aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-01-09V4L/DVB (3310): DViCO Dual Digital DVB-T / USB bluebird updatesChris Pascoe
- Add support for the USB portion of the DViCO Dual Digital board. Patch correct "warm" USB IDs into bluebird firmware before download. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3309): SAA7134: GPIO IRQ improvementsPeter Missel
- Saa7134-core.c saa7134_irq(): Separate GPIO16 and GPIO18 handling. Call IR-remote-GPIO handler only if the GPIO IRQ is "owned" by it. Added infrastructure to branch out to a future I2C-IR IRQ handler. saa7134-core.c saa7134_hwinit2(): Enable only the one GPIO pin and edge to trigger an IRQ that is wired as keyup/keydown mask. IRQ will only be generated for an actual key-down event. saa7134-input.c flyvideo_codes[]: Replace numpad keys with normal ones. Put meaning to mystery keys. Change some key definitions to have their functions match their labels better. Fix typos. saa7134-input.c flydvb_codes[]: Added new table for the larger remote that comes with the LifeView FlyDVB series. saa7134-input.c build_key(): In IRQ mode, signal key-down and then key-up straight in one go. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09[PATCH] drivers/*rest*: Replace pci_module_init() with pci_register_driver()Richard Knutsson
Replace obsolete pci_module_init() with pci_register_driver(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] drivers/block: Replace pci_module_init() with pci_register_driver()Richard Knutsson
Replace obsolete pci_module_init() with pci_register_driver(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI: drivers/pci: some cleanupsAdrian Bunk
This patch contains the following cleanups: - hotplug/pciehp_core.c: make the needlessly global hpdriver_context static - #if 0 the following unused functions: - pci.c: pci_bus_max_busnr() - pci.c: pci_max_busnr() - proc.c: pci_proc_attach_bus() - remove.c: pci_remove_device_safe Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] acpiphp: only size new busKristen Accardi
Only size the bus that has been added. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI Hotplug: fix up the sysfs file in the compaq pci hotplug driverGreg Kroah-Hartman
The Compaq PCI Hotplug driver was creating 2 sysfs files that contained nothing but debug information, and had way more than "one value" in them. This patch converts the code to use debugfs for these files instead. Compile tested only. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/pciehp_core.cJesper Juhl
Here's a small patch to reduce the nr. of pointer dereferences in drivers/pci/hotplug/pciehp_core.c Benefits: - micro speed optimization due to fewer pointer derefs - generated code is slightly smaller - small line length cleanup - better readability Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/pciehprm_acpi.cJesper Juhl
Here's a small patch to reduce the nr. of pointer dereferences in drivers/pci/hotplug/pciehprm_acpi.c Benefits: - micro speed optimization due to fewer pointer derefs - generated code is slightly smaller - better readability Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/rpaphp_pci.cJesper Juhl
Here's a small patch to reduce the nr. of pointer dereferences in drivers/pci/hotplug/rpaphp_pci.c Benefits: - micro speed optimization due to fewer pointer derefs - generated code should be slightly smaller - better readability note: due to lack of both hardware and cross-compile tools this patch is, unfortunately, completely untested. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/cpqphp_core.cJesper Juhl
Here's a small patch to reduce the nr of pointer dereferences in drivers/pci/hotplug/cpqphp_core.c Benefits of this patch: - micro speed optimization due to fewer pointer derefs - generated code is slightly smaller - tiny line length and whitespace cleanup - better readability Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI: Export pci_cfg_space_sizeBenjamin Herrenschmidt
The powerpc PCI code sets up the PCI tree without doing config space accesses in most cases, from the firmware tree. However, it still wants to call pci_cfg_space_size() under some conditions, thus it needs to be made non-static (though I don't see a point to export it to modules). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI: use bus numbers sparsely, if necessaryDominik Brodowski
Add a warning if a child bus may be inaccessible because the parent bridge has wrong secondary or subordinate bus numbers. Note that this may or may not happen on "transparent" bridges, as can be seen in bug #5557. Also, if we do not fix up the assignment of bus numbers, try to make use of the bus number space available. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] pciehp: allow bridged card hotplugRajesh Shah
This patch fixes bugs in the pciehp driver that prevent hot-add of a card with PCI bridges on it. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] pciehp: handle sticky power-fault statusThomas Schaefer
This patch disables power fault, MRL sensor and presence detection interrupts when a PCIe slot is powered-off and enables those interrupts when it is powered-on again. This is necessary to prevent the associated events from causing an endless cycle of interrupts due to the power-fault bit, which stays set till power is restored to the slot. Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com> Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI Quirk: 1K I/O space granularity on Intel P64H2Daniel Yeisley
I've implemented a quirk to take advantage of the 1KB I/O space granularity option on the Intel P64H2 PCI Bridge. I had to change probe.c because it sets the resource start and end to be aligned on 4k boundaries (after the quirk sets them to 1k boundaries). I've tested this patch on a Unisys ES7000-600 both with and without the 1KB option enabled. I also tested this on a 2 processor Dell box that doesn't have a P64H2 to make sure there were no negative affects there. Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: Implement get_address callbackKenji Kaneshige
The following patch implements .get_address callback of hotplug_slot_ops for SHPCHP driver. With this patch, we can see bus address of hotplug slots as follows: $ cat address 0000:0b:01 Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI Hotplug/powerpc: more removal of duplicated codelinas@austin.ibm.com
The RPAPHP code contains two routines that appear to be gratuitous copies of very similar pci code. In particular, rpaphp_claim_resource ~~ pci_claim_resource (there is a minor, non-functional difference) rpadlpar_claim_one_bus == pcibios_claim_one_bus (the code is identical) This patch removes the rpaphp versions of the code. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI Hotplug/powerpc: remove duplicated codelinas@austin.ibm.com
The RPAPHP code contains a routine that duplicates some existing code. This patch removes the rpaphp version of the code. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper wait for command completionKenji Kaneshige
Current SHPCHP driver uses msleep_interruptible() function to wait for a command completion event. But I think this would cause an unnecessary long wait until timeout, if command completion interrupt came before task state was changed to TASK_INTERRUPTIBLE. This patch fixes this issue. With this patch, command completion becomes faster as follows: o Without this patch # time echo 1 > power real 0m4.708s user 0m0.000s sys 0m0.524s o With this patch # time echo 1 > power real 0m2.221s user 0m0.000s sys 0m0.532s Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper write to Command Completion Detect bitKenji Kaneshige
Current SHPCHP driver writes a '0' to the Command Completion Detect bit to clear the Command Complete Interrupt Pending. But according to the SHPC spec (See 4.7.3.1 System Interrupts), SHPCHP driver must write '1'. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper mmio mappingKenji Kaneshige
Current SHPCHP driver seems not to map MMIO region properly. This patch fixes this bug. This patch also cleanup the code. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper reference to Mode 1 ECC Capability" bitKenji Kaneshige
The hpc_get_mode1_ECC_cap() function of SHPCHP driver seems to refer the wrong bit for refering the "Mode 1 ECC Capability" bit. This bug seems not to cause any problem so far. But I think this should be fixed. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper reference to Slot Avail RegsisterKenji Kaneshige
The hpc_get_max_bus_speed() function of the SHPCHP driver seems to refer wrong bits in the "Slot Avail Register I" and "Slot Avail Register II". This patch fixes this bug. And this also cleanup the code. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: replace pci_find_slot() with pci_get_slot()Kenji Kaneshige
This patch replaces pci_find_slot() with pci_get_slot() in the SHPCHP driver. This enables SHPCHP driver to work on multiple PCI segment systems. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI Hotplug: cpqphp_ctrl.c: remove dead codeAdrian Bunk
The Coverity checker spotted that we already did return -ENOMEM if (!p_mem_node). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCI Hotplug: ibmphp_pci.c copy-n-paste fixJordan, William P
I noticed what appears to be a cut/paste error in drivers/pci/hotplug/ibmphp_pci.c: Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] PCIE: make bus_id for PCI Express devices uniqueSergey Vlasov
The bus_id string must be unique for all devices of that bus in the system, not just for devices with the same parent - otherwise multiple symlinks with identical names appear in /sys/bus/pci_express/devices. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] pci: call pci_read_irq for bridgesKristen Accardi
Call pci_read_irq() for bridges too, so that the pin value is stored for bridges that require interrupts. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] pci: use pin stored in pci_devKristen Accardi
Use the stored value of the interrupt pin rather than try to read the config again. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] apci: use pin stored in pci_devKristen Accardi
Use the stored value of the Interrupt Pin, rather than try to read it again. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] pci: store PCI_INTERRUPT_PIN in pci_devKristen Accardi
Store the value of the INTERRUPT_PIN in the pci_dev structure so that it can be retrieved later. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09Merge Linus' tree.Russell King
2006-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2006-01-09[PATCH] Update cyblafb driverKnut Petersen
This is a major update to the cyblafb framebuffer driver. Most of the stuff has been tested in the mm tree. Main advantages: ============ - vxres > xres support - ywrap and xpan support - much faster for almost all modes (e.g. 1280x1024-16bpp draws more than 41 full screens of text instead of about 25 full screens of text per second on authors Epia 5000) - module init/exit code fixed - bugs triggered by console rotation fixed - lots of minor improvements - startup modes suitable for high performance scrolling in all directions This diff also contains a lot of white space fixes. No side effects are possible, only one single graphics core is affected. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09V4L/DVB (3307): Some cleanups at I2C modulesMauro Carvalho Chehab
- i2c names shorten - removed obsoleted flags on newer modules - small cleanups Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-01-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-01-09V4L/DVB (3305): Replaces old debug msgs to newer onesMauro Carvalho Chehab
- Replaces old debug msgs from bt832, tda743d and tda9875 to newer ones as defined under v4l2-common.h. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3303): Both AverTV Studio 303 cards #6 and #36 use the same IR ↵George Gazurkoff
programming. - Both AverTV Studio 303 cards, #6 and #36, use the same remote control programming. Signed-off-by: George Gazurkoff <gazurkoff@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3296): Fixes a bug at compat_ioctl32 kernel moduleGuy Martin
- There is a bug in the ioctl translations from 32bit userspace to 64bit kernelspace in do_set_window(). - The video window (vw) should be passed to native_ioctl() instead of the video clip. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3295): Add analog support for LifeView FlyDVB Trio.Peter Missel
- Add support for LifeView FlyDVB Trio. - all analog inputs are supported and working, including FM radio - TO DO: dvb & remote control Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3294): Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner.Manenti Marco
- Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner. Signed-off-by: Manenti Marco <marco_manenti@colman.it> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3293): Added digital support for cx88 (cx88-alsa)Mauro Carvalho Chehab
- This module is co-authored by Ricardo Cerqueira <v4l@cerqueira.org>. - Added digital audio support for cx88-based boards that have function 01 enabled. These boards can be identified by having PCI id 1471:8801 or 1471:8811. - Increased DMA buffer from 512 to 4096 seems to fix audio distortion. - Existing audio DMA uses conflict with cx88-alsa. Should be disabled when cx88-alsa module is compiled. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3292): Fix signed/unsigned bug in brightness handling of cx25840Hans Verkuil
- Fix signed/unsigned bug in brightness handling (set to 0 and 128 was returned). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3291): Fix signed/unsigned bug in hue handlingHans Verkuil
- Fix signed/unsigned bug in hue handling (set to -127 and 129 was returned). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3195): Fix for 64-bit compile warningHans Verkuil
- Add the fix for the saa7146 64-bit compile warning (again). This time with comments and checked by Johannes Stezenbach. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3194): Revert one 64-bit fix and improved other 64-bit fixesPeter Beutner
- Reverted objectionable fix in saa7146_hlp.c - Merged in improved dvb 64-bit fixes from Peter Beutner. Signed-off-by: Peter Beutner <p.beutner@gmx.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3287): Add DViCO Bluebird firmware to dvb_get_firmware scriptMichael Krufky
- Add DViCO Bluebird firmware to dvb_get_firmware script, for FusionHDTV USB devices. - Use usb alt setting 0 for EP4 transfer (dvb-t), - Use usb alt setting 7 for EP2 transfer (atsc) - Added comment to lgdt330x.c to indicate support for DViCO FusionHDTV5 USB Gold. Thanks to: Jeff Lee <JeffLee@dvico.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3282): rename cxusb_bluebird_atsc_properties to ↵Michael Krufky
cxusb_bluebird_lgh064f_properties - This property set is for the LG-H064F (FusionHDTV5 USB Gold) - There may, in the future, be a bluebird device using a different NIM, so renaming the struct to somehting NIM-specific is appropriate. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 07:52:56 +0000