aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-10-12V4L/DVB (8936): em28xx-cards: Add vendor/product id for ↵Douglas Schilling Landgraf
EM2820_BOARD_PROLINK_PLAYTV_USB2 Added vendor/product id for EM2820_BOARD_PROLINK_PLAYTV_USB2 Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8931): gspca: Vflip added for sonixj - ov7630.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8930): gspca: The image transfer by bulk is started by the subdrivers.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8929): gspca: sonixj webcam 0458:702e added.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8928): gspca: Version change to 2.3.0.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8927): gspca: PAC 207 webcam 093a:2476 added.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8924): cx18: Set mmio throttling delay default to 0 nsec.Andy Walls
cx18: Set mmio throttling delay default to 0 nsec. Not doing so makes analog tuner audio not work on some mahcines. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8921): ivtv: fix incorrect capability and assorted sliced vbi and ↵Hans Verkuil
video out fmt fixes - V4L2_CAP_VBI_OUTPUT is not supported by ivtv, remove it. - ivtv_try_fmt_vid_out also needed to constrain the width/height of MPEG decoder window sizes. - allow empty sliced services. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8920): cx18/ivtv: fix check of window boundaries for VIDIOC_S_FMTHans Verkuil
It was possible to set out-of-bounds windows sizes, this is now fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8918): saa6752hs: simplify writing to registersHans Verkuil
Add some utility functions to set registers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8917): saa7134-empress: fix changing the capture standard for ↵Hans Verkuil
non-tuner inputs When changing the standard the saa6752hs was not updated unless the input was the TV tuner. The saa6752hs should be updated regardless of the input. In addition the S_STD and G_STD ioctls for the mpeg video device didn't do anything. This is now fixed: they behave just like S_STD and G_STD on the video0 device. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8915): cx18: Increment u8 pointers not void pointers.Andy Walls
cx18: Increment u8 pointers not void pointers. Incrementing void pointers is dubious and the real intent in cx18_memcpy_fromio() and cx18_memset_io() is to increment by bytes, so use u8 pointers instead. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8914): cx18: Throttle mmio to/from the CX23418 so boards work in ↵Andy Walls
older systems cx18: Throttle mmio to/from the CX23418 so boards work in older systems. The CX23418 couldn't reliably handle mmio at the rate at which the cx18 driver was attempting to access the chip. The PCI bridge arrangements and settings on modern motherboards still allowed the CX23418 to work OK, but it didn't work well on many older motherboards: mysterious I2C errors, firmware loading errors, etc. This patch adds a throttle to *all* mmio access to the CX23418. It defaults to a delay of 31 ns, but is adjustable by the mmio_ndelay module parm. My HVR-1600 and Raptor PAL/SECAM card now function for analog capture on a motherboard with an Intel 82810E Northbridge and 82801AA Southbridge. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8913): cx18: Create cx18_ specific wrappers for all pci mmio ↵Andy Walls
accessesors. cx18: Create cx18_ specific wrappers for all pci mmio accessesors. This is a first step in instrumenting all CX23418 PCI bus IO, to debug problems with accessing the CX23418's PCI memory mapped IO. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8912): cx18: Correct CX23418 PCI configuration settings.Andy Walls
cx18: Correct CX23418 PCI configuration settings. The CX23418 doesn't have I/O space registers, so there was no need to try and turn them on (the card ignores the attempt to set the bit anyway). Also removed incorrect config space register setting that was errantly borrowed from ivtv. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8910): gspca: Add support of image transfer by bulk and minor change.Jean-Francois Moine
- image transfer by bulk - set the max number of transfer URS's to 4 (was 16) Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8906): v4l-dvb: fix assorted sparse warningsHans Verkuil
Fix sparse warnings. None are serious, but cutting down on these helps find future serious sparse warnings/errors. Redid the av7710.c patch based on a suggestion by Oliver Endriss. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8902): pvrusb2: Remove comment lines which refer to checkpatch's ↵Mike Isely
behavior Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8901): pvrusb2: Disable virtual IR device when not needed.Mike Isely
Disable "virtual" IR receiver on for 24xxx devices that have an internal IR blaster. In that case there's another another IR receiver present and to leave the virtual receiver available just causes confusion. This means that 24xxx users will no longer see a phantom IR chip. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8900): pvrusb2: Implement cropping pass throughMike Isely
This builds upon the previous pvrusb2 change to more formally implement full cropping support. This enables access from the driver's V4L interface, and enables access to full capabilities from sysfs as well. Note that this is only effective when in analog mode. It also will only work when the underlying digitizer's driver (saa7115 or cx25840 depending on the hardware) also implements the appropriate functions. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8899): pvrusb2: Implement default value retrieval in sysfs interfaceMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8898): pvrusb2: Be able to programmatically retrieve a control's ↵Mike Isely
default value The pvrusb2 control mechanism up until now has used a constant int to hold a control's default value. This change makes it possible to retrieve the control's default through some other means, e.g. as a result of a query from lower level software. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8897): pvrusb2: Mark crop window size change as being disruptive to ↵Mike Isely
the encoder Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8896): pvrusb2: Implement crop supportvdb128@picaros.org
Implement pvrusb2 driver plumbing to support cropping. Submitted by a pvrusb2 user. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8895): pvrusb2: Fail gracefully if an alien USB ID is usedMike Isely
The driver includes an internal table specifying additional information on a per device-type basis. This works great until somebody tries to run-time associate another USB ID with the driver. This change should hopefully allow the driver to fail gracefully under such a circumstance. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8894): pvrusb2: Remove BKLMike Isely
The earlier change from Hans Verkuil that pushed the BKL from video_open() down into the drivers should be unneeded for the pvrusb2 driver. This driver's implementation for open already protects its internal structures through other means, thus the BKL is not required. This change reverses Hans' previous change, for the pvrusb2 driver. It probably would have been a good idea for Hans to previously have asked for my ack before committing his change. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8893): pvrusb2: Add comment elaborating on direct use of swab32()Mike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8890): budget: Add callback to load firmware for the TDHD1 tunerOliver Endriss
Supply callback to load firmware for the TDHD1 tuner (using request_firmware). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8889): dvb-ttpci: Support full-ts hardware modificationOliver Endriss
Add support for the 'full-ts' hardware modification. On full-featured cards the data throughput is limited by the hardware design. The full-ts mod removes this bottleneck, i.e. the card is able to deliver the complete transport stream of a transponder. For details see http://www.escape-edv.de/endriss/dvb-full-ts-mod Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8888): budget: Support Activy DVB-T with TDHD1 tunerOliver Endriss
Support Fujitsu-Siemens Activy DVB-T card rev AL (ALPS TDHD1-204A tuner). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8559): replace __FUNCTION__ with __func__Alexander Beregalov
v4l: replace __FUNCTION__ with __func__ Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8879): bttv: Don't unmask VPRES interruptJean Delvare
When the input is set to tuner and no antenna is connected, the BT848 can flood VPRES interrupts. So we don't want to enable this type of interrupts when the input it set to tuner. As we don't do anything when receiving such an interrupt anyway, the easiest fix is to simply not unmask this specific interrupt. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8866): Add dummy FE to the Kconfig-file and fix itPatrick Boettcher
Reactivated dummy frontend driver which is extremely useful for debugging. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8857): v4l2-dev: replace panic with BUGHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8856): v4l: fix assorted compile warnings/errorsHans Verkuil
BIT define conflicts on kernels < 2.6.24, byteorder/swab.h doesn't need to be included at all. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8852): v4l2: use register_chrdev_region instead of register_chrdevHans Verkuil
Replace the old register_chrdev with the more flexible register_chrdev_region. Ensure that the release() is called when the very last chardev usage was released, and not when the sysfs devices were removed. This should simplify hotpluggable drivers considerably. Tested-by: Mike Isely <isely@isely.net> Tested-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: David Ellingsworth <david@identd.dyndns.org> Reviewed-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8850): bt856: fix define conflictHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8847): uvcvideo: Add support for a Bison Electronics webcam found ↵Laurent Pinchart
in the Fujitsu Amilo SI2636. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8846): uvcvideo: Supress spurious "EOF in empty payload" trace messageLaurent Pinchart
Pass the payload size instead of the header size to uvc_video_decode_end() to avoid generating an extra trace message for each frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8845): s2255drv: adds JPEG compression quality controlDean Anderson
adds VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP ioctls for controlling JPEG compression quality. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8838): CRED: Wrap task credential accesses in video input driversDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8807): Add DVB support for the Leadtek Winfast PxDVR3200 HSteven Toth
This patch is on behalf of Stephen Backway <stev391@email.com>, and represents two patches I received (and some subsequent whitespace cleanup I had due to how I pulled the patches). From the original author: a) Add DVB support for the Leadtek Winfast PxDVR3200 H. b) The tuner callback previously checked the command 3 times: 1) To see if it was the XC2028_RESET_CLK 2) To see if it was not the XC2028_RESET_TUNER 3) To see if it was the XC2028_RESET_TUNER This patch removes the third check. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Stephen Backway <stev391@email.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8800): [v4l-dvb-maintainer] [PATCH] v4l: mt9m111.c make function staticHarvey Harrison
drivers/media/video/mt9m111.c:758:5: warning: symbol 'mt9m111_restore_state' was not declared. Should it be static? New warning in next-20080825 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8797): A simple state machine was added to saa7134_ts.Dmitry Belimov
A simple state machine was added to saa7134_ts. It has three states: SAA7134_TS_STOPPED SAA7134_TS_BUFF_DONE SAA7134_TS_STARTED When buffer_setup is run we start the TS initialization: set SAA7134_TS_STOPPED. When all buffers are prepared we write data into DMA register and set SAA7134_TS_BUFF_DONE. When the first buffer is active start TS and set SAA7134_TS_STARTED. When ts_release is called stop TS and set SAA7134_TS_STOPPED. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8796): saa7134-empress: remove incorrect IRQ defines for TSDmitry Belimov
SAA7134_IRQ1_INTE_RA2_3 and SAA7134_IRQ1_INTE_RA2_2 are used for planar video, not for TS. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8795): saa7134-empress: insert leading null bytes for Beholder M6 ↵Dmitry Belimov
empress cards Additional code to improve the init sequence and add board type tests were done by Hans Verkuil. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8791): v4l2-dev: do not clear the driver_data fieldHans Verkuil
The driver_data field of the device structure was zeroed, thus losing this information. Many drivers set this up before calling video_device_register, so we have to ensure that it isn't lost. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8788): v4l: replace video_get_drvdata(video_devdata(filp)) with ↵Hans Verkuil
video_drvdata(filp) Use the new video_drvdata(filp) function where it is safe to do so. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8787): v4l2-dev: cleanups and add video_drvdata helper functionHans Verkuil
Cleanup v4l2-dev.[ch], add/improve comments and add a new helper function: video_drvdata() that can get the private driver data from a file struct. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8786): v4l2: remove the priv field, use dev_get_drvdata insteadHans Verkuil
Remove the priv field and let video_get/set_drvdata use dev_get_drvdata and dev_set_drvdata instead. Convert all drivers that still used priv directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 20:30:55 +0000