aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-08-06[PATCH] SCX200_ACB: eliminate spurious timeout errorsDavid Woodhouse
While busy-waiting for completion, check the hardware after scheduling; don't schedule and then immediately check the _timeout_. If the yield() took a long time (as it does on my OLPC prototype board when it's busy), we'd report a timeout even though the hardware was now ready. This fixes it, and also switches the yield() for a cond_resched() because we don't actually want to be _that_ nice about it. I see nice tightly-packed SMBus transactions now, rather than waiting for milliseconds between successive phases. Actually, we shouldn't be busy-waiting here at all. We should be using interrupts. That's an exercise for another day though. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Christer Weinigel <wingel@nano-system.com> Cc: <Jordan.Crouse@amd.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] pnpacpi: reject ACPI_PRODUCER resourcesmatthieu castet
A patch in -mm kernel correct the parsing of "address resources" of pnpacpi. Before we assumed it was memory only, but it could be also IO. But this change show an hidden bug : some resources could be producer type that are not handled by pnp layer. So we should ignore the producer resources. This patch fixes bug 6292 (http://bugzilla.kernel.org/show_bug.cgi?id=6292). Some devices like PNP0A03 have 0xd00-0xffff and 0x0-0xcf7 as IO producer resources. Before correcting "address resources" parsing, it was seen as memory and was harmless, because nobody tried to reserve this memory range as it should be IO. With the correction it become IO resources, and make failed all others device that want to register IO in this range and use pnp layer (like a ISA sound card). The solution is to ignore producer resources Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: "Brown, Len" <len.brown@intel.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] memory hotadd fixes: avoid registering res twiceKAMEZAWA Hiroyuki
both of acpi_memory_enable_device() and acpi_memory_add_device() may evaluate _CRS method. We should avoid evaluate device's resource twice if we could get it successfully in past. Signed-off-by: KAMEZWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Keith Mannthey <kmannth@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] memory hotadd fixes: avoid check in acpiKAMEZAWA Hiroyuki
add_memory() does all necessary check to avoid collision. then, acpi layer doesn't have to check region by itself. (*) pfn_valid() just returns page struct is valid or not. It returns 0 if a section has been already added even is ioresource is not added. ioresource collision check in mm/memory_hotplug.c can do more precise collistion check. added enabled bit check just for sanity check.. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Keith Mannthey <kmannth@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] ieee1394: sbp2: enable auto spin-up for Maxtor disksStefan Richter
At least Maxtor OneTouch III require a "start stop unit" command after auto spin-down before the next access can proceed. This patch activates the responsible code in scsi_mod for all Maxtor SBP-2 disks. https://bugzilla.novell.com/show_bug.cgi?id=183011 Maybe that should be done for all SBP-2 disks, but better be cautious. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] eicon: fix define conflict with ptraceAlexey Dobriyan
* MODE_MASK is unused in eicon driver. * Conflicts with a ptrace stuff on arm. drivers/isdn/hardware/eicon/divasync.h:259:1: warning: "MODE_MASK" redefined include2/asm/ptrace.h:48:1: warning: this is the location of the previous definition Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Karsten Keil <kkeil@suse.de> Acked-by: Armin Schindler <armin@melware.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] pSeries: hvsi char driver janitorial cleanupLinas Vepstas
A set of tty line discipline cleanup patches were introduced before the dawn of time, in kernel version 2.4.21. This patch performs that cleanup for the hvsi driver. The hvsi driver is used only on IBM pSeries PowerPC boxes. The driver was originally written by Hollis Blanchard, who has delegated maintainership to me. So this my first and maybe only patch in this official new role, because this driver is otherwise bug-free :-) Alan: "Actually its also a bug fix, tty->ldisc should be locked by refcounting and the helpers do this for you." Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] pSeries hvsi char driver null pointer derefLinas Vepstas
Under certain rare circumstances, it appears that there can be be a NULL-pointer deref when a user fiddles with terminal emeulation programs while outpu is being sent to the console. This patch checks for and avoids a NULL-pointer deref. Signed-off-by: Hollis Blanchard <hollisbl@austin.ibm.com> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Paul Fulghum <paulkf@microgate.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] au1100fb: Fix startup sequenceRodolfo Giometti
- fix up the start up sequence. This new sequence allow you to correctly enable the LCD controller even if the bootloader has already did it. - fix up a wrong indentation issue. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] au1100fb: info->var.rotate fixRodolfo Giometti
Fix "info->var.rotate" data settings. This info should be deduced directly from "fbdev->panel->control_base" defined into au1100fb.h. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] md: Fix a bug that recently crept into md/linearNeilBrown
A recent patch that allowed linear arrays to be reconfigured on-line allowed in a bug which results in divide by zero - not all mddev->array_size were converted to conf->array_size. This patch finished the conversion and fixed the bug. The offending patch was commit 7c7546ccf6463edbeee8d9aac6de7be1cd80d08a. Thanks to Simon Kirby <sim@netnation.com> for the bug report. Cc: Simon Kirby <sim@netnation.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] omap-rng build fixDavid Brownell
Seems like the omap-rng driver in the main tree predates the switch from <asm/hardware/clock.h> to <linux/clk.h> ... now it builds OK. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] crash in aty128_set_lcd_enable() on PowerBookOlaf Hering
Current Linus tree crashes in aty128_set_lcd_enable() because par->pdev is NULL. This happens since at least a week. Call trace is: aty128_set_lcd_enable aty128fb_set_par fbcon_init visual_init take_over_console fbcon_takeover notifier_call_chain blocking_notifier_call_chain register_framebuffer aty128fb_probe pci_device_probe bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver aty128fb_init init kernel_thread - info->fix was assigned twice. - par->vram_size is assigned in aty128_probe(), no need to redo it again in aty128_init() - register_framebuffer() uses uninitialized struct members, move it past par->pdev assignment and past aty128_bl_init(). Signed-off-by: Olaf Hering <olh@suse.de> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] drivers/edac/edac_mc.h must #include <linux/platform_device.h>Adrian Bunk
With CONFIG_PCI=n: CC drivers/edac/edac_mc.o drivers/edac/edac_mc.c: In function ‘add_mc_to_global_list’: drivers/edac/edac_mc.c:1362: error: implicit declaration of function ‘to_platform_device’ drivers/edac/edac_mc.c:1362: error: invalid type argument of ‘->’ drivers/edac/edac_mc.c: In function ‘edac_mc_add_mc’: drivers/edac/edac_mc.c:1467: error: invalid type argument of ‘->’ drivers/edac/edac_mc.c: In function ‘edac_mc_del_mc’: drivers/edac/edac_mc.c:1504: error: invalid type argument of ‘->’ Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-04Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Propagate acpi_processor_preregister_performance return value. [CPUFREQ] [2/2] demand load governor modules. [CPUFREQ] [1/2] add __find_governor helper and clean up some error handling. [CPUFREQ] Longhaul - Rename & fix multipliers table [CPUFREQ] Longhaul - Fix power state test to do something more useful [CPUFREQ] Longhaul - Readd accidentally dropped line [CPUFREQ] Make longhaul_walk_callback() static [CPUFREQ] X86_GX_SUSPMOD must depend on PCI [CPUFREQ] Longhaul - Initialise later. [CPUFREQ] Longhaul - Workaround issues with APIC. [CPUFREQ] Longhaul - Hook into ACPI C states. [CPUFREQ] return error when failing to set minfreq
2006-08-03Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] ahci: skip protocol test altogether in spurious interrupt code
2006-08-03Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] myri10ge - Fix spurious invokations of the watchdog reset handler [PATCH] myri10ge - Write the firmware in 256-bytes chunks [PATCH] Stop calling phy_stop_interrupts() twice [PATCH] s2io driver bug fixes #2 [PATCH] s2io driver bug fixes #1 [PATCH] zd1211rw: Packet filter fix for managed (STA) mode [PATCH] zd1211rw: Fixed endianess issue with length info tag detection [PATCH] zd1211rw: Remove bogus assert [PATCH] zd1211rw: Fix software encryption/decryption [PATCH] zd1211rw: Pass more management frame types up to host [PATCH] zd1211rw: Fixes radiotap header
2006-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: PNP: Add missing casts in printk() arguments PCI: docking station: remove dock uevents PCI: Unhide the SMBus on Asus PU-DLS PCI Hotplug: add acpiphp to MAINTAINERS PCI: pci/search: EXPORTs cannot be __devinit PCIE: cleanup on probe error pcie: fix warnings when CONFIG_PM=n
2006-08-03[PATCH] ahci: skip protocol test altogether in spurious interrupt codeUnicorn Chang
Skip protocol test altogether in spurious interrupt code. If PIOS is received when it shouldn't, ahci will raise protocol violation. Signed-off-by: Unicorn Chang <uchang@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] myri10ge - Fix spurious invokations of the watchdog reset handlerBrice Goglin
Fix spurious invocations of the watchdog reset handler. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] myri10ge - Write the firmware in 256-bytes chunksBrice Goglin
When writing the firmware to the NIC, the FIFO is 256-bytes long, so we use 256-bytes chunks and a read to wait until the previous write is done. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] Stop calling phy_stop_interrupts() twiceSergei Shtylylov
Prevent phylib from freeing PHY IRQ twice on closing an eth device: phy_disconnect() first calls phy_stop_interrupts(), then it calls phy_stop_machine() which in turn calls phy_stop_interrupts() making the kernel complain on each bootup... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] s2io driver bug fixes #2Ananda Raju
This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. code cleanup to handle gso modification better 2. Move repeated code in rx path, to a common function s2io_chk_rx_buffers() 3. Bug fix in MSI interrupt 4. clear statistics when card is down 5. Avoid linked list traversing in lro aggregation. 6. Use pci_dma_sync_single_for_cpu for buffer0 in case of 2/3 buffer mode. 7. ethtool tso get/set functions to set clear NETIF_F_TSO6 8. Stop LRO aggregation when we receive ECN notification Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] s2io driver bug fixes #1Ananda Raju
This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. Introduced macro "S2IO_PARM_INT" for declaring integer load parameter 2. UDP_RR test failure, memset txdl after Tx completion 3. PXE boot may leave adapter in unknown state so do reset in probe. 4. Add Tx completion code in netpoll 5. In s2io_vpd_read() move array vpd_data[] to pointer, saves stack memory 6. Fix bug in ethtool online test Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-08-03PNP: Add missing casts in printk() argumentsPierre Ossman
Some resource_size_t values are fed to printk() without handling the fact that they can have different size depending on your .config. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-03PCI: docking station: remove dock ueventsKristen Carlson Accardi
Remove uevent dock notifications. There are no consumers of these events at present, and uevents are likely not the correct way to send this type of event anyway. Until I get some kind of idea if anyone in userspace cares about dock events, I will just not send any. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-03PCI: Unhide the SMBus on Asus PU-DLSJean Delvare
Unhide the SMBus controller on the Asus PU-DLS board. This fixes bug #6763. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-03PCI Hotplug: add acpiphp to MAINTAINERSKristen Carlson Accardi
Add acpiphp to the MAINTAINERS file. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-03PCI: pci/search: EXPORTs cannot be __devinitRandy Dunlap
EXPORTed symbols cannot be __init/__devinit. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-03PCIE: cleanup on probe errorRandy Dunlap
If pcie_portdrv_probe() fails but it had already called pci_enable_device(), then call pci_disable_device() when returning error. Is there some reason that this isn't being done? or was it just missed? Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-03pcie: fix warnings when CONFIG_PM=nHenrik Kretzschmar
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-03Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix show_mem for VIRTUAL_MEM_MAP+FLATMEM [IA64] align high endpoint of VIRTUAL_MEM_MAP [PATCH] Fix RAID5 + IA64 compile [IA64] Don't alloc empty frame in ia64_switch_mode_phys [IA64] Do not assume output registers be reservered. [IA64] add platform check to snsc driver init [IA64] sparse cleanups [IA64] Fix breakage in simscsi.c [IA64] Format /proc/pal/*/version_info correctly
2006-08-03IB/uverbs: Avoid a crash on device hot removeJack Morgenstein
Wait until all users have closed their device context before allowing device unregistration to complete. This prevents a crash caused by referring to stale data structures. A better solution would be to have a way to revoke contexts rather than waiting for userspace to close the context, but that's a much bigger change that will have to wait. For now let's at least avoid the crash. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/ipoib: Remove broken link from Kconfig and documentationOr Gerlitz
Remove references to the IPoIB IETF working group as it has been closed. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/srp: Work around data corruption bug on Mellanox targetsIshai Rabinovitz
Data corruption has been seen with Mellanox SRP targets when FMRs create a memory region with I/O virtual address != 0. Add a workaround that disables FMR merging for Mellanox targets (OUI 0002c9). Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/srp: Fix crash in srp_reconnect_targetIshai Rabinovitz
Protect against srp_reset_device() clearing the req_queue while srp_reconnect_target() is in progress (note that state change at the top of srp_reconnect_target() is not sufficient for this since srp_reset_device() ignores the state). Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/cm: Fix error handling in ib_send_cm_reqSean Hefty
Report error code rather than success (0) on failure allocating timewait_info in ib_send_cm_req(). Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/mthca: Clean up mthca array index maskRoland Dreier
Define a constant MTHCA_ARRAY_MASK to replace repeated uses of (PAGE_SIZE / sizeof (void *) - 1) in mthca array code. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/mthca: Fix mthca_array_clear() thinkoMichael S. Tsirkin
mthca_array_clear() does not clear the slot if the used count is positive. This leads to crashes in mthca_qp_event() since that uses mthca_array_get() to check that the qp is valid. Discovered by Ali Ayoub. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-02Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) [NET]: Fix more per-cpu typos [SECURITY]: Fix build with CONFIG_SECURITY disabled. [I/OAT]: Remove CPU hotplug lock from net_dma_rebalance [DECNET]: Fix for routing bug [AF_UNIX]: Kernel memory leak fix for af_unix datagram getpeersec patch [NET]: skb_queue_lock_key() is no longer used. [NET]: Remove lockdep_set_class() call from skb_queue_head_init(). [IPV6]: SNMPv2 "ipv6IfStatsOutFragCreates" counter error [IPV6]: SNMPv2 "ipv6IfStatsInHdrErrors" counter error [NET]: Kill the WARN_ON() calls for checksum fixups. [NETFILTER]: xt_hashlimit/xt_string: missing string validation [NETFILTER]: SIP helper: expect RTP streams in both directions [E1000]: Convert to netdev_alloc_skb [TG3]: Convert to netdev_alloc_skb [NET]: Add netdev_alloc_skb(). [TCP]: Process linger2 timeout consistently. [SECURITY] secmark: nul-terminate secdata [NET] infiniband: Cleanup ib_addr module to use the netevents [NET]: Core net changes to generate netevents [NET]: Network Event Notifier Mechanism. ...
2006-08-02Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (24 commits) Revert "[PATCH] USB: move usb_device_class class devices to be real devices" Revert "[PATCH] USB: convert usb class devices to real devices" USB: UHCI: Don't test the Short Packet Detect bit USB: unusual_devs entry for Nokia 3250 USB: dummy-hcd: disable interrupts during req->complete USB: fix the USB_GADGET_DUMMY_HCD dependencies USB: ati_remote.c: autorepeat fix USB: doc: fixes devio.c location in proc_usb_info.txt. USB: doc: usb-help.txt update. USB: Patch for rtl8150 to fix unplug problems USB: cypress driver comment updates USB: unusual_devs device removal usb-storage: Add US_FL_IGNORE_DEVICE flag; ignore ZyXEL G220F USB: New USB ID for Belkin Serial Adapter USB: Additional PID for the ftdi_sio driver USB: adding support for SHARP WS003SH to ipaq.c USB: Fix Freescale high-speed USB host dependency USB: Removed 3-port device handler from Option driver USB: Drop Sierra Wireless MC8755 from the Option driver USB: Let option driver handle Anydata CDMA modems. Remove anydata driver. ...
2006-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-2.6.18Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-2.6.18: gitignore: gitignore quilt's files kbuild: always use $(CC) for $(call cc-version) kconfig: correct oldconfig for unset choice options kbuild: -fno-stack-protector is not good kbuild: fix typo in modpost kbuild: improve error from file2alias kbuild: .gitignore utsrelease.h kbuild: version.h and new headers_* targets does not require a kernel config kbuild: hardcode value of YACC&LEX for aic7-triple-x
2006-08-02Revert "[PATCH] USB: move usb_device_class class devices to be real devices"Greg Kroah-Hartman
This reverts c182274ffe1277f4e7c564719a696a37cacf74ea commit because it required a newer version of udev to work properly than what is currently documented in Documentation/Changes. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02Revert "[PATCH] USB: convert usb class devices to real devices"Greg Kroah-Hartman
This reverts bd00949647ddcea47ce4ea8bb2cfcfc98ebf9f2a commit because it required a newer version of udev to work properly than what is currently documented in Documentation/Changes. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: UHCI: Don't test the Short Packet Detect bitAlan Stern
Apparently some UHCI controllers change the value of the Short Packet Detect (SPD) bit in the TD status word -- presumably when they receive a short packet. This patch (as759) changes uhci-hcd to avoid assuming that the bit is unchanged; in fact, the driver no longer looks at SPD at all. This fixes the second problem reported in Bugzilla #6752. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: unusual_devs entry for Nokia 3250Alan Stern
Here is another unusual_devs entry (as760) for another Nokia device, this time the 3250. From: Mario Rettig <mariorettig@web.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: dummy-hcd: disable interrupts during req->completeAlan Stern
This patch (as756) fixes a bug in dummy-hcd found by the lockdep checker. In one of the code paths, the driver did not disable interrupts before calling a request completion routine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: fix the USB_GADGET_DUMMY_HCD dependenciesAdrian Bunk
If USB=m, USB_GADGET=y, the option USB_GADGET_DUMMY_HCD mustn't be offered since selecting it results in a compile error. This patch fixes kernel Bugzilla #6534 reported by Toralf Förster. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: ati_remote.c: autorepeat fixMarko Macek
When HZ is set to 250 (new default) or 100, the time span during which repeated events from the device are ignored could be too small due to ms->jiffies rounding. This causes the auto repeat to kick in early making it impossible for the user to generate individual press/release events. Increate the timeout to compensate. Signed-off-by: Marko Macek <Marko.Macek@gmx.net> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:32:49 +0000