aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-11-05[PATCH] bnx2: add 5708 supportMichael Chan
Add 5708 copper and serdes basic support, including 2.5 Gbps support on 5708 serdes. SPEED_2500 is also added to ethtool.h Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] prism54: Remove redundant assignmentDaniel Drake
The last patch I sent in ("prism54: Free skb after disabling interrupts") included a redundant NULL assignment. Thanks to Herbert Xu for pointing it out. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] drivers/net/hamradio/dmascc.c: remove dmascc_setup()Adrian Bunk
It seems dmascc_setup() is a leftover time before dmascc_init() was there. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] drivers/net/e1000/: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make needlessly global code static - #if 0 the following unused global functions: - e1000_hw.c: e1000_mc_addr_list_update - e1000_hw.c: e1000_read_reg_io - e1000_hw.c: e1000_enable_pciex_master Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05[PATCH] drivers/net/ixgb/: make some code staticAdrian Bunk
This patch makes some needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-11-05[PATCH] phy address mask support for generic phy layerMatt Porter
Adds a phy_mask field to struct mii_bus and uses it. This field indicates each phy address to be ignored when probing the mdio bus. This support is needed for the fs_enet and ibm_emac drivers to be converted to the generic phy layer among other drivers. Many systems lock up on probing certain phy addresses or probing doesn't return 0xffff when nothing is found at the address. A new driver I'm working on also makes use of this mask. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05[PATCH] pcnet32: Prevent hang with 79c976Don Fry
Some boards using the 79c976 pcnet32 chip will hang the system if the ethtool --register-dump is performed with the device operational. The request to read bcr30 is retried by the PCI device infinitely without returning data, hanging the system. Tested ia32 and ppc64. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05[PATCH] pcnet32: AT2700/2701 and Bugzilla 2699 & 4551Don Fry
This patch is a better fix for Allied Telesyn 2700/2701 FX boards than the change made in early January this year. It allows the user to select the speed/duplex via module_param, but if no selection is made, forces the speed to 100 FD. It fixes both Bugzilla bugs 2669 and 4551. Tested ia32 and ppc64 by myself, and by the originator of bug 2669. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05[PATCH] pcnet32: show name of failing deviceDon Fry
Display the name eth%d or pci_name() of device which fails to allocate memory. When changing ring size via ethtool, it also releases the lock before returning on error. Added comment that the caller of pcnet32_alloc_ring must call pcnet32_free_ring on error, to avoid leak. Tested ia32 by forcing allocation errors. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05[PATCH] S2io: Multi buffer mode supportAnanda Raju
Hi, This patch provides dynamic two buffer-mode and 3 buffer-mode options. Previously 2 buffer-mode was compilation option. Now with this patch applied one can load driver in 2 buffer-mode with module-load parameter ie. #insmod s2io.ko rx_ring_mode=2 This patch also provides 3 buffer-mode which provides header separation functionality. In 3 buffer-mode skb->data will have L2/L3/L4 headers and "skb_shinfo(skb)->frag_list->data" will have have L4 payload. one can load driver in 3 buffer-mode with same above module-load parameter ie. #insmod s2io.ko rx_ring_mode=3 Please review the patch. Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05[PATCH] drivers/net/wireless/airo.c unsigned comparasonGabriel A. Devenyi
fid is declared as a u32 (unsigned int), and then a few lines later, it is checked for a value < 0, which is clearly useless. In the two locations this function is used, in one it is *explicitly* given a negative number, which would be ignored with the current definition. Thanks to LinuxICC (http://linuxicc.sf.net). Signed-off-by: Gabriel A. Devenyi <ace@staticwave.ca> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-05Merge branch 'master'Jeff Garzik
2005-11-05[libata] restore sg on DMA mapping failureTejun Heo
2005-11-05Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds
2005-11-05Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds
2005-11-05[SCSI] sd: Fix refcountingAlan Stern
Currently the driver takes a reference only for requests coming by way of the gendisk, not for requests coming by way of the struct device or struct scsi_device. Such requests can arrive in the rescan, flush, and shutdown pathways. The patch also makes the scsi_disk keep a reference to the underlying scsi_device, and it erases the scsi_device's pointer to the scsi_disk when the scsi_device is removed (since the pointer should no longer be used). This resolves Bugzilla entry #5237. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-05[MMC] Use controller id instead of driver name for printksPierre Ossman
The printks that aren't for debugging should use the name of the controller, not the driver name. Multiple MMC controllers aren't that common today, but this is the right way to do things. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-05[MMC] Fix chip config in wbsdPierre Ossman
There is a broken if clause in the wbsd driver that can cause the driver to try and configure the chip even though none is found. This results in i/o on invalid ports. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-04Fix ips.c compileJames Bottomley
It looks like one of the ips patches was missing a closing brace in a function Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-04Merge by HandJames Bottomley
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and scsi_transport_fc.h Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-04[libata] ATAPI pad allocation fixes/cleanupJeff Garzik
Use ata_pad_{alloc,free} in two drivers, to factor out common code. Add ata_pad_{alloc,free} to two other drivers, which needed the padding but had not been updated.
2005-11-04Merge branch 'master'Jeff Garzik
2005-11-04[PATCH] nvidiafb: Geforce 7800 series support addedCalin A. Culianu
This adds support for the Nvidia Geforce 7800 series of cards to the nvidiafb framebuffer driver. All it does is add the PCI device id for the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work on these cards. I also added the relevant PCI device ids to linux/pci_ids.h I tested it on my 7800 GTX here and it works like a charm. I now can get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text mode to make your eyes BLEED. ;) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04Merge branch 'srp' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2005-11-04Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2005-11-04Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2005-11-04[USB]: Make early handoff a final fixup instead of a header one.David S. Miller
At header fixup time, it is not yet legal to ioremap() PCI device registers, yet that is what this quirk code needs to do. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-04[MMC] Response to write commands is R1 nor R1bRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-04Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-11-04[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfromRussell King
No longer maintained
2005-11-04[PATCH] ARM: Reverted 2921/1: Support for the RTC / nvram on the Comdial MP1000Russell King
No longer maintained
2005-11-04[PATCH] ARM: Reverted 2919/1: CS8900A ethernet driver modifications for the ↵Russell King
Comdial MP1000 No longer maintained
2005-11-03[IB] mthca: check P_Key index in modify QPJack Morgenstein
Make sure that the P_Key index passed into mthca_modify_qp() is within the device's P_Key table. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-03[SERIAL] 8250_early.c passing 0 instead of NULLBen Dooks
Fix sparse warning about passing `0` to simple_strtoul() Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-03[IB] umad: fix hot remove of IB devicesRoland Dreier
Fix hotplug of devices for ib_umad module: when a device goes away, kill off all MAD agents for open files associated with that device, and make sure that the device is not touched again after ib_umad returns from its remove_one function. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[IB] mthca: fix format of FW versionRoland Dreier
Mellanox has decided that the components of the firmware version are really meant to be displayed in decimal, e.g. 0x000400070190 is version 4.7.400. Change the format we use from "%x.%x.%x" to "%d.%d.%d" to match this convention. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[IPoIB] don't compile debug code if debugging isn't enabledRoland Dreier
Don't build ipoib_mcast_iter_ functions if CONFIG_INFINIBAND_IPOIB_DEBUG is not enabled -- their only callers will not be built either. Also move the prototype for ipoib_open() to ipoib.h to fix a sparse warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-11-02IB: Add SCSI RDMA Protocol (SRP) initiatorRoland Dreier
Add an InfiniBand SCSI RDMA Protocol (SRP) initiator. This driver is used to talk talk to InfiniBand SRP targets (storage devices). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[IPoIB] remove unneeded initializations to 0Roland Dreier
Shrink our source and .text a little by removing a few assignments of NULL and 0 to memory that is already cleared as part of the allocation. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02Merge git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
2005-11-02[IB] kzalloc() conversionsRoland Dreier
Replace kmalloc()+memset(,0,) with kzalloc(), for a net savings of 35 source lines and about 500 bytes of text. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[ARM] AMBA CLCD driver can drive PL110 and PL111 primecellsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02Merge Paulus' treeStephen Rothwell
2005-11-01[PATCH] blk: fix dangling pointer access in __elv_add_requestTejun Heo
cfq's add_req_fn callback may invoke q->request_fn directly and depending on low-level driver used and timing, a queued request may be finished & deallocated before add_req_fn callback returns. So, __elv_add_request must not access rq after it's passed to add_req_fn callback. This patch moves rq_mergeable test above add_req_fn(). This may result in q->last_merge pointing to REQ_NOMERGE request if add_req_fn callback sets it but as RQ_NOMERGE is checked again when blk layer actually tries to merge requests, this does not cause any problem. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[PATCH] ibmveth fix panic in initial replenish cycleSantiago Leon
This patch fixes a panic in the current tree caused by a race condition between the initial replenish cycle and the rx processing of the first packets trying to replenish the buffers. Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[PATCH] missing platform_device.h includesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01Merge master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds
Manual fixups for some clashes due to re-indenting.
2005-11-01[PATCH] tlclk build fixAndrew Morton
drivers/char/tlclk.c: In function `tlclk_init': drivers/char/tlclk.c:775: warning: implicit declaration of function `platform_device_register_simple' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 02:17:09 +0000