aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-07-11PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridgeGary Hade
acpiphp is writing hot plug parameters to the PCI host bridge PCI config space. This patch removes the incorrect operation. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Cc: <lcm@us.ibm.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3Gary Hade
On systems where the optional _PS3 ACPI object is not implemented acpiphp fails to power off the slot. This is happening because the current code does not attempt to remove power using the _EJ0 ACPI object. This patch restores the _EJ0 evaluation attempt which was apparently inadvertently removed from the power-off sequence when the _EJ0 evaluation code was relocated from power_off_slot() to acpiphp_eject_slot(). Signed-off-by: Gary Hade <garyhade@us.ibm.com> Cc: <lcm@us.ibm.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: hotplug: pciehp: wait for 1 second after power off slotKenji Kaneshige
According to the specification, we must wait for at least 1 second after turning power off before taking any action that relies on power having been removed from the slot/adapter. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: pci_set_power_state(): check for PM capabilities earlierAndrew Lunn
Check for PCI_CAP_ID_PM before checking the device state. Apparently fixes some log spam via the 3c59x driver. Signed-off-by: Andrew Lunn <andrew.lunn@ascom.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: cpci_hotplug: Convert to use the kthread APIScott Murray
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Scott Murray <scottm@somanetworks.com> Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: add pci_try_set_mwiRandy Dunlap
As suggested by Andrew, add pci_try_set_mwi(), which does not require return-value checking. - add pci_try_set_mwi() without __must_check - make it return 0 on success, errno if the "try" failed or error - review callers Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: pcie: remove SPIN_LOCK_UNLOCKEDMilind Arun Choudhary
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: ROUND_UP macro cleanup in drivers/pciMilind Arun Choudhary
ROUND_UP macro cleanup, use ALIGN where ever appropriate Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Acked-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: pci-x-pci-express-read-control-interfaces cleanupsAndrew Morton
- remove unneeded local - 80-col fix Cc: Peter Oruba <peter.oruba@amd.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: ATM: lanai, change VENDOR to DEVICEJiri Slaby
lanai, change VENDOR to DEVICE There were 2 bad named macros in pci_ids (LANAI 2 and IHB). Rename it to DEVICE, because it's device id. Also make some cleanpu in pci_device_id table (use PCI_VDEVICE). Cc: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: read revision ID by defaultAuke Kok
Currently there are 97 occurrences where drivers need the pci revision ID. We can do this once for all devices. Even the pci subsystem needs the revision several times for quirks. The extra u8 member pads out nicely in the pci_dev struct. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: remove useless pci driver methodDavid Brownell
Remove pointless and never-called enable_wake() hook from pci_driver and from documentation. Evidently this was introduced in the 2.4.6 kernel, but there's no evidence it was ever called; and it was rarely implemented. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: unexport pci_proc_attach_deviceAdrian Bunk
On Mon, Apr 02, 2007 at 10:47:45PM -0700, Andrew Morton wrote: >... > Changes since 2.6.21-rc5-mm3: >... > +fix-82875-pci-setup.patch >... > Misc >... pci_proc_attach_device() no longer has any modular user. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI aer: add pci_cleanup_aer_correct_aer_statusStephen Hemminger
Function to clear bogus correctable errors. Analog to pci_aer_uncorrect_are_status. The Marvell chips seem to start out with a bogus value that needs to be cleared. Yanmin ported it to 2.6.22-rc4 by fixing a fuzz patch applying info. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Acked-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: fix AER driver error informationZhang, Yanmin
Below patch fixes aer driver error information and enables aer driver although CONFIG_ACPI=n. As a matter of fact, the new patch is created from below 2 patches plus a minor patch apply fuzz fixing. Because the second patch fixed a compilation error introduced by the first patch, I merge them to facilitate bisect. 1) http://marc.info/?l=linux-kernel&m=117783233918191&w=2; 2) http://marc.info/?l=linux-mm-commits&m=118046936720790&w=2 Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: hotplug: pciehp: Fix possible race condition in writing slotKenji Kaneshige
The slot control register is modified as follows: (1) Read the register value (2) Change the value (3) Write the value to the register Those must be done atomically, otherwise writing to control register would cause an unexpected result. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Make pcibios_add_platform_entries() return errorsMichael Ellerman
Currently pcibios_add_platform_entries() returns void, but could fail, so instead have it return an int and propagate errors up to pci_create_sysfs_dev_files(). Fixes: arch/powerpc/kernel/pci_64.c: In function 'pcibios_add_platform_entries': arch/powerpc/kernel/pci_64.c:878: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result arch/powerpc/kernel/pci_32.c: In function 'pcibios_add_platform_entries': arch/powerpc/kernel/pci_32.c:1043: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Use a weak symbol for the empty version of pcibios_add_platform_entries()Michael Ellerman
I'm not sure if this is going to fly, weak symbols work on the compilers I'm using, but whether they work for all of the affected architectures I can't say. I've cc'ed as many arch maintainers/lists as I could find. But assuming they do, we can use a weak empty definition of pcibios_add_platform_entries() to avoid having an empty definition on every arch. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: add PCI-X/PCI-Express read control interfacesPeter Oruba
This patch introduces an interface to read and write PCI-X / PCI-Express maximum read byte count values from PCI config space. There is a second function that returns the maximum _designed_ read byte count, which marks the maximum value for a device, since some drivers try to set MMRBC to the highest allowed value and rely on such a function. Based on patch set by Stephen Hemminger <shemminger@linux-foundation.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Peter Oruba <peter.oruba@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11pci syscall.c: Switch to refcounting APIAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: point people to Bernhard instead of the linux-kernel listGreg Kroah-Hartman
Back in commit 8c4b2cf9af9b4ecc29d4f0ec4ecc8e94dc4432d7, Bernhard said that he would fix up all instances of when this message happens. So point people at him instead of the linux-kernel list which can not fix things up. Cc: Bernhard Kaindl <bk@suse.de> Cc: Dave Jones <davej@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Miles Lane <miles.lane@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10sx: switch subven and subid valuesJiri Slaby
sx.c is failing to locate Graham's card. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Graham Murray <gmurray@webwayone.co.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: at91_mci: fix hanging and rework to match flowcharts mmc: at91_mci typo sdhci: Fix "Unexpected interrupt" handling mmc: fix silly copy-and-paste error mmc: move layer init and workqueue to core file mmc: refactor host class handling mmc: refactor bus operations sdhci: add ene controller id mmc: bounce requests for simple hosts
2007-07-10Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) bonding/bond_main.c: make 2 functions static ps3: gigabit ethernet driver for PS3, take3 [netdrvr] Fix dependencies for ax88796 ne2k clone driver eHEA: Capability flag for DLPAR support Remove sk98lin ethernet driver. sunhme.c:quattro_pci_find() must be __devinit bonding / ipv6: no addrconf for slaves separately from master atl1: remove write-only var in tx handler macmace: use "unsigned long flags;" Cleanup usbnet_probe() return value handling netxen: deinline and sparse fix eeprom_93cx6: shorten pulse timing to match spec (bis) phylib: Add Marvell 88E1112 phy id phylib: cleanup marvell.c a bit AX88796 network driver IOC3: Switch to pci refcounting safe APIs e100: Fix Tyan motherboard e100 not receiving IPMI commands QE Ethernet driver writes to wrong register to mask interrupts rrunner.c:rr_init() must be __devinit tokenring/3c359.c:xl_init() must be __devinit ...
2007-07-10Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (32 commits) [libata] sata_mv: print out additional chip info during probe [libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info [libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) [libata] Clean up driver udma_mask initializers libata: Support chips with 64K PRD quirk Add a PCI ID for santa rosa's PATA controller. sata_sil24: sil24_interrupt() micro-optimisation Add irq_flags to struct pata_platform_info sata_promise: cleanups [libata] pata_ixp4xx: kill unused var ata_piix: fix pio/mwdma programming [libata] ahci: minor internal cleanups [ATA] Add named constant for ATAPI command DEVICE RESET [libata] sata_sx4, sata_via: minor documentation updates [libata] ahci: minor internal cleanups [libata] ahci: Factor out SATA port init into a separate function [libata] pata_sil680: minor cleanups from benh [libata] sata_sx4: named constant cleanup [libata] pata_ixp4xx: convert to new EH [libata] pdc_adma: Reorder initializers with a couple structs ...
2007-07-10Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits) [MIPS] PNX8550: Cleanup proc code. [MIPS] WRPPMC: Fix build. [MIPS] Yosemite: Fix modpost warnings. [MIPS] Change names of local variables to silence sparse [MIPS] SB1: Fix modpost warning. [MIPS] PNX: Fix modpost warnings. [MIPS] Alchemy: Fix modpost warnings. [MIPS] Non-FPAFF: Fix warning. [MIPS] DEC: Fix modpost warning. [MIPS] MIPSsim: Enable MIPSsim virtual network driver. [MIPS] Delete Ocelot 3 support. [MIPS] remove LASAT Networks platforms support [MIPS] Early check for SMTC kernel on non-MT processor [MIPS] Add debugfs files to show fpuemu statistics [MIPS] Add some debugfs files to debug unaligned accesses [MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs [MIPS] tc35815: Load MAC address via platform_device [MIPS] Move FPU affinity code into separate file. [MIPS] Make ioremap() work on TX39/49 special unmapped segment [MIPS] rbtx4938: Update and minimize defconfig ...
2007-07-10Merge git://git.infradead.org/~dwmw2/battery-2.6Linus Torvalds
* git://git.infradead.org/~dwmw2/battery-2.6: [BATTERY] ds2760 W1 slave [BATTERY] One Laptop Per Child power/battery driver [BATTERY] Apple PMU driver [BATTERY] 1-Wire ds2760 chip battery driver [BATTERY] APM emulation driver for class batteries [BATTERY] pda_power platform driver [BATTERY] Universal power supply class (was: battery class)
2007-07-10Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] vmlogrdr function annotation. [S390] s390: rename CPU_IDLE to S390_CPU_IDLE [S390] cio: Remove prototype for non-existing function cmf_reset(). [S390] zcrypt: fix request timeout handling [S390] system call optimization. [S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILE [S390] Remove volatile from atomic_t [S390] Program check in diag 210 under 31 bit [S390] Bogomips calculation for 64 bit. [S390] smp: Merge smp_count_cpus() and smp_get_save_areas(). [S390] zcore: Fix __user annotation. [S390] fixed cdl-format detection. [S390] sclp: Test facility list before executing a service call. [S390] sclp: introduce some new interfaces. [S390] Fixed comment typo. [S390] vmcp cleanup
2007-07-10Merge branch 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block: pipe: add documentation and comments pipe: change the ->pin() operation to ->confirm() Remove remnants of sendfile() xip sendfile removal splice: completely document external interface with kerneldoc sendfile: remove bad_sendfile() from bad_file_ops shmem: convert to using splice instead of sendfile() relay: use splice_to_pipe() instead of open-coding the pipe loop pipe: allow passing around of ops private pointer splice: divorce the splice structure/function definitions from the pipe header splice: relay support sendfile: convert nfsd to splice_direct_to_actor() sendfile: convert nfs to using splice_read() loop: convert to using splice_direct_to_actor() instead of sendfile() splice: add void cookie to the actor data sendfile: kill generic_file_sendfile() sendfile: remove .sendfile from filesystems that use generic_file_sendfile() sys_sendfile: switch to using ->splice_read, if available vmsplice: add vmsplice-to-user support splice: abstract out actor data
2007-07-10Merge branch 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block: Documentation/block/barrier.txt is not in sync with the actual code: - blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different Use list_for_each_entry() instead of list_for_each() in the block device Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", block/Kconfig already has its own "menuconfig" so remove these Use menuconfigs instead of menus, so the whole menu can be disabled at once cfq-iosched: fix async queue behaviour unexport bio_{,un}map_user Remove legacy CDROM drivers [PATCH] fix request->cmd == INT cases cciss: add new controller support for P700m [PATCH] Remove acsi.c [BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio [PATCH] cdrom_sysctl_info fix blk_hw_contig_segment(): bad segment size checks [TRIVIAL PATCH] Kill blk_congestion_wait() stub for !CONFIG_BLOCK
2007-07-10bonding/bond_main.c: make 2 functions staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Chad Tindel <ctindel@users.sourceforge.net> Cc: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10ps3: gigabit ethernet driver for PS3, take3Masakazu Mokuno
Hi, This is the third submission of the network driver for PS3. The differences from the previous one are: - renamed source file names so that their prefix can match with the module name - added cbe-oss-dev@ozlabs.org line for MAINTAINER file - changed some in copyright comments If there are no more comments, please apply for 2.6.23. Thank you -- Subject: PS3: Ethernet driver From: Masakazu Mokuno <mokuno@sm.sony.co.jp> Add Gigabit Ethernet support for the PS3 game console. The module will be called ps3_gelic. CC: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10[netdrvr] Fix dependencies for ax88796 ne2k clone driverJeff Garzik
It needs writesb(), not available on all platforms. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10eHEA: Capability flag for DLPAR supportJan-Bernd Themann
This patch introduces a capability flag that is used by the DLPAR userspace tool to check which DLPAR features are supported by the eHEA driver. Missing goto has been included. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Remove sk98lin ethernet driver.Jeff Garzik
Unmaintained, superceded by skge. Prodded to deletion by Adrian Bunk. Acked by Stephen Hemminger. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sunhme.c:quattro_pci_find() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10bonding / ipv6: no addrconf for slaves separately from masterJay Vosburgh
At present, when a device is enslaved to bonding, if ipv6 is active then addrconf will be initated on the slave (because it is closed then opened during the enslavement processing). This causes DAD and RS packets to be sent from the slave. These packets in turn can confuse switches that perform ipv6 snooping, causing them to incorrectly update their forwarding tables (if, e.g., the slave being added is an inactve backup that won't be used right away) and direct traffic away from the active slave to a backup slave (where the incoming packets will be dropped). This patch alters the behavior so that addrconf will only run on the master device itself. I believe this is logically correct, as it prevents slaves from having an IPv6 identity independent from the master. This is consistent with the IPv4 behavior for bonding. This is accomplished by (a) having bonding set IFF_SLAVE sooner in the enslavement processing than currently occurs (before open, not after), and (b) having ipv6 addrconf ignore UP and CHANGE events on slave devices. The eql driver also uses the IFF_SLAVE flag. I inspected eql, and I believe this change is reasonable for its usage of IFF_SLAVE, but I did not test it. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10atl1: remove write-only var in tx handlerAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10macmace: use "unsigned long flags;"Alexey Dobriyan
Code will do local_irq_save() on it. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Cleanup usbnet_probe() return value handlingPeter Korsgaard
usbnet_probe() handles a positive return value from the driver bind() function as success, but will later only setup the status handler if the return value was zero, leading to confusion. Patch adjusts this to accept positive values as success in both checks. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10netxen: deinline and sparse fixStephen Hemminger
Get rid of dubious casts to (void *) which causes a sparse warning. And move largeish function from inline to the one file that uses the code, the compiler can then decide to inline it. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10eeprom_93cx6: shorten pulse timing to match spec (bis)Francois Romieu
Based on an original idea by John W. Linville. It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10phylib: Add Marvell 88E1112 phy idOlof Johansson
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the 88E1111 inits. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10phylib: cleanup marvell.c a bitOlof Johansson
Simplify the marvell driver init a bit: Make the supported devices an array instead of explicitly registering each structure. This makes it considerably easier to add new devices down the road. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10AX88796 network driverBen Dooks
Support for the Asix AX88796 network controller, an NE2000 compatible 10/100 ethernet device with internal PHY. The driver supports PHY settings via either ioctl() or the ethtool driver ops. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10[MIPS] DEC: Fix modpost warning.Ralf Baechle
LD vmlinux SYSMAP System.map SYSMAP .tmp_System.map MODPOST vmlinux WARNING: drivers/built-in.o(.data+0x2480): Section mismatch: reference to .init.text: (between 'sercons' and 'ds_parms') Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] Delete Ocelot 3 support.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] remove LASAT Networks platforms supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10[MIPS] tc35815: Load MAC address via platform_deviceAtsushi Nemoto
TX49XX SoCs include PCI NIC (TC35815 compatible) connected via its internal PCI bus, but the NIC's PROM interface is not connected to SEEPROM. So we must provide its ethernet address by another way. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 20:47:39 +0000