aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-09-24iwlwifi: remove HT flags from RXON when not in HT anymoreEmmanuel Grumbach
This patch removes the HT flags from RXON when moving from HT to legacy. This avoids keeping those flags set and possibly miss configuring firmware. If we are configured in HT, fat channel: channel 1 above, and move later to legacy channel 11, we need to clear the FAT channel control flags in RXON. If we don't, the firmware will understand this as channel 11 above which is not possible due to regulatory constraints, leading to firmware crash. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24libertas: Reduce the WPA key installation time (fixups)Javier Cardona
This patch addresses comments from Dan Williams about the patch committed as "libertas: Reduce the WPA key installation time." Signed-off-by: Javier Cardona <javier@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24ath5k: Fix bad udelay calls on AR5210 codeNick Kossifidis
* Fix bad udelay calls (using > 2000us) in AR5210 code and clean up some bits on nic_reset (AR5210 support is still in bad shape) Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24iwlwifi: make PS use named constantsTomas Winkler
This patch adds named constants for configuring MIMO power save chain settings. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24iwlwifi: don't delay scan in IBSS modeTomas Winkler
Scan need to be delayed only after association to allow EAPOL exchange. We don't need the delay for IBSS mode. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24b43: Issue warning when RFKILL_INPUT is not enabledLarry Finger
If the system is misconfigured with CONFIG_RFKILL set but CONFIG_RFKILL_INPUT not set, the built-in radio LEDs will not work. In the current code, no warning is issued. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24wireless: Read scan flags correctly on x86-64David Kilroy
The SIOCSIWSCAN handler is passed data in an iw_point structure. Some drivers erronously use an iw_param instead. On 32 bit architectures the difference isn't noticed as the flags parameter tends to be the only one used by scan handlers and is at the same offset. On 64 bit architectures the pointer in the iw_point structure means the flag parameter is at different offsets in these structures. Thanks to Jean Tourrilhes for tracking this down for orinoco, and Pavel Roskin for confirming the fix and identifying other suspect handlers. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-23aoe: Fix OOPS after SKB queue changes.David S. Miller
Reported by Thomas Graf. If we don't unlink the SKB from the queue when we send it out in aoenet_xmit(), dev_hard_start_xmit() will see skb->next as non-NULL and interpret this to mean the SKB is part of a GSO segment list. Add __skb_unlink() call to fix that. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23ppp_generic: Use skb_peek() in ppp_receive_mp_frame().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23usbatm: Use skb_queue_walk_safe() instead of by-hand implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23zd1211: Use skb_queue_walk() instead of by-hand implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23de4x5: Use skb_queue_head instead of by-hand implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22usbnet: Use skb_queue_walk_safe() instead of by-hand implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22cassini: use request_firmwareJaswinder Singh
Firmware blob looks like this... __le16 load_address unsigned char data[] [akpm@linux-foundation.org: include vmalloc.h] Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22drivers/net/wan: Use DIV_ROUND_UPJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22drivers/atm: Use DIV_ROUND_UPJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. In the case of the file drivers/atm/eni.c, I am a little bit suspicious of the -1 at the end of the affected expression. Please check that that is what is wanted. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22hci_usb: replace mb with smp_mbMing Lei
smp_mb is enough for ordering memory operations among processors,and mb is more expensive than smp_mb for UP machine, so replace it with smp_mb(). Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22irda: follow lspci device/vendor styleBjorn Helgaas
Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22mISDN: misc timerdev fixesAndi Kleen
- Remove noop VFS stubs. The VFS does that on a NULL pointer anyways. - Fix timer handler prototype to be correct - Comment ugly SMP race I didn't fix. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22mISDN: annotate iomem pointer and add staticsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22mISDN: endian annotations for struct ztHarvey Harrison
Found two possible bugs where the z1 value was used directly without byteswapping. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22drivers/isdn/capi/kcapi.c: Adjust error handling code involving capi_ctr_putJulia Lawall
After calling capi_ctr_get, error handling code should call capi_ctr_put. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S; position p1,p2,p3; @@ ( if ((x = capi_ctr_get@p1(...)) == NULL || ...) S | x = capi_ctr_get@p1(...) ... when != x if (x == NULL || ...) S ) <... if@p3 (...) { ... when != capi_ctr_put(x) when != if (x) { ... capi_ctr_put(x); ...} return@p2 ...; } ...> ( return x; | return 0; | x = E | E = x | capi_ctr_put(x) ) @exists@ position r.p1,r.p2,r.p3; expression x; int ret != 0; statement S; @@ * x = capi_ctr_get@p1(...) <... * if@p3 (...) S ...> * return@p2 \(NULL\|ret\); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22cxgb3: Use SKB list interfaces instead of home-grown implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21bluetooth: hci_bcsp: Use SKB list interfaces instead of home-grown stuff.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21aoe: Use SKB interfaces for list management instead of home-grown stuff.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21atm: idt77252: Use generic SKB queue management instead of home-grown scheme.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21net: Remove __skb_insert() calls outside of skbuff internals.David S. Miller
This minor cleanup simplifies later changes which will convert struct sk_buff and friends over to using struct list_head. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-09-19qlge: Protect qlge_resume() with CONFIG_PMDavid S. Miller
Fixes the following build warning: drivers/net/qlge/qlge_main.c:3897: warning: ‘qlge_resume’ defined but not used Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19qlge: Fix warnings in debugging code.David S. Miller
drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_qdev’: drivers/net/qlge/qlge_dbg.c:369: warning: cast to pointer from integer of different size drivers/net/qlge/qlge_dbg.c:373: warning: cast to pointer from integer of different size drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_tx_ring’: drivers/net/qlge/qlge_dbg.c:457: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:461: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_rx_ring’: drivers/net/qlge/qlge_dbg.c:557: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:565: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:575: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:579: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:598: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:602: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19Merge branch 'new-drivers' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-09-18bnx2: Remove timer_interval field from the bnx2 structureBenjamin Li
The timer_interval field is only assigned once, and never reassigned. We can safely replace all instances of the timer_interval with a constant value. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18bnx2: Remove name field from bnx2 structureBenjamin Li
The name of the board is only used during the initialization of the adapter. We can save the space of a pointer by not storing this information. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18bnx2: Update MODULE_DESCRIPTION to include the 5716Benjamin Li
Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18bnx2: In bnx2_set_mac_link() return void rather then intBenjamin Li
bnx2_set_mac_link() doesn't need to return any error codes. And all the callers don't check the return code. It is safe to change the return type to a void. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18qlge: New Qlogic 10Gb Ethernet Driver.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18jme: JMicron Gigabit Ethernet DriverGuo-Fu Tseng
Supporting JMC250, and JMC260. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Acked-and-tested-by: Ethan Hsiao <ethanhsiao@jmicron.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18enic: add Cisco 10G Ethernet NIC driverScott Feldman
Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18atl2: add atl2 driverChris Snook
Driver for Atheros L2 10/100 network device. Includes necessary changes for Kconfig, Makefile, and pci_ids.h. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-15libertas: correct "limited range of data type" warningJohn W. Linville
CC [M] drivers/net/wireless/libertas/wext.o drivers/net/wireless/libertas/wext.c: In function ‘lbs_get_rts’: drivers/net/wireless/libertas/wext.c:307: warning: comparison is always false due to limited range of data type Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15orinoco: Fix compile warningsDavid Kilroy
Use min_t to avoid warnings when the typesafe version is used. Explicitly cast u64s to unsigned long long when being passed to printk. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15mac80211 hwsim: make radio list dynamicJohannes Berg
This paves the way for dynamic radio additions while the module is loaded. Also restrict the number of radios to 100 because creating that many already takes forever. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15mac80211: fix virtual interfaces vs. injectionJohannes Berg
Currently, virtual interface pointers passed to drivers might be from monitor interfaces and as such completely uninitialised because we do not tell the driver about monitor interfaces when those are created. Instead of passing them, we should therefore indicate to the driver that there is no information; do that by passing a NULL value and adjust drivers to cope with it. As a result, some mac80211 API functions also need to cope with a NULL vif pointer so drivers can still call them unconditionally. Also, when injecting frames we really don't want to pass NULL all the time, if we know we are the source address of a frame and have a local interface for that address, we can to use that interface. This also helps with processing the frame correctly for that interface which will help the 802.11w implementation. It's not entirely correct for VLANs or WDS interfaces because there the MAC address isn't unique, but it's already a lot better than what we do now. Finally, when injecting without a matching local interface, don't assign sequence numbers at all. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15libertas: Reduce the WPA key installation time.Javier Cardona
WPA requires that the PTK is installed immediately after the 4-way handshake in order to properly decrypt the subsequent incoming EAPOL-GTK frame. If the PTK is not enabled by the time the EAPOL-GTK frame arrives, the frame is dropped and the supplicant does not receive the group key. This will happen with fast Access Points that send the EAPOL-GTK frame before the suplicant has successfully installed and enabled the PTK. To mitigate this situation, this patch simplifies and accelerates the SIOCSIWENCODEEXT execution. This patch resolves OLPC ticket 7825 (http://dev.laptop.org/ticket/7825) Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15b43: fix QoS parameters initializationLorenzo Nava
This fixes the initialization of QoS parameters. Reported-by: Lorenzo Nava, Francesco Gringoli Signed-off-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15iwl3945: add MODULE_FIRMWARE for 3945 HWZhu Yi
This patch adds MODULE_FIRMWARE statement for 3945 HW. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15iwlwifi: add MODULE_FIRMWARE for 5000 HWTomas Winkler
This patch adds MODULE_FIRMWARE statement for 5000 HW. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15iwlwifi: update 5350 Wifi PCI IDsTomas Winkler
This patch updates PCI IDs for 5350 Wifi/WiMax. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15iwlwifi: don't access mac80211's AMPDU state machineJohannes Berg
There really is no need, at worst ieee80211_start_tx_ba_session will log a message when debugging is enabled, and poking such internals of mac80211 definitely doesn't belong into an RC algorithm. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 23:56:20 +0000