aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-05-21mac80211: let drivers wake but not start queuesJohannes Berg
Having drivers start queues is just confusing, their ->start() callback can block and do whatever is necessary, so let mac80211 start queues and have drivers wake queues when necessary (to get packets flowing again right away.) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: trigger event log from debugfsEster Kummer
This patch adds a trigger for event log printing to debugfs. It removes the triger from sysfs. Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: refactor pci prob flowTomas Winkler
This patch refactores pci prob flow. It moves mac80211 registration to the end, otherwise there is a race between error path in pci_probe and mac_start. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: add debugfs to disable/enable run time calibrationTomas Winkler
This patch adds functionality to debugfs to enable or disable chain noise or sensitivity calibrations. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4965 remainings in iwl-eeprom.c fileTomas Winkler
The patch cleans up 4965 remaings from iwl-eeprom.c file. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: iwl5000 WiFi/WiMax coexistenceRon Rindjunsky
This patch adds WiFi/WiMax coexistence to iwl5000. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: add ucode init flow handling for iwl5000Ron Rindjunsky
This patch adds all the handlers and functions needed for ucode initialization flow. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: add ucode loaders for iwl5000Ron Rindjunsky
This patch adds ucode initialization handler and functions to load ucode for iwl5000 NIC. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: add rx_handlers stub for iwl5000Ron Rindjunsky
This patch adds rx_handler_setup stub to iwl5000. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: rename and move Tx queue activation/deactivationRon Rindjunsky
This patch moves iwl4965_txq_ctx_activate and iwl4965_txq_ctx_deactivate to iwl-dev.h and removes 4965 prefix from their names. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: clean up and bug fix for securityEmmanuel Grumbach
This patch cleans up code in security. 1) uses the new pointer to ieee80211_key_conf passed with the tx_control. 2) resolves bug reported by Mirco Tischler (sends ADD_STA in ASYNC mode) 3) resolves bug reported by Volker Braun regarding dynamic WEP 4) drops a WEP packet which has been garbaged by firmware. This can happen upon rekeying. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: don't switch to SGI if not supported by APEmmanuel Grumbach
This patch fixes SGI support. RS didn't look at the capabilities of the AP before switching to SGI, this should lead to a stall in the traffic with an AP that doesn't support SGI. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: move TX code into iwl-tx.cTomas Winkler
This patch moves the sending part of the TX code into iwl-tx.c including sending host commands. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: refactor ieee80211_get_qos_ctrlTomas Winkler
This patch refactors ieee80211_get_qos_ctrl function and its usage in iwlwifi drivers. Function is moved as inline into iwl-helpers.h. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4956 form iwl4965_tx_cmdTomas Winkler
This patch renames iwl4965_tx_cmd to iwl_tx_cmd and cleans collateral code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: move more station managment into iwl-sta.cTomas Winkler
This patch moves station management functions into iwl-sta.c (iwlcore). Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: move iwl_bcast_addr to iwlcoreTomas Winkler
This patch renames iwl4965_broadcast_addr to iwl_bcast_addr and moves it to iwlcore. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4965 from iwl4965_rate_infoTomas Winkler
This patch removes 4965 from iwl4965_rate_info structure and associated variables. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4965 prefix from iwl4965_frameTomas Winkler
This patch removes 4965 from iwl4965_frame struct and handling functions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4965 from iwl4965_tx_queue_update_write_ptrTomas Winkler
This patch renames iwl4965_tx_queue_update_write_ptr to iwl_txq_update_write_ptr. This is a preparation for moving to iwl-tx.c. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: get_hw_cmd_sizeGregory Greenman
This patch introduces a new handler get_hw_cmd_size in hcmd_utils, which should adjust the size of the command sent to the microcode according to the current nic. It also changes the RXON flow to make usage of this new handler. The patch also adds iwl_rxon_cmd structure which is supperset for 5000 HW and 4965. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: rename iwl4965_tx_info to iwl_tx_infoTomas Winkler
This patch renames iwl4965_tx_info to iwl_tx_info. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: rename iwl4965_queue to iwl_queueTomas Winkler
This patch renames iwl4965_queue to iwl_queue. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: filling Tx MCS setRon Rindjunsky
This patch fills the needed data about HW capabilities in matters of possible HT Tx MCS. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: separate Tx and Rx MCS when configuring HTRon Rindjunsky
This patch follows the 11n spec in separation between Tx and Rx MCS capabilities. Up until now, when configuring the HT possible set of Tx MCS only Rx MCS were considered, assuming they are the same as the Tx MCS. This patch fixed this by looking at low level driver Tx capabilities. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove iwl4965_nic_start functionRon Rindjunsky
This patch moves the contant of iwl4965_nic_start to the only place it is being used. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: changing irrelevant commentRon Rindjunsky
This patch changes an old eeprom comment in probe flow. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: reduce command retry timeHolger Schurig
[PATCH, take 2] libertas: reduce command retry time In the normal case, an unsuccessful command would be retried for 10*5 seconds, or 10*10 seconds in the worst case. This patch reduces this to 3*3 seconds, or 3*10 seconds in the worst case. I also reduced the time it takes to start a new command downloaded. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: sysfs interface for accessing default mesh channelJavier Cardona
This will create the following entry: /sys/class/net/mshX -- boot_options | |-- ... | `-- channel ... ... which I overlooked on my previous patch. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: Add reset_card() callback to hardware driverDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: sysfs interface for accessing non-volatile configurationJavier Cardona
This will create the following sysfs directories: /sys/class/net/mshX ... |-- boot_options | |-- bootflag | `-- boottime ... |-- mesh_ie | |-- capability | |-- mesh_id | |-- metric_id | `-- protocol_id Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: Extend MESH_CONFIG command to access non-volatile configurationJavier Cardona
This patch is based on a patch from Shailendra Govardhan and Brian Cavagnolo. It extends the MESH_CONFIG command to configure non-volatile parameters on libertas devices that support them (e.g. OLPC Active Antenna). This patch only implements the driver/firmware interface. See http://dev.laptop.org/ticket/6823 for minimal testing results and known issues. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: fix multicast filtering on eth and msh interfacesDavid Woodhouse
We weren't properly handling multicast on the mesh interface. Fix that, which involves setting up the hardware to use the union of dev->mc_list for both eth%d and msh%d devices. This means we can't do it directly from ->set_multicast_list() because we'd need to lock the other device to read its list, and we can't do that because it might deadlock. So punt the actual work to keventd. Also, invoke the same when taking an interface down; for some reason the core calls ->set_multicast_list while IFF_UP is still set in dev->flags when we're taking it down, so its addresses don't get removed then. We also convert MAC_MULTICAST_ADR to a direct command while we're at it, removing one more entry from the big switch statement in the deprecated lbs_prepare_and_send_command() function. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: Increase priority of 'unknown command' warningsDavid Woodhouse
Using the deprecated lbs_prepare_and_send_command() function for a command which it doesn't understand is an error; complain loudly about it even when we're not debugging. The mesh stats bug, where we converted MESH_ACCESS to a direct command but accidentally missed one user which was still trying to do it through lbs_prepare_and_send_command(), would have been caught a lot quicker if we'd done this sooner. Such bugs aren't entirely unlikely in future too, as we convert more code to stop using this function. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Release rt2x00 2.1.6Ivo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Remove extra +Ivo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Merge RX and TX entry private dataIvo van Doorn
With the pending removal of the tx_control structure we can merge the RX and TX entry private data structure in advance. This will temporarily increase the required memory for the queue, but that overhead will only be limited. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Remove redundant flags/dev_flags initializationsIvo van Doorn
the rxdesc structure is properly memsetted before passed to the driver. This means we don't have to reinitialize the flags and dev_flags fields in the drivers again. This will prevent problems when the rxdone handler is adding flags in a earlier status and will make the code look nicer when we are adding more read attributes in the rxdone handler in the driver. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Split rt2x00lib_write_tx_desc()Ivo van Doorn
Split rt2x00lib_write_tx_desc() up into a TX descriptor initializor and TX descriptor writer. This split is required to properly allow mac80211 to move its tx_control structure into the skb->cb array. The rt2x00queue_create_tx_descriptor() function will read all tx control information and convert it into a rt2x00 TX descriptor information structure. After that function is complete, we have all information we needed from the tx control structure and are free to start writing into the skb->cb array for our own purposes. rt2x00queue_write_tx_descriptor() will be in charge of really sending the TX descriptor to the hardware and kicking the TX queue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Only initialize the minimum needed fields of PCI TX descriptors.Gertjan van Wingerde
In preparation of replacing the statically allocated data DMA buffers with DMA-mapped skb's we need to change the TXD handling of the PCI drivers, by moving the programming of the buffer address fields to the actual TXD writing at TX time, instead of at start-up time. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Preserve descriptor information after memmove()Ivo van Doorn
Due to usage of memmove() in rt2x00usb the descriptor can become corrupted because it is being overwritten by the data part. Overall having the descriptor in front of the frame is a bad idea, we can however use the skb->cb array for this task, since that contains more then enough room to hold the entire descriptor and preserve the information long enough. After this we can also cleanup the alignment code a bit to make it work a bit more flexible to allow for all kinds of odd header lengths. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Fix queue related oops in case of deselected mac80211 multi-queue ↵Gertjan van Wingerde
feature. With the integration of the mac80211 multiqueue patches it has become possible that the mac80211 layer modifies the number of TX queues that is stored inside the ieee80211_hw structure, especially when multi-queue is not selected. The rt2x00 drivers are not well suited to handle that situation, as they allocate the queue structures before mac80211 has modified the number of queues it is going to use, and also expect the number of allocated queues to match the hardware implementation. Hence, ensure that rt2x00 maintains by itself the number of queues that the hardware supports, and, at the same time, making is not dependent on the preservation of contents inside a mac80211 structure. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Remove ieee80211_tx_control argument from write_tx_desc()Ivo van Doorn
Move the last remaining information details read from ieee80211_tx_control in the drivers to the txentry_desc structure. After this we can remove ieee80211_tx_control from the argument list for the callback function, which makes it easier when the control information is moved into skb->cb Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: Fix TX status reportingIvo van Doorn
The tx_status enumeration was broken since the introduction of rt61pci. That driver uses different values to report the status of the tx action. This would lead to frames that were reported as success but actually failed to be send out, or frames that were neither successfull or failure which were reported as failure. Fix this by change the TX status reporting and more explicitely check for failure or success. Note that a third possibility is added "unknown". Not all hardware (USB) can report the actual TX status, for rt61pci some frames will receive this status because the TXdone handler is never called for those frames. This unknown will now be handled as neither success or failure, so we no longer increment the failure counter while this conclusion could not be determined from the real status of the frame. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21rt2x00: trim skb_frame_desc to 32 bytesIvo van Doorn
Remove frame_type from skb_frame_desc and pass it as argument to rt2x00debug_dump_frame(). Change data_len and desc_len to unsigned short to save another 4 bytes in skb_frame_desc. Note that this was the only location where the data_len and desc_len was not yet treated as unsigned short. This trim is required to help mac80211 with adding the TX control and TX status informtation into the skb->cb structure. When that happens, drivers will have approximately 40 bytes left to use freely. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-16bnx2: Update version to 1.7.6.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-16bnx2: Pre-initialize struct cpu_reg.Benjamin Li
Instead of assigning values for the struct cpu_reg's at runtime, we already know these values at compile time. Therefore, we can use designated initializers, to initialize these structures and not have to incur this assignment cost at run-time. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-16bnx2: Rename RX_COPY_THRESH to BNX2_RX_COPY_THRESH.Benjamin Li
To make the bnx2 code more consistent, all instances of RX_COPY_THRESH have been changed to BNX2_RX_COPY_THRESH. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-16bnx2: Remove the rx_offset field from the bnx2 structure.Benjamin Li
The rx_offset field is set to a constant value and initialized only once. By replacing all references to the rx_offset field, we can eliminate rx_offset from the bnx2 structure. This will save 4 bytes for every bnx2 instance. [Added parentheses to the definition of BNX2_RX_OFFSET, as noted by Ben Hutchings.] Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-16bnx2: Add EEH PCI recovery.Wendy Xiong
Add PCI recovery functions to the driver. The initial pci state is also saved so the the MSI state can be restored during PCI recovery. Signed-off-by: Wendy Xiong <wendyx@us.ibm.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>