aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-07-09via82cxxx: backport short cables support from pata_via.cBartlomiej Zolnierkiewicz
Backport short cables support from pata_via.c. This patch should allow UDMA > 2 modes on Acer Ferrari 3400. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09sis5513: backport short cables support from pata_sis.cBartlomiej Zolnierkiewicz
Backport short cables support from pata_sis.c. This patch allows UDMA > 2 modes on ASUS A6K. Thanks to testing this patch goes out to Jiri Stavinoha. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09alim15x3: backport short cables support from pata_ali.cBartlomiej Zolnierkiewicz
Backport short cables support from pata_ali.c and while at it cleanup existing cable detection code. This patch should allow UDMA > 2 modes on HP Pavilion N5430 and Fujitsu P2000. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09piix: backport short cables support from ata_piix.cBartlomiej Zolnierkiewicz
Backport short cables support from ata_piix.c. This patch should allow UDMA > 2 modes on: - Acer 5602WLMi - Acer 3682WLMi - Asus W5F - Acer Aspire 2023WLMi Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09ide: add short cables supportBartlomiej Zolnierkiewicz
This patch allows users to override both host and device side cable detection with "ideX=ata66" kernel parameter. Thanks to this it should be now possible to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable instead of 80-pin one. Next patches add automatic detection of some systems using short cables. Changes: * Rename hwif->udma_four to hwif->cbl and make it u8. * Convert all existing users accordingly (use ATA_CBL_* defines while at it). * Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three(). * Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09ide: convert ide_find_best_mode() users to use ide_max_dma_mode()Bartlomiej Zolnierkiewicz
ide-timing.h: * remove handling of DMA modes from ide_find_best_mode() and rename it to ide_find_best_pio_mode() * drop no longer needed "map" argument from ide_find_best_pio_mode() and delete needless ->id check * remove no longer needed XFER_SWDMA and XFER_UDMA* defines au1xxx-ide.c: * use ide_max_dma_mode() instead of ide_find_best_mode() * remove needless CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA #ifdef amd74xx.c: * store UDMA masks in amd_ide_chip[] and while at it make "base" field to be u8 instead of unsigned long * convert the driver to use UDMA masks from amd_ide_chip[] * use ide_max_dma_mode() and ide_find_best_pio_mode() instead of ide_find_best_mode() * delete stale comment from amd74xx_ide_dma_check() * remove no longer needed AMD_UDMA* defines via82cxxx.c: * remove unused DISPLAY_VIA_TIMINGS define * store UDMA masks in via_isa_bridges[] and while at it make "flags" field to be u8 instead of u16 * convert the driver to use UDMA masks from via_isa_bridges[] * use ide_max_dma_mode() and ide_find_best_pio_mode() instead of ide_find_best_mode() * remove no longer needed VIA_UDMA* defines pmac.c: * use ide_max_dma_mode() instead of ide_find_best_mode() There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2007-07-09ide: fix pre-EIDE SWDMA supportBartlomiej Zolnierkiewicz
If the word 62 is not defined use the word 52 to get SWDMA mask in ide_get_mode_mask(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09drivers/ide/legacy/hd.c: Array size calculation using sizeof replaced with ↵Andi Drebes
ARRAY_SIZE This patch replaces an array size calculation in drivers/ide/legacy/hd.c that was done using sizeof with the ARRAY_SIZE macro. Tested by compilation on an i386 box using "allyesconfig". Diffed against Linus' git-tree. Signed-off-by: Andi Drebes <lists-receive@programmierforen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: remove content related to dead CONFIG_BLK_DEV_MAC_MEDIABAY config variableRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: remove references to the non-existent CONFIG_SCSI_EATA_DMARobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide-cd: replace C code with call to ARRAY_SIZE() macroRobert P. J. Day
Delete the unnecessary macro ARY_LEN and use ARRAY_SIZE directly. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide_in_drive_list(): "ALL" is not a wildcard anymoreJunio C Hamano
This removes the support to treat "ALL" as a wildcard for firmware revision. This is made a separate patch, as it will break out-of-tree ide drivers that feed its own table that uses "ALL" as the wildcard to ide_in_drive_list(). Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide_in_drive_list(): accept NULL as the wildcard for firmware revisionJunio C Hamano
Earlier, the matching of (model,rev) in ide-dma black/white list handling was to consider "ALL" in the table to match any revision. This makes NULL to be also an accepted wildcard, and changes the entries of tables in ide-dma.c to use NULL. The code still accepts "ALL" as the wildcard, in order to keep any out-of-tree ide driver that feeds its own table that uses "ALL" as the wildcard to ide_in_drive_list() function from breaking. Signed-off-by: Junio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09aec62xx: kill speedproc() method wrapper (take 2)Sergei Shtylyov
There's no reason to have the speedproc() method wrapper for the two quite different chip families, so just get rid of it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: use mutex instead of ide_setting_sem semaphore in IDE driverMatthias Kaehlcke
The IDE driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> --
2007-07-09aec62xx: remove init_dma() method (take 2)Sergei Shtylyov
Get rid of the init_dma() method (which had no particular reason to exist) by folding it into the init_hwif() method. While at it, also perform some cleanup in the latter method: - get rid of the useless clearing of hwif->autodma; - fold the serialization code into one 'if' statement; - fold setting the drives' 'autotune' and 'autodma' fields into the single statements... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09aec62xx: rework init_setup_aec6x80()Sergei Shtylyov
Rework init_setup_aec6x80() so that it won't rewrite the constant name strings anymore -- in order to do this: - in aec62xx_init_one(), pass a local copy of 'struct pci_device_id' down the call chain; - change the names for in aec62xx_chipsets[] to default to AEC-6280[R]; - override the 'name' field in init_setup_aec6x80() only if bit 4 of the DMA status register is set. While at it, also change the 'udma_mask' field for AEC-6x80R chips in this function and remove the code doing the same from the init_hwif() method... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09cmd64x: init. code cleanupSergei Shtylyov
Fix two minor issues with PCI0646 chip reporting in the init_chipset() method: "IRQ workaround enabled" message printed out not only for revision 0x01 and "CMD646: chipset revision" printed twice (by IDE core and the driver itself). Also, remove empty/pointless switch cases for the chips other than PCI0646, duplicate write to the MRDMODE register when enabling interrupts and MEMORY READ LINE cycles, and needless/misplaced initialization of the timing registers in this method. Switch to reading only the PCI revision ID register itself, not the whole 32 bits at its address in init_chipset() and init_hwif() methods; in addition, get rid of the useless clearing of hwif->autodma and perform some cosmetic style changes in the latter method. Refactor ata66_cmd64x() by moving all the code into the 'switch' statement, renaming/adding variables, and fixing the coding style. While at it, finally get rid of the meaningless aliasing register #define's... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09hpt366: simplify UltraDMA filtering (take 4)Sergei Shtylyov
Simplify UltraDMA mode filtering in the driver: - make use of the newly introduced 'udma_mask' field of 'ide_pci_device_t' to set the correct hwif->ultra_mask, modifying init_setup_hpt366() to select the correct mask based on the chip revision; - replace 'max_mode' field of the 'struct hpt_info' with 'max_ultra' specifying the maximum UltraDMA mode allowed; - rewrite hpt3xx_udma_filter() to differ the filters based on the 'chip_type' field, and only use it for HPT366 and HPT370[A] where it's really necessary. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: use mutex instead of ide_cfg_sem semaphore in IDE driverMatthias Kaehlcke
The IDE driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: make void and rename ide_dma_timeout() methodSergei Shtylyov
Since ide_dma_timeout() method's result is discarded, make it return 'void'. While at it, drop 'ide_' from the method's name, drop the '__' prefix from the default method's name, and do some cleanups in this method driver-wise: - in ide-dma.c, au1xxx-ide.c, and pdc202xx_old.c, define/use 'hwif' variable; - in au1xxx-ide.c, get rid of commented out printk(); - in sl82c105.c, get rid of unnecessary variables. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09ide: make void and rename ide_dma_lostirq() methodSergei Shtylyov
Since ide_dma_lostirq() method's result is discarded, make it return 'void'. While at it, rename the method to dma_lost_irq(), drop the '__' prefix from the default method's name, and do some cleanups in this method driver-wise: - in aec62xx.c, rename the method in accordance with other drivers, and get rid of unnecessary variables there; - in pdc202xx_old.c, define/use 'hwif' variable; - in sgiioc4.c, rearrange the code to call the resetproc() method directly. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-09serverworks: always tune CSB6Bartlomiej Zolnierkiewicz
Switch the driver to always program DMA/PIO timings and set device transfer mode instead of trusting BIOS on CSB6 controllers (libata pata_serverworks.c driver is also doing things this way and there were no problems reported so far). While doing conversion I noticed that the old code had many issues: * the code was assuming that hwif->dma_status is always valid (which obviously isn't true if hwif->dma_base == NULL) * value of "(ultra_timing >> (4*unit)) & ~(0xF0)" expression wasn't checked to fit into udma_modes[5] * code validating DMA timings didn't validate corresponding PIO timings * extra CSB5 PIO register wasn't validated et all * hwif->ide_dma_off_quietly() is always called before ide_set_dma() (which in turn calls hwif->speedproc() method - svwks_tune_chipset() in this case) so the code depending on DMA capable bit of DMA status to be set was never executed (=> the code was never validating DMA timings despite actually enabling DMA if the PIO timings were OK!) * on resume driver dependend entirely on BIOS to restore timings and set transfer mode on the device While at it: There is no need to read PIO/MWDMA timings now so don't do it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2007-07-09Merge branches 'debug-module-param' and 'upstream' into for-linusJiri Kosina
2007-07-09HID: handle cases of volume knobs generating relative valuesJiri Kosina
There are some devices (for example Dell Multimedia Keyboard SK-8135) that have a volume control knob which generates relative events instead of absolute. hid-input maps them to ABS_VOLUME. HUT pages don't restrict volume to absolute values. Adding REL_VOLUME doesn't seem feasible, nothing knows how to handle it. This patch translates relative ABS_VOLUME events into appropriate number of series of VOLUME_UP or VOLUME_DOWN events respectively, so that userspace sees the correct values in the end. kernel.org bugzilla 5233 Reported-by: Jochen Eisinger <jochen@penguin-breeder.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: Logitech keyboard 0xc311 needs reset leds quirkJiri Kosina
The keyboard 0x046d/0xc311 needs reset leds quirk Tested-by: Antonino Ingargiola <tritemio@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: support for logitech cordless desktop LX500 special mappingRyo Dairiki
This keyboard has wireless mouse which has left, middle, right buttons and 2-dimensional scrolling wheel. Unfornetuly, this wheel reports side scrolling events and 11 or 12 button events at the same time. I've wrote a patch to fix this mapping. I'm not sure if this mapping is proper for buttons, because , for example, there is no entry for "burn cd" in input.h. The patch also supress 11 and 12 button events from mouse when you scroll the wheel left and right. With this patch, only side scrolling events are reported. (This mouse has only 4 buttons and 2D wheel. There is no such buttons like 11 and 12.) Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: fix autocentering of PID devicesDiogo Kastrup
When setting the autocentering of PID devices, PID_DIRECTION_ENABLE is not being explicitely set to 1. This results in autocentering working only on the vertical axis when this field is preset to 0. Fix that by setting it explicitely to 1 when preparing the set_effect report for autocentering spring effect. Signed-off-by: Diogo Kastrup <dk@bighost.com.br> Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: separate quirks for report descriptor fixupJiri Kosina
Lately there have been quite a lot of bug reports against broken devices which require us to fix their report descriptor in the runtime, before it is passed to the HID parser. Those devices have eaten quite an amount of our quirks space, which isn't particularly necessary - the quirks are not needed after the report descriptor is parsed, and they just consume bits. Therefore this patch separates the quirks for report descriptor fixup, and moves their handling into separate code. The quirks are then forgotten as soon as the report descriptor has been parsed. Module parameter 'rdesc_quirks' is introduced to be able to modify these quirks in runtime in a similar way to 'quirks' parameter for ordinary HID quirks. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: Add NOGET quirk for all NCR devicesJiri Kosina
Devices manufactured by NCR have userspace hiddev-based drivers, which do all the necessary device querying by themselves. The devices must not be queried directly by the generic HID driver, as reported by NCR engineers. Cc: Petr Ostadal <postadal@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: support for Petalynx Maxter remote controlJiri Kosina
Petalynx Maxter remote control [1] 0x18b1/0x0037 emits 0xfa and 0xfc from consumer page (reserved in HUT 1.12) for back and more keys. It also emits a few usages from LOGIVENDOR page, which need adding. Also, this device has broken report descriptor - the reported maximum is too low - it doesn't contain the range for 'back' and 'more' keys, so we need to bump it up before the report descriptor is being parsed. Besides all this, it also requires NOGET quirk. This patch does so. [1] http://www.elmak.pl/index.php?option=com_phpshop&page=shop.browse&category_id=14&ext=opis&lang=en Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: fix mismatch between hid-input HUT find/search mapping and the HUTHans de Goede
When comparing usb vs ps2 / testing the keycodes generated for the easy access keys on my trust (microsoft compatible) keyboard. I noticed the search key generated the keycode for find when connected through USB. This lead me to check the consumer page mappings in hid-input.c . And it turns out the the mapping for ID 0x221 deviates from the HUT standard document: http://www.usb.org/developers/devclass_docs/Hut1_12.pdf Currently it is incorrectly mapped to find, whereas it should be mapped to search. I also added missing bindings for ID 0x21f, the real find and for 0x222, goto. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: support for Gameron dual psx adaptorJulien Eyries
This patch provides support for the Gameron dual psx adaptor. The modification is to add the quirk HID_QUIRK_MULTI_INPUT for this specific USB device. Signed-off-by: Julien Eyries <jeyries@yahoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09USB HID: avoid flush_scheduled_work()Alan Stern
This patch (as914) replaces a call to flush_scheduled_work() with cancel_work_sync(), in order to help avoid potential deadlocks. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: Use menuconfig objectsJan Engelhardt
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: force hid-input for Microsoft SideWinder GameVoice deviceJiri Kosina
Microsoft SideWinder GameVoice driver is a trivial device with a few buttons (0x09 HID usage) and an audio connector, which just forwards the audio input into oridinary sound card present in the computer. Despite this fact, the only interface of this device reports itself as a Telephony/Headset type of HID device. This is apparently incorrect - the device itself doesn't provide any audio/telephony functionality. This is achieved in userland application which only needs to receive the button events from the HID driver. This patch establishes a new quirk which forces hid-input to claim a device it will otherwise leave untouched. Reported-by: Tomas Carnecky <tom@dbservice.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: input mapping for Chicony KU-0418 tactical padJiri Kosina
Chicony KU-0418 (aka Saitek PZ08AU gaming keyboard) has a separate "tactical pad" with 11 non-functional buttons - they generate usage codes from 0xff00 (MSVENDOR) usage page. Special case handling for this keyboard added, so no later clash with MSVENDOR mappings is going to occur. Pointed out in bugzilla #7352 Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: make debugging output runtime-configurableJiri Kosina
There have been many reports recently about broken HID devices, the diagnosis of which required users to recompile their kernels in order to be able to provide debugging output needed for coding a quirk for a particular device. This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it possible to control debugging output produced by HID code by supplying 'debug=1' module parameter. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-08Ethernet driver for EISA only SNI RM200/RM400 machinesThomas Bogendoerfer
Changes to last version: - spelling fix - cleaned up probe code Thomas. Ethernet driver for EISA only SNI RM200/RM400 machines Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08Extract chip specific code out of lasi_82596.cThomas Bogendoerfer
Changes to last version: - use netdev_alloc_skb - make init_rx_bufs just fail and not panic, if skb alloc fails - don/t free_irq, if request_irq failed Thomas. Extracted chip specific code out of lasi_82596.c and placed into a lib82596.c to make it usable for other 82596 drivers Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08ehea: Whitespace cleanupJan-Bernd Themann
This patch fixes several whitespace issues. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08pasemi_mac: Fix TX interrupt thresholdOlof Johansson
It was mistakenly set to interrupt on the second packet instead of first, causing some interesting latency behaviour. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08spidernet: Replace literal with constLinas Vepstas
Replace literal with const; add bit definitions. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08r8169: perform RX config change after mac filteringFrancois Romieu
It does not really make sense to update the RX config register before the mac filtering registers. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08r8169: mac address change supportFrancois Romieu
Merged from Realtek's r8169-6.001 driver. I have added some locking to protect against the arp monitoring timer in the bonding driver. Accessing the configuration registers is otherwise performed under RTNL locking. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08r8169: display some extra debug information during startupFrancois Romieu
It does not cost much and it will ease the identification of (so far) unknown devices. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08r8169: add endianess annotations to [RT]xDescRolf Eike Beer
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08r8169: align the IP header when there is no DMA constraintFrancois Romieu
Align the IP header when the chipset can DMA at any location (plain 0x8169). Otherwise (0x8136/0x8168) obey the constraint imposed by the hardware. This patch complements the previous alignment rework done for copybreak. Original idea from Philip Craig <philipc@snapgear.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Philip Craig <philipc@snapgear.com> Cc: Mike Isely <isely@pobox.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08r8169: add bit description for the TxPoll registerFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08r8169: cleanupFrancois Romieu
No functionnal change: - trim the old history log - whitespace/indent/case police - unsigned int where signedness does not matter - removal of obsolete assert - needless cast from void * (dev_instance) - remove dead code once related to power management - use netdev_alloc_skb. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-07 21:23:58 +0000