aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-06-25[PATCH] drivers/char/mwave/tp3780i.c: remove kernel 2.2 #if'sAdrian Bunk
This patch removes #if's for kernel 2.2 . Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/char/isicom.c: section fixesAdrian Bunk
This patch fixes the following bugs: - __exit unregister_ioregion and unregister_drivers were called by __init isicom_init - __init isicom_init was called by __devinit isicom_setup Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/scsi/initio.c: cleanupsAdrian Bunk
This patch contains the following cleanups: - make needlessly global code static - remove or #if 0 the following unused functions: - tul_pop_pend_scb - tul_device_reset - tul_reset_scsi_bus Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] char/tty_io: replace schedule_timeout() with msleep_interruptible()Domen Puncer
Use msleep_interruptible() instead of schedule_timeout() in send_break() to guarantee the task delays as expected. Change @duration's units to milliseconds, and modify arguments in callers appropriately. Patch is compile-tested. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] char/ds1620: use msleep() instead of schedule_timeout()Domen Puncer
Not sure why any driver needs to sleep for *two* ticks, so let's fix it. Use msleep() instead of schedule_timeout() to guarantee the task delays as expected. Signals are never checked for by the callers or in the function itself, so use TASK_UNINTERRUPTIBLE instead of TASK_INTERRUPTIBLE. The delay is presumed to have been written when HZ==100, and thus has been multiplied by 10 to pass to msleep(). Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] riotty.c cleanups and warning fixM.Baris Demiray
Fix a bunch of whitespace oddities and use `unsigned long' for a jiffies-holding variable. Signed-off-by: M.Baris Demiray <baris@labristeknoloji.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] au1100fb: convert to C99 inits.randy_dunlap
au1100: use C99 struct init. Signed-off-by: randy_dunlap <rdunlap@xenotime.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/isdn/act2000/capi.c: #if 0 an unused functionAdrian Bunk
This patch #if 0's an unused function. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/isdn/hardware/avm/: misc cleanupsAdrian Bunk
This patch contains the following cleanups: - make some needlessly global functions static - b1dma.c __init/__exit the functions b1dma_{init,exit} Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] unexport mca_find_device_by_slotAdrian Bunk
I didn't find any possible modular usage of mca_find_device_by_slot in the kernel, and this patch therefore removes the EXPORT_SYMBOL. This patch should be safe since mca-legacy is nothing drivers should move to. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/isdn/i4l/: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make needlessly global code static - remove the following unused global function: - isdn_audio.c: isdn_audio_2adpcm_flush - remove the following unused struct: - isdn_net.c: isdn_concap_demand_dial_dops Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/isdn/pcbit/: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make some needlessly global functions static - remove the following unused global functions: - callbacks.c: cb_out_3 - capi.c: capi_decode_disc_conf Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/isdn/sc/: possible cleanupsAdrian Bunk
This patch contains the following possible cleanips: - make some needlessly global code static - remove the compiled but completely unused debug.c - remove or #if 0 the following unused global functions: - command.c: loopback - command.c: loadproc - init.c: irq_supported - packet.c: print_skb - shmem.c: memset_shmem - timer.c: trace_timer Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] fbdev: remove unneeded fbsysfs printkJon Smirl
Remove unneeded fbsysfs printk. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] font selection Kconfig fixesJurriaan on adsl-gate
We're accidentally selecting the new fonts by default. Don't. Signed-off-by: Jurriaan Kalkman <thunder7@xs4all.nl> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] Fix vesafb/mtrr scaling problem.Dave Jones
vesafb will do really silly things like.. mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining mtrr: type mismatch for e0000000,4000000 old: write-back new: write-combining mtrr: type mismatch for e0000000,2000000 old: write-back new: write-combining mtrr: type mismatch for e0000000,1000000 old: write-back new: write-combining mtrr: type mismatch for e0000000,800000 old: write-back new: write-combining mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x800 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x400 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x200 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x100 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x80 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x40 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x20 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x10 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x8 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x4 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x2 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x1 base: 0xe0000000 Stop scaling down at PAGE_SIZE. Also fix up some broken indentation. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] kexec code cleanupManeesh Soni
o Following patch provides purely cosmetic changes and corrects CodingStyle guide lines related certain issues like below in kexec related files o braces for one line "if" statements, "for" loops, o more than 80 column wide lines, o No space after "while", "for" and "switch" key words o Changes: o take-2: Removed the extra tab before "case" key words. o take-3: Put operator at the end of line and space before "*/" Signed-off-by: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] kdump: Use real pt_regs from exceptionAlexander Nyberg
Makes kexec_crashdump() take a pt_regs * as an argument. This allows to get exact register state at the point of the crash. If we come from direct panic assertion NULL will be passed and the current registers saved before crashdump. This hooks into two places: die(): check the conditions under which we will panic when calling do_exit and go there directly with the pt_regs that caused the fatal fault. die_nmi(): If we receive an NMI lockup while in the kernel use the pt_regs and go directly to crash_kexec(). We're probably nested up badly at this point so this might be the only chance to escape with proper information. Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] kdump: sysrq trigger mechanism for kexec based crashdumpsHariprasad Nellitheertha
Add a sysrq-trigger mechanism for kexec based crashdumps. Alt-Sysrq-c triggers a kexec based crashdump. Signed-off-by: Hariprasad Nellitheertha <hari@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] kdump: cleanups for dump file access in linear raw formatVivek Goyal
Removed the dependency on backup region. Now all the information is encoded in ELF format. /dev/oldmem is a dummy interface. User space tool need to be intelligent enough to parse the elf headers and read the relevant memory areas with the help of /dev/oldmem. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] kdump: Accessing dump file in linear raw format (/dev/oldmem)Vivek Goyal
Hariprasad Nellitheertha <hari@in.ibm.com> This patch contains the code that enables us to access the previous kernel's memory as /dev/oldmem. Signed-off-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] hpet: do_div fixJon Smirl
We don't need to use do_div() on a 32-bit quantity. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] tpm: fix misc name memory problemKylene Jo Hall
I was using invalid memory for the miscdevice.name. This patch fixes the problem which was manifested by an ugly entry in /proc/misc. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] tpm: Fix pubek parsingKylene Jo Hall
Fix parsing of the PUBEK for display which was leading to showing the wrong modulus length and modulus. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] tpm: Support new National TPMsKylene Jo Hall
This patch is work to support new National TPMs that problems were reported with on Thinkpad T43 and Thinkcentre S51. Thanks to Jens and Gang for their debugging work on these issues. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] RCU: clean up a few remaining synchronize_kernel() callsPaul E. McKenney
2.6.12-rc6-mm1 has a few remaining synchronize_kernel()s, some (but not all) in comments. This patch changes these synchronize_kernel() calls (and comments) to synchronize_rcu() or synchronize_sched() as follows: - arch/x86_64/kernel/mce.c mce_read(): change to synchronize_sched() to handle races with machine-check exceptions (synchronize_rcu() would not cut it given RCU implementations intended for hardcore realtime use. - drivers/input/serio/i8042.c i8042_stop(): change to synchronize_sched() to handle races with i8042_interrupt() interrupt handler. Again, synchronize_rcu() would not cut it given RCU implementations intended for hardcore realtime use. - include/*/kdebug.h comments: change to synchronize_sched() to handle races with NMIs. As before, synchronize_rcu() would not cut it... - include/linux/list.h comment: change to synchronize_rcu(), since this comment is for list_del_rcu(). - security/keys/key.c unregister_key_type(): change to synchronize_rcu(), since this is interacting with RCU read side. - security/keys/process_keys.c install_session_keyring(): change to synchronize_rcu(), since this is interacting with RCU read side. Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] compilation errors in drivers/serial/mpsc.cLee Nicks
The following patch fix gcc 4 compilation errors in drivers/serial/mpsc.c Signed-off-by: Lee Nicks <allinux@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] s390: debug feature changesMichael Holzheu
This patch changes the memory allocation method for the s390 debug feature. Trace buffers had been allocated using the get_free_pages() function before. Therefore it was not possible to get big memory areas in a running system due to memory fragmentation. Now the trace buffers are subdivided into several subbuffers with pagesize. Therefore it is now possible to allocate more memory for the trace buffers and more trace records can be written. In addition to that, dynamic specification of the size of the trace buffers is implemented. It is now possible to change the size of a trace buffer using a new debugfs file instance. When writing a number into this file, the trace buffer size is changed to 'number * pagesize'. In the past all the traces could be obtained from userspace by accessing files in the "proc" filesystem. Now with debugfs we have a new filesystem which should be used for debugging purposes. This patch moves the debug feature from procfs to debugfs. Since the interface of debug_register() changed, all device drivers, which use the debug feature had to be adjusted. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] s390: add vmcp interfaceChristian Borntraeger
Add interface to issue VM control program commands. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] s390: improved machine check handlingHeiko Carstens
Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] s/390: compile fix for dcssblkCornelia Huck
Fix compile breakage in the dcss block driver introduced by the attribute changes. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] s/390: use klist in dasd driverCornelia Huck
Convert the dasd driver to use the new klist interface. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] s/390: Use klist in cioCornelia Huck
Convert the common I/O layer to use the klist interfaces. This patch has been adapted from the previous version to the changed interface semantics. Also, gcc 4.0 compile warnings have been removed. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] suspend/resume SMP supportLi Shaohua
Using CPU hotplug to support suspend/resume SMP. Both S3 and S4 use disable/enable_nonboot_cpus API. The S4 part is based on Pavel's original S4 SMP patch. Signed-off-by: Li Shaohua<shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] generate hotplug events for cpu onlineNathan Lynch
We already do kobject_hotplug for cpu offline; this adds a kobject_hotplug call for the online case. This is being requested by developers of an application which wants to be notified about both kinds of events. Signed-off-by: Nathan Lynch <ntl@pobox.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] make smp_prepare_cpu to a weak functionAshok Raj
I really wish smp_prepare_cpu() would disappear eventually. In the interim this is ideally a weak function, so we dont end up changing several places to define this dummy in headers. Today since the dummy declaration is done only in drivers/base/cpu.c but the function is called in kernel/power/smp.c i get undefined reference in my cpu hotplug code for x86_64 under development. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] cpu state clean after hot removeLi Shaohua
Clean CPU states in order to reuse smp boot code for CPU hotplug. Signed-off-by: Li Shaohua<shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] I2C-MPC: Remove OCP device model supportKumar Gala
All consumers of the driver MPC10x, MPC52xx, MPC824x, MPC83xx, and MPC85xx are all using platform devices. We can get ride of the dead code to support using this driver with the old OCP based model Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] Serial: remove unnecessary register_serial/unregister_serialRussell King
A couple of drivers declare register_serial/unregister_serial prototypes but don't use them. FRV contains a commented out call to register_serial. Since these are deprecated, remove these unnecessary references. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] I8K: add new BIOS signaturesDmitry Torokhov
I8K: add BIOS signatures of a newer Dell laptops, also there can be more than one temperature sensor reported by BIOS. Lifted from driver 1.25 on Massimo Dal Zotto's site. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] I8K: initialization code cleanup; formattingDmitry Torokhov
I8K: use module_{init|exit} instead of old style #ifdef MODULE code, some formatting changes. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] I8K: convert to seqfileDmitry Torokhov
I8K: Change proc code to use seq_file. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] I8K: use standard DMI interfaceDmitry Torokhov
I8K: Change to use stock dmi infrastructure instead of homegrown parsing code. The driver now requires box's DMI data to match list of supported models so driver can be safely compiled-in by default without fear of it poking into random SMM BIOS code. DMI checks can be ignored with i8k.ignore_dmi option. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] I8K: pass through lindentDmitry Torokhov
I8K: pass through Lindent to change 4 spaces identation to TABs Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] Toshiba driver cleanupDmitry Torokhov
Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] cx88 build fixMauro Carvalho Chehab
static declaration of cx88_pci_irqs follows non-static. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-06-25ACPI: Make sure we call acpi_register_gsi() even for default PCI interrupt ↵Linus Torvalds
assignment That's the part that keeps track of the ELCR register, and we want to make sure that the PCI interrupts are properly marked level/low.
2005-06-24[TG3]: Update driver version and reldate.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-24[TG3]: Refinements to new locking strategy.Michael Chan
1. Move tp->irq_sync = 0 to before the interrupt mailbox IO in tg3_enable_ints() so that the interrupt handler will always see irq_sync == 0 when interrupts are enabled. 2. Remove the tg3_enable_ints() call in tg3_reset_hw(). Interrupts are always enabled explicitly or through tg3_netif_start(). This is to prevent interrupts being enabled while poll is disabled. 3. Update trans_start with jiffies in tg3_netif_stop() to prevent false NETDEV WATCHDOG. 4. Pass in the proper irq_sync parameter to tg3_full_lock() depending on netif_running() in some of the ethtool set calls. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 20:24:49 +0000