aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-03-23mv643xx_eth: add mv643xx_eth_shutdown functionDale Farnsworth
mv643xx_eth_shutdown is needed for kexec. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23SAA9730: Fix large pile of warningsRalf Baechle
The SAA9730 driver doesn't quite grok what the difference between an ioport and memory mapped I/O is. It just happened to work on the one Linux system the SAA9730 happens to spend it's misserable existence on. drivers/net/saa9730.c: In function 'evm_saa9730_enable_lan_int': drivers/net/saa9730.c:68: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:70: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:72: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_disable_lan_int': drivers/net/saa9730.c:78: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:80: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_clear_lan_int': drivers/net/saa9730.c:85: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_block_lan_int': drivers/net/saa9730.c:91: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_unblock_lan_int': drivers/net/saa9730.c:97: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'show_saa9730_regs': drivers/net/saa9730.c:150: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_allocate_buffers': drivers/net/saa9730.c:292: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:295: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:302: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:305: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:312: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_cam_load': drivers/net/saa9730.c:329: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:332: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_mii_init': drivers/net/saa9730.c:369: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:395: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:403: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:410: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:432: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_control_init': drivers/net/saa9730.c:470: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:474: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:478: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:484: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:487: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:490: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:493: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_stop': drivers/net/saa9730.c:505: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:508: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:510: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_dma_init': drivers/net/saa9730.c:536: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_start': drivers/net/saa9730.c:556: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:560: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:564: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:567: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_tx': drivers/net/saa9730.c:590: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_rx': drivers/net/saa9730.c:664: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:729: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_write': drivers/net/saa9730.c:848: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_set_multicast': drivers/net/saa9730.c:943: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:949: warning: passing argument 2 of 'outl' makes integer from pointer without a cast Fixed by using writel instead of outl. 42 warnings less. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Revert "ucc_geth: returns NETDEV_TX_BUSY when BD ring is full"Li Yang
This reverts commit 18babd38547a042a4bfd4154a014d1ad33373eb0. Michael Barkowski points out that it's wrong, and I agree. The patch causes a problem rather than fixes one after another patch "ucc_geth: Fix BD processing" was applied. Before that patch, current packet should be blocked. However after the patch current packet is ok and we only need to block next. Reported-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - T3B2 pcie config spaceDivy Le Ray
T3B2 does not lose its pcie config space on reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - Fix potential MAC hangDivy Le Ray
Under rare conditions, the MAC might hang while generating a pause frame. This patch fine tunes the MAC settings to avoid the issue, allows for periodic MAC state check, and triggers a recovery if hung. Also fix one MAC statistics counter for the rev board T3B2. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - Auto-load FW if mismatch detectedDivy Le Ray
The driver attempts to upgrade the FW if the card has the wrong version. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - fix ethtool cmd on multiple queues portDivy Le Ray
Limit ethtool -g/-G to the given port's queues. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Fix return code in pci-skeleton.cAnton Blanchard
We assign the return value of register_netdev to i, but return rc later on. Fix it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: use per-port phy lockingStephen Hemminger
Rather than a workqueue and a per-board mutex to control PHY, use a tasklet and spinlock. Tasklet is lower overhead and works just as well for this. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: mask irqs when device downStephen Hemminger
Wheen a port on the skge driver is not used, it should mask off interrupts from theat port. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: deadlock on tx timeoutStephen Hemminger
The skge driver will deadlock if gets a transmit timeout because the netif_tx_lock() is already held. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-22Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: IA64: fix %ll build warnings ACPI: IA64: fix allnoconfig build ACPI: Only use IPI on known broken machines (AMD, Dothan/BaniasPentium M) ACPI: ibm-acpi: allow module to load when acpi notifiers can't be set (v2) ACPI: parse 2nd MADT by default ACPICA: revert "acpi_serialize" changes sony-laptop: MAINTAINERS fix entry, add L: and W: ACPI: resolve HP nx6125 S3 immediate wakeup regression ACPI: Add support to parse 2nd MADT
2007-03-22[PATCH] drivers/video/s3fb.c: fix a use-before-checkAdrian Bunk
NULL checks should be before the first dereference. Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ondrej Zajicek <santiago@crfreenet.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-22Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/ds1374: Check workqueue creation status i2c-i801: Restore the device state before leaving i2c-amd8111: Missed cleanup
2007-03-22Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: nat: avoid rerouting packets if only XFRM policy key changed [NETFILTER]: nf_conntrack_netlink: add missing dependency on NF_NAT [NET]: fix up misplaced inlines. [SCTP]: Correctly reset ssthresh when restarting association [BRIDGE]: Fix fdb RCU race [NET]: Fix fib_rules dump race [XFRM]: ipsecv6 needs a space when printing audit record. [X25] x25_forward_call(): fix NULL dereferences [SCTP]: Reset some transport and association variables on restart [SCTP]: Increment error counters on user requested HBs. [SCTP]: Clean up stale data during association restart [IrDA]: Calling ppp_unregister_channel() from process context [IrDA]: irttp_dup spin_lock initialisation [IrDA]: Delay needed when uploading firmware chunks
2007-03-22IB/ipoib: Fix thinko in packet length checksMichael S. Tsirkin
The packet length checks in ipoib are broken: we add 4 bytes (IPoIB encapsulation header) when sending a packet, not 20 bytes (hardware address length) to each packet. Therefore, if connected mode is enabled so that the interface MTU is larger than the multicast MTU, IPoIB may end up trying to send too-long multicast packets. For example, multicast is broken if a message of size 2048 bytes is sent on an interface with UD MTU 2048, because 2048 is bigger than the real limit of 2044 but the code tests against the wrong limit of 2060. This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=418>, submitted by Scott Weitzenkamp <sweitzen@cisco.com>. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IPoIB: Fix use-after-free in path_rec_completion()Michael S. Tsirkin
The connected mode code added the possibility that an neigh struct gets freed in the list_for_each_entry() loop in path_rec_completion(), which causes a use-after-free. Fix this by changing to the _safe variant of the list walking macro. This was spotted by the Coverity checker (CID 1567). Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IB/ehca: Make scaling code work without CPU hotplugJoachim Fenkes
eHCA scaling code must not depend on register_cpu_notifier() if CONFIG_HOTPLUG_CPU is not set, so put all related code into #ifdefs. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22RDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem()Steve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IB/ipath: Check return value of lookup_one_lenBryan O'Sullivan
This fixes kernel.org bug 8003. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IPoIB: Fix race in detaching from mcast group before attachingSean Hefty
There's a race between ipoib_mcast_leave() and ipoib_mcast_join_finish() where we can try to detach from a multicast group before we've attached to it. Fix this by reordering the code in ipoib_mcast_leave to free the multicast group first, which waits for the multicast callback thread (which calls ipoib_mcast_join_finish()) to complete before detaching from the group. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IPoIB/cm: Fix reaping of stale connectionsMichael S. Tsirkin
The sense of the time_after_eq() test in ipoib_cm_stale_task() is reversed so that only non-stale connections are reaped. Fix this by changing to time_before_eq(). Noticed by Pradeep Satyanarayana <pradeep@us.ibm.com>. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22i2c/ds1374: Check workqueue creation statusCyrill V. Gorcunov
Check if workqueue creation failed. Further usage of NULL pointed workqueue is not good I guess ;) Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-03-22i2c-i801: Restore the device state before leavingJean Delvare
Restore the original host configuration on driver unload and on suspend. In particular this returns the SMBus master in I2C mode if it was originally in I2C mode, which should help with suspend/resume if the BIOS expects to find the SMBus master in I2C mode. This fixes bug #6449 (for real this time.) http://bugzilla.kernel.org/show_bug.cgi?id=6449 Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Tommi Kyntola <tommi.kyntola@ray.fi>
2007-03-22i2c-amd8111: Missed cleanupJean Delvare
I missed one cleanup in my previous patch. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-03-20Pull c2 into release branchLen Brown
2007-03-20Pull bugzilla-7465 into release branchLen Brown
2007-03-20Pull bugzilla-8171 into release branchLen Brown
2007-03-20Pull misc-for-upstream into release branchLen Brown
2007-03-20[IrDA]: Delay needed when uploading firmware chunksNigel Williams
With 42101001.sb firmwares, we need a 10 ms delay between firmware chunks upload on irda-usb. Patch from Nigel Williams <nigelw@elder-gods.net> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-19Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: new Novatel device ids for option driver USB: berry_charge: correct dbg string for second magic command usblp: quirk flag and device entry for Seiko Epson M129C printer airprime: USB ID for Novatel EV620 mini PCI-E card USB: necessary update for mos7720 driver USB: RAZR v3i unusual_devs USB: two more device ids for dm9601 usbnet driver USB: fix usb-serial regression
2007-03-19Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_ixp4xx_cf: fix interrupt pata_ixp4xx_cf: fix oops on detach libata: kernel-doc fix sata_inic162x: kill double region requests drivers/ata/Kconfig: PATA_SCC depends on wrong platform sata_sil24: Add Adaptec 1220SA PCI ID libata: don't whine if ->prereset() returns -ENOENT
2007-03-19Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] zcrypt: fix possible race when unloading zcrypt driver modules [S390] zcrypt: fix possible dead lock in AP bus module [S390] Wire up sys_utimes. [S390] reboot from and dump to SCSI under z/VM fails. [S390] Wire up compat_sys_epoll_pwait. [S390] strlcpy is smart enough [S390] memory detection: fix off by one bug. [S390] cio: qdio slsb setup
2007-03-19USB: new Novatel device ids for option driverGreg Kroah-Hartman
This moves all of the Novatel device ids to the option driver, where they belong. Thanks to Novatel for providing a list of all supported devices. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19USB: berry_charge: correct dbg string for second magic commandKen L Johnson
I was testing the berry_charge module with my Blackberry 8700c and had great success, thanks. Looking at the code for my own learning I noticed the following cut and paste error... just a nit. Signed-off-by: Ken L Johnson <ken@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19usblp: quirk flag and device entry for Seiko Epson M129C printerAlan Stern
This patch (as872) adds a device table entry and a new quirk flag to the usblp driver for the Seiko Epson Receipt printer. This printer returns Vendor-Specific values for bInterfaceClass and bInterfaceSubClass, but the bInterfaceProtocol value is valid and it works with usblp. The new quirks flag tells the driver to ignore the Class and SubClass values in the interface descriptor. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19airprime: USB ID for Novatel EV620 mini PCI-E cardMark Glines
Add an ID to recognise the Novatel EV620 wireless adapter. http://www.novatelwireless.com/products/expedite/ev620.html It looks like a mini PCI-Express adapter. The mPCIE connector includes USB pins... the card shows up to the system as a USB device, and powers itself from the PCI bus. The card I have isn't activated yet, so I can't get a PPP session up yet, but I have tested basic serial communication successfully in both 2.6.18 and 2.6.20 kernels, once the product ID was added. (the driver changed quite a bit between the two revs.) In both drivers, it responds to AT commands and such. Signed-off-by: Mark Glines <mark@glines.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19USB: necessary update for mos7720 driverOliver Neukum
these devices have a shared interrupt endpoint. For serialcore to pass an interrupt endpoint to a subdriver, the subdriver must define and _export_ a fitting callback. The mos7720 driver failed to do so. This led invariably to an oops upon open. This patch fixes it. The driver is useless without it. Please try to get this into 2.6.21 and the stable kernels that have this driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19USB: RAZR v3i unusual_devsPete Zaitcev
This adds an unusual_devs entry for the Motorola RAZR 3vi. From: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19USB: two more device ids for dm9601 usbnet driverJon Dowland
This patch for the linux-usb-devel tree adds two more product ids to the dm9601 driver. These ids were found on rebadged dm9601 devices in the wild. Signed-off-by: Jon Dowland <jon@alcopop.org> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19USB: fix usb-serial regressionJim Radford
This patch reverts d9a7ecacac5f8274d2afce09aadcf37bdb42b93a since it breaks drivers that need to access the ->port[] array in shutdown (most of them). Signed-Off: Jim Radford <radford@blackbean.org> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19pata_ixp4xx_cf: fix interruptAlessandro Zummo
As per compact flash specifications, the default irq mode upon cf insertion is pulse mode. this patch fixes the driver to cope with that. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-19pata_ixp4xx_cf: fix oops on detachTejun Heo
pata_ixp4xx_cf dodged dont-clear-drvdata-in-LLD bombing run as it used platform_set_drvdata() instead of dev_set_drvdata(). This causes OOPS on devres host release. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-19libata: kernel-doc fixRandy Dunlap
Warning(linux-2621-rc3g7/drivers/ata/libata-core.c:842): No description found for parameter 'unknown' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-19sata_inic162x: kill double region requestsTejun Heo
Regions are requested twice during initialization causing the second one to fail. This is regression introduced during iomap conversion. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-19drivers/ata/Kconfig: PATA_SCC depends on wrong platformAkira Iguchi
PATA_SCC depends on PPC_CELLEB. (not PPC_IBM_CELL_BLADE) Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-19sata_sil24: Add Adaptec 1220SA PCI IDJamie Clark
Add Adaptec 1220SA (SIL3132) to devices claimed by sata_sil24 Patch generated against 2.6.20.2 Signed-off-by: Jamie Clark <jclark@metaparadigm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-19libata: don't whine if ->prereset() returns -ENOENTTejun Heo
->prereset() returns -ENOENT to tell libata that the port is empty and reset sequencing should be stopped. This is not an error condition. Update ata_eh_reset() such that it sets device classes to ATA_DEV_NONE and return success in on -ENOENT. This makes spurious error message go away. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-19[S390] zcrypt: fix possible race when unloading zcrypt driver modulesRalph Wuerthner
Move try_module_get() call into spin protected block to prevent zcrypt driver module unload while submitting a request to driver. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-03-19[S390] zcrypt: fix possible dead lock in AP bus moduleRalph Wuerthner
AP bus module uses bus_for_each_dev() in software interrupt context to poll for completed requests which might cause dead locks. Solution: use private AP device list for polling in software interrupt context. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 22:23:09 +0000