aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-07-24rt2x00: Comment spellcheckingLuis Correia
Fix a bunch of spelling errors in the rt2x00 drivers Signed-off-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: change iwl_enable/disable_interrupts to "inline"Wey-Yi Guy
iwl_enable_interrupts is being called inside the interrupt, change from function call to inline Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: inform user about rfkill state changesReinette Chatre
rfkill state changes are mostly available through debug messages. These are significant enough to always make user aware of so we turn them into warnings. Also insert a missing newline in some rfkill related debug message. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: clarify hardware error messageReinette Chatre
When a hardware error is detected we need to be clear about that and not create impression that the microcode is able to deal with it. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: make debug level more user friendlyReinette Chatre
* Deprecate the "debug50" module parameter used to obtain 5000 series and up debugging. Replace it with "debug" module parameter to match with original driver and be consistent between them. The "debug50" module parameter can still be used, except that the module parameter is not writable in keeping with its previous state. We currently just mark it as "deprecated" and do not have it in the feature-removal-schedule. Some more cleanup of module parameters needs to be done and can then be entered together. * Only make "debug" module parameters visible if the driver is compiled with CONFIG_IWLWIFI_DEBUG. This will eliminate a lot of confusion where users think they have set debug flags but yet cannot see any debug output. * Make module parameters writable. This eliminates the need for the "debug_level" sysfs file, which can now also be deprecated and added to feature-removal-schedule. This file is in significant use though with many iwlwifi documents and text referring users to it. We can thus not take its removal lightly and keep it around. With iwlcore shared between iwlagn and iwl3945 we really do not need debug module parameters for each but can instead have one debug module parameter for the iwlcore module. The same issue is here as with the sysfs file - a lot of iwlwifi documentation and text (like bug reports) rely on iwlagn and iwl3945 having this module parameter, so changing this to a module parameter of iwlcore will have significant impact and we do not do this for that reason. One consequence of this patch is that if a user is running a system with both 3945 and later hardware then the setting of the one module parameter will affect the value of the other. The likelihood of this seems low - and even if this setup is present it does not seem like an issue for both modules to run with the same debug level. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: uCode Alive notification with timeoutWey-Yi Guy
Wait for REPLY_ALIVE notification from init and runtime uCode. based on the type of REPLY_ALIVE, different status bit will be set to wake up the queue: STATUS_INIT_UCODE_ALIVE for init uCode STATUS_RT_UCODE_ALIVE for runtime uCode. If timeout, attempt to download the failing uCode image again. This can only be done for the init ucode images of all iwlagn devices and the runtime ucode image of the 5000 series and up. If there is a problem with the 4965 runtime ucode coming up we restart the interface and thus trigger a new download of the init ucode also. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: update 1000 series API version to match firmwareJay Sternberg
firmware file now contains build number so API needs to be updated. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: checking unknown HW typeWey-Yi Guy
When deciding NVM type, if the HW type is unknown, report error and exit with -ENOENT. This check should prevent incorrect behavior by assuming the wrong NVM type. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: Led blinking counting both tx and rxWey-Yi Guy
For controlling led blinking, counting both tx and rx data traffic; this will be able to handle traffic in either direction Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: add led debugfs functionWey-Yi Guy
Adding debugfs file to show current led blinking rate /sys/kernel/debug/ieee80211/phy0/iwlagn/data/led Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlagn: do not send key clear commands when rfkill enabledReinette Chatre
Do all key clearing except sending sommands to device when rfkill enabled. When rfkill enabled the interface is brought down and will be brought back up correctly after rfkill is enabled again. Same change is not needed for iwl3945 as it ignores return code when sending key clearing command to device. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13742 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: make led functions genericWey-Yi Guy
Led functions are generic for all the devices except 3945, so remove the reference to 4965 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: Handle new firmware file with ucode build number in headerJay Sternberg
Adding new API version to account for change to ucode file format. New header includes the build number of the ucode. This build number is the SVN revision thus allowing for exact correlation to the code that generated it. The header adds the build number so that older ucode images can also be enhanced to include the build in the future. some cleanup in iwl_read_ucode needed to ensure old header not used and reduce unnecessary references through pointer with the data is already in heap variable. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: fix rx signal quality reporting in dmesgWey-Yi Guy
Fix quality incorrectly reported as signal strength value. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlagn: modify digital SVR for 1000Wey-Yi Guy
On 1000, there are two Switching Voltage Regulators (SVR). The first one apply digital voltage level (1.32V) for PCIe block and core. We need to use this regulator to solve a stability issue related to noisy DC2DC line in the silicon. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: fix a fw crash caused by statistic feedbackChristian Lamparter
This patch fixes a bug which crawled into the tree with the split-up changes. The memory-manager wasn't aware of the statistic feedback extra_len space requirements and happily placed following frames into the allegedly free spots. Thanks fly out to Larry Finger for taking the time to test all (permutations of) patches and theories all day long. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: fix beaconing related firmware crashChristian Lamparter
This patch fixes a firmware crash which can be provoked by changing operation mode. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24p54: remove useless codeChristian Lamparter
This patch removes some useless checks in recv/xmit code. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove key caches in driverZhu Yi
cfg80211 now guarantees keys are set after connecting. We can remove the key cache code from the driver now. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: make iwm_send_wifi_if_cmd return 0 on successZhu Yi
We used to return the result of wait_event_interruptible_timeout() which is the remaining timeout on success. But this information is not used by any of its callers. So we just return 0 on success. This fixed a erroneous return value bug for iwm_set_key(). Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove setting WEP keys before setting essid supportZhu Yi
The recent cfg80211 "rework key operation" patch from Johannes Berg makes sure keys are set only after the connection has been established. So we can remove the setting WEP keys before essid support from the driver. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: cfg80211 managed mode portSamuel Ortiz
This patch ports iwmc3200wifi to the cfg80211 managed mode API. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: use correct debug levelZhu Yi
This patch uses TX and RX instead of NTF debug levels in some hot paths. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: set cipher_suites before registering wiphyZhu Yi
We need to specify all the cipher suites we supported. Otherwise cfg80211_validate_key_settings() will fail when we are setting keys. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: hardware does not support IP checksumZhu Yi
The iwmc3200wifi hardware doesn't support IP checksum. So mark the skb->ip_summed to CHECKSUM_NONE instead of CHECKSUM_UNNECESSARY. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: fix UMAC INIT_COMPLETE notification handlingZhu Yi
The patch fixes the missing UMAC iwm_umac_wifi_in_hdr header in the UMAC INIT_COMPLETE (iwm_umac_notif_init_complete) notification. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24hostap_cs: Enable shared interruptsLarry Finger
The hostap_cs driver is programmed for exclusive rather that shared interrupts. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-and-Tested-by: Jack Schneider <puck@dp-indexing.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24wireless: remove print_mac usesJohannes Berg
Use %pM instead, and also remove stray variables declared with DECLARE_MAC_BUF. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Add AR9287 based chipsets' register information.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: disable radio when all devices are marked idleLuis R. Rodriguez
This uses the new configuration changes indicated up by mac80211 when all interfaces are marked idle. We need to do a little more work as we have our own set of virtual wiphys within ath9k. Only when all virtual wiphys are inactive do we allow an idle state change for a wiphy to trigger disabling the radio. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: serialize ath9k_ps_{wakeup,restore} callsGabor Juhos
These functions are changing the power mode of the chip, but this may have unpredictable effects, if another code are trying to set the power mode via 'ath9k_hw_setpower' in the same time from another context. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: uninline ath9k_ps_{wakeup,restore} functionsGabor Juhos
Uninline these functions before we add functional changes to them. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: serialize ath9k_hw_setpower callsGabor Juhos
Because ath9k_setpower is called from various contexts, we have to protect it against concurrent calls. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Remove pointless ath9k_ps_restore() in ath_detach()Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Handle tx desc shortage more appropriatelyVasanthakumar Thiagarajan
Update tx BA window and complete the frame as failed one if we can't clone the holding descriptor due to unavailability of descriptors. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Remove bogus assert in ath_clone_txbuf()Vasanthakumar Thiagarajan
oops, this one should be part of the original patch "ath9k: downgrade assert in ath_clone_txbuf()" Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Fix TX hang issue with Atheros chipsetsSenthil Balasubramanian
The hardware doesn't generate interrupts in some cases and so work around this by monitoring the TX status periodically and reset the chip if required. This behavior of the hardware not generating the TX interrupts can be noticed through ath9k debugfs interrupt statistics when heavy traffic is being sent from STA to AP. One can easily see this behavior when the STA is transmitting at a higher rates. The interrupt statistics in the debugfs interface clearly shows that only RX interrupts alone being generated and TX being stuck. TX should be monitored through a timer and reset the chip only when frames are queued to the hardware but TX interrupts are not generated for the same even after one second. Also, we shouldn't remove holding descriptor from AC queue if it happens to be the only descriptor and schedule TX aggregation regarless of queue depth as it improves scheduling of AMPDUs from software to hardware queue. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: RX stucks during heavy traffic in HT40 mode.Senthil Balasubramanian
Running iperf along with p2p traffic on both TX and RX side then stop one side, then stop the other side, then start it up again, eventually the STA gets into a mode that it can not pass data at all. A hardware workaround for invalid RSSI can make FIFO write pointer to jump over read pointer, causing RX data corruption and repeated DMA. Both TX and RX works fine when the workaround is disabled. To replace the original hardware work around, software looks for frames with post delimiter CRC error and mark the RSSI invalid so that the upperlayer will not use the RSSI associated with this frame. So disable the hardware workaround by updating the appropriate registers. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Manipulate and report the correct RSSISenthil Balasubramanian
RSSI reported by the RX descriptor requires little manipulation. Manipulate and report the correct RSSI to the stack. This will fix the improper signal levels reported by iwconfig iw dev wlanX station dump. Also the Link Quality reported seems to be varying (falls to zero also sometimes) when iperf is run from STA to AP. Also use the default noise floor for now as the one reported during the caliberation seems to be wrong. The Signal and Link Quality before this patch (taken while TX is in progress from STA to AP) 09:59:13.285428037 Link Quality=29/70 Signal level=-81 dBm 09:59:13.410660084 Link Quality=20/70 Signal level=-90 dBm 09:59:13.586864392 Link Quality=21/70 Signal level=-89 dBm 09:59:13.710296281 Link Quality=21/70 Signal level=-89 dBm 09:59:13.821683064 Link Quality=25/70 Signal level=-85 dBm 09:59:13.933402989 Link Quality=24/70 Signal level=-86 dBm 09:59:14.045839276 Link Quality=26/70 Signal level=-84 dBm 09:59:14.193926673 Link Quality=23/70 Signal level=-87 dBm 09:59:14.306230262 Link Quality=31/70 Signal level=-79 dBm 09:59:14.419459667 Link Quality=26/70 Signal level=-84 dBm 09:59:14.530711167 Link Quality=37/70 Signal level=-73 dBm 09:59:14.642593962 Link Quality=29/70 Signal level=-81 dBm 09:59:14.754361169 Link Quality=21/70 Signal level=-89 dBm 09:59:14.866217355 Link Quality=21/70 Signal level=-89 dBm 09:59:14.976963623 Link Quality=28/70 Signal level=-82 dBm 09:59:15.089149809 Link Quality=26/70 Signal level=-84 dBm 09:59:15.205039887 Link Quality=27/70 Signal level=-83 dBm 09:59:15.316368003 Link Quality=23/70 Signal level=-87 dBm 09:59:15.427684036 Link Quality=36/70 Signal level=-74 dBm 09:59:15.539756380 Link Quality=21/70 Signal level=-89 dBm 09:59:15.650549093 Link Quality=22/70 Signal level=-88 dBm 09:59:15.761171672 Link Quality=32/70 Signal level=-78 dBm 09:59:15.872793750 Link Quality=23/70 Signal level=-87 dBm 09:59:15.984421694 Link Quality=22/70 Signal level=-88 dBm 09:59:16.097315093 Link Quality=21/70 Signal level=-89 dBm The link quality and signal level after this patch (take while TX is in progress from STA to AP) 17:21:25.627848091 Link Quality=65/70 Signal level=-45 dBm 17:21:25.762805607 Link Quality=65/70 Signal level=-45 dBm 17:21:25.875521888 Link Quality=66/70 Signal level=-44 dBm 17:21:25.987468448 Link Quality=66/70 Signal level=-44 dBm 17:21:26.100628151 Link Quality=66/70 Signal level=-44 dBm 17:21:26.213129671 Link Quality=66/70 Signal level=-44 dBm 17:21:26.324923070 Link Quality=65/70 Signal level=-45 dBm 17:21:26.436831357 Link Quality=65/70 Signal level=-45 dBm 17:21:26.610356973 Link Quality=65/70 Signal level=-45 dBm 17:21:26.723340047 Link Quality=65/70 Signal level=-45 dBm 17:21:26.835715293 Link Quality=64/70 Signal level=-46 dBm 17:21:26.949542748 Link Quality=64/70 Signal level=-46 dBm 17:21:27.062261613 Link Quality=65/70 Signal level=-45 dBm 17:21:27.174511563 Link Quality=64/70 Signal level=-46 dBm 17:21:27.287616232 Link Quality=64/70 Signal level=-46 dBm 17:21:27.400598119 Link Quality=64/70 Signal level=-46 dBm 17:21:27.511381404 Link Quality=64/70 Signal level=-46 dBm 17:21:27.624530421 Link Quality=65/70 Signal level=-45 dBm 17:21:27.737807109 Link Quality=64/70 Signal level=-46 dBm 17:21:27.850861352 Link Quality=65/70 Signal level=-45 dBm 17:21:27.963369436 Link Quality=64/70 Signal level=-46 dBm 17:21:28.076582289 Link Quality=64/70 Signal level=-46 dBm Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Nuke struct ath_tx_ratectrl_stateVasanthakumar Thiagarajan
Move its only member (u8 per) to struct ath_rate_priv. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Use probe interval instead of rssi reduce intervalVasanthakumar Thiagarajan
Get rid of rssi reduce interval. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Remove unused members from rate control structureVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: Remove dead code in rate controlVasanthakumar Thiagarajan
ath9k rate control is based on only PER (packet error rate), remove unused code which was intented to do rssi based rate selection. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove rate control wraperLuis R. Rodriguez
After the cleanup we just use get_rate as a wrapper, skip the wrapper. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: add helper for management / no-ack frame rate decisionLuis R. Rodriguez
All current rate control algorithms agree to send management and no-ack frames at the lowest rate. They also agree to do this when sta and the private rate control data is NULL. We add a hlper to mac80211 for this and simplify the rate control algorithm code. Developers wishing to make enhancements to rate control algorithms are for broadcast/multicast can opt to not use this in their gate_rate() mac80211 callback. Cc: Zhu Yi <yi.zhu@intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc: ipw3945-devel@lists.sourceforge.net Cc: Gabor Juhos <juhosg@openwrt.org> Acked-by: Felix Fietkau <nbd@openwrt.org> Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwlwifi: use ieee80211_is_data(fc)Luis R. Rodriguez
iwl-agn-rs.c already uses this. Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: ipw3945-devel@lists.sourceforge.net Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove unnecessary IEEE80211_TX_CTL_NO_ACK checksLuis R. Rodriguez
We check for this condition early on in our mac80211 get_rate() callback ath_get_rate(), so remove this check later down the path. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: rename ath_rc_ratefind_ht() to ath_rc_get_highest_rix()Luis R. Rodriguez
The purpose is to find the highest rate we can use. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remap ATH9K_MODE_*Luis R. Rodriguez
There are a lot of gaps here. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24ath9k: remove ATH9K_MODE_11BLuis R. Rodriguez
This saves us 2733 bytes. text data bss dec hex filename 252265 3628 1584 257477 3edc5 ath9k-has-b-rate.ko 249905 3628 1584 255117 3e48d ath9k.ko Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Siged-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 16:03:47 +0000