aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-10-16Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: fix DRAM base and limit extraction masks, v2
2009-10-16amd64_edac: fix DRAM base and limit extraction masks, v2Borislav Petkov
This is a proper fix as a follow-up to 66216a7 and 916d11b. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-16Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: Prevent PIO commands to be defered too long if traffic in progress. pata_sc1200: Fix crash on boot libata: fix internal command failure handling libata: fix PMP initialization sata_nv: make sure link is brough up online when skipping hardreset ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2 ahci: Add the AHCI controller Linux Device ID for NVIDIA chipsets. pata_via: extend the rev_max for VT6330
2009-10-16sata_mv: Prevent PIO commands to be defered too long if traffic in progress.Gwendal Grignou
Use excl_link when non NCQ commands are defered, to be sure they are processed as soon as outstanding commands are completed. It prevents some commands to be defered indifinitely when using a port multiplier. Signed-off-by: Gwendal Grignou <gwendal@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-16pata_sc1200: Fix crash on bootAlan Cox
The SC1200 needs a NULL terminator or it may cause a crash on boot. Bug #14227 Also correct a bogus comment as the driver had serializing added so can run dual port. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-16libata: fix internal command failure handlingTejun Heo
When an internal command fails, it should be failed directly without invoking EH. In the original implemetation, this was accomplished by letting internal command bypass failure handling in ata_qc_complete(). However, later changes added post-successful-completion handling to that code path and the success path is no longer adequate as internal command failure path. One of the visible problems is that internal command failure due to timeout or other freeze conditions would spuriously trigger WARN_ON_ONCE() in the success path. This patch updates failure path such that internal command failure handling is contained there. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-16libata: fix PMP initializationTejun Heo
Commit 842faa6c1a1d6faddf3377948e5cf214812c6c90 fixed error handling during attach by not committing detected device class to dev->class while attaching a new device. However, this change missed the PMP class check in the configuration loop causing a new PMP device to go through ata_dev_configure() as if it were an ATA or ATAPI device. As PMP device doesn't have a regular IDENTIFY data, this makes ata_dev_configure() tries to configure a PMP device using an invalid data. For the most part, it wasn't too harmful and went unnoticed but this ends up clearing dev->flags which may have ATA_DFLAG_AN set by sata_pmp_attach(). This means that SATA_PMP_FEAT_NOTIFY ends up being disabled on PMPs and on PMPs which honor the flag breaks hotplug support. This problem was discovered and reported by Ethan Hsiao. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Ethan Hsiao <ethanhsiao@jmicron.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-16sata_nv: make sure link is brough up online when skipping hardresetTejun Heo
prereset doesn't bring link online if hardreset is about to happen and nv_hardreset() may skip if conditions are not right so softreset may be entered with non-working link status if the system firmware didn't bring it up before entering OS code which can happen during resume. This patch makes nv_hardreset() to bring up the link if it's skipping reset. This bug was reported by frodone@gmail.com in the following bug entry. http://bugzilla.kernel.org/show_bug.cgi?id=14329 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: frodone@gmail.com Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-16ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2Shane Huang
This patch renames the code name SB900 into Hudson-2 Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-16ahci: Add the AHCI controller Linux Device ID for NVIDIA chipsets.peer chen
Add the generic device ID for NVIDIA AHCI controller. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-16pata_via: extend the rev_max for VT6330JosephChan@via.com.tw
Fix the VT6330 issue, it's because the rev_max of VT6330 exceeds 0x2f. The VT6415 and VT6330 share the same device ID. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-15Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Fix MODPOST warning powerpc/oprofile: Add ppc750 CL as supported by oprofile powerpc: warning: allocated section `.data_nosave' not in segment powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'" powerpc: Fix hypervisor TLB batching powerpc/mm: Fix hang accessing top of vmalloc space powerpc: Fix memory leak in axon_msi.c powerpc/pmac: Fix issues with sleep on some powerbooks powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler powerpc/ftrace: show real return addresses in modules
2009-10-15Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI button: don't try to use a non-existent lid device ACPI: video: Loosen strictness of video bus detection code eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated eeepc-laptop: Properly annote eeepc_enable_camera(). ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2) fujitsu-laptop: address missed led-class ifdef fixup ACPI: Kconfig, fix proc aggregator text ACPI: add AC/DC notifier
2009-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: fix vt_compat_ioctl
2009-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: gadget: Fix EEM driver comments and VID/PID usb-storage: Workaround devices with bogus sense size USB: ehci: Fix IST boundary checking interval math. USB: option: Support for AIRPLUS MCD650 Datacard USB: whci-hcd: always do an update after processing a halted qTD USB: whci-hcd: handle early deletion of endpoints USB: wusb: don't use the stack to read security descriptor USB: rename Documentation/ABI/.../sysfs-class-usb_host
2009-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: rt2860sta: prevent a panic when disabling when associated staging: more sched.h fixes Staging: et131x: Fix the add_10bit macro Staging: et131x: Correct WRAP bit handling staging: Complete sched.h removal from interrupt.h Staging: vme: fix sched.h build breakage Staging: poch: fix sched.h build breakage Staging: b3dfg: fix sched.h build breakage Staging: comedi: fix sched.h build breakage Staging: iio: Fix missing include <linux/sched.h>
2009-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits) vmxnet: fix 2 build problems net: add support for STMicroelectronics Ethernet controllers. net: ks8851_mll uses mii interfaces net/fec_mpc52xx: Fix kernel panic on FEC error net: Fix OF platform drivers coldplug/hotplug when compiled as modules TI DaVinci EMAC: Clear statistics register properly. r8169: partial support and phy init for the 8168d irda/sa1100_ir: check return value of startup hook udp: Fix udp_poll() and ioctl() WAN: fix Cisco HDLC handshaking. tcp: fix tcp_defer_accept to consider the timeout 3c574_cs: spin_lock the set_multicast_list function net: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs netxen: fix pci bar mapping ethoc: fix warning from 32bit build libertas: fix build net: VMware virtual Ethernet NIC driver: vmxnet3 net: Fix IXP 2000 network driver building. libertas: fix build mac80211: document ieee80211_rx() context requirement ...
2009-10-15Merge branch 'misc' into releaseLen Brown
2009-10-15Merge branch 'launchpad-333386' into releaseLen Brown
2009-10-15Merge branch 'eeepc-laptop' into releaseLen Brown
2009-10-15Merge branch 'bugzilla-14129' into releaseLen Brown
2009-10-14vmxnet: fix 2 build problemsRandy Dunlap
vmxnet3 uses in_dev* interfaces so it should depend on INET. Also fix so that the driver builds when CONFIG_PCI_MSI is disabled. vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy' drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries' drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bhavesh davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14tty: fix vt_compat_ioctlAndreas Schwab
Call compat_unimap_ioctl, not do_unimap_ioctl. This was broken by commit e9216651. The compat_unimap_ioctl was originally called do_unimap_ioctl in fs/compat_ioctl.h which got moved to drivers/char/vt_ioctl.c. In that patch, the caller was not updated and consequently called the native handler. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: provide fallback if mgt_ORB_timeout is missing ieee1394: add documentation entry to MAINTAINERS ieee1394: update URLs in debugging-via-ohci1394.txt
2009-10-14Merge branch 'tty-fixes'Linus Torvalds
* branch 'tty-fixes': tty: use the new 'flush_delayed_work()' helper to do ldisc flush workqueue: add 'flush_delayed_work()' to run and wait for delayed work Make flush_to_ldisc properly handle parallel calls
2009-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: watchdog: Fix rio watchdog probe function sparc64: Set IRQF_DISABLED on LDC channel IRQs. sparc64: Fix D-cache flushing on swapin from SW devices. sparc64: Fix niagara2 perf IRQ bits.
2009-10-14Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] sclp_vt220 build fix [S390] cio: change misleading console logic [S390] call home support: fix proc handler [S390] dasd: use idal for device characteristics [S390] Add highgprs facility to /proc/cpuinfo [S390] dasd: fix locking bug [S390] tape390: Fix request queue handling in block driver [S390] hypfs: Use subcode 6 if subcode 7 is not available
2009-10-14Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: oprofile: warn on freeing event buffer too early oprofile: fix race condition in event_buffer free lockdep: Use cpu_clock() for lockstat
2009-10-14net: add support for STMicroelectronics Ethernet controllers.Giuseppe Cavallaro
This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers (Synopsys IP blocks). Driver documentation: o http://stlinux.com/drupal/kernel/network/stmmac Revisions: o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions Performances: o http://stlinux.com/drupal/benchmarks/networking/stmmac Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14net: ks8851_mll uses mii interfacesRandy Dunlap
From: Randy Dunlap <randy.dunlap@oracle.com> ks8851_mll uses mii interfaces so it needs to select MII. ks8851_mll.c:(.text+0xf95ac): undefined reference to `generic_mii_ioctl' ks8851_mll.c:(.text+0xf96a0): undefined reference to `mii_ethtool_gset' ks8851_mll.c:(.text+0xf96fa): undefined reference to `mii_ethtool_sset' ks8851_mll.c:(.text+0xf9754): undefined reference to `mii_link_ok' ks8851_mll.c:(.text+0xf97ae): undefined reference to `mii_nway_restart' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14net/fec_mpc52xx: Fix kernel panic on FEC errorJohn Bonesio
The MDIO bus cannot be accessed at interrupt context, but on an FEC error, the fec_mpc52xx driver reset function also tries to reset the PHY. Since the error is detected at IRQ context, and the PHY functions try to sleep, the kernel ends up panicking. Resetting the PHY on an FEC error isn't even necessary. This patch solves the problem by removing the PHY reset entirely. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14net: Fix OF platform drivers coldplug/hotplug when compiled as modulesAnton Vorontsov
Some OF platform drivers are missing module device tables, so they won't load automatically on boot. This patch fixes the issue by adding proper MODULE_DEVICE_TABLE() macros to the drivers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14USB: gadget: Fix EEM driver comments and VID/PIDBrian Niebuhr
Remove expository comments and fix USB VID and PID Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14usb-storage: Workaround devices with bogus sense sizeBenjamin Herrenschmidt
usb-storage: Workaround devices with bogus sense size Some devices, such as Huawei E169, advertise more than the standard amount of sense data, causing us to set US_FL_SANE_SENSE, assuming they support it. However, they subsequently fail the request sense with that size. This works around it generically. When a sense request fails due to a device returning an error, US_FL_SANE_SENSE was set, and that sense request used a larger sense size, we retry with a smaller size before giving up. Based on an original patch by Ben Efros <ben@pc-doctor.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: ehci: Fix IST boundary checking interval math.Sarah Sharp
When the EHCI driver falls behind in its scheduling, the active stream's first empty microframe may be in the past with respect to the current microframe. The code attempts to move the starting microframe ("start") N number of microframes forward, where N is the interval of endpoint. However, stream->interval is a copy of the endpoint's bInterval, which is designated in frames for FS devices, and microframes for HS devices. Convert stream->interval to microframes before using it to move the starting microframe forward. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: option: Support for AIRPLUS MCD650 DatacardHuzaifa Sidhpurwala
Here is a patch for Airplus MCD 650 card Note: This device is with Victor V Kudlak, and he confirmed that this device works with the patch. Signed-off-by: Huzaifa Sidhpurwala <sidhpurwala.huzaifa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: whci-hcd: always do an update after processing a halted qTDDavid Vrabel
A halted qTD always triggers a hardware list update because the qset was either removed or reactivated. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: whci-hcd: handle early deletion of endpointsDavid Vrabel
If an endpoint is deleted before it's been fully added to the hardware list, the associated qset will not be fully initialized and an oops will occur when complete(&qset->remove_complete) is called. This can happen if a queued URB is cancelled. Fix this by only removing the qset from the hardware list if the cancelled URB had qTDs. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: wusb: don't use the stack to read security descriptorStefano Panella
An urb's transfer buffer must be kmalloc'd memory and not point to the stack or a DMA API warning results. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: rt2860sta: prevent a panic when disabling when associatedDarren Salt
This fixes a panic which is triggered when the hardware "disappears" from beneath the driver, i.e. when wireless is toggled off via Fn-F2 on various EeePC models. Ref. bug report http://bugzilla.kernel.org/show_bug.cgi?id=13390 panic http://bugzilla.kernel.org/attachment.cgi?id=21928 Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14staging: more sched.h fixesJeff Mahoney
This patch contains more sched.h additions for drivers that built fine under x86_64 but not i386 for some reason. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: et131x: Fix the add_10bit macroAlan Cox
Duh.. we need to preserve the wrap bit when adding. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: et131x: Correct WRAP bit handlingAlan Cox
add_10bit loses the existing wrap value Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14staging: Complete sched.h removal from interrupt.hJeff Mahoney
Commit d43c36dc removed sched.h from interrupt.h and distributed sched.h to users which needed it. This finishes it up for staging. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: vme: fix sched.h build breakageGreg Kroah-Hartman
commit d43c36dc removed sched.h from interrupt.h. This broke the vme drivers. This patch fixes them. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: poch: fix sched.h build breakageGreg Kroah-Hartman
commit d43c36dc removed sched.h from interrupt.h. This broke the poch driver. This patch fixes this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: b3dfg: fix sched.h build breakageGreg Kroah-Hartman
commit d43c36dc removed sched.h from interrupt.h. This broke the b3dfg driver. This patch fixes this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: comedi: fix sched.h build breakageGreg Kroah-Hartman
commit d43c36dc removed sched.h from interrupt.h. This broke some of the comedi drivers. This patch fixes this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14Staging: iio: Fix missing include <linux/sched.h>Jonathan Cameron
linux/sched.h include was removed form linux/poll.h by commmit a99bbaf5ee6bad1aca0c88ea65ec6e5373e86184 Required for definition of TASK_INTERRUPTIBLE amongst others From: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14firewire: sbp2: provide fallback if mgt_ORB_timeout is missingStefan Richter
The Unit_Characteristics entry of an SBP-2 unit directory is not mandatory as far as I can tell. If it is missing, we would probably fail to log in into the target because firewire-sbp2 would not wait for status after it sent the login request. The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it is executed exactly once before login, rather than 0..n times depending on the target's config ROM. With targets with one or more Unit_Characteristics entries, the result is the same as before. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 21:23:38 +0000