aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-05-24remove unnecessary dependency on VIA velocity configYoichi Yuasa
Hi, This patch has removed unnecessary dependency on VIA velocity config. Yoichi Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24fix compiler warning in fixed.cDenver Gingerich
Correct the following compiler warning (and warnings resulting from the correction): warning: 'fixed_mdio_register_device' defined but not used Signed-off-by: Denver Gingerich <denver@ossguy.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24asix.c - Add Belkin F5D5055 idsDavid Hollis
(Originally sent to linux-usb-devel) The attached patch adds the device IDs for the Belkin F5D5055 device. Reported by Andy Juniper <ajuniper@freeuk.com> Signed-off-by: David Hollis <dhollis@davehollis.com> -- David Hollis <dhollis@davehollis.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24ucc_geth:trivial fixLi Yang
Remove redundant includes. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24ucc_geth: Fix MODULE_DEVICE_TABLE() duplicationLi Yang
Fix MODULE_DEVICE_TABLE() duplication in ucc_geth.c and ucc_geth_mii.c for ucc_geth to be compiled as module. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-05-22[PATCH] drivers/net/wireless/libertas/rx.c: fix use-after-freeEugene Teo
skb could have been freed by then. Also, in libertas_upload_rx_packet(), skb->protocol is initialized by eth_type_trans(). Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-22[PATCH] drivers/net/wireless/libertas/fw.c: fix use-before-checkEugene Teo
NULL checks should be performed before the dereference. Spotted by the Coverity checker. Signed-off-by: Eugene Teo <eteo@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-22[PATCH] libertas: skb dereferenced after netif_rxFlorin Malita
In libertas_process_rxed_packet() and process_rxed_802_11_packet() the skb is dereferenced after being passed to netif_rx (called from libertas_upload_rx_packet). Spotted by Coverity (1658, 1659). Also, libertas_upload_rx_packet() unconditionally returns 0 so the error check is dead code - might as well take it out and change the signature. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-21Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Add constant for FCS/CRC length (frame check sequence) declance: Remove a dangling spin_unlock_irq() thingy e1000: Don't enable polling in open() (was: e1000: assertion hit in e1000_clean(), kernel 2.6.21.1)
2007-05-21Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: bump versions libata: Trim trailing whitespace libata: Kiss post_set_mode goodbye ata_piix: clean up pata_hpt366: Enable bits are unreliable so don't use them libata: Add Seagate STT20000A to DMA blacklist. ahci: disable 64bit dma on sb600
2007-05-21libata: bump versionsJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21libata: Trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21libata: Kiss post_set_mode goodbyeAlan Cox
As of the -mm tree we don't have post_set_mode users any more. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21ata_piix: clean upAlan Cox
With cable methods in place we don't need a custom error handler for SATA so get rid of it Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21pata_hpt366: Enable bits are unreliable so don't use themAlan Cox
Various people had problems with both old and new IDE when hpt366 enable bits started getting honoured. It turns out they are not reliable so don't rely on them Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21libata: Add Seagate STT20000A to DMA blacklist.Dave Jones
http://bugzilla.kernel.org/show_bug.cgi?id=1044 points out an additional hard disk that doesn't handle DMA transfers correctly. This patch is the libata variant of the earlier patch to drivers/ide/ Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21ahci: disable 64bit dma on sb600Tejun Heo
SB600 claims it can do 64bit DMA but it can't. Disable it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21declance: Remove a dangling spin_unlock_irq() thingyMaciej W. Rozycki
The spin_unlock_irq() invocation in lance_start_xmit() has no matching locking request. The call is already protected by netif_tx_lock, so remove the statement. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21e1000: Don't enable polling in open() (was: e1000: assertion hit in ↵Auke Kok
e1000_clean(), kernel 2.6.21.1) Herbert Xu wrote: "netif_poll_enable can only be called if you've previously called netif_poll_disable. Otherwise a poll might already be in action and you may get a crash like this." Removing the call to netif_poll_enable in e1000_open should fix this issue, the only other call to netif_poll_enable is in e1000_up() which is only reached after a device reset or resume. Bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=8455 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=240339 Tested by Doug Chapman <doug.chapman@hp.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/cm: Improve local id allocation IPoIB/cm: Fix SRQ WR leak IB/ipoib: Fix typos in error messages IB/mlx4: Check if SRQ is full when posting receive IB/mlx4: Pass send queue sizes from userspace to kernel IB/mlx4: Fix check of opcode in mlx4_ib_post_send() mlx4_core: Fix array overrun in dump_dev_cap_flags() IB/mlx4: Fix RESET to RESET and RESET to ERROR transitions IB/mthca: Fix RESET to ERROR transition IB/mlx4: Set GRH:HopLimit when sending globally routed MADs IB/mthca: Set GRH:HopLimit when building MLX headers IB/mlx4: Fix check of max_qp_dest_rdma in modify QP IB/mthca: Fix use-after-free on device restart IB/ehca: Return proper error code if register_mr fails IPoIB: Handle P_Key table reordering IB/core: Use start_port() and end_port() IB/core: Add helpers for uncached GID and P_Key searches IB/ipath: Fix potential deadlock with multicast spinlocks IB/core: Free umem when mm is already gone
2007-05-21IB/cm: Improve local id allocationMichael S. Tsirkin
The IB CM uses an idr for local id allocations, with a running counter as start_id. This fails to generate distinct ids if 1. An id is constantly created and destroyed 2. A chunk of ids just beyond the current next_id value is occupied This in turn leads to an increased chance of connection request being mis-detected as a duplicate, sometimes for several retries, until next_id gets past the block of allocated ids. This has been observed in practice. As a fix, remember the last id allocated and start immediately above it. This also fixes a problem with the old code, where next_id might overflow and become negative. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-21IPoIB/cm: Fix SRQ WR leakMichael S. Tsirkin
SRQ WR leakage has been observed with IPoIB/CM: e.g. flipping ports on and off will, with time, leak out all WRs and then all connections will start getting RNR NAKs. Fix this in the way suggested by spec: move the QP being destroyed to the error state, wait for "Last WQE Reached" event and then post WR on a "drain QP" connected to the same CQ. Once we observe a completion on the drain QP, it's safe to call ib_destroy_qp. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-21IB/ipoib: Fix typos in error messagesMichael S. Tsirkin
Trivial error message fixups. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-21Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] spelling fixes [ARM] at91_adc parenthesis balance [ARM] 4400/1: S3C24XX: Add high-speed MMC device definition [ARM] 4399/2: S3C2443: Fix SMDK2443 nand timings [ARM] 4398/1: S3C2443: Fix watchdog IRQ number [ARM] 4397/1: S3C2443: remove SDI0/1 IRQ ambiguity [ARM] 4396/1: S3C2443: Add missing HCLK clocks [ARM] 4395/1: S3C24XX: add include of <linux/sysdev.h> to relevant machines [ARM] 4388/1: no need for arm/mm mmap range checks for non-mmu [ARM] 4387/1: fix /proc/cpuinfo formatting for pre-ARM7 parts [ARM] ARMv6: add CPU_HAS_ASID configuration [ARM] integrator: fix pci_v3 compile error with DEBUG_LL [ARM] gic: Fix gic cascade irq handling [ARM] Silence OMAP kernel configuration warning [ARM] Update ARM syscalls [ARM] 4384/1: S3C2412/13 SPI registers offset correction [ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop files [ARM] 4382/1: iop13xx: fix msi support [ARM] Remove Integrator/CP SMP platform support [ARM] 4378/1: KS8695: Serial driver fix ...
2007-05-21Blackfin SPI: cleanup according to David Brownell's reviewBryan Wu
a) platorm_driver_probe(...) instead of platform_driver_register(&driver); b) set bfin_spi_enable and bfin_spi_disable static c) Why is the width flag a u32? d) maybe use dev_dbg() instead of pr_debug() Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin serial driver: implement support for ignoring parity/break errorsMike Frysinger
properly setting up and respecting the read_status_mask / ignore_status_mask fields of the serial core Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin serial driver: fix overhead issueAubrey Li
Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Detach sched.h from mm.hAlexey Dobriyan
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-20IB/mlx4: Check if SRQ is full when posting receiveRoland Dreier
Make mlx4_post_srq_recv() fail if the SRQ is full (head == tail). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-20IB/mlx4: Pass send queue sizes from userspace to kernelEli Cohen
Pass the number of WQEs for the send queue and their size from userspace to the kernel to avoid having to keep the QP size calculations in sync between the kernel driver and libmlx4. This fixes a bug seen with the current mlx4_ib driver and current libmlx4 caused by a difference in the calculated sizes for SQ WQEs. Also, this gives more flexibility for userspace to experiment with using multiple WQE BBs for a single SQ WQE. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/mlx4: Fix check of opcode in mlx4_ib_post_send()Roland Dreier
wr->opcode is invalid if it's >= ARRAY_SIZE(mlx4_ib_opcode), not just strictly >. This was spotted by the Coverity checker (CID 1643). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19mlx4_core: Fix array overrun in dump_dev_cap_flags()Roland Dreier
Don't overrun fname[] array when decoding device flags. This was spotted by the Coverity checker (CID 1642). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/mlx4: Fix RESET to RESET and RESET to ERROR transitionsMichael S. Tsirkin
According to the IB spec, a QP can be moved from RESET back to RESET or to the ERROR state, but mlx4 firmware does not support this and returns an error if we try. Fix the RESET to RESET transition by just returning 0 without doing anything, and fix RESET to ERROR by moving the QP from RESET to INIT with dummy parameters and then transitioning from INIT to ERROR. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/mthca: Fix RESET to ERROR transitionMichael S. Tsirkin
According to the IB spec, a QP can be moved from RESET to the ERROR state, but mthca firmware does not support this and returns an error if we try. Work around this FW limitation by moving the QP from RESET to INIT with dummy parameters and then transitioning from INIT to ERROR. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/mlx4: Set GRH:HopLimit when sending globally routed MADsRoland Dreier
This is the same issue discovered in mthca by Rolf Manderscheid <rvm@obsidianresearch.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/mthca: Set GRH:HopLimit when building MLX headersRolf Manderscheid
Global CM packets used by rmda_cm were being sent with a GRH:hopLimit of zero, causing them to be dropped by the router. The problem is a missing initialization of the hop_limit field in mthca_read_ah(), which was called by build_mlx_header() when sending a MAD on QP1. Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/mlx4: Fix check of max_qp_dest_rdma in modify QPEli Cohen
max_qp_dest_rdma is already in natural units - no need to shift. This was discovered by a test that deliberately requests more outstanding atomic operation than the device supports. Found by Sagi Rotem at Mellanox. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/mthca: Fix use-after-free on device restartAli Ayoub
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/ehca: Return proper error code if register_mr failsHoang-Nam Nguyen
Set the return code of ehca_register_mr() to ENOMEM if the corresponding firmware call fails due to out of resources. Some other error codes were explicitly mapped to EINVAL -- just remove those cases so they get mapped to the default case, which already returns EINVAL anyway. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IPoIB: Handle P_Key table reorderingYosef Etigin
SM reconfiguration or failover possibly causes a shuffling of the values in the P_Key table. Right now, IPoIB only queries for the P_Key index once when it creates the device QP, and hence there are problems if the index of a P_Key value changes. Fix this by using the PKEY_CHANGE event to trigger a recheck of the P_Key index. Signed-off-by: Yosef Etigin <yosefe@voltaire.com> Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/core: Use start_port() and end_port()Roland Dreier
Clean up ib_query_port() and ib_modify_port() slightly by using the just-added start_port() and end_port() helpers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/core: Add helpers for uncached GID and P_Key searchesYosef Etigin
Add ib_find_gid() and ib_find_pkey() functions that use uncached device queries. The calls might block but the returns are always up-to-date. Cache P_Key and GID table lengths in core to avoid extra port info queries. Signed-off-by: Yosef Etigin <yosefe@voltaire.com> Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/ipath: Fix potential deadlock with multicast spinlocksRoland Dreier
Lockdep found the following potential deadlock between mcast_lock and n_mcast_grps_lock: mcast_lock is taken from both interrupt context and process context, so spin_lock_irqsave() must be used to take it. n_mcast_grps_lock is only taken from process context, so at first it seems safe to take it with plain spin_lock(); however, it also nests inside mcast_lock, and hence we could deadlock: cpu A cpu B ipath_mcast_add(): spin_lock_irq(&mcast_lock); ipath_mcast_detach(): spin_lock(&n_mcast_grps_lock); <enter interrupt> ipath_mcast_find(): spin_lock_irqsave(&mcast_lock); spin_lock(&n_mcast_grps_lock); Fix this by using spin_lock_irq() to take n_mcast_grps_lock. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19IB/core: Free umem when mm is already goneEli Cohen
Free umem when task's mm is already destroyed by the time ib_umem_release gets called. Found by Dotan Barak at Mellanox. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-18cciss: Fix pci_driver.shutdown while device is still activeGerald Britton
Fix an Oops in the cciss driver caused by system shutdown while a filesystem on a cciss device is still active. The cciss_remove_one function only properly removes the device if the device has been cleanly released by its users, which is not the case when the pci_driver.shutdown method is called. This patch adds a new cciss_shutdown function to better match the pattern used by various SCSI drivers: deactivate device interrupts and flush caches. It also alters the cciss_remove_one function to match and readds the __devexit annotation that was removed when cciss_remove_one was serving as the pci_driver.shutdown method. Signed-off-by: Gerald Britton <gbritton@alum.mit.edu> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] tcrypt: Add missing error check [CRYPTO] padlock: Make CRYPTO_DEV_PADLOCK a tristate again
2007-05-18Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (32 commits) [POWERPC] Remove build warnings in windfarm_core [POWERPC] Pass per-file CFLAGs for platform specific op codes [POWERPC] Correct #endif comment [POWERPC] Fix ppc_rtas_progress_show() [POWERPC] Fix sed command lines for zlib source construction [POWERPC] Specify GNUTARGET on $(AR) invocations [POWERPC] Make sure device node type/name is not NULL on hot-added nodes [POWERPC] Small fixes for the Ebony device tree [POWERPC] Fix warning on UP [POWERPC] cell_defconfig: Disable cpufreq and pmi [POWERPC] Fix IO space on PCI buses created from of_platform [POWERPC] Add spinlock to request_phb_iospace() [POWERPC] Fix make rules for treeImage.initrd [POWERPC] Remove warning in mpic.c [POWERPC] Update pasemi_defconfig [POWERPC] pasemi: CONFIG_GENERIC_TBSYNC no longer needed [POWERPC] Update iseries_defconfig [POWERPC] Wire up some more syscalls [POWERPC] Fix bug adding properties with flatdevtree.c's ft_set_prop() [POWERPC] Remove fixup_bigphys_addr() for arch/powerpc to avoid link error ...
2007-05-18[CRYPTO] padlock: Make CRYPTO_DEV_PADLOCK a tristate againHerbert Xu
Turning it into a boolean was unnecessary and caused ALGAPI to be pinned down as a boolean to. This patch makes it a tristate again. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-05-17Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_via: pcim_iomap_regions() conversion missed BAR5 libata: remove libata.spindown_compat sata_nv: fix fallout of devres conversion drivers/ata: remove the wildcard from sata_nv driver
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 03:16:12 +0000