aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-03-20[TG3]: update version and reldateMichael Chan
Update version to 3.52. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add firmware version infoMichael Chan
Add fw_version information to ethtool -i. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: nvram cleanupMichael Chan
Some nvram related cleanup: 1. Add a tg3_nvram_read_swab() since swabing the data is frequently done. 2. Add a function to convert nvram address to physical address instead of doing it in 2 separate places. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Fixup memory test for 5787Michael Chan
Ethtool memory test on 5787 requires a new memory table. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add new one-shot MSI handlerMichael Chan
Support one-shot MSI on 5787. This one-shot MSI idea is credited to David Miller. In this mode, MSI disables itself automatically after it is generated, saving the driver a register access to disable it for NAPI. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add ipv6 checksum supportMichael Chan
Support ipv6 tx csum on 5787 by setting NETIF_F_HW_CSUM. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add new hard_start_xmitMichael Chan
Support 5787 hardware TSO using a new flag TG3_FLG2_HW_TSO_2. Since the TSO interface is slightly different and these chips have finally fixed the 4GB DMA problem and do not have the 40-bit DMA problem, a new hard_start_xmit is used for these chips. All previous chips will use the old hard_start_xmit that is now renamed tg3_start_xmit_dma_bug(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add 5787 nvram supportMichael Chan
Support additional nvrams and new nvram format for 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add 5787 and 5754 basic supportMichael Chan
Add basic support for 2 new chips 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[NET]: Move destructor from neigh->ops to neigh_paramsMichael S. Tsirkin
struct neigh_ops currently has a destructor field, which no in-kernel drivers outside of infiniband use. The infiniband/ulp/ipoib in-tree driver stashes some info in the neighbour structure (the results of the second-stage lookup from ARP results to real link-level path), and it uses neigh->ops->destructor to get a callback so it can clean up this extra info when a neighbour is freed. We've run into problems with this: since the destructor is in an ops field that is shared between neighbours that may belong to different net devices, there's no way to set/clear it safely. The following patch moves this field to neigh_parms where it can be safely set, together with its twin neigh_setup. Two additional patches in the patch series update ipoib to use this new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[NET]: Convert RTNL to mutex.Stephen Hemminger
This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[CONNECTOR]: Use netlink_has_listeners() to avoind unnecessary allocations.Evgeniy Polyakov
Return -ESRCH from cn_netlink_send() when there are not listeners, just as it could be done by netlink_broadcast(). Propagate netlink_broadcast() error back to the caller. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: TOIM3232 dongle supportDavid Basden
Here goes a patch for supporting TOIM3232 based serial IrDA dongles. The code is based on the tekram dongle code. It's been tested with a TOIM3232 based IRWave 320S dongle. It may work for TOIM4232 dongles, although it's not been tested. Signed-off-by: David Basden <davidb-irda@rcpt.to> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Fix tg3_get_ringparam()Michael Chan
Fix-up tg3_get_ringparam() to return the correct parameters. Set the jumbo rx ring parameter only if it is supported by the chip and currently in use. Add missing value for tx_max_pending, noticed by Rick Jones. Update version to 3.51. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add some missing netif_running() checksMichael Chan
Add missing netif_running() checks in tg3's dev->set_multicast_list() and dev->set_mac_address(). If not netif_running(), these 2 calls can simply return 0 after storing the new settings if required. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: pci_register_driver conversionChristophe Lucas
This patch converts 2 IrDA drivers pci_module_init() calls to pci_register_driver(). Signed-off-by: Christophe Lucas <clucas@ifrance.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: sti/cli removal from EP7211 IrDA driverDavid chosrova
This patch replaces the deprecated sti/cli routines with the corresponding spin_lock ones. Signed-off-by: David chosrova <david.chosrova@libertysurf.fr> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: nsc-ircc: support for yet another Thinkpad IrDA chipsetJean Tourrilhes
This patch simply adds support for a variation of the nsc-ircc PC8739x chipset, found in some IBM Thinkpad laptops. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: nsc-ircc: PM updateDmitry Torokhov
This patch brings the nsc-ircc code to a more up to date power management scheme, following the current device model. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: nsc-ircc: ISAPnP supportJean Tourrilhes
This enables PnP support for the nsc-ircc chipset. Since we can't fetch the chipset cfg_base from the PnP layer, we just use the PnP information as one more hint when probing the chip. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: include <linux/vmalloc.h>Michael Chan
Include <linux/vmalloc.h> so that it compiles properly on all archs. Update version to 1.4.38. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Update versionMichael Chan
Update version to 1.4.37. Add missing flush_scheduled_work() in bnx2_suspend as noted by Jeff Garzik. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Support larger rx ring sizes (part 2)Michael Chan
Support bigger rx ring sizes (up to 1020) in the rx fast path. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Support larger rx ring sizes (part 1)Michael Chan
Increase maximum receive ring size from 255 to 1020 by supporting up to 4 linked pages of receive descriptors. To accomodate the higher memory usage, each physical descriptor page is allocated separately and the software ring that keeps track of the SKBs and the DMA addresses is allocated using vmalloc. Some of the receive-related fields in the bp structure are re- organized a bit for better locality of reference. The max. was reduced to 1020 from 4080 after discussion with David Miller. This patch contains ring init code changes only. This next patch contains rx data path code changes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Fix bug when rx ring is fullMichael Chan
Fix the rx code path that does not handle the full rx ring correctly. When the rx ring is set to the max. size (i.e. 255), the consumer and producer indices will be the same when completing an rx packet. Fix the rx code to handle this condition properly. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Add ethtool -d supportMichael Chan
Add ETHTOOL_GREGS support. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Reduce register test sizeMichael Chan
Eliminate some of the registers in ethtool register test to reduce driver size. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Update version and reldateMichael Chan
Update version to 3.50. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Support shutdown WoL.Michael Chan
Support WoL during shutdown by calling tg3_set_power_state(tp, PCI_D3hot) during tg3_close(). Change the power state parameter to pci_power_t type and use constants defined in pci.h. Certain ethtool operations cannot be performed after tg3_close() because the device will go to low power state. Add return -EAGAIN in such cases where appropriate. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Enable TSO by defaultMichael Chan
Enable TSO by default on newer chips that support TSO in hardware. Leave TSO off by default on older chips that do firmware TSO because performance is slightly lower. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add support for 5714S and 5715SMichael Chan
Add support for 5714S and 5715S. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[libata] sata_mv: fix irq port status usageJeff Garzik
Interrupt handler did not properly initialize a variable on a per-port basis, leading to incorrect behavior on ports other than port 0. Bug caught and fixed by Mark Lord. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-20[PATCH] USB: omninet: fix up debugging commentsGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB serial: add navman driverGreg Kroah-Hartman
Thanks to Warren Lewis <wlewis@scn.org> for the information needed to write the driver and for testing it out. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: Fix irda-usb use after useEugene Teo
Don't read from free'd memory after calling netif_rx(). docopy is used as a boolean (0 and 1) so unsigned int is sufficient. Coverity bug #928 Signed-off-by: Eugene Teo <eugene.teo@eugeneteo.net> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: rtl8150 small fixPetko Manolov
This one is about announcing the device registration after the last check has been made. From: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: ftdi_sio: add Icom ID1 USB product and vendor idsA. Maitland Bottoms
The Icom ID-1 1.2 GHz band digital transceiver is a new radio that has a USB interface. With this patch, the ftdi_sio driver will report "Detected FT8U232AM" and provide a serial device interface. Signed-off-by: "A. Maitland Bottoms" <bottoms@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: cp2101: add new device IDsCraig Shelley
This patch adds a new device ID to the cp2101 driver Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: fix check_ctrlrecip to allow control transfers in state ADDRESSHorst Schirmeier
check_ctrlrecip() disallows any control transfers if the device is deconfigured (in configuration 0, ie. state ADDRESS). This for example makes it impossible to read the device descriptors without configuring the device, although most standard device requests are allowed in this state by the spec. This patch allows control transfers for the ADDRESS state, too. Signed-off-by: Horst Schirmeier <horst@schirmeier.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: vicam.c: fix a NULL pointer dereferenceAdrian Bunk
This patch fixes a NULL pointer dereference spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: ZC0301 driver bugfixLuca Risolia
ZC0301 driver bugfix. Use correct PID/VID USB entries. Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: add support for Creativelabs Silvercrest USB keyboardWolfgang Rohdewald
Signed-off-by: Wolfgang Rohdewald <wolfgang@rohdewald.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: storage: new unusual_devs.h entry: Mitsumi 7in1 Card ReaderRodolfo Quesada
This patch (as661) adds an unusual_devs entry for the Mitsumi 7in1 Card Reader. From: Rodolfo Quesada <rquesada@roqz.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: storage: unusual_devs.h entry 0420:0001Pete Zaitcev
Ref https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=176584 Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: storage: another unusual_devs.h entryPete Zaitcev
Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: storage: sandisk unusual_devices entryPhil Dibowitz
The following adds an unusual_devs entry for the SanDisk ImageMate CompactFlash USB drive, for the US_FL_FIX_CAPACITY flag. Additionally, it removes trailing whitespace from the previous entry. It's based on the patch sent by Roman Hodek <roman@hodek.net>. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: fix initdata issue in isp116x-hcdGreg Kroah-Hartman
As found by Sam's scripts. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: usbcore: usb_set_configuration oops (NULL ptr dereference)Horst Schirmeier
When trying to deconfigure a device via usb_set_configuration(dev, 0), 2.6.16-rc kernels after 55c527187c9d78f840b284d596a0b298bc1493af oops with "Unable to handle NULL pointer dereference at...". This is due to an unchecked dereference of cp in the power budget part. Signed-off-by: Horst Schirmeier <horst@schirmeier.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: usbcore: Don't assume a USB configuration includes any interfacesAlan Stern
In a couple of places, usbcore assumes that a USB device configuration will have a nonzero number of interfaces. Having no interfaces may or may not be allowed by the USB spec; in any event we shouldn't die if we encounter such a thing. This patch (as662) removes the assumptions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: ub 03 drop stall clearingPete Zaitcev
Matt mentioned that a very old ZIP-100 actually does need this, but I am yet to see anyone who actually has one still working and uses ub with it. He/she must be a retrocomputing geek, who can easily bias it to usb-storage with libusual, if needed. Meanwhile, common folks have trouble with poorly designed USB keys and some el-cheapo European music players. I think we better drop this for now. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 00:56:30 +0000