aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-11pata_ninja32: setup changesAlan Cox
Forcibly set more of the configuration at init time. This seems to fix at least one problem reported. We don't know what most of these bits do, but we do know what windows stuffs there. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11pata_legacy: typo fixAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11pata_amd: Note in the module description it handles NvidiaAlan Cox
This has confused a few people so fix it Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11sata_mv: fix loop with last portYinghai Lu
commit f351b2d638c3cb0b95adde3549b7bfaf3f991dfa sata_mv: Support SoC controllers cause panic: scsi 4:0:0:0: Direct-Access ATA HITACHI HDS7225S V44O PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde:<1>BUG: unable to handle kernel NULL pointer dereference at 000000000000001a IP: [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc PGD 0 Oops: 0000 [1] SMP CPU 3 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.24-smp-08636-g0afc2ed-dirty #26 RIP: 0010:[<ffffffff806262c7>] [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc RSP: 0000:ffff8102050bbec8 EFLAGS: 00010297 RAX: 0000000000000008 RBX: 0000000000000000 RCX: 0000000000000003 RDX: 0000000000008000 RSI: 0000000000000286 RDI: ffff8102035180e0 RBP: 0000000000000001 R08: 0000000000000003 R09: ffff8102036613e0 R10: 0000000000000002 R11: ffffffff8061474c R12: ffff8102035bf828 R13: 0000000000000008 R14: ffff81020348ece8 R15: ffffc20002cb2000 FS: 0000000000000000(0000) GS:ffff810405025700(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000000001a CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff810405094000, task ffff8102050b28c0) Stack: 000000010000000c 0002040000220400 0000001100000002 ffff81020348eda8 0000000000000001 ffff8102035f2cc0 0000000000000000 0000000000000000 0000000000000018 0000000000000000 0000000000000000 ffffffff80269ee8 Call Trace: <IRQ> [<ffffffff80269ee8>] ? handle_IRQ_event+0x25/0x53 [<ffffffff8026b393>] ? handle_fasteoi_irq+0x90/0xc8 [<ffffffff802218e2>] ? do_IRQ+0xf1/0x15f [<ffffffff8021df24>] ? default_idle+0x0/0x55 [<ffffffff8021f361>] ? ret_from_intr+0x0/0xa <EOI> [<ffffffff8023010c>] ? lapic_next_event+0x0/0xa [<ffffffff8021df55>] ? default_idle+0x31/0x55 [<ffffffff8021df50>] ? default_idle+0x2c/0x55 [<ffffffff8021df24>] ? default_idle+0x0/0x55 [<ffffffff8021e00b>] ? cpu_idle+0x92/0xb8 Code: 41 14 85 c0 89 44 24 14 0f 84 9d 02 00 00 f7 d0 01 d6 41 89 d5 89 41 14 8b 41 14 89 34 24 e9 7e 02 00 00 49 63 c5 49 8b 5c c6 48 <f6> 43 1a 80 4c 8b a3 20 37 00 00 0f 85 62 02 00 00 31 c9 41 83 RIP [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc RSP <ffff8102050bbec8> CR2: 000000000000001a ---[ end trace 2583b5f7a5350584 ]--- Kernel panic - not syncing: Aiee, killing interrupt handler! last_port already include port0 base. this patch change use last_port directly, and move pp assignment later. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11libata: ignore deverr on SETXFER if mode is configuredTejun Heo
Some controllers (VIA CX700) raise device error on SETXFER even after mode configuration succeeded. Update ata_dev_set_mode() such that device error is ignored if transfer mode is configured correctly. To implement this, device is revalidated even after device error on SETXFER. This fixes kernel bugzilla bug 8563. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11pata_via: fix SATA cable detection on cx700Tejun Heo
The first port of cx700 is SATA. Fix cable detection. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11net/phy/fixed.c: fix a use-after-freeAdrian Bunk
This patch fixes a use-after-free introduced by commit a79d8e93d300adb84cccc38ac396cfb118c238ad and spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11drivers/net/sis190: fix section mismatch warning in sis190_get_mac_addrSergio Luis
Fix following warnings: WARNING: drivers/net/sis190.o(.text+0x103): Section mismatch in reference from the function sis190_get_mac_addr() to the function .devinit.text:sis190_get_mac_addr_from_apc() WARNING: drivers/net/sis190.o(.text+0x10e): Section mismatch in reference from the function sis190_get_mac_addr() to the function .devinit.text:sis190_get_mac_addr_from_eeprom() Annotate sis190_get_mac_addr() with __devinit. Signed-off-by: Sergio Luis <sergio@uece.br> sis190.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11claw/lcs/netiucv: check s390dbf level before sprintsPeter Tiedemann
additional check of s390dbf level results in better performance if the default low debugging level is active. Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11lcs: avoid/reduce unused s390dbf debug areas.Peter Tiedemann
Since lcs makes use of 1 debug area only, the number of debug areas is reduced, while the number of pages per area is increased. Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11netiucv: change name of nop functionUrsula Braun
Dummy NOP actions for fsm-statemachines have to be defined separately for every using module of fsm-statemachines. Thus the generic name fsm_action_nop is replaced by module specific name netiucv_action_nop. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11netiucv: Remember to set driver->owner.Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11claw: removal of volatile variablesUrsula Braun
Volatile variables queme_switch and pk_delay are not used anyway. They are just a left over from an unused timer based packing logic. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11forcedeth: tx pause watermarksAyaz Abdulla
New chipsets introduced variant Rx FIFO sizes that need to be taken into account when setting up the tx pause watermarks. This patch introduces the new device feature flags based on a version and implements the new watermarks. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11forcedeth: tx collision fixAyaz Abdulla
This patch supports a new fix in hardware regarding tx collisions. In the cases where we are in autoneg mode and the link partner is in forced mode, we need to setup the tx deferral register differently in order to reduce collisions on the wire. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11cxgb3: Handle ARP completions that mark neighbors stale.Steve Wise
When ARP completes due to a request rather than a reply the neighbor is marked NUD_STALE instead of reachable (see arp_process()). The handler for the resulting netevent needs to check also for NUD_STALE. Failure to use the arp entry can cause RDMA connection failures. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Merge branch 'r6040' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-fixes
2008-02-11DM9000: Show the MAC address source after printing MACBen Dooks
Show whether the MAC address was read from the EEPROM or the onboard PAR registers. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Update retry count whilst identifying chipBen Dooks
Reading the ID register does not always return the correct ID from the device, so we retry several times to see if we get a correct value. These failures seem to be excaserbated by the speed of the access to the chip (possibly time between issuing the address and then the data cycle). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add support for MII ioctl() callsBen Dooks
Add entry to handle the MII ioctl() calls via the generic_mii_ioctl call. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add platform flag for no attached EEPROMBen Dooks
Allow the platform data to specify to the DM9000 driver that there is no posibility of an attached EEPROM on the device, so default all reads to 0xff and ignore any write operations. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove redudant use of "& 0xff"Ben Dooks
The writing of the data should implicitly truncate the data to 8bits, so do not bother with the ands in the code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove cal_CRC() and use ether_crc_le insteadBen Dooks
Remove the cal_CRC as this is basically wrappering the ether_crc_le function, and is only being used by the multicast hash table functions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Fix delays used by EEPROM read and writeBen Dooks
The code was using a delay of 8ms, when it should have been using the EEPROM status flag from the device to indicate the EEPROM transaction had finished. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Use netif_msg to enable debugging optionsBen Dooks
Use the netif_msg_*() macros to enable the debugging based on the board's msg_enable field. The output still goes via the dev_dbg() macros, so will be tagged and output as appropriate. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove unnecessary changelog in header commentBen Dooks
We have a perfectly good version control system, so we do not need to duplicate change comments in the header for this code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Ensure spinlock held whilst accessing EEPROM registersBen Dooks
Ensure we hold the spinlock whilst the registers and being modified even though we hold the overall lock. This should protect against an interrupt happening whilst we are using the device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove EEPROM initialisation code.Ben Dooks
Remove the old hack to program an initial EEPROM setting into the DM9000 as we now have ethtool support for reading and writing the EEPROM. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add ethtool control of msg_enable valueBen Dooks
Allow the msg_enable value to be read and written by the ethtool interface. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add ethtool support for reading and writing EEPROMBen Dooks
Add ethtool support to access the configuration EEPROM connected to the DM9000. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add mutex to protect accessBen Dooks
Add a mutex to serialise access to the chip functions from entries such as the ethtool and the MII code. This should reduce the amount of time the spinlock is held to protect the address register. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove barely used SROM array read.Ben Dooks
The srom array in the board data is only being used in the device probe routines. The probe also only uses the first 6 bytes of an array we spend 512ms reading 128 bytes from. Change to reading the MAC area directly to the MAC address structure. As a side product, we rename the read_srom_word to dm9000_read_eeprom to bring it into line with the rest of the driver. No change is made to the delay in this function, which will be dealt with in a later patch. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Use msleep() instead of udelay()Ben Dooks
We can use sleeping functions when reading and writing the PHY registers, so let us sleep instead of busy waiting for the PHY. Note, this also fixes a bug reading the PHY where only 100uS was being used instead of 150uS Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Do not sleep with spinlock and IRQs heldBen Dooks
The phy read and write routines call udelay() with the board lock held, and with the posibility of IRQs being disabled. Since these delays can be up to 500usec, and are only required as we have to save the chip's address register. To improve the behaviour, hold the lock whilst we are writing and then restore the state before the delay and then repeat the process once the delay has happened. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add initial ethtool supportBen Dooks
Add support for ethtool operations for the DM9000. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove old timer based poll routinesBen Dooks
Remove the timer based MII phy polling, as this is currently broken with the new EEPROM code that now uses mutexes to protect the phy access. This will need to be replaced in the future by some form of mutex safe mechanism for reading the MII phy status. The replacement has not been done here as changing this patch, which is early in the sequence has quite a knock-on effect. Once this series is merged, then a new presentation of an patch to poll the MII link status can be added. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Pass IRQ flags via platform resourcesBen Dooks
Use the flags in the IRQ resource to specify the type of IRQ being requested, so that systems which do not have level-based interrupts, or change the interrupt in some other way can specify this without making an #ifdef mess in the driver. This is specifically designed to undo the change in commit 4e4fc05a2b6e7bd2e0facd96e0c18dceb34d9349 which hardwires the type for everyone but blackfin to IRQT_RISING, which breaks all a number of Simtec boards which use (and setup in the bootloader) active low IRQs. Note, although there where originally objections due to the use of IORESOURCE_IRQ and IRQT_ flags not sharing the same definition, at least <include/linux/interrupt.h> notes these are the same. Signed-off-by: Ben Dooks <ben-linux@fluff.org> CC: Daniel Mack <daniel@caiaq.de> CC: Bryan Wu <bryan.wu@analog.com> CC: Alex Landau <landau.alex@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000 update debugging macros to use debug levelBen Dooks
Change the debug macros to use the compiler to elide any unnecessary debug level, and to allow device configurable debug control. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000 use dev_xxx() instead of printk for output.Ben Dooks
Move to using dev_dbg() and friends for the output of information to the user. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add platform data to specify external phyBen Dooks
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch adds a flag to the DM9000 platform data which, when set, configures the device to use an external PHY. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Ben Dooks <ben-linuy@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Fix endian-ness of data accesses.Ben Dooks
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch splits the receive status in 8bit wide fields and convert the packet length from little endian to CPU byte order. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Optimize cxgb3 xmit path (a bit)Krishna Kumar
1. Add common code for stopping queue. 2. No need to call netif_stop_queue followed by netif_wake_queue (and infact a netif_start_queue could have been used instead), instead call stop_queue if required, and remove code under USE_GTS macro. 3. There is no need to check for netif_queue_stopped, as the network core guarantees that for us (I am sure every driver could remove that check, eg e1000 - I have tested that path a few billion times with about a few hundred thousand qstops but the condition never hit even once). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11e1000: Fix for 32 bits platforms with 64 bits resourcesBenjamin Herrenschmidt
The e1000 driver stores the content of the PCI resources into unsigned long's before ioremapping. This breaks on 32 bits platforms that support 64 bits MMIO resources such as ppc 44x. This fixes it by removing those temporary variables and passing directly the result of pci_resource_start/len to ioremap. The side effect is that I removed the assignments to the netdev fields mem_start, mem_end and base_addr, which are totally useless for PCI devices. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> -- drivers/net/e1000/e1000_main.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Add wireless support for PS3Masakazu Mokuno
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Dan Williams <dcbw@redhat.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Add support for dual network interfaceMasakazu Mokuno
Add support for dual network (net_device) interface so that ethernet and wireless can own separate ethX interfaces. V2 - Fix the bug that bringing down and up the interface keeps rx disabled. - Make 'gelic_net_poll_controller()' extern , as David Woodhouse pointed out at the previous submission. - Fix weird usage of member names for the rx descriptor chain V1 - Export functions which are convenient for both interfaces - Move irq allocation/release code to driver probe/remove handlers because interfaces share interrupts. - Allocate skbs by using dev_alloc_skb() instead of netdev_alloc_skb() as the interfaces share the hardware rx queue. - Add gelic_port struct in order to abstract dual interface handling - Change handlers for hardware queues so that they can handle dual {source,destination} interfaces. - Use new NAPI functions This is a prerequisite for the new PS3 wireless support. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: add support for port link statusMasakazu Mokuno
Add support for interrupt driven port link status detection. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: remove duplicated ethtool handlersMasakazu Mokuno
Remove some ethtool handlers, which duplicate functionality that was already provided by the common ethtool handlers. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: code cleanupMasakazu Mokuno
Code cleanup: - Use appropriate prefixes for names instead of fixed 'gelic_net' so that objects of the functions, variables and constants can be estimated. - Remove definitions for IPSec offload to the gelic hardware. This functionality is never supported on PS3. - Group constants with enum. - Use bitwise constants for interrupt status, instead of bit numbers to eliminate shift operations. - Style fixes. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Add endianness macrosMasakazu Mokuno
Mark the members of the structure for DMA descriptors with proper endian annotations and use the appropriate accessor macros. As the gelic driver works only on PS3, all these macros will be expanded to null. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Fix the wrong dev_id passedMasakazu Mokuno
The device id for lv1_net_set_interrupt_status_indicator() is wrong. This path would be invoked only in the case of an initialization failure. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-02 06:18:59 +0000