aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-01-23[PATCH] rtc-sh: act on rtc_wkalrm.enabled when setting an alarmJamie Lenehan
This fixes the SH rtc driver correctly act on the "enabled" flag when setting an alarm. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23[PATCH] KVM: fix bogus pagefault on writable pagesAvi Kivity
If a page is marked as dirty in the guest pte, set_pte_common() can set the writable bit on newly-instantiated shadow pte. This optimization avoids a write fault after the initial read fault. However, if a write fault instantiates the pte, fix_write_pf() incorrectly reports the fault as a guest page fault, and the guest oopses on what appears to be a correctly-mapped page. Fix is to detect the condition and only report a guest page fault on a user access to a kernel page. With the fix, a kvm guest can survive a whole night of running the kernel hacker's screensaver (make -j9 in a loop). Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23[PATCH] KVM: x86 emulator: fix bit string instructionsAvi Kivity
The various bit string instructions (bts, btc, etc.) fail to adjust the address correctly if the bit address is beyond BITS_PER_LONG. This bug creeped in as the emulator originally relied on cr2 to contain the memory address; however we now decode it from the mod r/m bits, and must adjust the offset to account for large bit indices. The patch is rather large because it switches src and dst decoding around, so that the bit index is available when decoding the memory address. This fixes workloads like the FC5 installer. Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23[PATCH] KVM: fix race between mmio reads and injected interruptsAvi Kivity
The kvm mmio read path looks like: 1. guest read faults 2. kvm emulates read, calls emulator_read_emulated() 3. fails as a read requires userspace help 4. exit to userspace 5. userspace emulates read, kvm sets vcpu->mmio_read_completed 6. re-enter guest, fault again 7. kvm emulates read, calls emulator_read_emulated() 8. succeeds as vcpu->mmio_read_emulated is set 9. instruction completes and guest is resumed A problem surfaces if the userspace exit (step 5) also requests an interrupt injection. In that case, the guest does not re-execute the original instruction, but the interrupt handler. The next time an mmio read is exectued (likely for a different address), step 3 will find vcpu->mmio_read_completed set and return the value read for the original instruction. The problem manifested itself in a few annoying ways: - little squares appear randomly on console when switching virtual terminals - ne2000 fails under nfs read load - rtl8139 complains about "pci errors" even though the device model is incapable of issuing them. Fix by skipping interrupt injection if an mmio read is pending. A better fix is to avoid re-entry into the guest, and re-emulating immediately instead. However that's a bit more complex. Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23[PATCH] KVM: make sure there is a vcpu context loaded when destroying the mmuAvi Kivity
This makes the vmwrite errors on vm shutdown go away. Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-22Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (84 commits) [JFFS2] debug.h: include <linux/sched.h> for current->pid [MTD] OneNAND: Handle DDP chip boundary during read-while-load [MTD] OneNAND: return ecc error code only when 2-bit ecc occurs [MTD] OneNAND: Implement read-while-load [MTD] OneNAND: fix onenand_wait bug in read ecc error [MTD] OneNAND: release CPU in cycles [MTD] OneNAND: add subpage write support [MTD] OneNAND: fix onenand_wait bug [JFFS2] use the ref_offset macro [JFFS2] Reschedule in loops [JFFS2] Fix error-path leak in summary scan [JFFS2] add cond_resched() when garbage collecting deletion dirent [MTD] Nuke IVR leftovers [MTD] OneNAND: fix oob handling in recent oob patch [MTD] Fix ssfdc blksize typo [JFFS2] replace kmalloc+memset with kzalloc [MTD] Fix SSFDC build for variable blocksize. [MTD] ESB2ROM uses PCI [MTD] of_device-based physmap driver [MTD] Support combined RedBoot FIS directory and configuration area ...
2007-01-22[PATCH] vmx: Fix register constraint in launch codeHerbert Xu
Both "=r" and "=g" breaks my build on i386: $ make CC [M] drivers/kvm/vmx.o {standard input}: Assembler messages: {standard input}:3318: Error: bad register name `%sil' make[1]: *** [drivers/kvm/vmx.o] Error 1 make: *** [_module_drivers/kvm] Error 2 The reason is that setbe requires an 8-bit register but "=r" does not constrain the target register to be one that has an 8-bit version on i386. According to http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10153 the correct constraint is "=q". Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-22Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: fix pci-driver kernel-doc PCI: rework Documentation/pci.txt PCI: Unhide the SMBus on the Asus P4P800-X
2007-01-22Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: unusual_devs.h entry for nokia 6233 USB: Fix for typo in ohci-ep93xx.c USB: disable USB_MULTITHREAD_PROBE USB: add vendor/device id for Option GT Max 3.6 cards USB: unusual_devs.h for 0x046b:ff40 USB: make usbhid ignore Imation Disc Stakka USB: rndis_host: fix crash while probing a Nokia S60 mobile USB: asix: Detect internal PHY and enable/use accordingly usbtouchscreen: make ITM screens report BTN_TOUCH as zero when not touched
2007-01-22PCI: fix pci-driver kernel-docRandy Dunlap
Function short description should be on only one line. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22PCI: Unhide the SMBus on the Asus P4P800-XJean Delvare
Unhide the SMBus on the Asus P4P800-X (and probably some other models of the family.) This gives access to the memory module SPD EEPROMs. Thanks to Winbond for supporting the lm-sensors project with the donation of this motherboard. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: unusual_devs.h entry for nokia 6233Manuel Osdoba
In appendix a patch for the nokia 6233 mobile phone is included. The patch is against 2.6.20-rc5. It is my first patch. Hopefully it has the right format. The code makes my nokia 6233 on my computer work. From: Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: Fix for typo in ohci-ep93xx.cPetr Stetiar
Attached patch fixes typo in USB driver reported by Chase Douglas on linux-cirrus mailing list. http://www.freelists.org/archives/linux-cirrus/12-2006/msg00003.html Signed-off-by: Petr Stetiar <ynezz@true.cz> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: disable USB_MULTITHREAD_PROBEGreg Kroah-Hartman
Disable the USB_MULTITHREAD_PROBE option because it causes crashes on people's machines and they never remember to actually read the config help files. No one likes this, everyone hates it, I'm going to go eat worms... The full logic will be ripped out later. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: add vendor/device id for Option GT Max 3.6 cardsgarrett_damore@tadpole.com
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7814 Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: unusual_devs.h for 0x046b:ff40Pete Zaitcev
American Megatrends did something wrong in their floppy emulator. It breaks with both kinds of MODE SENSE which our stack sends. Alan and I tried a few tweaks, and got LUNs sensed right, but US_FL_NO_WP_DETECT is still needed. I set the firmware bracket to 1.00 exactly, in case AMI or Sun fix it with a firmware update. Hey, you never know. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: make usbhid ignore Imation Disc StakkaOliver Neukum
on request of the sourceforge project for this device, a kind of robotized CD storage, it should be ignored by the generic driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: rndis_host: fix crash while probing a Nokia S60 mobileDaniel Gollub
Bug fix for driver rndis_host which fixes rndis_host probing certain Nokia S60 (Series 60) mobiles. While the rndis_host get probed by usbnet and tries to bind the Nokia mobile the bind is going to fail. The rndis_host module tries to release the device, in a wrong way, which cause the oops. Fixes Bugzilla #7201 Signed-off-by: Daniel Gollub <dgollub@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: asix: Detect internal PHY and enable/use accordinglyAndres Salomon
Different AX88772 dongles use different PHYs; the chip is capable of using both a primary and secondary PHY, and supports an internal and external PHY. It appears that some DUB-E100 devices use the internal PHY, so trying to use an external one will not work (note that this is different across revisions, as well; the "A" and "B" revs of the DUB-E100 use different PHYs!). The data sheet for the AX88772 chip specifies that the internal PHY id will be 0x10, so if that's read from the EEPROM, we should use that rather than attempting to use an external PHY. Thanks to Mitch Bradley for pointing this out! Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: David Hollis <dhollis@davehollis.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22usbtouchscreen: make ITM screens report BTN_TOUCH as zero when not touchedDaniel Ritz
ITM screens send invalid x/y data when not touched. this was fixes a while ago but the problem is if the screen is not touched anymore the driver never does not report BTN_TOUCH as zero. fix it by sending the report with the last valid coordinates when pressure is released. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: J.P. Delport <jpdelport@csir.co.za> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: sis190: failure to set the MAC address from EEPROM Fix phy_read/write redefinition errors in ucc_geth_phy.c Update ucc_geth.c for new workqueue structure myri10ge: update driver version to 1.2.0 myri10ge: check that we can get an irq myri10ge: make wc_fifo usage load-time tunable 8139cp: Don't blindly enable interrupts [PATCH] bcm43xx: Fix failure to deliver PCI-E interrupts
2007-01-22Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv HighPoint 2310 support (88SX7042) libata: fix handling of port actions in per-dev action mask libata: initialize qc->dma_dir to DMA_NONE sata_via: add PCI ID 0x5337 libata doc: "error : unterminated entity reference exceptions"
2007-01-22Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (30 commits) [SCSI] qla1280: set residual correctly [SCSI] fusion: bump version [SCSI] fusion: MODULE_VERSION support [SCSI] fusion: power pc and miscellaneous bug fixs [SCSI] fusion: fibre channel: return DID_ERROR for MPI_IOCSTATUS_SCSI_IOC_TERMINATED [SCSI] megaraid_sas: Update module author [SCSI] 3ware 8000 serialize reset code [SCSI] sr: fix error code check in sr_block_ioctl() [SCSI] scsi: lpfc error path fix [SCSI] aacraid: Product List Update [SCSI] libiscsi: fix senselen calculation [SCSI] iscsi: simplify IPv6 and IPv4 address printing [SCSI] iscsi: newline in printk [SCSI] iscsi: fix crypto_alloc_hash() error check [SCSI] iscsi: fix 2.6.19 data digest calculation bug [SCSI] scsi_scan: fix report lun problems with CDROM or RBC devices [SCSI] qla2xxx: Update version number to 8.01.07-k4. [SCSI] qla2xxx: Use generic isp_ops.fw_dump() function. [SCSI] qla2xxx: Perform a fw-dump when an ISP23xx RISC-paused state is detected. [SCSI] qla2xxx: Correct reset handling logic. ...
2007-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: hid-core.c: Adds GTCO CalComp Interwrite IPanel PIDs to blacklist HID: put usb_interface instead of usb_device into hid->dev to fix udevinfo breakage HID: add missing RX, RZ and RY enum values to hid-debug output HID: hid/hid-input.c doesn't need to include linux/usb/input.h HID: compilation fix when DEBUG_DATA is defined HID: proper LED-mapping for SpaceNavigator HID: update MAINTAINERS entry for USB-HID HID: GEYSER4_ISO needs quirk HID: fix some ARM builds due to HID brokenness - make USB_HID depend on INPUT
2007-01-22Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon/w83793: Hide invalid VID readings hwmon/w83793: Fix the fan input detection hwmon/w83793: Ignore disabled temperature channels hwmon: Fix the VRD 11 decoding hwmon/w83793: Remove the description of AMDSI and update the voltage formula
2007-01-22Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (5023): Fix compilation on ppc32 architecture V4L/DVB (5071): Tveeprom: autodetect LG TAPC G701D as tuner type 37 V4L/DVB (5069): Fix bttv and friends on 64bit machines with lots of memory V4L/DVB (5033): MSI TV@nywhere Plus fixes V4L/DVB (5029): Ks0127 status flags V4L/DVB (5024): Fix quickcam communicator driver for big endian architectures V4L/DVB (5021): Cx88xx: Fix lockup on suspend V4L/DVB (5020): Fix: disable interrupts while at KM_BOUNCE_READ V4L/DVB (5019): Fix the frame->grabstate update in read() entry point.
2007-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: Correct definition of R6 omap: Update MMC response types
2007-01-22Revert "[PATCH] Fix up mmap_kmem"Linus Torvalds
This reverts commit 99a10a60ba9bedcf5d70ef81414d3e03816afa3f. As per Hugh Dickins: "Nadia Derbey has reported that mmap of /dev/kmem no longer works with the kernel virtual address as offset, and Franck has confirmed that his patch came from a misunderstanding of what an offset means to /dev/kmem - whereas his patch description seems to say that he was correcting the offset on a few plaforms, there was no such problem to correct, and his patch was in fact changing its API on all platforms." Suggested-by: Hugh Dickins <hugh@veritas.com> Cc: Franck Bui-Huu <fbuihuu@gmail.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-21hid-core.c: Adds GTCO CalComp Interwrite IPanel PIDs to blacklistJeremy Roberson
Adds GTCO CalComp Interwrite IPanels to the hid-core.c blacklist. Signed-off-by: Jeremy A. Roberson <jroberson@gtcocalcomp.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: put usb_interface instead of usb_device into hid->dev to fix udevinfo ↵Anssi Hannula
breakage The commit 4916b3a57fc94664677d439b911b8aaf86c7ec23 introduced a hid regression between 2.6.19 and 2.6.20-rc1. The device put in input_dev->cdev is now of type usb_device instead of usb_interface. Before: > # readlink -f /sys/class/input/input6/event4/device > /sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1 After: > # readlink -f /sys/class/input/input3/event3/device > /sys/devices/pci0000:00/0000:00:10.0/usb1/1-1 This causes breakage: > # udevinfo -q all -n /dev/input/event3 > P: /class/input/input3/event3 > N: input/event3 > S: input/by-path/pci-1-1--event- > E: ID_SERIAL=noserial > E: ID_PATH=pci-1-1- No ID_MODEL, ID_VENDOR, ID_REVISION, ID_TYPE etc etc. Fix this by assigning the intf->dev into hid->dev, and fixing all the users. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: hid/hid-input.c doesn't need to include linux/usb/input.hJiri Kosina
There is no reason for generic hid-input.c to include usb-specific input.h. As a sideeffect, this also fixes warning of redefinition of dbg() macro, when hid-input.c is compiled with DEBUG (as there is a clash between dbg() from hid.h and usb/input.h). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: compilation fix when DEBUG_DATA is definedJiri Kosina
hid/hid-core.c references 'len' variable when DEBUG_DATA is defined, but the actual name of the variable is 'size'. Fix it. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: proper LED-mapping for SpaceNavigatorSimon Budig
This change introduces a mapping for LED indicators between the HID specification and the Linux input subsystem. The previous code properly mapped the LEDs relevant for Keyboards, but garbeled the remaining ones. With this change all LED enums from the input system get mapped to more or less equivalent LED numbers from the HID specification. This patch also ensures that the unused bits in a HID report to the device are zeroed out. This makes the 3Dconnexion SpaceNavigator fully usable with the linux input system. Signed-off-by: Simon Budig <simon@budig.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: GEYSER4_ISO needs quirkAdrian Friedli
I've got a newer MacBook with core2duo. Two keys on the keyboard are swapped, "unswaping" works with the same trick as GEYSER3_ISO. Signed-off-by: Adrian Friedli <masteradi@gmx.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: fix some ARM builds due to HID brokenness - make USB_HID depend on INPUTRussell King
We have USB_HID _newly_ selected in configurations which didn't have it before, which overrides CONFIG_HID and builds HID without input support. Nevertheless, here's a patch to solve more of the same that my original patch attempted to solve. The original patch is still required. Seems to solve the final instance of this problem here. Signed-off-by: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-19sata_mv HighPoint 2310 support (88SX7042)Olof Johansson
With the following patch, my HighPoint 2310 with a Marvell 88SX7042 on it seems to work OK. The controller only has 4 ports, with MV_FLAG_DUAL_HC it seems to init 8 ports and fails miserably at probe time. There are no other devices mapped to that chip, maybe it was just incorrectly specified in the first place? Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-19libata: fix handling of port actions in per-dev action maskTejun Heo
libata EH ignores port-wide actions in per-dev action mask. However, device resume requests EH_SOFTRESET using per-dev action mask. Under certain circumstances, this results in not resetting frozen port after resuming which causes failure of all commands. This patch allows port-wide actions to be requested in per-dev action mask. Before EH recovery starts, port-wide actions will be collected. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-19sata_via: add PCI ID 0x5337Luca Pedrielli
Add PCI ID 0x5337 to supported PCI ID. This is VT8237 in IDE mode. Signed-off-by: Luca Pedrielli <luca.pedrielli@barradev.it> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18sis190: failure to set the MAC address from EEPROMFrancois Romieu
Fix from http://bugzilla.kernel.org/show_bug.cgi?id=7747 Signed-off-by: Andrew Morton <akpm@osdl.org> Cc: <sleepy@mike-neko.net> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18hwmon/w83793: Hide invalid VID readingsGong Jun
Ignore the VID readings when the motherboard has not designed the function. Signed-off-by: Gong Jun <jgong@winbond.com> Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-01-18hwmon/w83793: Fix the fan input detectionRudolf Marek
Catch the cases when alternative pins are used to route the fan9-12 input. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Gong Jun <jgong@winbond.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-01-18hwmon/w83793: Ignore disabled temperature channelsGong Jun
Ignore the temperature readings when its channel is disabled, ignore AMDSI readings. Signed-off-by: Gong Jun <jgong@winbond.com> Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-01-18hwmon: Fix the VRD 11 decodingJean Delvare
I wonder how we came up with such a broken test in the first place. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-01-18hwmon/w83793: Remove the description of AMDSI and update the voltage formulaGong Jun
Fix the driver to match the information in datasheet 1.0. AMD SI interface is marked as reserved, computing formula for 5VDD and 5VSB is updated. Signed-off-by: Gong Jun <jgong@winbond.com> Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-01-18Fix phy_read/write redefinition errors in ucc_geth_phy.cTimur Tabi
The local versions of phy_read() and phy_write() in ucc_geth_phy.c conflict with the prototypes in include/linux/phy.h, so this patch renames them, moves them to the top of the file (while eliminating the redundant prototype), and makes them static. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18Update ucc_geth.c for new workqueue structureTimur Tabi
The workqueue interface changed with David Howell's patch on 11/22/2006 (SHA 65f27f38446e1976cc98fd3004b110fedcddd189). Several drivers were updated with that patch to handle the new interface, but ucc_geth.c was not one of them. This patch updates ucc_geth.c to support the new model. A compiler warning in set_mac_addr() was also fixed. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18myri10ge: update driver version to 1.2.0Brice Goglin
Driver is now at version 1.2.0. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18myri10ge: check that we can get an irqBrice Goglin
Now that IRQ allocation is done in myri10ge_open(), we want to still check when loading the driver that IRQ allocation could succeed later. Additionaly, we fix the initialization and printing of netdev->irq. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18myri10ge: make wc_fifo usage load-time tunableBrice Goglin
Under some circumstances, using WC without the WC fifo is faster. So we make it possible to tune wc_fifo with a module parameter. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-188139cp: Don't blindly enable interruptsChris Lalancette
Similar to this commit: http://kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d15e9c4d9a75702b30e00cdf95c71c88e3f3f51e It's not safe in cp_start_xmit to blindly call spin_lock_irq and then spin_unlock_irq, since it may very well be the case that cp_start_xmit was called with interrupts already disabled (I came across this bug in the context of netdump in RedHat kernels, but the same issue holds, for example, in netconsole). Therefore, replace all instances of spin_lock_irq and spin_unlock_irq with spin_lock_irqsave and spin_unlock_irqrestore, respectively, in cp_start_xmit(). I tested this against a fully-virtualized Xen guest using netdump, which happens to use the 8139cp driver to talk to the emulated hardware. I don't have a real piece of 8139cp hardware to test on, so someone else will have to do that. Signed-off-by: Chris Lalancette <clalance@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>