aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-02-17drivers/net/eexpress.c: remove duplicate commentShane Shrybman
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17add a help text for BLK_DEV_GENERICJohn Daiker
This fixes kernel Bugzilla #4933. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17fix the BAYCOM_SER_HDX help textSimon Depiets
This fixes kernel Bugzilla #4076. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17fix SCSI_SCAN_ASYNC help textMatthew Wilcox
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17Fix typos concerning hierarchyUwe Kleine-König
heirarchical, hierachical -> hierarchical heirarchy, hierachy -> hierarchy Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17Fix misspellings of "agressive".Robert P. J. Day
Fix the various misspellings of "agressive", as well as a couple other things on the same lines while we're there. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17drivers/scsi/a100u2w.c: trivial typo patchRobert P. J. Day
Trivial typo fix. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17Remove useless FIND_FIRST_BIT() macro from cardbus.c.Robert P. J. Day
Delete the definition of the unused FIND_FIRST_BIT() macro. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17Replace remaining references to "driverfs" with "sysfs".Robert P. J. Day
Globally, s/driverfs/sysfs/g. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17Various typo fixes.Robert P. J. Day
Correct mis-spellings of "algorithm", "appear", "consistent" and (shame, shame) "kernel". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17rio: typo in bitwise AND expression.Willy Tarreau
The line : hp->Mode &= !RIO_PCI_INT_ENABLE; is obviously wrong as RIO_PCI_INT_ENABLE=0x04 and is used as a bitmask 2 lines before. Getting no IRQ would not disable RIO_PCI_INT_ENABLE but rather RIO_PCI_BOOT_FROM_RAM which equals 0x01. Obvious fix is to change ! for ~. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-16Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] allow drm populated agp memory types cleanups [AGPGART] intel-agp: Use ARRAY_SIZE macro when appropriate [AGPGART] Add agp-type-to-mask-type method missing from some drivers. [AGPGART] Don't try to remap i810 registers on resume. [AGPGART] Allow drm-populated agp memory types [AGPGART] compat ioctl
2007-02-16Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Longhaul - Redo Longhaul ver. 2 [CPUFREQ] EPS - Correct 2nd brand test [CPUFREQ] Longhaul - Separate frequency and voltage transition [CPUFREQ] Longhaul - Models of Nehemiah [CPUFREQ] Whitespace fixup [CPUFREQ] Longhaul - Simplier minmult [CPUFREQ] CPU_FREQ_TABLE shouldn't be a def_tristate [CPUFREQ] ondemand governor use new cpufreq rwsem locking in work callback [CPUFREQ] ondemand governor restructure the work callback [CPUFREQ] Rewrite lock in cpufreq to eliminate cpufreq/hotplug related issues [CPUFREQ] Remove hotplug cpu crap [CPUFREQ] Enhanced PowerSaver driver [CPUFREQ] Longhaul - Add VT8235 support [CPUFREQ] Longhaul - Fix guess_fsb function [CPUFREQ] Longhaul - Remove duplicate tables [CPUFREQ] Longhaul - Introduce Nehemiah C [CPUFREQ] fix cpuinfo_cur_freq for CPU_HW_PSTATE [CPUFREQ] Longhaul - Remove "ignore_latency" option
2007-02-16[PATCH] s3c2410fb: fix un-initialised dev fieldBen Dooks
The current driver is not setting the dev field in the private data structure, which can lead to an OOPS if the driver tries to report an error. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] time: x86_64: convert x86_64 to use GENERIC_TIMEjohn stultz
This patch converts x86_64 to use the GENERIC_TIME infrastructure and adds clocksource structures for both TSC and HPET (ACPI PM is shared w/ i386). [akpm@osdl.org: fix printk timestamps] [akpm@osdl.org: fix printk ckeanups] [akpm@osdl.org: hpet build fix] Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@muc.de> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] Add SysRq-Q to print timer_list debug infoIngo Molnar
Add SysRq-Q to print pending timers and other timer info. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] clockevents: i386 driversThomas Gleixner
Add clockevent drivers for i386: lapic (local) and PIT/HPET (global). Update the timer IRQ to call into the PIT/HPET driver's event handler and the lapic-timer IRQ to call into the lapic clockevent driver. The assignement of timer functionality is delegated to the core framework code and replaces the compile and runtime evalution in do_timer_interrupt_hook() Use the clockevents broadcast support and implement the lapic_broadcast function for ACPI. No changes to existing functionality. [ kdump fix from Vivek Goyal <vgoyal@in.ibm.com> ] [ fixes based on review feedback from Arjan van de Ven <arjan@infradead.org> ] Cleanups-from: Adrian Bunk <bunk@stusta.de> Build-fixes-from: Andrew Morton <akpm@osdl.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] Allow early access to the power management timerThomas Gleixner
Allow early access to the power management timer by exposing the verified read function and providing a helper function which checks the pmtmr_ioport variable and returns either the pm timer readout or 0 in case the pm timer is not available. Create a new header file and replace also the ifdef'ed extern definition in arch/i386/kernel/acpi/boot.c This is a preperatory patch for the rework of the local apic timer calibration. No functional changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] ACPI keep track of timer broadcastingThomas Gleixner
This is a preperatory patch for highres/dyntick: - replace the big #ifdef ARCH_APICTIMER_STOPS_ON_C3 hackery by functions - remove the double switch in the power verify function (in the worst case we switched ipi to apic and 20usec later apic to ipi) - keep track of the the state which stops local APIC timer Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Len Brown <len.brown@intel.com> Cc: <linux-acpi@vger.kernel.org> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] ACPI: fix missing include for UPThomas Gleixner
apic.h does not get included on UP compiles. That way the APICTIMER_STOPS_ON_C3 is not there and UP boxen have no support for timer broadcasting. This was never noticed, because the lapic timer is only used for profiling on UP. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Len Brown <len.brown@intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] hrtimers: namespace and enum cleanupThomas Gleixner
- hrtimers did not use the hrtimer_restart enum and relied on the implict int representation. Fix the prototypes and the functions using the enums. - Use seperate name spaces for the enumerations - Convert hrtimer_restart macro to inline function - Add comments No functional changes. [akpm@osdl.org: fix input driver] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] clocksource: replace is_continuous by a flag fieldThomas Gleixner
Using a flag filed allows to encode more than one information into a variable. Preparatory patch for the generic clocksource verification. [mingo@elte.hu: convert vmitime.c to the new clocksource flag] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16[PATCH] correct CONFIG_GIGASET_M101 Makefile entryAdrian Bunk
Advanced Mathematics, lesson 1: 101 != 105 ;-) Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-15sata_vsc: use default cache line size if non-zeroNate Dailey
This modifies drivers/ata/sata_vsc.c to only set the cache line size to 0x80 if the default value is zero. Apparently zero isn't allowed due to a bug in the chip, but I've found performance is much better with the (non-zero) default instead of 0x80. [note1: "default" means BIOS-programmed value, in this context -jgarzik] [note2: superfluous braces were removed from the patch -jg] Signed-off-by: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-15sata_nv: handle SError status indicationRobert Hancock
ADMA-capable controllers provide a bit in the status register that appears to indicate that the controller detected an SError condition. Update sata_nv to detect this and trigger error handling in order to handle the fault. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-15add delay around sl82c105_reset_engine callsOlaf Hering
The hald media changed polling does really confuse things. Noone knows why the delays are needed, but they give us access to the CD. An udelay(50) will give reliable access to the drive, but there is still one (or more) EH reset. The drive works without EH resets with udelay(100). Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-15libata: clear TF before IDENTIFYingTejun Heo
Some devices chock if Feature is not clear when IDENTIFY is issued. Set ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE for IDENTIFY such that whole TF is cleared when reading ID data. Kudos to Art Haas for testing various futile patches over several months and Mark Lord for pointing out the fix. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Art Haas <ahaas@airmail.net> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-15libata: Add a host flag to indicate lack of IORDY capabilityAlan Cox
This is the first preparation to doing the !IORDY cases properly. Further diffs will then add the needed logic to do it right. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-15sata_promise: new EH conversion for 20619 chips, take 2Mikael Pettersson
This patch updates the sata_promise driver to use new-style libata error handling for 20619 (TX4000) chips. sata_promise already uses new EH for the other chips it supports, so the patch is quite simple: * remove ->phy_reset and ->eng_timeout ops from pdc_pata_ops, and instead bind ->freeze, ->thaw, ->error_handler, and ->post_internal_cmd to existing new EH functions * drop ATA_FLAG_SRST from board_20619's flags * remove now unused pdc_pata_phy_reset() and pdc_eng_timeout() Tested on a TX4000 with both modern working disks and old/quirky disks. Also used a CD-RW drive to test reading and writing CDs. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-15sata_promise: fix missing PATA cable detectionMikael Pettersson
This patch fixes an oversight which caused sata_promise to not perform cable detection on the TX2plus chips' PATA ports. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-14Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (94 commits) [PATCH] x86-64: Remove mk_pte_phys() [PATCH] i386: Fix broken CONFIG_COMPAT_VDSO on i386 [PATCH] i386: fix 32-bit ioctls on x64_32 [PATCH] x86: Unify pcspeaker platform device code between i386/x86-64 [PATCH] i386: Remove extern declaration from mm/discontig.c, put in header. [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c [PATCH] i386: Move mce_disabled to asm/mce.h [PATCH] i386: paravirt unhandled fallthrough [PATCH] x86_64: Wire up compat epoll_pwait [PATCH] x86: Don't require the vDSO for handling a.out signals [PATCH] i386: Fix Cyrix MediaGX detection [PATCH] i386: Fix warning in cpu initialization [PATCH] i386: Fix warning in microcode.c [PATCH] x86: Enable NMI watchdog for AMD Family 0x10 CPUs [PATCH] x86: Add new CPUID bits for AMD Family 10 CPUs in /proc/cpuinfo [PATCH] i386: Remove fastcall in paravirt.[ch] [PATCH] x86-64: Fix wrong gcc check in bitops.h [PATCH] x86-64: survive having no irq mapping for a vector [PATCH] i386: geode configuration fixes [PATCH] i386: add option to show more code in oops reports ...
2007-02-14[PATCH] sysctl: remove insert_at_head from register_sysctlEric W. Biederman
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: C99 convert ctl_tables in drivers/parport/procfs.cEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: register the sysctl number used by the arlan driverEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: remove sys_sysctl support from drivers/char/rtc.cEric W. Biederman
The real time clock driver was using the binary number reserved for cdroms in the sysctl binary number interface, which is a no-no. So since the sysctl binary interface is wrong remove it. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: remove sys_sysctl support from the hpet timer driverEric W. Biederman
In the binary sysctl interface the hpet driver was claiming to be the cdrom driver. This is a no-no so remove support for the binary interface. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: cdrom: don't set de->ownerEric W. Biederman
There is no need for open files in /proc/sys/XXX to hold a reference count on the module that provides the file to prevent module unload races. While there is code active in the module p->used in the sysctl_table_header is incremented, preventing the sysctl from being unregisted. Once the sysctl is unregistered it cannot be found. Open files are also not a problem as they revalidate the sysctl information and bump p->used before accessing module code. So setting de->owner is unnecessary, makes for a bad example and gets in my way of removing ctl_table->de. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: cdrom: remove unnecessary insert_at_head flagEric W. Biederman
With unique binary sysctl numbers setting insert_at_head to override other sysctl entries is pointless. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: ipmi: remove unnecessary insert_at_head flagEric W. Biederman
With unique sysctl binary numbers setting insert_at_head is pointless. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Corey Minyard <minyard@acm.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: mac_hid: remove unnecessary insert_at_head flagEric W. Biederman
With unique sysctl binary numbers setting insert_at_head is pointless. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: md: remove unnecessary insert_at_head flagEric W. Biederman
The sysctls used by the md driver are have unique binary numbers so remove the insert_at_head flag as it serves no useful purpose. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: scsi: remove unnecessary insert_at_head flagEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] scheduled removal of SA_XXX interrupt flags: ata fixAndrew Morton
SA_SHIRQ is going away. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixups 2Thomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users in -mm. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] SPI: atmel_spi driverHaavard Skinnemoen
Driver for the Atmel on-chip SPI master controller. Tested primarily on AVR32/AT32AP7000/ATSTK1000 using mtd_dataflash and the jffs2 filesystem. Should also work fine on various AT91 ARM-based chips like AT91SAM926x and AT91RM9200. Hardware documentation can be found in the AT32AP7000 data sheet, or its AT91 siblings, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] PNX8550 UART driverVitaly Wool
Add UART support for PNX8330/8550/8950 Philips MIPS-based SoCs. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] serial: replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] serial: make sure UART is powered up when dumping MCTRL statusGeorge G. Davis
Since serial devices are powered down when not in use and some of those devices cannot be accessed when powered down, we need to enable power around calls to get_mcrtl() when dumping port state via uart_line_info(). This resolves hangs observed on some machines while reading serial device registers when a port is powered off. Signed-off-by: George G. Davis <gdavis@mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>