aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-10-12Fix Kconfig dependency for WM97xx battery driverLinus Torvalds
It needs the WM97xx touchscreen driver to be compiled in, not as a module. And it cannot itself be a module, due to some unfortunate interactions with platform data. Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-12Merge branch 'x86-core-v2-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip This merges in: x86/build, x86/microcode, x86/spinlocks, x86/memory-corruption-check, x86/early-printk, x86/xsave, x86/quirks, x86/setup, x86/signal, core/signal, x86/urgent, x86/xen * 'x86-core-v2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (142 commits) x86: make processor type select depend on CONFIG_EMBEDDED x86: extend processor type select help text x86, amd-iommu: propagate PCI device enabling error warnings: fix arch/x86/kernel/io_apic_64.c warnings: fix arch/x86/kernel/early_printk.c x86, fpu: check __clear_user() return value x86: memory corruption check - cleanup x86: ioperm user_regset xen: do not reserve 2 pages of padding between hypervisor and fixmap. xen: use spin_lock_nest_lock when pinning a pagetable x86: xsave: set FP, SSE bits in the xsave header in the user sigcontext x86: xsave: fix error condition in save_i387_xstate() x86: SB450: deprioritize DMI quirks x86: SB450: skip IRQ0 override if it is not routed to INT2 of IOAPIC x86: replace a magic number with a named constant in the VESA boot code x86 setup: remove IMAGE_OFFSET x86 setup: remove DEF_INITSEG and DEF_SETUPSEG Revert "x86: fix ghost EDD devices in /sys again" x86 setup: fix ghost entries under /sys/firmware/edd take 3 x86: signal: remove indent in restore_sigcontext() ...
2008-10-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (24 commits) MMC: Use timeout values from CSR MMC: CSD and CID timeout values sdhci: 'scratch' may be used uninitialized mmc: explicitly mention SDIO support in Kconfig mmc: remove redundant "depends on" Fix comment in include/linux/mmc/host.h sdio: high-speed support mmc_block: hard code 512 byte block size sdhci: force high speed capability on some controllers mmc_block: filter out PC requests mmc_block: indicate strict ordering mmc_block: inform block layer about sector count restriction sdio: give sdio irq thread a host specific name sdio: make sleep on error interruptable sdhci: reduce card detection delay sdhci: let the controller wait for busy state to end atmel-mci: Add missing flush_dcache_page() in PIO transfer code atmel-mci: Don't overwrite error bits when NOTBUSY is set atmel-mci: Add experimental DMA support atmel-mci: support multiple mmc slots ...
2008-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] orion5x_wdt.c: add spinlocking [WATCHDOG] Orion: add hardware watchdog support [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c [WATCHDOG] omap_wdt.c: another ioremap() fix [WATCHDOG] omap_wdt.c: sync linux-omap changes [WATCHDOG] Add AT91SAM9X watchdog [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
2008-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (180 commits) leo: disable cursor when leaving graphics mode cg6: disable cursor when leaving graphics mode sparc32: sun4m interrupt mask cleanup drivers/rtc/Kconfig: don't build rtc-cmos.o on sparc32 sparc: arch/sparc/kernel/pmc.c -- extra #include? sparc32: Add more extensive documentation of sun4m interrupts. sparc32: Kill irq_rcvreg from sun4m_irq.c sparc32: Delete master_l10_limit. sparc32: Use PROM device probing for sun4c timers. sparc32: Use PROM device probing for sun4c interrupt register. sparc32: Delete claim_ticker14(). sparc32: Stop calling claim_ticker14() from sun4c_irq.c sparc32: Kill clear_profile_irq btfixup entry. sparc32: Call sun4m_clear_profile_irq() directly from sun4m_smp.c sparc32: Remove #if 0'd code from sun4c_irq.c sparc32: Remove some SMP ifdefs in sun4d_irq.c sparc32: Use PROM infrastructure for probing and mapping sun4d timers. sparc32: Use PROM device probing for sun4m irq registers. sparc32: Use PROM device probing for sun4m timer registers. sparc: Fix user_regset 'n' field values. ...
2008-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: smc911x: Fix external PHY detection e1000: allow VLAN devices to use TSO and CSUM offload gre: Initialise rtnl_link tunnel parameters properly ipvs: Add proper dependencies on IP_VS, and fix description header line.
2008-10-12Fix RTC wakealarm sysfs interface breakage.Linus Torvalds
Commit ed458df4d2470adc02762a87a9ad665d0b1a2bd4 ("PnP: move pnpacpi/pnpbios_init to after PCI init") moved the PnP RTC discovery later, and now the ACPI RTC glue code doesn't find it any more, breaking the RTC wakealarm sysfs interfaces, as reported by Rafael. This really is fairly messy, and we have several annoying ordering constraints here - the PnP code that sets up the RTC resources wants to run after the PCI resources have to be registered, which in turn needs to run after ACPI has at least enumerated the root PCI buses etc. Our initcall ordering is not fine-grained enough to make this all painless. So this moves the ACPI RTC glue ("acpi_rtc_init()") down to a regular module call, which fixes the problem Rafael has. The reason this isn't wonderful is that we really should do acpi_rtc_init before we do the rtc_cmos init, and now those two are in the same module_init() section. Which happens to work, but only because drivers/rtc is linked after drivers/acpi. In other words, we still have a very subtle ordering issue here. Grr. Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-12Merge branches 'x86/xen', 'x86/build', 'x86/microcode', 'x86/mm-debug-v2', ↵Ingo Molnar
'x86/memory-corruption-check', 'x86/early-printk', 'x86/xsave', 'x86/ptrace-v2', 'x86/quirks', 'x86/setup', 'x86/spinlocks' and 'x86/signal' into x86/core-v2
2008-10-12x86: memory corruption check - cleanupIngo Molnar
Move the prototypes from the generic kernel.h header to the more appropriate include/asm-x86/bios_ebda.h header file. Also, remove the check from the power management code - this is a pure x86 matter for now. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-12Merge branch 'linus' into x86/memory-corruption-checkIngo Molnar
2008-10-12Merge branch 'linus' into x86/xenIngo Molnar
Conflicts: arch/x86/kernel/cpu/common.c arch/x86/kernel/process_64.c arch/x86/xen/enlighten.c
2008-10-12Merge branch 'master' of ↵Pierre Ossman
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/atmel-mci-2.6.28 Conflicts: drivers/mmc/host/atmel-mci.c
2008-10-12MMC: Use timeout values from CSRMatthew Fleming
Hard-coded timeout values of 250ms for writes and 100ms for reads are currently used for MMC transactions over SPI. The spec states that the timeout values from the card should be used. Signed-off-by: Matthew Fleming <matthew.fleming@imgtec.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12MMC: CSD and CID timeout valuesMatthew Fleming
The MMC spec states that the timeout for accessing the CSD and CID registers is 64 clock cycles. Signed-off-by: Matthew Fleming <matthew.fleming@imgtec.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: 'scratch' may be used uninitializedSteven Noonan
The variable 'scratch' is always initialized before it's used. The conditional which is responsible for initialization of 'scratch' will always evaluate 'true' when the first loop iteration occurs, and thus, it's properly initialized. GCC doesn't see this, of course, so using the uninitialized_var() macro seems to work for silencing this case. Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc: explicitly mention SDIO support in KconfigPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc: remove redundant "depends on"Pierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdio: high-speed supportPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: hard code 512 byte block sizePierre Ossman
We use 512 byte blocks on all cards, and newer cards support nothing else, so hard code it and make the code less complex. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: force high speed capability on some controllersPierre Ossman
Some high speed capable controllers forget to set the high speed capability bit. Make sure we enable the functionality anyway. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: filter out PC requestsPierre Ossman
We do not support PC (SCSI) commands, so don't pretend we do by letting them through. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: indicate strict orderingPierre Ossman
The MMC block driver services requests one at a time and in strict order. Indicate this to the block layer so that it can handle barriers in an efficient manner. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: inform block layer about sector count restrictionPierre Ossman
Make sure we consider the maximum block count when we tell the block layer about the maximum sector count. That way we don't have to chop up the request ourselves. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdio: give sdio irq thread a host specific namePierre Ossman
There is one thread per host controller so make sure they all get unique names. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdio: make sleep on error interruptablePierre Ossman
Make sure we can be woken from the forced sleep that is done on errors. Removing a card often results in -ENOMEDIUM or -EILSEQ so we previously locked up the removal process for a second. We could completely exit on -ENOMEDIUM, but it might be a transient glitch so treat it like any other error. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: reduce card detection delayPierre Ossman
The card detection delay was added early when the behaviour of the card interrupt was still very much unknown (i.e. before there was a public specification). As it is now known that it is a debounced signal, reduce the delay to something more sensible. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: let the controller wait for busy state to endPierre Ossman
The sdhci controllers can interrupt us when the busy state from the card has ended, saving CPU cycles and power. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-11smc911x: Fix external PHY detectionGuennadi Liakhovetski
If an external PHY is found the driver falls through to the default case in the switch and overwrites the PHY ID. Add the missing break. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (71 commits) ide: Remove ide_spin_wait_hwgroup() and use special requests instead ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to <linux/ide.h> ide: add ide_do_test_unit_ready() helper ide: add ide_do_start_stop() helper ide: add ide_set_media_lock() helper ide-floppy: move floppy ioctls handling to ide-floppy_ioctl.c ide-floppy: ->{srfp,wp} -> IDE_AFLAG_{SRFP,WP} ide: add ide_queue_pc_tail() helper ide: add ide_queue_pc_head() helper ide: add ide_init_pc() helper ide-tape: add ide_tape_set_media_lock() helper ide-floppy: add ide_floppy_set_media_lock() helper ide: add ide_io_buffers() helper ide-scsi: cleanup ide_scsi_io_buffers() ide-floppy: remove MODE_SENSE_* defines ide-{floppy,tape}: remove packet command stack ide-{floppy,tape}: remove request stack ide-generic: handle probing of legacy io-ports v5 ide-floppy: use scatterlists for pio transfers ide-tape: remove idetape_init_rq() ...
2008-10-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: sound/core/memalloc.c
2008-10-11e1000: allow VLAN devices to use TSO and CSUM offloadPatrick McHardy
This patch changes e1000 to set vlan_features so TSO and CSUM offload can be used by VLAN devices, similar as with the other Intel drivers. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-11Merge phase #4 (X2APIC, APIC unification, CPU identification unification) of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-v28-for-linus-phase4-D' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (186 commits) x86, debug: print more information about unknown CPUs x86 setup: handle more than 8 CPU flag words x86: cpuid, fix typo x86: move transmeta cap read to early_init_transmeta() x86: identify_cpu_without_cpuid v2 x86: extended "flags" to show virtualization HW feature in /proc/cpuinfo x86: move VMX MSRs to msr-index.h x86: centaur_64.c remove duplicated setting of CONSTANT_TSC x86: intel.c put workaround for old cpus together x86: let intel 64-bit use intel.c x86: make intel_64.c the same as intel.c x86: make intel.c have 64-bit support code x86: little clean up of intel.c/intel_64.c x86: make 64 bit to use amd.c x86: make amd_64 have 32 bit code x86: make amd.c have 64bit support code x86: merge header in amd_64.c x86: add srat_detect_node for amd64 x86: remove duplicated force_mwait x86: cpu make amd.c more like amd_64.c v2 ...
2008-10-11Merge branch 'x86/apic' into x86-v28-for-linus-phase4-BIngo Molnar
Conflicts: arch/x86/kernel/apic_32.c arch/x86/kernel/apic_64.c arch/x86/kernel/setup.c drivers/pci/intel-iommu.c include/asm-x86/cpufeature.h include/asm-x86/dma-mapping.h
2008-10-11Merge phase #3 (IOMMU) of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-v28-for-linus-phase3-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits) AMD IOMMU: use iommu_device_max_index, fix AMD IOMMU: use iommu_device_max_index x86: add PCI IDs for AMD Barcelona PCI devices x86/iommu: use __GFP_ZERO instead of memset for GART x86/iommu: convert GART need_flush to bool x86/iommu: make GART driver checkpatch clean x86 gart: remove unnecessary initialization x86: restore old GART alloc_coherent behavior revert "x86: make GART to respect device's dma_mask about virtual mappings" x86: export pci-nommu's alloc_coherent iommu: remove fullflush and nofullflush in IOMMU generic option x86: remove set_bit_string() iommu: export iommu_area_reserve helper function AMD IOMMU: use coherent_dma_mask in alloc_coherent add AMD IOMMU tree to MAINTAINERS file AMD IOMMU: use cmd_buf_size when freeing the command buffer AMD IOMMU: calculate IVHD size with a function AMD IOMMU: remove unnecessary cast to u64 in the init code AMD IOMMU: free domain bitmap with its allocation order AMD IOMMU: simplify dma_mask_to_pages ...
2008-10-11Merge phase #2 (PAT updates) of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-v28-for-linus-phase2-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) x86, cpa: make the kernel physical mapping initialization a two pass sequence, fix x86, pat: cleanups x86: fix pagetable init 64-bit breakage x86: track memtype for RAM in page struct x86, cpa: srlz cpa(), global flush tlb after splitting big page and before doing cpa x86, cpa: remove cpa pool code x86, cpa: no need to check alias for __set_pages_p/__set_pages_np x86, cpa: dont use large pages for kernel identity mapping with DEBUG_PAGEALLOC x86, cpa: make the kernel physical mapping initialization a two pass sequence x86, cpa: remove USER permission from the very early identity mapping attribute x86, cpa: rename PTE attribute macros for kernel direct mapping in early boot x86: make sure the CPA test code's use of _PAGE_UNUSED1 is obvious linux-next: fix x86 tree build failure x86: have set_memory_array_{uc,wb} coalesce memtypes, fix agp: enable optimized agp_alloc_pages methods x86: have set_memory_array_{uc,wb} coalesce memtypes. x86: {reverve,free}_memtype() take a physical address x86: fix pageattr-test agp: add agp_generic_destroy_pages() agp: generic_alloc_pages() ...
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-11security: avoid calling a NULL function pointer in drivers/video/tvaudio.cArjan van de Ven
NULL function pointers are very bad security wise. This one got caught by kerneloops.org quite a few times, so it's happening in the field.... Fix is simple, check the function pointer for NULL, like 6 other places in the same function are already doing. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits) myri10ge: update driver version number to 1.4.3-1.369 r8169: add shutdown handler r8169: preliminary 8168d support r8169: support additional 8168cp chipset r8169: change default behavior for mildly identified 8168c chipsets r8169: add a new 8168cp flavor r8169: add a new 8168c flavor (bis) r8169: add a new 8168c flavor r8169: sync existing 8168 device hardware start sequences with vendor driver r8169: 8168b Tx performance tweak r8169: make room for more specific 8168 hardware start procedure r8169: shuffle some registers handling around (8168 operation only) r8169: new phy init parameters for the 8168b r8169: update phy init parameters r8169: wake up the PHY of the 8168 af_key: fix SADB_X_SPDDELETE response ath9k: Fix return code when ath9k_hw_setpower() fails on reset ath9k: remove nasty FAIL macro from ath9k_hw_reset() gre: minor cleanups in netlink interface gre: fix copy and paste error ...
2008-10-11Merge branch 'for-linus' of git://git.alsa-project.org/alsa-kernelLinus Torvalds
* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits) ALSA: hda: VREF powerdown for headphones ALSA: hda: STAC_HP_M4 ALSA: ASoC: Check for machine type in GTA01 machine driver ALSA: mtpav - Fix race in probe ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk ALSA: Add a note on dependency of RTC stuff ALSA: ASoC: add new param mux to dapm_mux_update_power ALSA: Increase components array size ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver ALSA: hda: comment typo fix ALSA: hda: comment typo fix ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI ALSA: snd-usb-audio: support for Edirol UA-4FX device ALSA: usb - Fix possible Oops at USB-MIDI disconnection ALSA: hda - Fix another ALC889A (rev 0x100101) ALSA: hda: add more board-specific information for Realtek ALC662 rev1 ALSA: Correct Vladimir Barinov's e-mail address ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards ALSA: hda: SPDIF stream muting support ALSA: hda: appletv support ...
2008-10-11Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (27 commits) [S390] Fix checkstack for s390 [S390] fix initialization of stp [S390] 3215: Remove tasklet. [S390] console flush on panic / reboot [S390] introduce dirty bit for kvm live migration [S390] Add ioctl support for EMC Symmetrix Subsystem Control I/O [S390] xpram: per device block request queues. [S390] dasd: fix message flood for unsolicited interrupts [S390] Move private simple udelay function to arch/s390/lib/delay.c. [S390] dcssblk: add >2G DCSSs support and stacked contiguous DCSSs support. [S390] ptrace changes [S390] s390: use sys_pause for 31bit pause entry point [S390] qdio enhanced SIGA (iqdio) support. [S390] cio: fix cio_tpi. [S390] cio: Correct use of ! and & [S390] cio: inline assembly cleanup [S390] bus_id -> dev_set_name() for css and ccw busses [S390] bus_id ->dev_name() conversions in qdio [S390] Use s390_root_dev_* in kvm_virtio. [S390] more bus_id -> dev_name conversions ...
2008-10-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix BUG: using smp_processor_id() in preemptible code [CPUFREQ] Don't export governors for default governor [CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governor [CPUFREQ][5/6] cpufreq: Changes to get_cpu_idle_time_us(), used by ondemand governor [CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differential [CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for idle-microaccounting [CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software coordination [CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg() [CPUFREQ] use deferrable delayed work init in conservative governor [CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving cpufreq_cpu_put [CPUFREQ] add error handling for cpufreq_register_governor() error [CPUFREQ] acpi-cpufreq: add error handling for cpufreq_register_driver() error [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/powernow-k6.c [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/elanfreq.c
2008-10-10Merge branch 'r8169' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2008-10-10myri10ge: update driver version number to 1.4.3-1.369Brice Goglin
Update myri10ge driver version number to 1.4.3-1.369. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-10r8169: add shutdown handlerFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: preliminary 8168d supportFrancois Romieu
Taken from Realtek's 8.007.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Ivan Vecera <ivecera@redhat.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: support additional 8168cp chipsetFrancois Romieu
Taken from Realtek's 8.007.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Ivan Vecera <ivecera@redhat.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: change default behavior for mildly identified 8168c chipsetsFrancois Romieu
The addition of a new device has so far implied a specialization of these masks. While they identify 8168c devices, they can be expected to be further refined as they have been by Realtek so far. The change should bring the driver closer to the version 8.006.00 of Realtek's 8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: add a new 8168cp flavorFrancois Romieu
Taken from Realtek's 8.006.00 r8168 driver. I have left some bits related to jumbo frame aside for now. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: add a new 8168c flavor (bis)Francois Romieu
Taken from Realtek's 8.006.00 r8168 driver. I have left some bits related to jumbo frame aside for now. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: add a new 8168c flavorFrancois Romieu
Taken from Realtek's 8.006.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>