aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-12-03sata_fsl: Add asynchronous notification supportashish kalra
Enable device hot-plug support on Port multiplier fan-out ports Signed-off-by: Ashish Kalra <Ashish.Kalra@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03pata_hpt{37x,3x2n}: add debounce delay to cable detection methodsBartlomiej Zolnierkiewicz
Alan Cox reported that cable detection sometimes works unreliably for HPT3xxN and that the issue is fixed by adding debounce delay as used by the vendor driver. Sergei Shtylyov also noticed that debounce delay is needed for all HPT37x and HPT3xxN chipsets according to vendor drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03pata_hpt3x2n: fix cable detectionBartlomiej Zolnierkiewicz
The detection was reversed between primary and secondary ports. Fix it to match hpt366 and the vendor driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03ata: Don't require newlines for link_power_management_policyMatthew Garrett
sysfs attributes shouldn't require newlines. Make it possible to set the link power management policy without a trailing newline. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03pata-it821x: use PCI_DEVICE_ID_RDC_D1010 defineOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03pata_hpt37x: unify ->pre_reset methodsBartlomiej Zolnierkiewicz
We can use the same ->pre_reset method for all HPT37x chipsets now. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03pata_hpt37x: add proper cable detection methodsBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03ahci: disable SNotification capability for ich8Shaohua Li
I obseved there is a sata_async_notification() for every ahci interrupt. But the async notification does nothing (this is hard disk drive and no pmp). This cause cpu wastes some time on sntf register access. It appears ICH AHCI doesn't support SNotification register, but the controller reports it does. After quirking it, the async notification disappears. PS. it appears all ICH don't support SNotification register from ICH manual, don't know if we need quirk all ICH. I don't have machines with all kinds of ICH. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03sata_sil24: MSI support, disabled by defaultVivek Mahajan
The following patch adds MSI support. Some platforms may have broken MSI, so those are defaulted to use legacy PCI interrupts. Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03libata: remove experimental tag on PATA driversRobert Hancock
Remove the experimental tag on Parallel ATA drivers. Though some of the individual PATA drivers are still marked as experimental, as a group they can hardly be considered to be, given they've been used in various distros for some time. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03sata_mv: Clean up hard coded array size calculation.Thiago Farina
Use ARRAY_SIZE macro of kernel api instead. Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03pata_via: fix double put on isa bridgeJiri Slaby
In via_init_one, when via_isa_bridges iterator reaches PCI_DEVICE_ID_VIA_ANON and last but one via_isa_bridges bridge is found but rev doesn't match, pci_dev_put(isa) is called twice. Do pci_dev_put only once. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03pata_cs5536: use 32-bit BM DMA template instead of 16-bit.Krzysztof Halasa
Tested on IXP425 + CS5536. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03libata-acpi: missing _SDD is not an errorTejun Heo
Missing _SDD is not an error. Don't treat it as one. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-12-03Merge branch 'master' into nextJames Morris
2009-12-02sunhme: fix dma warning in Sun HMEMikulas Patocka
Fix dma-api-checking warnings in Sun HME Sun HME driver is mapping the first fragment with dma_map_single and subsequent fragments with dma_map_page. It is unmapping all fragments with dma_unmap_single and that produces the warning. This patch changes it so that it unmaps only the first fragment with dma_unmap_single and subsequent fragments are unmapped with dma_unmap_page. WARNING: at lib/dma-debug.c:816 check_unmap+0x3ac/0x780() hme 0000:01:01.1: DMA-API: device driver frees DMA memory with wrong function [device address=0x00000000c1082000] [size=32 bytes] [mapped as page] [unmapped as single] Modules linked in: nbd sunhme openpromfs sermouse unix Call Trace: [0000000000456910] warn_slowpath_common+0x50/0xa0 [0000000000571f4c] check_unmap+0x3ac/0x780 [0000000000572570] debug_dma_unmap_page+0x50/0x60 [000000001002f5fc] happy_meal_tx+0x11c/0x260 [sunhme] [000000001002fc4c] happy_meal_interrupt+0xcc/0xe0 [sunhme] [0000000000492d94] handle_fasteoi_irq+0x74/0x100 [000000000042ac0c] handler_irq+0xcc/0x100 [0000000000426a54] valid_addr_bitmap_patch+0x14/0x1c0 [0000000000665de0] _spin_unlock_irqrestore+0x40/0x60 [0000000000462bb8] mod_timer+0x118/0x1a0 [00000000005ec254] sk_reset_timer+0x14/0x40 [0000000000635e4c] tcp_event_new_data_sent+0x8c/0xc0 [0000000000639374] __tcp_push_pending_frames+0x34/0xc0 ---[ end trace 73d5c42c1e9f11c4 ]--- Mapped at: [<000000001002f148>] happy_meal_start_xmit+0x308/0x480 [sunhme] [<00000000005fc858>] dev_hard_start_xmit+0x318/0x3c0 [<000000000060fec4>] sch_direct_xmit+0x1a4/0x200 [<00000000005fced0>] dev_queue_xmit+0x410/0x560 [<0000000000604a1c>] neigh_resolve_output+0xfc/0x300 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02atl1e: Remove non-implementation of ethtool set_msglevel() operationBen Hutchings
Unimplemented operations should not silently fail. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02atl1e: Remove redundant definitions of ethtool operationsBen Hutchings
These functions provide the default behaviour and do not need to be set in struct ethtool_ops. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02atl1e: Allow TX checksum offload and TSO to be disabled and reenabledBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-12-02cnic: Use dma_alloc_coherent().Michael Chan
Replace pci_alloc_consistent() with dma_alloc_coherent() so that appropriate GFP flags can be used. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02cnic: Fix rq_page_table DMA address.Michael Chan
The old code mistakenly zeroed out the upper 32-bit of the DMA address. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02cnic: Fix bogus iSCSI MAC addressMichael Chan
Fix code to read the proper iSCSI MAC address for bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02cnic: Fix bnx2x ring shutdown.Michael Chan
Need to send a HALT command to the firmware to fully shutdown the bnx2x rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02cnic: Fix ring I/O address for bnx2x devices.Michael Chan
Old code was initializing the ring producers using an incorrect I/O address. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02netxen: fix failure cases for fw hang recoveryAmit Kumar Salecha
Handle few corner cases in firmware hang detection and recovery: o Don't mark device state as READY, till handshake with firmware is done. o During probe, if start_firmware fails, restore reference count. o Don't increment refernce count, if start_firmware fails during firmware reset. o Clear __NX_RESETTING bit, incase of fatal error or tempeature reaches critical limit so that pci remove() doesn't poll on this bit. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02netxen : fix debug tools access for NX2031Narender Kumar
Driver maps only some part of the MMIO bar 0 in case of NX2031. This is sufficient for tx and rx by the driver. When debug tools need to access resources in unmapped regions, driver needs to map these on the fly in order to complete read/write request. Signed-off-by: Narender Kumar <narender.kumar@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay.phadke@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02e1000e: correct ICH/PCH PHY operations function pointersBruce Allan
Some function pointers for a few PHY operations (for 82578 and 82567) and were set incorrectly causing functions to be executed that were accessing incorrect PHY register offsets for that particular device. This patch also moves a few PHY-specific functions from ich8lan.c to the more appropriate phy.c. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02e1000e: refactor PHY ID detection workaroundBruce Allan
The workaround that detects the correct PHY ID when an initial read of the PHY ID registers returns an invalid one should retry up to ten times with a small delay between attempts using a single PHY address and then repeat using the remaining possible PHY addresses. Do this instead of trying each possible PHY address repeating that up to 100 times. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02e1000e: check_polarity function pointers not set for 8257xBruce Allan
The function pointers for 8257x devices are not set. This is not really a problem now because there is nothing in the driver that references the pointers for this particular MAC-family (the appropriate functions are called directly), but the pointers should be set in case they are used in the future. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02tg3: remove use of skb_dma_map/unmapAlexander Duyck
Due to the fact that skb_dma_map/unmap do not work correctly when a HW IOMMU is enabled it has been recommended to go about removing the calls from the network device drivers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: remove use of skb_dma_map/unmapAlexander Duyck
Due to the fact that skb_dma_map/unmap do not work correctly when a HW IOMMU is enabled it has been recommended to go about removing the calls from the network device drivers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02bnx2: remove skb_dma_map/unmap calls from driverAlexander Duyck
Due to the fact that skb_dma_map/unmap do not work correctly when a HW IOMMU is enabled it has been recommended to go about removing the calls from the network device drivers. [ Fix bnx2_free_tx_skbs() ring indexing and use NETDEV_TX_OK return code in bnx2_start_xmit() after cleaning up DMA mapping errors. -Mchan ] Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02igbvf: remove skb_dma_map/unmap call from driversAlexander Duyck
This patch removes the skb_dma_map/unmap calls from the igbvf driver due to the fact that it does not play well with HW IOMMU when combined with transmitting cloned skbs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02igb: remove use of skb_dma_map from driverAlexander Duyck
This change removes skb_dma_map/unmap calls from the igb driver due to the fact that the call is incompatible with iommu enabled kernels. In order to prevent warnings about using the wrong unmap call I have added a mapped_as_page value to the buffer_info structure to track if the mapped region is a page or a buffer. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02ixgbe: remove skb_dma_map/unmap calls from driverAlexander Duyck
This patch removes skb_dma_map/unmap calls from the ixgbe driver due to the fact that the calls don't work with HW IOMMU enabled systems. The problem is that multiple mappings will give different results when HW IOMMU is enabled and the skb_dma_map/unmap calls only have one location to store mappings. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02ixgb: remove use of skb_dma_map from ixgbAlexander Duyck
skb_dma_map is incompatible with HW iommu due to the fact that multiple mappings can result in different results each time. For this reason it is best to just remove use of these function calls. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02e1000: remove use of skb_dma_map from e1000 driverAlexander Duyck
Remove the use of skb_dma_map from the e1000 driver in order to avoid issues when HW iommu are in use. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02e1000e: remove use of skb_dma_map from e1000e driverAlexander Duyck
In testing we have found that skb_dma_map/unmap is incompatible with HW IOMMU due to the fact that multiple mappings will return different results. In order to correct this we need to remove skb_dma_map/unmap calls from the e1000e driver. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02VIDEO: Correct use of request_region/request_mem_regionJulia Lawall
request_region should be used with release_region, not request_mem_region. Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c, the problem is actually the other way around; request_mem_region should be used instead of request_region. The semantic patch that finds/fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ expression start; @@ request_region(start,...) @b1@ expression r1.start; @@ request_mem_region(start,...) @depends on !b1@ expression r1.start; expression E; @@ - release_mem_region + release_region (start,E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-02SPI: spi_txx9: Fix bit rate calculationAtsushi Nemoto
TXx9 SPI bit rate is calculated by: fBR = (spi-baseclk) / (n + 1) Fix calculation of min_speed_hz, max_speed_hz and n. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Correct WM831X_MAX_ISEL_VALUE
2009-12-02Input: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset listAnisse Astier
These laptops often leave i8042 in a wierd state resulting in non- operational touchpad and keyboard. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-02Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: revert incorrect fix for read error handling in raid1.
2009-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [PATCH] rc32434_wdt: fix compilation failure [WATCHDOG] rc32434_wdt.c: use resource_size()
2009-12-02bnx2: EEH is failing with timeoutBreno Leitao
bnx2 is failing when a PCI error is detected. The error is the following: bnx2: Chip not in correct endian mode bnx2: fw sync timeout, reset code = 404001d This error was caused because the way pci_restore_state() is working after commit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff ("PCI: Clear saved_state after the state has been restored"). Signed-off-by: Breno Leitao<leitao@linux.vnet.ibm.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Initialise wm831x structure pointor for ISINK driver
2009-12-02regulator: Initialise wm831x structure pointor for ISINK driverMark Brown
The version that made it into mainline missed the initialisation of the chip handle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-12-02Merge branch 'fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 * 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6: [ARM] pxamci: call mmc_remove_host() before freeing resources
2009-12-02[ARM] pxamci: call mmc_remove_host() before freeing resourcesDaniel Mack
mmc_remove_host() will cause the mmc core to switch off the bus power by eventually calling pxamci_set_ios(). This function uses the regulator or the GPIO which have been freed already. This causes the following Oops on module unload. [ 49.519649] Unable to handle kernel paging request at virtual address 30303a70 [ 49.526878] pgd = c7084000 [ 49.529563] [30303a70] *pgd=00000000 [ 49.533136] Internal error: Oops: 5 [#1] [ 49.537025] last sysfs file: /sys/devices/platform/pxa27x-ohci/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_level [ 49.547471] Modules linked in: pxamci(-) eeti_ts [ 49.552061] CPU: 0 Not tainted (2.6.32-rc8 #322) [ 49.557001] PC is at regulator_is_enabled+0x3c/0xbc [ 49.561846] LR is at regulator_is_enabled+0x30/0xbc [ 49.566691] pc : [<c01a2448>] lr : [<c01a243c>] psr: 60000013 [ 49.566702] sp : c7083e70 ip : 30303a30 fp : 00000000 [ 49.578093] r10: c705e200 r9 : c7082000 r8 : c705e2e0 [ 49.583280] r7 : c7061340 r6 : c7061340 r5 : c7083e70 r4 : 00000000 [ 49.589759] r3 : c04dc434 r2 : c04dc434 r1 : c03eecea r0 : 00000047 [ 49.596241] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 49.603329] Control: 0000397f Table: a7084018 DAC: 00000015 [ 49.609031] Process rmmod (pid: 1101, stack limit = 0xc7082278) [ 49.614908] Stack: (0xc7083e70 to 0xc7084000) [ 49.619238] 3e60: c7082000 c703c4f8 c705ea00 c04f4074 [ 49.627366] 3e80: 00000000 c705e3a0 ffffffff c0247ddc c70361a0 00000000 c705e3a0 ffffffff [ 49.635499] 3ea0: c705e200 bf006400 c78c4f00 c705e200 c705e3a0 ffffffff c705e200 ffffffff [ 49.643633] 3ec0: c04d8ac8 c02476d0 ffffffff c0247c60 c705e200 c0248678 c705e200 c0249064 [ 49.651765] 3ee0: ffffffff bf006204 c04d8ad0 c04d8ad0 c04d8ac8 bf007490 00000880 c00440c4 [ 49.659898] 3f00: 0000b748 c01c5708 bf007490 c01c44c8 c04d8ac8 c04d8afc bf007490 c01c4570 [ 49.668031] 3f20: bf007490 bf00750c c04f4258 c01c37a4 00000000 bf00750c c7083f44 c007b014 [ 49.676162] 3f40: 4000d000 6d617870 08006963 00000001 00000000 c7085000 00000001 00000000 [ 49.684287] 3f60: 4000d000 c7083f8c 00000001 bea01a54 00005401 c7ab1400 c00440c4 00082000 [ 49.692420] 3f80: bf00750c 00000880 c7083f8c 00000000 4000cfa8 00000000 00000880 bea01cc8 [ 49.700552] 3fa0: 00000081 c0043f40 00000000 00000880 bea01cc8 00000880 00000006 00000000 [ 49.708677] 3fc0: 00000000 00000880 bea01cc8 00000081 00000097 0000cca4 0000b748 00000000 [ 49.716802] 3fe0: 4001a4f0 bea01cc0 00018bf4 4001a4fc 20000010 bea01cc8 a063e021 a063e421 [ 49.724958] [<c01a2448>] (regulator_is_enabled+0x3c/0xbc) from [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8) [ 49.734836] [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8) from [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci]) [ 49.745044] [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci]) from [<c02476d0>] (mmc_power_off+0x50/0x58) [ 49.754555] [<c02476d0>] (mmc_power_off+0x50/0x58) from [<c0247c60>] (mmc_detach_bus+0x68/0xc4) [ 49.763207] [<c0247c60>] (mmc_detach_bus+0x68/0xc4) from [<c0248678>] (mmc_stop_host+0xd4/0x1bc) [ 49.771944] [<c0248678>] (mmc_stop_host+0xd4/0x1bc) from [<c0249064>] (mmc_remove_host+0xc/0x20) [ 49.780681] [<c0249064>] (mmc_remove_host+0xc/0x20) from [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci]) [ 49.790211] [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci]) from [<c01c5708>] (platform_drv_remove+0x1c/0x24) [ 49.800164] [<c01c5708>] (platform_drv_remove+0x1c/0x24) from [<c01c44c8>] (__device_release_driver+0x7c/0xc4) [ 49.810110] [<c01c44c8>] (__device_release_driver+0x7c/0xc4) from [<c01c4570>] (driver_detach+0x60/0x8c) [ 49.819535] [<c01c4570>] (driver_detach+0x60/0x8c) from [<c01c37a4>] (bus_remove_driver+0x90/0xcc) [ 49.828452] [<c01c37a4>] (bus_remove_driver+0x90/0xcc) from [<c007b014>] (sys_delete_module+0x1d8/0x254) [ 49.837891] [<c007b014>] (sys_delete_module+0x1d8/0x254) from [<c0043f40>] (ret_fast_syscall+0x0/0x28) [ 49.847145] Code: eb06c53a e596c030 e1a0500d e59f106c (e59c0040) [ 49.853566] ---[ end trace b5fa66a00cea142f ]--- Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:28:13 +0000