aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-09-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-09-23[Bluetooth] Fix USB disconnect handling of btusb driverMarcel Holtmann
The USB transport specification for Bluetooth splits the ACL and SCO handling into two separate interfaces. In Linux it possible to probe and disconnect these interfaces independently. So make sure that both interfaces are tightly bound together. This fixes the suspend regression that some people have expierenced. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-23[Bluetooth] Fix wrong URB handling of btusb driverMarcel Holtmann
The btusb driver contains two typos that result in some buggy behavior, but the impact is not immediately visible. During initialization the submitting of interrupt URBs might fail and then make sure to remove the correct flag and not one of the hci_dev flags. When closing down the interface make sure to kill the anchor for the ISOC URBs and not kill the interrupt URBs twice. Also cancel any scheduled work when closing down the interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-23[Bluetooth] Fix I/O errors on MacBooks with Broadcom chipsMarcel Holtmann
The newer MacBooks contain a Broadcom based Bluetooth chip and to make this work properly, HCI_Reset must be send first. If HCI_Reset is not used then a lot of I/O errors show up and its triggers packets from non-existent ACL links. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-22ath9k: Fix IRQ nobody cared issue with ath9kSenthil Balasubramanian
IRQs should be disabled before calling free_irq. Also flush pending IRQs. Pasted the kernel log message for reference. kernel: irq 17: nobody cared (try booting with the "irqpoll" option) kernel: [<c0252d2c>] __report_bad_irq+0x2e/0x6f kernel: [<c0252f22>] note_interrupt+0x1b5/0x207 kernel: [<c025258b>] ? handle_IRQ_event+0x21/0x48 kernel: [<c02534cb>] handle_fasteoi_irq+0x8e/0xad kernel: [<c0205650>] do_IRQ+0x6c/0x84 kernel: [<c020425f>] common_interrupt+0x23/0x28 kernel: [<c034f6f6>] ? acpi_idle_enter_simple+0x198/0x205 kernel: [<c044686c>] ? menu_select+0x5c/0x78 kernel: [<c0445a95>] cpuidle_idle_call+0x59/0x89 kernel: [<c02029d7>] cpu_idle+0xae/0xcf kernel: [<c0543102>] rest_init+0x4e/0x50 kernel: ======================= kernel: handlers: kernel: [<f88fdd26>] (ath_isr+0x0/0x13a [ath9k]) kernel: Disabling IRQ #17 Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Tested-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-22wireless: zd1211rw: add device ID fix wifi dongle "trust nw-3100"born.into.silence@gmail.com
akpm: taken from http://bugzilla.kernel.org/show_bug.cgi?id=11587 I bought the wifi dongle trust nw-3100 wich is in fact a zd1211rw. Its hardware id was missing in the sources, adding it made it work flawlessly. Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-22ath9k: connectivity is lost after Group rekeying is doneSenthil Balasubramanian
Connectivtiy is lost after Group rekeying is done. The keytype maintained by ath9k is reset when group key is updated. Though sc_keytype can be reset only for broadcast key the proper fix would be to use mac80211 provided key type from txinfo during xmit and get rid of sc_keytype from ath9k ath_softc. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Tested-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-22pcmcia: Fix broken abuse of dev->driver_dataAlan Cox
PCMCIA abuses dev->private_data in the probe methods. Unfortunately it continues to abuse it after calling drv->probe() which leads to crashes and other nasties (such as bogus probes of multifunction devices) giving errors like pcmcia: registering new device pcmcia0.1 kernel: 0.1: GetNextTuple: No more items Extract the passed data before calling the driver probe function that way we don't blow up when the driver reuses dev->private_data as its right. As its close to the final release just move the hack so it works out, hopefully someone will be sufficiently embarrassed to produce a nice rework for 2.6.28. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: jornada720_ts - fix build error ( LONG() usage ) Input: bcm5974 - switch back to normal mode when closing
2008-09-21Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (ad7414) Make ad7414_update_device() static hwmon: (it87) Fix fan tachometer reading in IT8712F rev 0x7 (I) hwmon: (atxp1) Fix device detection logic
2008-09-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc_test: initialize mmc_test_lock statically mmc_block: handle error from mmc_register_driver() atmel-mci: Set MMC_CAP_NEEDS_POLL if no detect_pin atmel-mci: Fix bogus debugfs file size atmel-mci: Fix memory leak in atmci_regs_show atmel-mci: debugfs: enable clock before dumping regs tmio_mmc: fix compilation with debug enabled
2008-09-20mmc_test: initialize mmc_test_lock staticallyAkinobu Mita
The mutex mmc_test_lock is initialized at every time mmc_test device is probed. Probing another mmc_test device may break the mutex, if the probe function is called while the mutex is locked. This patch fixes it by statically initializing mmc_test_lock. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20mmc_block: handle error from mmc_register_driver()Akinobu Mita
Check error from mmc_register_driver() and properly unwind block device registration. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20atmel-mci: Set MMC_CAP_NEEDS_POLL if no detect_pinHaavard Skinnemoen
This allows the mmc core to detect card insertion/removal for slots that don't have any CD pin wired up. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20atmel-mci: Fix bogus debugfs file sizeHaavard Skinnemoen
We used to store a binary register snapshot in the "regs" file, so we set the file size to be the size of this snapshot. This is no longer valid since we switched to using seq_file. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20atmel-mci: Fix memory leak in atmci_regs_showHaavard Skinnemoen
The debugfs hook atmci_regs_show allocates a temporary buffer for storing a register snapshot, but it doesn't free it before returning. Plug this leak. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20atmel-mci: debugfs: enable clock before dumping regsHaavard Skinnemoen
Make sure that the peripheral clock is enabled before reading the MMIO registers for the debugfs "regs" dump. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20tmio_mmc: fix compilation with debug enabledDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Ian Molton <spyro@f2s.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20hwmon: (ad7414) Make ad7414_update_device() staticAdrian Bunk
This patch makes the needlessly global ad7414_update_device() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-09-20hwmon: (it87) Fix fan tachometer reading in IT8712F rev 0x7 (I)Andrew Paprocki
The IT8712F v0.9.1 datasheet applies to revisions >= 0x8 (J). The driver was incorrectly attempting to enable 16-bit fan readings on rev 0x7 (I) which led to incorrect RPM values. Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Tested-by: John Gumb <john.gumb@tandberg.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-09-20hwmon: (atxp1) Fix device detection logicJean Delvare
The atxp1 device detection code has a major logic flaw, fix it. Not sure how we managed to miss this when the driver was merged... Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Sebastian Witt <se.witt@gmx.net>
2008-09-19Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] cio: fix orb initialization in cio_start_key [S390] cio: Fix driver_data handling for ccwgroup devices.
2008-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop() RDMA/nes: Fix client side QP destroy IB/mlx4: Fix up fast register page list format mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries
2008-09-19Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clockevents: make device shutdown robust clocksource, acpi_pm.c: fix check for monotonicity clockevents: remove WARN_ON which was used to gather information
2008-09-19Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: Don't wait UNINTERRUPTIBLE for other resync to finish
2008-09-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: e100: Use pci_pme_active to clear PME_Status and disable PME# e1000: prevent corruption of EEPROM/NVM forcedeth: call restore mac addr in nv_shutdown path bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned int sctp: Fix oops when INIT-ACK indicates that peer doesn't support AUTH sctp: do not enable peer features if we can't do them. sctp: set the skb->ip_summed correctly when sending over loopback. udp: Fix rcv socket locking
2008-09-19md: Don't wait UNINTERRUPTIBLE for other resync to finishNeilBrown
When two md arrays share some block device (e.g each uses different partitions on the one device), a resync of one array will wait for the resync on the other to finish. This can be a long time and as it currently waits TASK_UNINTERRUPTIBLE, the softlockup code notices and complains. So use TASK_INTERRUPTIBLE instead and make sure to flush signals before calling schedule. Signed-off-by: NeilBrown <neilb@suse.de>
2008-09-18e100: Use pci_pme_active to clear PME_Status and disable PME#Rafael J. Wysocki
Currently e100 uses pci_enable_wake() to clear pending wake-up events and disable PME# during intitialization, but that function is not suitable for this purpose, because it immediately returns error code if device_may_wakeup() returns false for given device. Make e100 use pci_pme_active(), which carries out exactly the required operations, instead. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18e1000: prevent corruption of EEPROM/NVMChristopher Li
Andrey reports e1000 corruption, and that a patch in vmware's ESX fixed it. The EEPROM corruption is triggered by concurrent access of the EEPROM read/write. Putting a lock around it solve the problem. [akpm@linux-foundation.org: use DEFINE_SPINLOCK to avoid confusing lockdep] Signed-off-by: Christopher Li <chrisl@vmware.com> Reported-by: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Zach Amsden <zach@vmware.com> Cc: Pratap Subrahmanyam <pratap@vmware.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18forcedeth: call restore mac addr in nv_shutdown pathYinghai Lu
after | commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 | Author: Tobias Diedrich <ranma+kernel@tdiedrich.de> | Date: Sun May 18 15:02:37 2008 +0200 | | [netdrvr] forcedeth: setup wake-on-lan before shutting down | | When hibernating in 'shutdown' mode, after saving the image the suspend hook | is not called again. | However, if the device is in promiscous mode, wake-on-lan will not work. | This adds a shutdown hook to setup wake-on-lan before the final shutdown. | | Signed-off-by: Tobias Diedrich <ranma+kernel@tdiedrich.de> | Signed-off-by: Jeff Garzik <jgarzik@redhat.com> my servers with nvidia ck804 and mcp55 will reverse mac address with kexec. it turns out that we need to restore the mac addr in nv_shutdown(). [akpm@linux-foundation.org: fix typo in printk] Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Tobias Diedrich <ranma+kernel@tdiedrich.de> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned intBenjamin Li
The bnx2 driver stores/uses the irq value from the pci_dev internally. But when it stores the irq value, it has been performing an integer demotion. Because of the recent changes made to arch/x86/kernel/io_apic.c, the new method in creating the irq value (using build_irq_for_pci_dev()) has exposed this bug on x86 systems. Because of this demotion when calling request_irq() from bnx2_request_irq(), the driver would get a return code of -EINVAL. This is because the kernel could not find the requested irq descriptor. By storing the irq value properly, the kernel can find the correct irq descriptor and the bnx2 driver can operate normally. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-16hpplus: fix build regressionStephen Hemminger
This fixes kernel regression for 2.6.27-rc in http://bugzilla.kernel.org/show_bug.cgi?id=11547 The change to split 8390 into old isa and non-isa versions overlooked this driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-16Revert "b43/b43legacy: add RFKILL_STATE_HARD_BLOCKED support"Linus Torvalds
This reverts commit bc19d6e0b74ef03a3baf035412c95192b54dfc6f, which as Larry Finger reports causes the radio LED on his system to no longer respond to rfkill switch events. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Requested-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-16PCI: fix compiler warnings in pci_get_subsys()Greg KH
pci_get_subsys() changed in 2.6.26 so that the from pointer is modified when the call is being invoked, so fix up the 'const' marking of it that the compiler is complaining about. Reported-by: Rufus & Azrael <rufus-azrael@numericable.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-09-16Merge branches 'ipoib', 'mlx4' and 'nes' into for-linusRoland Dreier
2008-09-16IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop()Yossi Etigin
Taking rtnl_lock in ipoib_mcast_join_complete() causes a deadlock with ipoib_stop(). We avoid it by scheduling the piece of code that takes the lock on ipoib_workqueue instead of executing it directly. This works because we only flush the ipoib_workqueue with the RTNL not held. The deadlock happens because ipoib_stop() calls ipoib_ib_dev_down() which calls ipoib_mcast_dev_flush(), which calls ipoib_mcast_free(), which calls ipoib_mcast_leave(). The latter calls ib_sa_free_multicast(), and this waits until the multicast completion handler finishes. This handler is ipoib_mcast_join_complete(), which waits for the rtnl_lock(), which was already taken by ipoib_stop(). This bug was introduced in commit a77a57a1 ("IPoIB: Fix deadlock on RTNL in ipoib_stop()"). Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-16RDMA/nes: Fix client side QP destroyFaisal Latif
Fix QP not being destroyed properly on the client, which leads to userspace programs hanging on exit. This is a missing chunk from the connection management rewrite in commit 6492cdf3 ("RDMA/nes: CM connection setup/teardown rework"). Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-16Input: jornada720_ts - fix build error ( LONG() usage )Kristoffer Ericson
This patch removes the usage of LONG() which is deprecated; we also replace BIT() with BIT_MASK(). signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-16[S390] cio: fix orb initialization in cio_start_keyStefan Weinhuber
The functions cio_tm_start_key and cio_start_key use the same private orb structure of a subchannel, so the orb needs to be cleared of old data before it is used again. A respective memset is missing from cio_start_key and hereby added. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-09-16[S390] cio: Fix driver_data handling for ccwgroup devices.Cornelia Huck
Since 16f7f9564c3ae190954f2ec55f385a268b93ac4d, we've seen oopses when grouping/ungrouping devices: Unable to handle kernel pointer dereference at virtual kernel address 0000000000 114000 Oops: 0004 [#1] PREEMPT SMP Modules linked in: bonding qeth_l2 dm_multipath sunrpc qeth_l3 dm_mod qeth chsc_ sch ccwgroup CPU: 1 Not tainted 2.6.26-29.x.20080815-s390xdefault #1 Process iperf (pid: 24412, task: 000000003f446038, ksp: 000000003c929e08) Krnl PSW : 0404d00180000000 000003e00006f6e6 (qeth_irq+0xda/0xb28 [qeth]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3 Krnl GPRS: 0000000000000000 000003e000000003 0000000000000000 0000000000114ccc 000000003fb82e48 000003e00006f60c 000000000000000c 000000003ce72100 0000000000114944 000000003fb82e48 0000000000114ccc 000000003fe8fd28 000003e000066000 000003e000076128 000000003fe8fdb8 000000003fe8fd28 Krnl Code: 000003e00006f6da: bf3f2024 icm %r3,15,36(%r2) 000003e00006f6de: a774023c brc 7,3e00006fb56 000003e00006f6e2: a7280000 lhi %r2,0 >000003e00006f6e6: 5020a1a0 st %r2,416(%r10) 000003e00006f6ea: 58109000 l %r1,0(%r9) 000003e00006f6ee: a7111000 tmll %r1,4096 000003e00006f6f2: a77400f9 brc 7,3e00006f8e4 000003e00006f6f6: 8810000c srl %r1,12 Call Trace: ([<000000003fe8fd20>] 0x3fe8fd20) [<000000000033bf2a>] ccw_device_call_handler+0xb2/0xd8 [<0000000000339e1c>] ccw_device_irq+0x124/0x164 [<0000000000339758>] io_subchannel_irq+0x8c/0x118 [<00000000003309ba>] do_IRQ+0x192/0x1bc [<0000000000114f66>] io_return+0x0/0x8 [<00000000001149cc>] sysc_do_svc+0x0/0x22 ([<0000000000114a18>] sysc_noemu+0x10/0x16) [<00000200002e047c>] 0x200002e047c Last Breaking-Event-Address: [<000003e00006f6d6>] qeth_irq+0xca/0xb28 [qeth] The problem is that dev->driver_data for a ccw device is NULL, while it should point to the ccwgroup device it is a member of. This happened due to incorrect cleanup if creating a ccwgroup device failed because the ccw devices were already grouped. Fix this by setting cdev[i] to NULL in the error handling of ccwgroup_create_from_string() after we give up our reference and by checking if the driver_data points to the ccwgroup device in ccwgroup_release() just to be really sure. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-09-16Input: bcm5974 - switch back to normal mode when closingHenrik Rydberg
Staying in multi-touch mode after closing the device sometimes makes the keyboard drop keys or repeat keys irratically. The conjecture is that some internal buffer starts to overflow, resulting in undefined behavior. Switching back to normal mode when closing the device makes the problem go away. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-16PCI: Fix pcie_aspm=forceSitsofe Wheeler
pcie_aspm=force did not work because aspm_force was being double negated leading to the sanity check failing. Moving a bracket should fix this. Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-09-15IB/mlx4: Fix up fast register page list formatVladimir Sokolovsky
Byte swap the addresses in the page list for fast register work requests to big endian to match what the HCA expectx. Also, the addresses must have the "present" bit set so that the HCA knows it can access them. Otherwise the HCA will fault the first time it accesses the memory region. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-14crypto: talitos - Avoid consecutive packets going out with same IVKim Phillips
The SEC's h/w IV out implementation DMAs the trailing encrypted payload block of the last encryption to ctx->iv. Since the last encryption may still be pending completion, we can sufficiently prevent successive packets from being transmitted with the same IV by xoring with sequence number. Also initialize alg_list earlier to prevent oopsing on a failed probe. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-09-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix PCI_DMA_BUS_IS_PHYS for ARM [ARM] 5247/1: tosa: SW_EAR_IN support [ARM] 5246/1: tosa: add proper clock alias for tc6393xb clock [ARM] 5245/1: Fix warning about unused return value in drivers/pcmcia [ARM] OMAP: Fix MMC device data imx serial: fix rts handling for non imx1 based hardware imx serial: set RXD mux bit on i.MX27 and i.MX31 i.MX serial: fix init failure pcm037: add rts/cts support for serial port
2008-09-13Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] LBA28/LBA48 off-by-one bug in ata.h sata_inic162x: enable LED blinking ata: duplicate variable sparse warning
2008-09-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: re-add debug prints for unmodified BARs PCI: fix pciehp_free_irq() PCI Hotplug: fakephp: fix deadlock... again PCI: Fix printk warnings in setup-bus.c PCI: Fix printk warnings in probe.c PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets
2008-09-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: niu: panic on reset netlink: fix overrun in attribute iteration [Bluetooth] Fix regression from using default link policy ath9k: Assign seq# when mac80211 requests this
2008-09-13memstick: fix MSProHG 8-bit interface mode supportAlex Dubov
- 8-bit interface mode never worked properly. The only adapter I have which supports the 8b mode (the Jmicron) had some problems with its clock wiring and they discovered it only now. We also discovered that ProHG media is more sensitive to the ordering of initialization commands. - Make the driver fall back to highest supported mode instead of always falling back to serial. The driver will attempt the switch to 8b mode for any new MSPro card, but not all of them support it. Previously, these new cards ended up in serial mode, which is not the best idea (they work fine with 4b, after all). - Edit some macros for better conformance to Sony documentation Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-13spi_s3c24xx: fix section warningBen Dooks
Fix the section mismatch warning generated by the incorrect naming of s3c24xx_spidrv which should be s3c24xx_spi_driver: WARNING: drivers/spi/spi_s3c24xx.o(.data+0x4): Section mismatch in reference from the variable s3c24xx_spidrv to the (unknown reference) .exit.text:(unknown) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>