aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-08-24Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-24[PATCH] sata_via: use old SCR access pattern on vt6420Tejun Heo
vt6420 has super-fragile SCR registers which can hang the whole machine if accessed with the wrong timings. This patch makes sata_via use SCR registers only during probing and with the same timings as before (pre new EH), which is proven to work. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24[PATCH] ata_piix: implement force_pcs module parameterTejun Heo
This patch implements force_pcs module parameter for ata_piix. If 1, PCS is ignored, 2 honored. As there seem to be quite a few ICHs w/ impaired PCS, this option will be useful for cases where the default setting doesn't work. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24[PATCH] ata_piix: ignore PCS on ICH5Tejun Heo
There have been a number of reports regarding some ICH5s failing to detect devices since the PCS handling update. Analysis shows that these problems are caused by bogus PCS values from those controllers. Before the PCS update, the driver didn't honor PCS regs exactly and probed them in many cases PCS reports no device. Now that PCS is honored exactly, these hardware problems are visible. This patch makes ICH5 ignore PCS. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24Clean up drivers/ata/Kconfig a bit.Jeff Garzik
2006-08-24[PATCH] CONFIG_PM=n slim: drivers/scsi/sata_sil*Alexey Dobriyan
Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24[PATCH] sata_via: Add SATA support for vt8237aJay Cliburn
This patch adds support for the VIA Technologies VT8237A SATA controller, used, for example, on the ASUS M2V socket AM2 motherboard. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-22Merge branch 'upstream-fixes' into upstreamJeff Garzik
Conflicts: drivers/ata/ata_piix.c
2006-08-22[PATCH] ata_piix: fix ghost device probing by honoring PCS present bitsTejun Heo
Move out PCS handling from piix_sata_prereset() into piix_sata_present_mask() and use it from newly implemented piix_sata_softreset(). Class codes for devices which are indicated to be absent by PCS are cleared to ATA_DEV_NONE. This fixes ghost device problem reported on ICH6 and 7. This patch moves PCS handling from prereset to softreset, which makes two behavior changes. * perform softreset even when PCS indicates no device * PCS handling is repeated before retrying softresets due to reset failures. Both behavior changes are intended and more consistent with how other drivers behave. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] libata: s/CONFIG_SCSI_SATA/CONFIG_[S]ATA/g in pci/quirks.cTejun Heo
drivers/pci/quirks.c was not updated when libata config constants were renamed braking several libata quirks. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-19Merge branch 'master' into upstream-fixesJeff Garzik
2006-08-17[PPP]: handle kmalloc failures and convert to using kzallocPanagiotis Issaris
The PPP code contains two kmalloc()s followed by memset()s without handling a possible memory allocation failure. (Suggested by Joe Perches). And furthermore, conversions from kmalloc+memset to kzalloc. [akpm@osdl.org: fix error-path leak] [akpm@osdl.org: cleanups] [paulus@samba.org: don't add useless printk and cardmap_destroy calls] Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[BNX2]: Convert to netdev_alloc_skb()Michael Chan
Convert dev_alloc_skb() to netdev_alloc_skb() and increase default rx ring size to 255. The old ring size of 100 was too small. Update version to 1.4.44. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17[BNX2]: Fix tx race condition.Michael Chan
Fix a subtle race condition between bnx2_start_xmit() and bnx2_tx_int() similar to the one in tg3 discovered by Herbert Xu: CPU0 CPU1 bnx2_start_xmit() if (tx_ring_full) { tx_lock bnx2_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in bnx2_tx_int() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if bnx2_tx_int() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made, very much identical to the tg3 fix: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in bnx2_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in bnx2_tx_int() before calling netif_wake_queue(). 4. Add memory barrier to bnx2_tx_avail(). 5. Add bp->tx_wake_thresh which is set to half the tx ring size. 6. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-16Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Greg Kroah-Hartman
2006-08-16[S390] inaccessible PAV alias devices on LPAR.Peter Oberparleiter
In some situations PAV alias devices on LPAR are not accessible. The initialization procedure required to enable access to PAV alias devices has to be performed per storage server subsystem and not only once per storage server. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-16[S390] dasd slab cache alignment.Heiko Carstens
The dasd_page_cache should return page addresses and therefore the cache must be created with an alignment of PAGE_SIZE. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-16Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogGreg Kroah-Hartman
2006-08-15[WATCHDOG] Kconfig typos fix.Matt LaPlante
Three typos in drivers/char/watchdog/Kconfig... Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-08-14[PATCH] dm: BUG/OOPS fixMichal Miroslaw
Fix BUG I tripped on while testing failover and multipathing. BUG shows up on error path in multipath_ctr() when parse_priority_group() fails after returning at least once without error. The fix is to initialize m->ti early - just after alloc()ing it. BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c027c3d2 *pde = 00000000 Oops: 0000 [#3] Modules linked in: qla2xxx ext3 jbd mbcache sg ide_cd cdrom floppy CPU: 0 EIP: 0060:[<c027c3d2>] Not tainted VLI EFLAGS: 00010202 (2.6.17.3 #1) EIP is at dm_put_device+0xf/0x3b eax: 00000001 ebx: ee4fcac0 ecx: 00000000 edx: ee4fcac0 esi: ee4fc4e0 edi: ee4fc4e0 ebp: 00000000 esp: c5db3e78 ds: 007b es: 007b ss: 0068 Process multipathd (pid: 15912, threadinfo=c5db2000 task=ef485a90) Stack: ec4eda40 c02816bd ee4fc4c0 00000000 f7e89498 f883e0bc c02816f6 f7e89480 f7e8948c c0281801 ffffffea f7e89480 f883e080 c0281ffe 00000001 00000000 00000004 dfe9cab8 f7a693c0 f883e080 f883e0c0 ca4b99c0 c027c6ee 01400000 Call Trace: <c02816bd> free_pgpaths+0x31/0x45 <c02816f6> free_priority_group+0x25/0x2e <c0281801> free_multipath+0x35/0x67 <c0281ffe> multipath_ctr+0x123/0x12d <c027c6ee> dm_table_add_target+0x11e/0x18b <c027e5b4> populate_table+0x8a/0xaf <c027e62b> table_load+0x52/0xf9 <c027ec23> ctl_ioctl+0xca/0xfc <c027e5d9> table_load+0x0/0xf9 <c0152146> do_ioctl+0x3e/0x43 <c0152360> vfs_ioctl+0x16c/0x178 <c01523b4> sys_ioctl+0x48/0x60 <c01029b3> syscall_call+0x7/0xb Code: 97 f0 00 00 00 89 c1 83 c9 01 80 e2 01 0f 44 c1 88 43 14 8b 04 24 59 5b 5e 5f 5d c3 53 89 c1 89 d3 ff 4a 08 0f 94 c0 84 c0 74 2a <8b> 01 8b 10 89 d8 e8 f6 fb ff ff 8b 03 8b 53 04 89 50 04 89 02 EIP: [<c027c3d2>] dm_put_device+0xf/0x3b SS:ESP 0068:c5db3e78 Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Acked-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-14[PATCH] add imacfb documentation and detectionEdgar Hucek
Add basic Machine detection to imacfb and some Ducumentation bits for imacfb. Signed-off-by: Edgar Hucek <hostmaster@ed-soft.at> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-14libata: Make sure drivers/ata is a separate Kconfig menuJeff Garzik
Noticed by Rafael J. Wysocki Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14[libata] ata_piix: add missing kfree()Jeff Garzik
Noticed by Andrew Morton. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14libata: Separate libata.ko build from individual driver buildsJeff Garzik
Since some SAS drivers need libata, we can no longer use the rule that auto-builds libata.ko as needed. We must instead depend on Kconfig to determine when to build the library kernel module. Noticed by Brian King @ IBM. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14libata: Remove SCSI_ prefix from Kconfig symbolsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14[PATCH] libata: Add CompactFlash supportAlan Cox
The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-11USB: usbtest.c: unsigned retval makes ctrl_out return 0 in case of errorOrjan Friberg
In my quest to try and figure out why test 14 (control write) doesn't work with my EZ-USB board, I noticed that sometimes testusb reported no error even though the kernel log complained "byte 0 is 0 not 2" etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: ftdi_sio driver - new PIDsJonathan Davies
Signed-off-by: Jonathan Davies <jjd27@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: Additional PID for SHARP W-ZERO3Norihiko Tomiyama
I write a patch for ipaq.c. Would you like to add upstream tree ? This patch enables a support of "SHARP W-ZERO3(WS004SH)" and "SHARP W-ZERO3[es](WS007SH)". From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: appletouch: fix atp_disconnectJohannes Berg
appletouch uses urb->transfer_dma after having freed the urb, this shows up only if the system is compiled with slab debugging. This patch fixes it by reordering the free calls. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: removed a unbalanced #endif from ohci-au1xxx.cYoichi Yuasa
This patch has removed a unbalanced #endif from ohci-au1xxx.c . Please apply before 2.6.18 release. Error message was: In file included from drivers/usb/host/ohci-hcd.c:909: drivers/usb/host/ohci-au1xxx.c:113:2: #endif without #if Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: unusual_devs entry for A-VOX WSX-300ER MP3 playerDavid Kuehling
This patch (as763) adds an unusual_devs entry for the A-VOX WSX-300ER MP3 player. From: David Kuehling <dvdkhlng@gmx.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11PCI: remove dead HOTPLUG_PCI_SHPC_PHPRM_LEGACY option.Dave Jones
Nothing in the tree references this config option. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11pciehp: make pciehp build for powerpcKristen Carlson Accardi
Make pciehp build on powerpc Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-10Merge gregkh@master.kernel.org:/home/rmk/linux-2.6-mmcGreg Kroah-Hartman
2006-08-10Merge gregkh@master.kernel.org:/home/rmk/linux-2.6-armGreg Kroah-Hartman
2006-08-10[S390] dasd calls kzalloc while holding a spinlock.Horst Hummel
The dasd function dasd_set_uid calls kzalloc while holding the dasd_devmap_lock. Rearrange the code to do the memory allocation outside the lock. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-10Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-10[PATCH] libata: PHY reset requires writing 0x4 to SControlMartin Hicks
Hi, Reading the Intel VSC and AHCI it seems like writing 0x302 is incorrect. The only valid values are 4, 1 and 0. Writing 4 disables the PHY. Signed-off-by: Martin Hicks <mort@bork.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10Move libata to drivers/ata.Jeff Garzik
2006-08-10Merge branch 'tj-upstream-pci_register_driver' of ↵Jeff Garzik
git://htj.dyndns.org/libata-tj into upstream
2006-08-10Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-10[PATCH] libata: Use ATA_FLAG_PIO_POLLING for pdc_admaAlbert Lee
pdc_adma was overlooked and broken by the irq-pio patch: Only HSM_ST_LAST interrupts should be delivered to this LLDD. Adding ATA_FLAG_PIO_POLLING to pdc_adma fixes the problem (temporarily), before we convert the irq handler of pdc_adma to handle all interrupts. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10Merge branch 'sii-m15w' into upstreamJeff Garzik
2006-08-10[PATCH] libata: replace pci_module_init() with pci_register_driver()Pavel Roskin
Replace pci_module_init() with pci_register_driver(). Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10[PATCH] libata: kill unused hard_port_no and legacy_modeTejun Heo
Kill unused probe_ent/ap->hard_port_no and probe_ent->legacy_mode. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10[PATCH] libata: replace ap->hard_port_no with ap->port_noTejun Heo
Replace ap->hard_port_no with ap->port_no. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10[PATCH] libata: use dummy port for stolen legacy portsTejun Heo
Use dummy port for stolen legacy ports. This makes ap->port_no always equal ap->hard_port_no. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10[PATCH] libata: implement dummy portTejun Heo
Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 02:43:57 +0000