduardo Barros <cesarb@cesarb.net> Cc: <tom@sharkbay.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12smc91x driver: fix bug: print warning only in interrupt modeSonic Zhang
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3956 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12forcedeth: mac address fixAyaz Abdulla
This critical patch fixes a mac address issue recently introduced. If the device's mac address was in correct order and the flag NVREG_TRANSMITPOLL_MAC_ADDR_REV was set, during nv_remove the flag would get cleared. During next load, the mac address would get reversed because the flag is missing. As it has been indicated previously, the flag is cleared across a low power transition. Therefore, the driver should set the mac address back into the reversed order when clearing the flag. Also, the driver should set back the flag after a low power transition to protect against kexec command calling nv_probe a second time. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12macb: Use semicolon instead of comma for statementAtsushi Nemoto
It seems no good reason to use comma here. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12macb: Call phy_disconnect on removingAtsushi Nemoto
Call phy_disconnect() on remove routine. Otherwise the phy timer causes a kernel crash when unloading. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12ucc_geth: fix non-functional fixed phy supportJoakim Tjernlund
The new Fixed PHY method, fixed-link property, isn't impl. for ucc_geth which makes fixed PHYs non functional. Add support for the new method to restore the Fixed PHY functionality. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12fs_enet: Don't call NAPI functions when NAPI is not used.Laurent Pinchart
fs_enet_close() calls napi_disable() unconditionally. This patch skips the call when use_napi isn't set. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12sky2: missing chip name for Yukon SupremeStephen Hemminger
Any usage of sky2 on new Yukon Supreme would cause a NULL dereference. The chip is very new, so the support is still untested; vendor has not sent any eval hardware. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12[libata] make ali_atapi_dma staticAdrian Bunk
This patch makes the needlessly global ali_atapi_dma static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-12[libata] sata_svw: fix reversed port countJeff Garzik
According to Broadcom, two chips have their port counts flipped. The proper count is: 0x241 is 8 ports 0x242 is 4 ports Reported by Yohei Honda on kernel bz 10424. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-11Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-tiny-usb: New VID/PID pair i2c-davinci: Fix lost interrupt i2c-ibm_iic: Fast mode parm desc fixup
2008-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [NETNS][IPV6] tcp - assign the netns for timewait sockets [IPV4]: Fix byte value boundary check in do_ip_getsockopt(). BNX2X: Correct bringing chip out of reset [NETFILTER]: nf_nat: autoload IPv4 connection tracking [NETFILTER]: xt_hashlimit: fix mask calculation [XFRM]: xfrm_user: fix selector family initialization rt61pci: rt61pci_beacon_update do not free skb twice ssb-mipscore: Fix interrupt vectors ssb-pcicore: Fix IRQ TPS flag handling mac80211: use short_preamble mode from capability if ERP IE not present [NET]: Undo code bloat in hot paths due to print_mac(). [TCP]: Don't allow FRTO to take place while MTU is being probed [TCP]: tcp_simple_retransmit can cause S+L [TCP]: Fix NewReno's fast rexmit/recovery problems with GSOed skb [TCP]: Restore 2.6.24 mark_head_lost behavior for newreno/fack nl80211: fix STA AID bug b43legacy: fix bcm4303 crash iwlwifi: fix n-band association problem ipw2200: set MAC address on radiotap interface libertas: fix mode initialization problem
2008-04-11md: close a livelock window in handle_parity_checks5Dan Williams
If a failure is detected after a parity check operation has been initiated, but before it completes handle_parity_checks5 will never quiesce operations on the stripe. Explicitly handle this case by "canceling" the parity check, i.e. clear the STRIPE_OP_CHECK flags and queue the stripe on the handle list again to refresh any non-uptodate blocks. Kernel versions >= 2.6.23 are susceptible. Cc: <stable@kernel.org> Cc: NeilBrown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11cciss: error: implicit declaration of function 'sg_init_table'Mike Pagano
This patch adds the missing include directive <linux/scatterlist.h> to the cciss.c source file.   This was discovered by our release team when building the kernel for the Alpha architecture. Errors were found as references to functions 'sg_init_table' and 'sg_page' do not exist without the include for Alpha. Signed-off-by: Mike Pagano <mpagano@gentoo.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11rtc: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable RTC platform drivers, to re-enable module auto loading. [dbrownell@users.sourceforge.net: more drivers, minor fix] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11watchdog: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable watchdog drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11usb host: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable USB HCDs, to allow re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11usb gadget: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable usb peripheral drivers, to re-eable module auto loading. [dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11spi: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable SPI platform drivers, to allow module auto loading. [dbrownell@users.sourceforge.net: more drivers: registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11rtc: rtc-s35390a.c needs the bitreverse libraryRandy Dunlap
rtc-s35390a uses BITREVERSE functions so it needs to select that config symbol to ensure that the functions are built. drivers/built-in.o: In function `s35390a_set_datetime': linux-2.6.25-rc8-git7/drivers/rtc/rtc-s35390a.c:144: undefined reference to `byte_rev_table' drivers/built-in.o: In function `s35390a_get_datetime': linux-2.6.25-rc8-git7/drivers/rtc/rtc-s35390a.c:163: undefined reference to `byte_rev_table' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11i2c-tiny-usb: New VID/PID pairTill Harbaum
I have recently bought some USB PIDs from EZPrototypes for my USB projects and one will be for the i2c-tiny-usb. I have not yet started to use the new one in the official i2c-tiny-usb firmware since i think it makes sense to get the change into the kernel before releasing a modified firmware. This patch adds support for the EZPrototypes USB vid/pid pair used in later i2c-tiny-usb firmware versions (avrusb v1.06 and up, usbtiny v2.06 and up). Signed-off-by: Till Harbaum <Till@Harbaum.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-11i2c-davinci: Fix lost interruptTroy Kisky
DAVINCI_I2C_STR_REG is a write 1 to clear register, so don't use a read/modify/write cycle. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-11i2c-ibm_iic: Fast mode parm desc fixupPaul Mundt
Noticed this when grepping for fast mode module params, the i2c-ibm_iic driver was using a non-existent variable for MODULE_PARM_DESC. Fix it up to reflect what it's actually supposed to be describing. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-09BNX2X: Correct bringing chip out of resetEliezer Tamir
Fixed bug: Wrong register was written to when bringing the chip out of reset. [ Bump driver version and release date -DaveM ] Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-04-09rt61pci: rt61pci_beacon_update do not free skb twiceDaniel Wagner
The layer above will free the skb in an error case. Signed-off-by: Daniel Wagner <wagi@monom.org> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-09Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata/sata_fsl: Remove unused variable in sata_fsl_probe pata_sil680: Fix build on arch/ppc
2008-04-09ssb-mipscore: Fix interrupt vectorsMichael Buesch
This fixes assignment of the interrupt vectors on the SSB MIPS core. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-09ssb-pcicore: Fix IRQ TPS flag handlingLarry Finger
This fixes the TPS flag handling for the SSB pcicore driver. This fixes interrupts on some devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-09ata/sata_fsl: Remove unused variable in sata_fsl_probeJohann Felix Soden
In sata_fsl_probe memory is allocated but never used or deallocated. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10404 Thanks to Daniel Marjamäki for the bug report. Reported-by: Daniel Marjamäki <danielm77@spray.se> Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-04-09pata_sil680: Fix build on arch/ppcBenjamin Herrenschmidt
Commit 0f436eff54f90419ac1b8accfb3e6e17c4b49a4e breaks build on arch/ppc as it doesn't implement the machine_is() macro. This fixes it by using CONFIG_PPC_MERGE instead which represents arch/powerpc only, while CONFIG_PPC is set for both. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-04-08mtd/chips: add missing set_current_state() to cfi_{amdstd,staa}_sync()Dmitry Adamushko
cfi_amdstd_sync() and cfi_staa_sync() call schedule() without changing task's state appropriately. In case of e.g. chip->state == FL_ERASING, cfi_*_sync() will be busy-looping either redundantly for a fixed interval of time (for SCHED_NORMAL tasks) or possibly endlessly (for RT tasks and UP). Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08spi: spi_bfin5xx: remove unused labelMichael Hennerich
Remove unused label, and associated compiler warning. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08spi: spi_bfin5xx: fix probe() sequencingVitja Makarov
Fix bug in SPI probe: first initialize peripheral pins, and just after register spi master device. This fixes problems with SPI drivers built-in kernel. Singed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08spi: spi_bfin5xx build fixMike Frysinger
Fix breakage cause by overzealous line wrapping; there should be only one format string. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08acpi: fix "buggy BIOS check" when CPUs are hot removedAlok Kataria
Fixes a BUG in ACPI hotplugging. processor_device_array[pr->id] needs to be set to NULL when removing a CPU. Else the "buggy BIOS check" in acpi_processor_start mistakenly fires when a CPU is removed from the system and then later re-added. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: Dan Arai <arai@vmware.com> Cc: Len Brown <lenb@kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08acpi thermal: fix result checkKrzysztof Helt
thermal_zone_device_register() uses the ERR_PTR macro on its return values. A correct check is to use the IS_ERR() macro. The 2.6.25 kernels panic on Compaq AP550 without this patch as it has more then 10 (THERMAL_MAX_TRIPS) trip points (there are 12). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08ub: remove BUG() after __blk_end_request and fix the condition causing itPete Zaitcev
When __blk_end_request returns nonzero, it means that the request was not completely processed and some BIOs are still attached. Since we have dequeued it by that time, it means leaking requests and hanging processes, which is why BUG() was in there. In ub this happens if a packet request ends normally, but with residue (e.g. when scsi_id issues INQUIRY). The fix is to make sure that arguments passed to __blk_end_request are correct: the full request length and not just transferred length. The transferred length is indicated to applications by adjusting rq->data_len with old, unchanged code outside of this patch. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Cc: Greg KH <greg@kroah.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08[NET]: Undo code bloat in hot paths due to print_mac().David S. Miller
If print_mac() is used inside of a pr_debug() the compiler can't see that the call is redundant so still performs it even of pr_debug() ends up being a nop. So don't use print_mac() in such cases in hot code paths, use MAC_FMT et al. instead. As noted by Joe Perches, pr_debug() could be modified to handle this better, but that is a change to an interface used by the entire kernel and thus needs to be validated carefully. This here is thus the less risky fix for 2.6.25 Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-07b43legacy: fix bcm4303 crashStefano Brivio
This fixes an hard crash which happened upon driver loading on bcm4303 rev. 2 devices. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07iwlwifi: fix n-band association problemAbhijeet Kolekar
This patch enables the IWL4965_HT flag (n-band) in Kconfig. Removed the "depends on n" from Kconfig for config IWL4965_HT Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07ipw2200: set MAC address on radiotap interfaceDaniel Drake
Commit bada339ba24dee9e143bfb42e1dc61f146619846 enforces that all interfaces have a valid MAC address before they are brought up. ipw2200 does not assign a MAC address to it's radiotap interface, meaning that the radiotap interface cannot be brought up in 2.6.24. https://bugs.gentoo.org/show_bug.cgi?id=215714 Fix this by copying the MAC address from the real interface. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07libertas: fix mode initialization problemHolger Schurig
After moving lbs_find_best_network_ssid() from scan.c to assoc.c gcc was able to deduce that new_mode might stay uninitialized. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07pvrusb2: fix broken build due to patch order dependencyMichael Krufky
Fix broken build due to patch order dependency. A future patch requires the lines that break the current build. Disable those lines for now. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: siimage: fix kernel oops on PPC 44x
2008-04-07siimage: fix kernel oops on PPC 44xSergei Shtylyov
Fix kernel oops due to machine check occuring in init_chipset_siimage() on PPC 44x platforms. These 32-bit CPUs have 36-bit physical address and PCI I/O and memory spaces are mapped beyond 4 GB; arch/ppc/ code has a fixup in ioremap() that creates an illusion of the PCI I/O and memory resources being mapped below 4 GB, while arch/powerpc/ code got rid of this fixup with PPC 44x having instead CONFIG_RESOURCES_64BIT=y -- this causes the resources to be truncated to 32-bit 'unsigned long' type in this driver, and so non-existant memory being ioremap'ed and then accessed... Thanks to Valentine Barshak for providing an initial patch and explanations. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-07virtio_net: remove overzealous printkAnthony Liguori
The 'disable_cb' is really just a hint and as such, it's possible for more work to get queued up while callbacks are disabled. Under stress with an SMP guest, this printk triggers very frequently. There is no race here, this is how things are designed to work so let's just remove the printk. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07Revert "smc91x: fix build breakage from the SMC_GET_MAC_ADDR API upgrade"Linus Torvalds
This reverts commit 9e6db60825ef7e7999abc610ce256ba768e58162, which was merged without the API it needed, causing build breakage. Reported-by: Bryan Wu <cooloney@kernel.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07virtio: remove overzealous BUG_ON.Rusty Russell
The 'disable_cb' callback is designed as an optimization to tell the host we don't need callbacks now. As it is not reliable, the debug check is overzealous: it can happen on two CPUs at the same time. Document this. Even if it were reliable, the virtio_net driver doesn't disable callbacks on transmit so the START_USE/END_USE debugging reentrance protection can be easily tripped even on UP. Thanks to Balaji Rao for the bug report and testing. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: Balaji Rao <balajirrao@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: fix endian lossage in forcedeth net/tokenring/olympic.c section fixes net: marvell.c fix sparse shadowed variable warning [VLAN]: Fix egress priority mappings leak. [TG3]: Add PHY workaround for 5784 [NET]: srandom32 fixes for networking v2 [IPV6]: Fix refcounting for anycast dst entries. [IPV6]: inet6_dev on loopback should be kept until namespace stop. [IPV6]: Event type in addrconf_ifdown is mis-used. [ICMP]: Ensure that ICMP relookup maintains status quo
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 19:50:20 +0000