aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-06-14iwlwifi: clean up in setup/cancel deferred workEmmanuel Grumbach
This patch makes some clean up in setup/cancel_deferred_work. iwl_setup_deferred_work does the work that is common to 4965 and 5000, then it calls to HW specific handlers. This patch also removes uneeded work_struct from iwl_priv. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: removes the RUN_TIME_CALIB ifdefEmmanuel Grumbach
This patch removes the possibility not to compile the run time calibrations. It also renames priv->sensitivity_work to priv->run_time_calib_work, and moves bg_run_time_calib to iwl4965_base since it is common to both: 4965 and 5000. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14libertas: rename some registers to clarify their meaningHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14libertas: check for old, unsupported hardwareHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14libertas: document register meaningsHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14libertas: fix interrupt issueHolger Schurig
This helps against lost interrupts and aids in debugging this. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: removing IWL4965_HT configRon Rindjunsky
This patch removes CONFIG_IWL4965_HT #ifdefs for iwl 4965 and 5000. 11n feature is stable in those drivers and its mode of operation is determined in mac80211, so this dependency is not needed any more. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: cleanup: rename and remove local pointersJussi Kivilinna
Mixed use of 'dev' and 'usbdev' for usbnet pointer can be confusing. So changing all 'usbnet *dev' to 'usbnet *usbdev'. Also remove 'net_device *net' pointer from 'rndis_wext_bind' as 'usbdev->net' were already used where needed. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: check if set_multicast_list work is already scheduledJussi Kivilinna
Don't queue set_multicast_list work if WORK_SET_MULTICAST_LIST flag already set. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: update carrier flag when link state changesJussi Kivilinna
Driver wasn't updating netif_carrier on link state changes but assumed link layer was always up. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: do link-down state change in worker threadJussi Kivilinna
rndis_wext_link_change() is called from within rndis_command() so it isn't very good place to do any work. Move to worker thread. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14airo: use simple_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Rework alignment check.Gertjan van Wingerde
Rework the alignment check in rt2x00dev.c to be independent of any potential alignment measures that may be taken before. Just check whether the payload is aligned based on the pointer addresses. Note: This is preparatory for the dynamically mapped skb buffers for the PCI drivers, as these need 4-byte alignment instead of the currently enforced offset by 2 bytes. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Remove unused definesIvo van Doorn
MAX_RX_SSI and MAX_NOISE are no longer used, it is better to remove them entirely. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Clear IEEE80211_TX_CTL_USE_RTS_CTS flag for RTS frameIvo van Doorn
For RTS/CTS-to-self frames the IEEE80211_TX_CTL_USE_RTS_CTS flag should be cleared for the tx_info flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Use __builtin_choose_expr() instead of ?:Ivo van Doorn
To really force the FIELD macros to determine the first bit of the register field we should use the __builtin_choose_expr() function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Fix double usage of skb->cb in USB RX path.Gertjan van Wingerde
It is not safe to use the skb->cb area for both the rxd and skb_frame_desc data at the same time, while they occupy an overlapping piece of memory. This can lead to hard to trace crashes as pointers within skb_frame_desc are pointing into nowhere, or the rxd data is overwritten with non-sense. Fix it by copying the rxd to a small buffer on the stack. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Centralize RX packet alignment handling in rt2x00lib.Gertjan van Wingerde
When rt2x00pci will be switched over to dynamically mapped skb's instead of statically allocated DMA buffers, it no longer can handle alignment of RX packets in a copy step, and needs to implement the same scheme as rt2x00usb does. In order to make the patch on dynamically mapped skb's smaller, already centralize the alignment handling into rt2x00lib. This allows us to move more code in rt2x00lib, and thus remove code duplication between rt2x00usb and rt2x00pci. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Cleanup struct skb_frame_desc.Gertjan van Wingerde
The data and data_len fields aren't really necessary in struct skb_frame_desc, as they can be deduced from the skb itself. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Don't kick TX queue after each frameIvo van Doorn
TX queues shouldn't be kicked after each frame that is put into the queue. This could cause problems during RTS and CTS-to-self as well as with fragmentation. In all those cases you want all frames to be send out in a single burst. Off course we shouldn't let the queue fill up entirely, thus we introduce a 10% threshold which, when reached, will force the frames to be send out regardless of the frame. In addition we should prevent queues to become full in such a way that the tx() handler can fail. Instead of stopping the queue when it is full, we should stop it when it is below the threshold. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Move generic TX frame writing code into rt2x00queueIvo van Doorn
The write_tx_data functions in rt2x00pci and rt2x00usb have a lot in common. This moves that duplicate code into rt2x00queue_write_tx_frame(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Implement rt2x00usb_kick_tx_queue()Ivo van Doorn
rt2x00usb_kick_tx_queue() will loop over all entries within the INDEX_DONE->INDEX range and kick each entry which is pending to be kicked. This makes the kick_tx_queue approach work the same as with the PCI drivers which will allow for more code generalisation into rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Fix queue initializationIvo van Doorn
qid should be initialized to QID_BEACON and QID_ATIM for the beacon and atim quue. This makes checking for a particular queue much saner, and it shouldn't harm, because the only places where the value is send to the hardware, we are allowed to send any value we want since it is only used as argument in the TX done register. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Release rt2x00 2.1.7Ivo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Make rt2x00_set/get_field macrosIvo van Doorn
The rt2x00_set_field functions are very often used, but GCC is better able to optimize them when they are macros instead of static inline functions. After changing it to macro's each rt2x00 driver will loose about ~3500 bytes in size. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Removed unused descriptor read in txdoneIvo van Doorn
rt2x00usb doesn't need the TX descriptor in the TX done path. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Remove CTS/RTS check in tx()Ivo van Doorn
mac80211 doesn't send RTS or CTS-to-self frames through the tx() callback functions so we don't need to check it. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Move led initialization into functionIvo van Doorn
Reduce code duplication by moving led structure initialization into a per-driver function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Cleanup/optimize set_state() function callback functionIvo van Doorn
* Reduce goto usage * Mark if-statements which are true on hardware error unlikely() * Cleanup debug messages This makes the code look nicer and be better optimized since the chance of hardware errors should be very small. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Calculate register offset during compile timeIvo van Doorn
By using __ffs() the register offsets were always calculated at run-time which all FIELD32/FIELD16 definitions were builtin constants. This means we can heavily optimize the register handling by allowing GCC to do all the work during compilation. Add some compile_ffs() macros to perform the calculation at compile time. After this each rt2x00 module size is reduced by ~2500 bytes. And the stack size of several functions is reduced as well which further limits the number of rt2x00 results in 'make checkstack'. v2: Merge GertJan's bugfix of patch [1/11] directly into this patch       instead of providing it as seperate patch. v3: Add extra parentheses when bitshifting __x Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-12Merge branch 'davem-next' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-06-11irda: remove CVS keywordsAdrian Bunk
This patch removes CVS keyword that weren't updated for a long time. One of them was printed as part of a printk, which also doesn't make much sense for a 5 year old and no longer updated keyword. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11[netdrvr] Fix 8390 build breakageStephen Rothwell
From: tony@bakeyournoodle.com (Tony Breeds) The commit 3f8cb098859bbea29d7b3765a3102e4a6bf81b85 (drivers/net/lib8390: fix warning, trim trailing whitespace) removed ei_local from ei_tx_err() and ei_rx_overrun() resulting in the following build errors on m68k and sh: Using /scratch1/tony/next as source for kernel GEN /scratch1/tony/next_out/Makefile CHK include/linux/version.h CHK include/linux/utsrelease.h CALL /scratch1/tony/next/scripts/checksyscalls.sh CHK include/linux/compile.h CC [M] drivers/net/zorro8390.o In file included from /scratch1/tony/next/drivers/net/zorro8390.c:47: drivers/net/lib8390.c: In function 'ei_tx_err': drivers/net/lib8390.c:556: error: 'ei_local' undeclared (first use in this function) drivers/net/lib8390.c:556: error: (Each undeclared identifier is reported only once drivers/net/lib8390.c:556: error: for each function it appears in.) drivers/net/lib8390.c: In function 'ei_rx_overrun': drivers/net/lib8390.c:823: error: 'ei_local' undeclared (first use in this function) make[3]: *** [drivers/net/zorro8390.o] Error 1 make[2]: *** [drivers/net] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 The problem is that ei_inb_p() is using various #defines (from drivers/net/8390.h) that use EI_SHIFT, which in some drivers on some architectures use ei_local. Tag ei_local as "__maybe_unused" to keep it around and keep the warnings the original commit is trying to silence ... silenced. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11e1000e: allow VLAN devices to use TSO and TCP CSUM offloadJeff Kirsher
Using the new interface for propagating device feature flags into VLAN devices, turn on TSO and CSUM offload on VLAN devices. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11igb: allow vlan devices to use TSO and TCP CSUM offloadJeff Kirsher
Using the new interface for propagating device feature flags into VLAN deivces, turn on TSO and CSUM offload on VLAN devices. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11ixbge: allow vlan devices to use TSO and TCP CSUM offloadJeff Kirsher
Using the new interface for propagating device feature flags into VLAN devices, turn on TSO and CSUM offload on VLAN devices. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11HSO: add option hso driverGreg Kroah-Hartman
This driver is for a number of different Option devices. Originally written by Option and Andrew Bird, but cleaned up massivly for acceptance into mainline by me and others. Many thanks to the following for their help in cleaning up the driver by providing feedback and patches to it: - Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - Oliver Neukum <oliver@neukum.org> - Alan Cox <alan@lxorguk.ukuu.org.uk> - Javier Marcet <javier@krausbeck.org> Cc: Andrew Bird <ajb@spheresystems.co.uk> Cc: Javier Marcet <javier@krausbeck.org> Cc: Filip Aben <f.aben@option.com> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11drivers/net/macsonic.c: make functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - macsonic_init() - mac_onboard_sonic_ethernet_addr() - mac_onboard_sonic_probe() - mac_nubus_sonic_ethernet_addr() - macsonic_ident() - mac_nubus_sonic_probe() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11drivers/net/: remove write-only "last_dev"Adrian Bunk
This patch removes write-only global "last_dev" variables from the following drivers: - a2065.c - declance.c - sunlance.c Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11drivers/net/mac8390.c: make functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - mac8390_ident() - mac8390_testio() - mac8390_memsize() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11make hplance_{init,cleanup}_module() staticAdrian Bunk
This patch makes the needlessly global hplance_{init,cleanup}_module() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11make drivers/net/atarilance.c:lance_addr_list[] staticAdrian Bunk
This patch makes the needlessly global lance_addr_list[] static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11macb: use random mac if stored address in EEPROM is invalidSven Schnelle
We should use a random mac address if the EEPROM doesn't contain a valid one. This makes life on Boards with unprogrammed EEPROM devices easier. Signed-off-by: Sven Schnelle <svens@stackframe.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11net: sh_eth: add support for Renesas SuperH EthernetNobuhiro Iwamatsu
Add support for Renesas SuperH Ethernet controller. This driver supports SH7710 and SH7712. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11smc911x: SuperH architecture supportMagnus Damm
Enable the smc911x driver for the SuperH architecture. While at it remove the unused SMC_USE_SH_DMA definition. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11smc911x: introduce platform data flagsMagnus Damm
This patch adds a new header file for platform data information together with code that adds run time bus width and irq flag support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11smc911x: pass along private data and use iomemMagnus Damm
This patch contains changes needed for platform data support: - Move smc911x_local structure to header file - Pass along smc911x_local structure pointer to macros - Keep register base address in smc911x_local structure - Remove unused ioaddr variables [m.kozlowski@tuxland.pl: Parenthesis fix in drivers/net/smc911x.h] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11smc911x: fix 16-bit I/O operationsMagnus Damm
This patch fixes the following issues related to 16-bit support: - Remove unused 16-bit PXA DMA implementation. - Remove unused SMC_inw() and SMC_outw() functions. - Fix 16-bit SMC_outl to use writew() instead of writel(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-11smc911x: remove unused 8-bit I/O operationsMagnus Damm
Remove unused SMC_inb() and SMC_outb() functions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10bluetooth: hci_bcsp.c small cleanups/api usersHarvey Harrison
Use bitrev16 from lib/bitrev.c. Use the get_unaligned_be16 to get the crc from the packet, create a small helper function for this. Fix a shadowed variable sparse warning: drivers/bluetooth/hci_bcsp.c:218:26: warning: symbol 'hdr' shadows an earlier one drivers/bluetooth/hci_bcsp.c:187:5: originally declared here [akpm@linux-foundation.org: select CONFIG_BITREVERSE, noted by akinobu.mita@gmail.com] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>