aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-21dm crypt: add mergeMilan Broz
This patch implements biovec merge function for crypt target. If the underlying device has merge function defined, call it. If not, keep precomputed value. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm table: remove merge_bvec sector restrictionMilan Broz
Remove max_sector restriction - merge function replaced it. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm: linear add mergeMilan Broz
This patch implements biovec merge function for linear target. If the underlying device has merge function defined, call it. If not, keep precomputed value. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm: introduce merge_bvec_fnMilan Broz
Introduce a bvec merge function for device mapper devices for dynamic size restrictions. This code ensures the requested biovec lies within a single target and then calls a target-specific function to check against any constraints imposed by underlying devices. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm snapshot: use per device mempoolsMikulas Patocka
Change snapshot per-module mempool to per-device mempool. Per-module mempools could cause a deadlock if multiple snapshot devices are stacked above each other. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm snapshot: fix race during exception creationMikulas Patocka
Fix a race condition that returns incorrect data when a write causes an exception to be allocated whilst a read is still in flight. The race condition happens as follows: * A read to non-reallocated sector in the snapshot is submitted so that the read is routed to the original device. * A write to the original device is submitted. The write causes an exception that reallocates the block. The write proceeds. * The original read is dequeued and reads the wrong data. This race can be triggered with CFQ scheduler and one thread writing and multiple threads reading simultaneously. (This patch relies upon the earlier dm-kcopyd-per-device.patch to avoid a deadlock.) Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm snapshot: track snapshot readsMikulas Patocka
Whenever a snapshot read gets mapped through to the origin, track it in a per-snapshot hash table indexed by chunk number, using memory allocated from a new per-snapshot mempool. We need to track these reads to avoid race conditions which will be fixed by patches that follow. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm mpath: fix test for reinstate_pathAlasdair G Kergon
Fix test for reinstate_path method before attempting to use it. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Julia Lawall <julia@diku.dk>
2008-07-21dm mpath: return parameter errorMikulas Patocka
Return a specific error message if there are an invalid number of multipath arguments. This invalid command returns an "Unknown error" because the ti->error field is not set dmsetup create --table '0 2 multipath 0 0 1 1 round-robin 0 1 1 /dev/sdh' mpath0 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm io: remove struct paddingRichard Kennedy
Rearrange struct dm_io. Shrinks size from 40 -> 32 allowing more objects/slab. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm log: make dm_dirty_log init and exit staticAdrian Bunk
dm_dirty_log_{init,exit}() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21dm mpath: free path selector on invalid argsMikulas Patocka
Free path selector if the arguments are invalid. This command (note that it is invalid) causes reference leak on module "dm_round_robin" and prevents the module from being removed. dmsetup create --table '0 2 multipath 0 0 1 1 round-robin /dev/sdh' mpath0 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21Merge branch 'linus' into x86/urgentIngo Molnar
2008-07-21md: Protect access to mddev->disks list using RCUNeilBrown
All modifications and most access to the mddev->disks list are made under the reconfig_mutex lock. However there are three places where the list is walked without any locking. If a reconfig happens at this time, havoc (and oops) can ensue. So use RCU to protect these accesses: - wrap them in rcu_read_{,un}lock() - use list_for_each_entry_rcu - add to the list with list_add_rcu - delete from the list with list_del_rcu - delay the 'free' with call_rcu rather than schedule_work Note that export_rdev did a list_del_init on this list. In almost all cases the entry was not in the list anymore so it was a no-op and so safe. It is no longer safe as after list_del_rcu we may not touch the list_head. An audit shows that export_rdev is called: - after unbind_rdev_from_array, in which case the delete has already been done, - after bind_rdev_to_array fails, in which case the delete isn't needed. - before the device has been put on a list at all (e.g. in add_new_disk where reading the superblock fails). - and in autorun devices after a failure when the device is on a different list. So remove the list_del_init call from export_rdev, and add it back immediately before the called to export_rdev for that last case. Note also that ->same_set is sometimes used for lists other than mddev->list (e.g. candidates). In these cases rcu is not needed. Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21md: only count actual openers as access which prevent a 'stop'NeilBrown
Open isn't the only thing that increments ->active. e.g. reading /proc/mdstat will increment it briefly. So to avoid false positives in testing for concurrent access, introduce a new counter that counts just the number of times the md device it open. Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21md: linear: Make array_size sector-based and rename it to array_sectors.Andre Noll
Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21md: Make mddev->array_size sector-based.Andre Noll
This patch renames the array_size field of struct mddev_s to array_sectors and converts all instances to use units of 512 byte sectors instead of 1k blocks. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into nextDmitry Torokhov
2008-07-21md: Make super_type->rdev_size_change() take sector-based sizes.Andre Noll
Also, change the type of the size parameter from unsigned long long to sector_t and rename it to num_sectors. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21md: Fix check for overlapping devices.Andre Noll
The checks in overlaps() expect all parameters either in block-based or sector-based quantities. However, its single caller passes two rdev->data_offset arguments as well as two rdev->size arguments, the former being sector counts while the latter are measured in 1K blocks. This could cause rdev_size_store() to accept an invalid size from user space. Fix it by passing only sector-based quantities to overlaps(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21md: Tidy up rdev_size_store a bit:Neil Brown
- used strict_strtoull in place of simple_strtoull - use my_mddev in place of rdev->mddev (they have the same value) and more significantly, - don't adjust mddev->size to fit, rather reject changes which make rdev->size smaller than mddev->size Adjusting mddev->size is a hangover from bind_rdev_to_array which does a similar thing. But it really is a better design to insist that mddev->size is set as required, then the rdev->sizes are set to allow for that. The previous way invites confusion. Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-20Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: gpu: re-order GPU subdirectory vs char for AGP vs DRM startup.
2008-07-20Merge branch 'for-linus' of git://git.o-hand.com/linux-mfdLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: let asic3 use mem resource instead of bus_shift mfd: remove DS1WM register definitions from asic3.h mfd: add ASIC3_CONFIG_GPIO templates mfd: fix the asic3 irq demux code mfd: asic3 should depend on gpiolib mfd: fix asic3 config array initialisation mfd: move asic3 probe functions into __init section mfd: Use uppercase only for asic3 macros and defines mfd: use dev_* macros for asic3 debugging mfd: New asic3 gpio configuration code mfd: asic3 children platform data removal mfd: asic3 gpiolib support
2008-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (277 commits) V4L/DVB (8415): gspca: Infinite loop in i2c_w() of etoms. V4L/DVB (8414): videodev/cx18: fix get_index bug and error-handling lock-ups V4L/DVB (8411): videobuf-dma-contig.c: fix 64-bit build for pre-2.6.24 kernels V4L/DVB (8410): sh_mobile_ceu_camera: fix 64-bit compiler warnings V4L/DVB (8397): video: convert select VIDEO_ZORAN_ZR36060 into depends on V4L/DVB (8396): video: Fix Kbuild dependency for VIDEO_IR_I2C V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2c V4L/DVB (8394): ir-common: CodingStyle fix: move EXPORT_SYMBOL_GPL to their proper places V4L/DVB (8393): media/video: Fix depencencies for VIDEOBUF V4L/DVB (8392): media/Kconfig: Convert V4L1_COMPAT select into "depends on" V4L/DVB (8390): videodev: add comment and remove magic number. V4L/DVB (8389): videodev: simplify get_index() V4L/DVB (8387): Some cosmetic changes V4L/DVB (8381): ov7670: fix compile warnings V4L/DVB (8380): saa7115: use saa7115_auto instead of saa711x as the autodetect driver name. V4L/DVB (8379): saa7127: Make device detection optional V4L/DVB (8378): cx18: move cx18_av_vbi_setup to av-core.c and rename to cx18_av_std_setup V4L/DVB (8377): ivtv/cx18: ensure the default control values are correct V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setup V4L/DVB (8374): gspca: No conflict of 0c45:6011 with the sn9c102 driver. ...
2008-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits) iucv: Fix bad merging. net_sched: Add size table for qdiscs net_sched: Add accessor function for packet length for qdiscs net_sched: Add qdisc_enqueue wrapper highmem: Export totalhigh_pages. ipv6 mcast: Omit redundant address family checks in ip6_mc_source(). net: Use standard structures for generic socket address structures. ipv6 netns: Make several "global" sysctl variables namespace aware. netns: Use net_eq() to compare net-namespaces for optimization. ipv6: remove unused macros from net/ipv6.h ipv6: remove unused parameter from ip6_ra_control tcp: fix kernel panic with listening_get_next tcp: Remove redundant checks when setting eff_sacks tcp: options clean up tcp: Fix MD5 signatures for non-linear skbs sctp: Update sctp global memory limit allocations. sctp: remove unnecessary byteshifting, calculate directly in big-endian sctp: Allow only 1 listening socket with SO_REUSEADDR sctp: Do not leak memory on multiple listen() calls sctp: Support ipv6only AF_INET6 sockets. ...
2008-07-20dio: use dio_match_device() in dio_bus_match()Akinobu Mita
dio_bus_match() can use dio_match_device(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20m68k/Apollo: remove the unused APOLLO_ELPLUS optionGeert Uytterhoeven
Looking at older kernel sources the APOLLO_ELPLUS option was added somewhere during kernel 2.1, but even kernel 2.2.0 does not contain any driver that would be enabled through it... Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20export c2pAdrian Bunk
This patch fixes the following build error: <-- snip --> .. Building modules, stage 2. MODPOST 1203 modules ERROR: "c2p" [drivers/video/amifb.ko] undefined! .. make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20drivers/video/c2p.c: add MODULE_LICENSEAdrian Bunk
This patch adds the missing MODULE_LICENSE("GPL"). Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20atafb: Register Atari-specific video modes with sysfsGeert Uytterhoeven
Register the Atari-specific video modes with sysfs, so you can see them in /sys/class/graphics/fb0/modes and change the video mode by writing to /sys/class/graphics/fb0/mode. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20amifb: Register Amiga-specific video modes with sysfsGeert Uytterhoeven
Register the Amiga-specific video modes with sysfs, so you can see them in /sys/class/graphics/fb0/modes and change the video mode by writing to /sys/class/graphics/fb0/mode. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20zorro: use memory_read_from_bufferakinobu.mita@gmail.com
zorro: use memory_read_from_buffer Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ZORRO: Replace deprecated __initcall with equivalent device_initcall.Robert P. J. Day
ZORRO: Replace deprecated __initcall with equivalent device_initcall. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20m68k: Return -ENODEV if no device is foundGeert Uytterhoeven
According to the tests in do_initcalls(), the proper error code in case no device is found is -ENODEV, not -ENXIO or -EIO. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ariadne: use netstats in net_device structurePaulius Zaleckas
Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20m68k: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Merge branch 'configfs-fixup-ptr-error' of ↵Linus Torvalds
git://oss.oracle.com/git/jlbec/linux-2.6 * 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6: configfs: Allow ->make_item() and ->make_group() to return detailed errors. Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."
2008-07-20APCI: revert another duplicated patchThomas Gleixner
commit d1857056904d5f313f11184fcfa624652ff9620a ("ACPI: don't walk tables if ACPI was disabled") is another superfluous duplicate commit caused by git -> quilt -> git conversion. Revert it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20APCI: revert duplicated patchThomas Gleixner
commit 816c2eda3ce8fa7eb62f22e01e2ec7a3f7d677c0 ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") was merged between 2.6.26-rc8 and -rc9) Due to rebasing the ACPI tree via quilt the same patch got applied again via commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") Revert it, as it is obviously bogus. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Fix strip driver back up for ldisc/tty changesAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20tty: add more tty_port fieldsAlan Cox
Move more bits into the tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20cyclades: use tty_portAlan Cox
Switch cyclades to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20tty: Clean up tiocmsetAlan Cox
Reverse the order of one test and it gets much more readable Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20synclink: use tty_portAlan Cox
Switch the synclink ports to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20stallion: use tty_portAlan Cox
Switch the stallion driver to use the tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20atmel_serial: Fix tty_port breakageHaavard Skinnemoen
The tty pointer has been moved into a tty_port field, so we need to use ->info->port.tty instead of just ->info->tty. Fixes these build errors: David Brownell <david-b@pacbell.net> wrote: > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_ring': > drivers/serial/atmel_serial.c:665: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_dma': > drivers/serial/atmel_serial.c:672: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_startup': > drivers/serial/atmel_serial.c:797: error: 'struct uart_info' has no member named 'tty' > make[2]: *** [drivers/serial/atmel_serial.o] Error 1 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20rocket: use tty_portAlan Cox
Switch the rocketport to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20mxser: use tty_portAlan Cox
Switch mxser to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20moxa: use tty_portAlan Cox
Switch MOXA to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20istallion: use tty_portAlan Cox
Switch istallion to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 18:26:21 +0000