aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-26memstick: use fully asynchronous request processingAlex Dubov
Instead of using a separate thread to pump requests from block layer queue to memstick, do so inline, utilizing the callback design of the memstick. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26memstick: add "start" and "stop" methods to memstick deviceAlex Dubov
In some cases it may be desirable to ensure that associated driver is not going to access the media in some period of time. "start" and "stop" methods are provided therefore to allow it. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26memstick: allow "set_param" method to return an error codeAlex Dubov
Some controllers (Jmicron, for instance) can report temporal failure condition during power-on. It is desirable to account for this using a return value of "set_param" device method. The return value can also be handy to distinguish between supported and unsupported device parameters in run time. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26tpm: Use correct data types for sizes in tpm_write() and tpm_read()Michael Halcrow
Use the correct data types for the size parameters in tpm_write() and tpm_read(). Note that rw_verify_area() makes sure that this bug cannot be exploited to produce a buffer overrun. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26tpm: increase size of internal TPM response buffersMarcin Obara
This patch increases size of driver internal response buffers. Some TPM responses defined in TCG TPM Specification Version 1.2 Revision 103 have increased size and do not fit previously defined buffers. Some TPM responses do not have fixed size, so bigger response buffers have to be allocated. 200B buffers should be enough. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Marcin Obara <marcin_obara@users.sourceforge.net> Cc: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26tpm_bios.c: make 2 structs staticAdrian Bunk
This patch makes two needlessly global structs static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26tpm: add support for Broadcom TPM TIS device HIDLE DISEZ Erwan
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26parport_pc: add base_hi BAR for oxsemi_840Bernhard Walle
Use the 2nd BAR for the oxsemi_840 chip as BAR for base_hi. Tested with: Parallel controller [0701]: Oxford Semiconductor Ltd VScom 011H-EP1 1 port parallel adaptor [1415:8403] (prog-if 03 [IEEE1284]) This patch is needed to make 'TRISTATE' work with that adaptor. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26parport: remove superfluous local variableAndre Haupt
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26parport/share.c: proper externsAdrian Bunk
This patch adds proper externs for parport_default_timeslice and parport_default_spintime in include/linux/parport.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori
Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26pnp: fix the fcpnp_driver declaration to only exist if CONFIG_PNP=yDavid Howells
Fix the fcpnp_driver declaration to only exist if CONFIG_PNP=y as it's only accessed in that case. The PNP=n variant was added by 30d55e71a81b1f5a8136f191dc9f4c21f18e77e6 ("hisax: depend on CONFIG_PNP, not __ISAPNP__") Fixes an unused variable warning. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26pnp: have quirk_system_pci_resources() include io resourcesRene Herman
quirk_system_pci_resources() disables a PnP mem resource that overlaps a PCI BAR so as to not keep the PCI driver from claiming the resource. Have it do the same for io resources. Here, ACPI claims ports that overlap with my soundcard causing the soundcard driver to fail to load. It's unknown why my ACPI BIOS claims those ports; it did not use to but this is not a (kernel) regression. Some odd BIOS reconfig triggered by temporarily removing the card seems to have brought this on. Signed-off-by: Rene Herman <rene.herman@gmail.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26isa: set 24-bit dma_mask for ISA devicesRene Herman
dma_alloc_coherent() on x86 currently takes a passed in NULL device pointer to mean that it should allocate an ISA compatible (24-bit) buffer which is a bit of a hack. The ALSA ISA drivers are the main consumers of this but have a struct device in fact readily available. For the legacy drivers, this sets the device dma_mask in preparation for using the actual device with the DMA API so as to eventually not need the NULL hack in dma_alloc_coherent(). This does not fix a current bug -- 2.6.26-rc1 stumbled over the NULL hack in dma_alloc_coherent() but this has already been fixed in commit 4a367f3a9dbf2e7ffcee4702203479809236ee6e by Takashi Iwai. Signed-off-by: Rene Herman <rene.herman@gmail.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26pnp: set the pnp_card dma_mask for use by ISAPnP cardsRene Herman
dma_alloc_coherent() on x86 currently takes a passed in NULL device pointer to mean that it should allocate an ISA compatible (24-bit) buffer which is a bit of a hack. The ALSA ISA drivers are the main consumers of this but have a struct device in fact readily available. For the PnP drivers, the specific pnp_dev->dev device pointer is not always available at the right time so for now we want to pass the pnp_card->dev instead which is always available. Set its dma_mask in preparation for doing so. This does not fix a current bug -- 2.6.26-rc1 stumbled over the NULL hack in dma_alloc_coherent() but this has already been fixed in commit 4a367f3a9dbf2e7ffcee4702203479809236ee6e by Takashi Iwai. Signed-off-by: Rene Herman <rene.herman@gmail.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26asic3: platform_get_irq() may return signed unnoticedRoel Kluin
asic->irq_nr is unsigned. platform_get_irq() may return signed unnoticed Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Joe Perches <joe@perches.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26drivers/mmc/host/sdhci.h needs scatterlist.hAndrew Morton
alpha: drivers/mmc/host/sdhci.h:242: error: field 'sg_miter' has incomplete type Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25MFD_TC6393XB is ARM-onlyAdrian Bunk
Compile error on other architectures: CC drivers/mfd/tc6393xb.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c: In function ‘tc6393xb_attach_irq’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c:324: error: implicit declaration of function ‘set_irq_flags’ ... Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Merge git://git.infradead.org/embedded-2.6Linus Torvalds
* git://git.infradead.org/embedded-2.6: Make console charset translation optional
2008-07-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc: Wireup new syscalls Move update_mmu_cache() declaration from tlbflush.h to pgtable.h powerpc/pseries: Remove kmalloc call in handling writes to lparcfg powerpc/pseries: Update arch vector to indicate support for CMO ibmvfc: Add support for collaborative memory overcommit ibmvscsi: driver enablement for CMO ibmveth: enable driver for CMO ibmveth: Automatically enable larger rx buffer pools for larger mtu powerpc/pseries: Verify CMO memory entitlement updates with virtual I/O powerpc/pseries: vio bus support for CMO powerpc/pseries: iommu enablement for CMO powerpc/pseries: Add CMO paging statistics powerpc/pseries: Add collaborative memory manager powerpc/pseries: Utilities to set firmware page state powerpc/pseries: Enable CMO feature during platform setup powerpc/pseries: Split retrieval of processor entitlement data into a helper routine powerpc/pseries: Add memory entitlement capabilities to /proc/ppc64/lparcfg powerpc/pseries: Split processor entitlement retrieval and gathering to helper routines powerpc/pseries: Remove extraneous error reporting for hcall failures in lparcfg powerpc: Fix compile error with binutils 2.15 ... Fixed up conflict in arch/powerpc/platforms/52xx/Kconfig manually.
2008-07-25Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6: (22 commits) UBI: always start the background thread UBI: fix gcc warning UBI: remove pre-sqnum images support UBI: fix kernel-doc errors and warnings UBI: fix checkpatch.pl errors and warnings UBI: bugfix - do not torture PEB needlessly UBI: rework scrubbing messages UBI: implement multiple volumes rename UBI: fix and re-work debugging stuff UBI: amend commentaries UBI: fix error message UBI: improve mkvol request validation UBI: add ubi_sync() interface UBI: fix 64-bit calculations UBI: fix LEB locking UBI: fix memory leak on error path UBI: do not forget to free internal volumes UBI: fix memory leak UBI: avoid unnecessary division operations UBI: fix buffer padding ...
2008-07-25Fix ahci driver 'flags' typeLinus Torvalds
The new type checking of the flags arguments to irqsave and friends (commit 3f307891ce0e7b0438c432af1aacd656a092ff45) pointed out this thing with a big nice warning. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: mpc85xx fix pci ofdev 2nd passDave Jiang
Convert PCI err device from platform to open firmware of_dev to comply with powerpc schemes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: mv64x60 add pci fixupDave Jiang
Fixup of missing bit 0 on 64360 PCIx_ERR_MASK and errata FEr-#11 and FEr-#16 for the 64460. Bit 0 must remain 0. Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: mv64x60 fix get_propertyDave Jiang
Update get_property() call to use of_get_property() in order to fix compile Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: e752x fix too loud on nonmemory errorsDoug Thompson
This module harvests more than just memory errors, it also harvests various bus and dma errors that the Chipset detects. Previously, it would report all such errors, which would cause output to be TOO loud. This patches therefore adds a parameter which is used to turn off NON-MEMORY error reports by default. Or the reporting can be enabled via the parameter Also did code style cleanup: less than 80 characters per line rule Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix added newline to sysfs dimm labelsArthur Jones
The channel DIMM label does not seem to be used much in the edac code. However, where it is used (in the core code), it is assumed to not have a newline embedded. This leaves the sysfs file newline free which looks funny when cat'ing it. Here we just add the trailing newline to the sysfs chX_dimm_label output... [Doug Thompson note: the DIMM label is one of the primary uses of EDAC. User space daemon scripts, edac-utils@sourceforge, populate the DIMM label fields, via /sys/devices/system/edac attributes, with the silk screen labels of the motherboard in use. dmidecode access BIOS tables, but BIOS tables are well known to be incorrect and useless in these respects. edac-utils will strip off any newlines before its use of the output, when displaying DIMM slot silk screen labels. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix static to dynamic ksetArthur Jones
Static kobjects and ksets are not supported in Linux kernel. Convert the mc_kset from static to dynamic. This patch depends on my previous patch to remove the module parameter attributes from mc... Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix redundant sysfs controls to parametersArthur Jones
/sys/devices/system/edac/mc has a few files which are duplicated in /sys/module/edac_core/parameters. Now that all the functionality is duplicated between these two locations, we remove the former kobject attributes and update the documentation. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix workq timerArthur Jones
When updating the edac_mc_poll_msec module parameter from the sysfs /sys/module/edac_core/parameters/edac_mc_poll_msec file, we don't update the workq timers. So that, if we move from a big poll time to a small one, the small one won't take effect until the big one has timed out. Here we provide a new module parameter set method to call out to the update routine. This brings the /sys/module/edac_core/parameters functionality up to that provided by the /sys/drivers/system/edac/mc sysfs module parameter files so that we can remove them or at least link to the /sys/module files... Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: core fix to use dynamic kobjectArthur Jones
Static kobjects are not supported in linux kernel. Convert the edac_pci_top_main_kobj from static to dynamic. This avoids the double free of the edac_pci_top_main_kobj.name that we see on module reload of the e752x edac driver (and probably others as well). In addition Greg KH <greg@kroah.com> has pointed out that this code may be cleaned up significantly. I will look at that as a follow-on patch, for now, I just want the minimum fix to get this double-free oops bug squashed... Many thanks to Greg KH for his patience in showing me what the Documentation/kobject.txt already said (oops)... Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100: cleanupArthur Jones
Some code cleanliness issues found by Andrew Morton (thanks!) which should not affect functionality, but which should help make the code more maintainable. In particular, we now: * convert all #define's w/ a parameter to static inlines * use 1UL rather than 1ULL when calculating an unsigned long * use pci_disable_device The resulting code is tested and seems to work fine... Signed-off-by: Arthur Jones <ajones@riverbed.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 fix unmask ecc bitsArthur Jones
Explicitly unmask ECC errors we are interested in reporting. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 fix enable ecc hardwareArthur Jones
It is possible that the BIOS did not enable ECC at boot time. We check for that case and fail to load if it is true. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 fix missing bitsArthur Jones
The error mask we use to trigger ECC notifications is missing many bits of interest. We add these bits here so that all possible ECC errors can be reported. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 new intel chipset driverArthur Jones
Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25aoe: convert emsgs_sema into a completionMatthias Kaehlcke
ATA over Ethernet: The semaphore emsgs_sema is used for signalling an event, convert it in a completion. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Cc: "Ed L. Cashin" <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25unexport proc_clear_ttyAdrian Bunk
With the removal of the Solaris binary emulation the export of proc_clear_tty became unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25dell_rbu: use memory_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Abhay Salunke <Abhay_Salunke@dell.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25dcdbas: use memory_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Doug Warzecha <Douglas_Warzecha@dell.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25firmware: use memory_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Markus Rechberger <markus.rechberger@amd.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25drivers/misc/phantom: note PCIJiri Slaby
Tell users that the driver is only for PCI devices to stop asking for support of firewire and parallel devices. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Char: mxser, various cleanupsJiri Slaby
- remove unused macro - some whitespace cleanup - useless debug prints removal Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Char: mxser, remove predefined isa supportJiri Slaby
Remove a support of ISA addresses predefined at compile time. It is unused (filled by zeroes) and prolongs the code. Don't initialize global array and add `ioaddr' module param description. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Char: mxser, prints cleanupJiri Slaby
- use dev_* for printing in pci probe function - move ISA p[rints directly into isa find function, do not postpone it. Remove macros bound to it then. - prepend some prints by "mxser: " to know what it belongs to Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Char: mxser, globals cleanupJiri Slaby
- remove unused mxvar_diagflag - move mxser_msr into the only user/function - GMStatus, hmm, fix race-prone access to it. We need only one instance for real, not MXSER_PORTS. Move it to MOXA_GETMSTATUS ioctl. - mxser_mon_ext, almost the same, but alloc it on heap, since it has more than 2 kilos. - fix indexing, `i' is not the index value, `i * MXSER_PORTS_PER_BOARD + j' is Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Char: mxser, ioctl cleanupJiri Slaby
- remove break ctl from ioctl handler, it's never reached, since tty_ops->break_ctl is defined (mxser break handling is done in software) - mark MOXA_GET_MAJOR as deprecated - fix TIOCGICOUNT (some retval non-checks of put_user). Use copy_to_user to whole structure instead. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25nwflash: use simple_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25dsp56k: BKL pushdownAlan Cox
Push the BKL down into the driver ioctl methods Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ds1302: push down the BKL into the driver ioctl codeAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 11:27:40 +0000