aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-08-19[netdrvr eepro100] check for skb==NULL before calling rx_align(skb)Jeff Garzik
2005-08-19[PATCH] e1000 printk warning fix 2Andrew Morton
drivers/net/e1000/e1000_main.c: In function `e1000_clean_tx_irq': drivers/net/e1000/e1000_main.c:2774: warning: size_t format, dma_addr_t arg (arg 8) Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-19[PATCH] network: fix fmvj18x_cs multicast codeKomuro
The multicast code of the fmvj18x_cs driver is broken. I fixed it to work properly. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-19[PATCH] r8169: PCI ID for the Linksys EG1032Francois Romieu
The Linksys EG1032 uses Realtek's 8169 chipset. Credit goes to Bob Wilson <bwilson4web@hotmail.com> for the report. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-19[PATCH] net/cycx_drv: replace delay_cycx() with msleep_interruptible()Nishanth Aravamudan
Use msleep_interruptible() instead of delay_cycx() to guarantee the task delays as expected. Remove the prototype and definition of delay_cycx(). Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-19[PATCH] forcedeth: Initialize link settings in every nv_open()Manfred Spraul
Rüdiger found a bug in nv_open that explains some of the reports with duplex mismatches: nv_open calls nv_update_link_speed for initializing the hardware link speed registers. If current link setting matches the values in np->linkspeed and np->duplex, then the function does nothing. Usually, doing nothing is the right thing, but not in nv_open: During nv_open, the registers must be initialized because the nic was reset. The attached patch fixes that by setting np->linkspeed to an invalid value before calling nv_update_link_speed from nv_open. Signed-Off-By: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-18Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-18Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
2005-08-18Merge head 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-08-18[NET]: Fix comment in loopback driver.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-18[PATCH] DM9000 - incorrect ioctl() handlingBen Dooks
The DM9000 driver is responding to ioctl() calls it should not be. This can cause problems with the wireless tools incorrectly indentifying the device as wireless capable, and crashing under certain operations. This patch also moves the version printk() to the init call, so that you only get it once for multiple devices, and to show it is loaded if there are no defined dm9000s Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-18[PATCH] DM9000 - spinlock fixesBen Dooks
Fix DM9000 driver usage of spinlocks, which mainly came to light when running a kernel with spinlock debugging. These come down to: 1) Un-initialised spin lock 2) Several cases of using spin_xxx(lock) and not spin_xxx(&lock) 3) move the locking around the phy reg for read/write to only keep the lock when actually reading or writing to the phy. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-18[PATCH] 8139cp - redetect link after suspendPierre Ossman
After suspend the driver needs to retest link status in case the cable has been inserted or removed during the suspend. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-18[PATCH] IOC3 fixesRalf Baechle
- Using the right register clearly improves chances of getting the MII code and thus the driver working at all. - On startup check the media type before setting up duplex or we might spend the first 1.2s with a wrong duplex setting. - Get rid of whitespace lines. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-18[PATCH] serverworks: add support for new southbridge IDENarendra Sankar
BCM5785 (HT1000) is a Opteron Southbridge from Serverworks/Broadcom that incorporates a single channel ATA100 IDE controller that is functionally identical to the Serverworks CSB6 IDE controller. This patch adds support for the new PCI device ID and also the support for this controller. Signed-off-by: Narendra Sankar <nsankar@broadcom.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-08-18[PATCH] ide: add support for Netcell Revolution to pci-ide generic driverMatt Gillette
Adds support for Netcell Revolution to pci-ide generic driver by including it in the list of devices matched. Includes the Revolution in the list of simplex devices forced into DMA mode. Signed-off-by: Matt Gillette <matt.gillette@netcell.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-08-18[PATCH] ide: fix PCI_DEVIEC_ID_APPLE_UNI_N_ATA spellingGrant Coady
Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-08-18[PATCH] ide: fix the BLK_DEV_IDEDMA_PCI dependency for drivers/ide/ppc/pmac.cJuha-Matti Tapio
drivers/ide/ppc/pmac.c uses symbols ide_build_sglist, __ide_dma_off_quietly, __ide_dma_on and __ide_dma_timeout when CONFIG_BLK_DEV_IDEDMA_PMAC is defined. The declarations for these symbols (in ide.h) depend on CONFIG_BLK_DEV_IDEDMA_PCI. There is a missing dependency for this in drivers/ide/Kconfig which causes drivers/ide/ppc/pmac.c to fail to build if CONFIG_BLK_DEV_IDEDMA_PMAC is selected but CONFIG_BLK_DEV_IDEDMA_PCI is not. Signed-off-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-08-18[PATCH] ide-floppy: fix IDEFLOPPY_TICKS_DELAYBartlomiej Zolnierkiewicz
* IDEFLOPPY_TICKS_DELAY assumed HZ == 100, fix it * increase the delay to 50ms (to match comment in the code) Thanks to Manfred Scherer <manfred.scherer.mhm@t-online.de> for reporting the problem and testing the patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-08-18[PATCH] disable debug info in radeonfb old driverMichael Iatrou
This driver spams the user. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-18[PATCH] md: make sure mddev->bitmap_offset gets cleared between array ↵NeilBrown
instantiations. ... otherwise we might try to load a bitmap from an array which hasn't one. The bug is that if you create an array with an internal bitmap, shut it down, and then create an array with the same md device, the md drive will assume it should have a bitmap too. As the array can be created with a different md device, it is mostly an inconvenience. I'm pretty sure there is no risk of data corruption. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-18[PATCH] broken error path in drivers/pnp/card.cJaroslav Kysela
The error path in pnp_request_card_device() is broken (one variable is left initialized and the semaphore is not unlocked). This fixes it (and has been tested). Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-17[PATCH] Fix manual binding infinite loopGreg KH
Fix for manual binding of drivers to devices. Problem is if you pass in a valid device id, but the driver refuses to bind. Infinite loop as write() tries to resubmit the data it just sent. Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the problem out. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-17Merge head 'release' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-08-16[PATCH] USB: usbmon: Copyrights and a typoPete Zaitcev
Add copyright statements and fix a typo. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16[PATCH] USB: fix usb wacom tablet driver bugPing Cheng
This patch fixes bug 4905 and a Cintiq 21UX bug. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16[PATCH] PCI Hotplug: new contact infoKristen Accardi
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16[PATCH] PCI: fix quirk-6700-fix.patchAndrew Morton
drivers/built-in.o(.text+0x32c3): In function `quirk_pcie_pxh': /usr/src/25/drivers/pci/quirks.c:1312: undefined reference to `disable_msi_mode' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16[PATCH] PCI: 6700/6702PXH quirkKristen Accardi
On the 6700/6702 PXH part, a MSI may get corrupted if an ACPI hotplug driver and SHPC driver in MSI mode are used together. This patch will prevent MSI from being enabled for the SHPC as part of an early pci quirk, as well as on any pci device which sets the no_msi bit. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16[PATCH] Driver core: potentially fix use after free in class_device_attr_showManeesh Soni
This moves the code to free devt_attr from class_device_del() to class_dev_release() which is called after the last reference to the corresponding kobject() is gone. This allows us to keep the devt_attr alive while the corresponding sysfs file is open. Signed-off-by: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16[IA64] Initialize some spinlocksKeith Owens
Some IA64 spinlocks are not being initialized, make it so. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16[PATCH] skge: turn on link status LEDStephen Hemminger
Turn on the link status LED when link comes up. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-16[PATCH] skge: increase receive flush threshold defaultStephen Hemminger
The flush threshold in the MAC chip should be increased. Found while reviewing vendor version of sk98lin driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-16[PATCH] skge: fibre vs copper detection cleanupStephen Hemminger
Cleanup the code that handles fibre vs copper detection. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> drivers/net/skge.c | 26 ++++++++++++-------------- drivers/net/skge.h | 11 ++--------- 2 files changed, 14 insertions(+), 23 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-16[PATCH] skge: stop bogus sensor messagesStephen Hemminger
Some versions of the Marvell yukon generate bogus sensor warning interrupts. The driver would flood log with these messages. Handle this situation cleanly by masking away at boot time. Fixes: http://bugs.gentoo.org/show_bug.cgi?id=87182 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> drivers/net/skge.c | 24 ++++++++++-------------- drivers/net/skge.h | 8 ++++++-- 2 files changed, 16 insertions(+), 16 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-15Merge ../from-linusLen Brown
2005-08-15Merge ../to-linus-stable/Len Brown
2005-08-15[ACPI] re-enable platform-specific hotkey drivers by defaultLuming Yu
When both platform-specific and generic drivers exist, enable generic over-ride with "acpi_generic_hotkey". http://bugzilla.kernel.org/show_bug.cgi?id=4953 Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-15[PATCH] intelfb/fbdev: Save info->flags in a local variableAntonino A. Daplas
Reported by: Pavel Kysilka (Bugzilla Bug 5059) The intelfb driver does not keep resolution set with fbset after switching to anot console and back. Steps to reproduce: initial options: tty1,tty2 - 1024x768-60 1) tty1 - fbset after booting (1024x768-60) 2) tty1 - fbset 800x600-100 tty1: 800x600-100 3) swith to tty2, swith to tty1 tty1: 1024x768-60 (the same resolution as default from kernel booting) This bug is caused by intelfb unintentionally destroying info->flags in set_par(). Therefore the flag, FBINFO_MISC_USEREVENT used to notify fbcon of a mode change was cleared causing the above problem. This bug though is not intelfb specific, as other drivers may also be affected. The fix is to save info->flags in a local variable before calling any of the driver hooks. A more definitive fix (for post 2.6.13) is to separate info->flags into one that is set by the driver and another that is set by core fbdev/fbcon. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-15[PATCH] intelfb: Do not ioremap entire graphics apertureSylvain Meyer
Reported by: Pavel Kysilka (Bugzilla Bug 4738) modprobe of intelfb results in the following error message: intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chi intelfb: Version 0.9.2 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 allocation failed: out of vmalloc space - use vmalloc=<size> to increase siz intelfb: Cannot remap FB region. This will fail if the graphics aperture size is greater than 128 MB. Fix is to ioremap only from the beginning of graphics aperture to the end of the used framebuffer memory. Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-14Revert PCIBIOS_MIN_IO changes for 2.6.13Linus Torvalds
This reverts commits 71db63acff69618b3d9d3114bd061938150e146b [PATCH] increase PCIBIOS_MIN_IO on x86 and 0b2bfb4e7ff61f286676867c3508569bea6fbf7a ACPI: increase PCIBIOS_MIN_IO on x86 since Lukas Sandströ<lukass@etek.chalmers.se> reports that this breaks his on-board nvidia audio. We should re-visit this later. For now we revert the change Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-14Revert "dc395x: Fix support for highmem"Linus Torvalds
It introduces a repeatable oops in the driver, which is a bigger problem than the patch tries to solve. From the original description: Author: Jamie Lenehan <lenehan@twibble.org> Date: Thu Mar 3 14:41:40 2005 +0200 [PATCH] dc395x: Fix support for highmem From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Removes the page_to_virt and maps sg lists dynamically. This makes the driver work with highmem pages. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-13Fix up mmap of /dev/kmemLinus Torvalds
This leaves the issue of whether we should deprecate the whole thing (or if we should check the whole mmap range, for that matter) open. Just do the minimal fix for now.
2005-08-12[PATCH] w1: more debug level decrease.Evgeniy Polyakov
Do not spam syslog each 10 seconds when there is nothing on the wire. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-11[NETPOLL]: e1000 netpoll tweakMatt Mackall
Suggested by Steven Rostedt, matches his patch included in e100. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-11[PATCH] ixgb: Driver version, white space, commentsMalli Chilakala
Driver version, white space, comments & added Module_version Patch from linville Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-11[PATCH] ixgb: Redefined buffer_info-dma to be dma_addr_t instead of uint64Malli Chilakala
Redefined buffer_info-dma to be dma_addr_t instead of uint64 Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-11[PATCH] ixgb: Remove unused functionsMalli Chilakala
Remove unused functions, render some variable static instead of global - based on patch from Adrian Bunk Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-11[PATCH] ixgb: Ethtool cleanup patch from Stephen HemmingerMalli Chilakala
Ethtool cleanup patch from Stephen Hemminger * use ADVERTISED_xxx fields when setting advertised fields Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-11[PATCH] ixgb: Fix data output by ethtool -dMalli Chilakala
Fix data output by ethtool -d Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-28 04:45:58 +0000