aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-10-18[IB] Fail sysfs queries after device is unregisteredRoland Dreier
We keep IB device structures around until the last sysfs reference is gone, but we shouldn't ask the low-level driver to do anything after the LLD unregisters the device. To handle this, check the reg_state field and just fail sysfs show() requests if the device has already been unregistered. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18[IB] mthca: Add struct pci_driver.owner fieldRoland Dreier
Set mthca_driver.owner to THIS_MODULE. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18[IB] mthca: Use enum in mthca_alloc_db() prototypeRoland Dreier
Make the type parameter of mthca_alloc_db() be an enum mthca_db_type instead of an int. This doesn't have any practical effect but documents the functions a little better. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18[IPoIB] Improve ipoib_timeout() outputRoland Dreier
Use jiffies_to_msecs() so we print a human-readable time so we don't have to worry about what HZ is configured to, and print out a few values to make post-mortem analysis easier. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] ucm: quiet sparse warningsRoland Dreier
Make ctx_id_mutex and ctx_id_table static to quiet sparse warnings. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] CM: bind IDs to a specific deviceSean Hefty
Bind communication identifiers to a device to support device removal. Export per HCA CM devices to userspace. Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2005-10-17[IB] merge ucm.h into ucm.cSean Hefty
Eliminate ucm.h. Replace ucm_dbg with direct call to printk KERN_ERR. Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2005-10-17[IB] uverbs: Implement more commandsRoland Dreier
Add kernel support for userspace calling poll CQ, request CQ notification, post send, post receive, post SRQ receive, create AH and destroy AH commands. These commands allow us to support userspace verbs for devices that can't perform these operations directly from userspace (eg the PathScale HCA). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] uverbs: Add a mask of device methods allowed for userspaceRoland Dreier
Give each device a uverbs_cmd_mask, so that a low-level driver can control which methods may be called on behalf of userspace. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] fail SA queries if device initialization failedRoland Dreier
If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] uverbs: unlock correctly in error pathsRoland Dreier
A couple of functions were missing spin_unlock calls in error paths. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IPoIB] Rename ipoib_create_qp() -> ipoib_init_qp() and fix error cleanupRoland Dreier
ipoib_create_qp() no longer creates IPoIB's QP, so it shouldn't destroy the QP on failure -- that unwinding happens elsewhere, so the current code can cause a double free. While we're at it, the function's name should match what it actually does, so rename it to ipoib_init_qp(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] mthca: Better limit checking and reportingJack Morgenstein
Check the sizes of CQs, QPs and SRQs when creating objects, and fail instead of creating too-big queues. Also return real limits instead of just plausible-sounding values from mthca_query_device(). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] Fix leak on MAD initialization failureRoland Dreier
There is a bug in ib_mad_init_device(): if ib_agent_port_open() fails for a given port, then the current code doesn't call ib_mad_port_close() for that port. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] mthca: detect SRQ overflowRoland Dreier
The hardware relies on us keeping one extra work request that never gets used in SRQs. Add checks to the SRQ work request posting functions so that they fail when someone is about to use up that extra work request, rather than when someone uses the very last work request. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] mthca: SRQ limit reached eventsRoland Dreier
Our hardware supports generating an event when the number of receives posted to a shared receive queue (SRQ) falls below a user-specified limit. Implement mthca_modify_srq() to arm the limit, and add code to handle dispatching SRQ events when they occur. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] Check port number in ib_query_port()/ib_modify_port()Roland Dreier
Check port number before passing query_port or modify_port operations on to device driver. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] uverbs: reject invalid memory registration permission flagsRoland Dreier
Reject userspace memory registrations with invalid permission flags: "local write" is required if "remote write" or "remote atomic" is also requested. Pointed out by Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] mthca: Fill in more fields in query_port methodJack Morgenstein
Add code to fill in the bad_pkey_cntr, max_mtu, active_mtu and subnet_timeout fields in mthca_query_port(). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] uverbs: Add device-specific ABI version attributeRoland Dreier
Add abi_version attribute to uverbs class devices to allow for ABI versioning of device-specific interfaces. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] uverbs: Fix up resource creation error pathsRoland Dreier
By waiting to add resources to our lists until after the last operation that can fail, we don't have to remove them from their lists in the error path. Also, we should hold the idr mutex until we know whether resource creation has succeed or failed, to avoid someone finding a resource in our table before we're ready. Loosely based on work by Robert Walsh <rjwalsh@pathscale.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] uverbs: ABI-breaking fixes for userspace verbsRoland Dreier
Introduce new userspace verbs ABI version 3. This eliminates some unneeded commands, and adds support for user-created completion channels. This cleans up problems with file leaks on error paths, and also makes sure that file descriptors are always installed into the correct process. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] mthca: Report correct atomic capabilityJack Morgenstein
Return correct atomic capability flag from mthca query function. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] Add checks to multicast attach and detachJack Morgenstein
Add checks so that we only allow multicast attach/detach with a valid multicast GID and the correct QP type. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[PATCH] fix black/white-only svideo input in vpx3220 decoderRonald S. Bultje
Fix the fact that the svideo input will only give input in black/white in some circumstances. Reason is that in the PCI controller driver (zr36067), after setting input, we reset norm, which overwrites the input register with the default. This patch makes it always set the correct value for the input when changing norm. Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] fix vpx3220 offset issue in SECAMRonald S. Bultje
Fix bug #5404 in kernel bugzilla. It basically updates the vpx3220 initialization tables with some newer values that we've had in CVS for a while (and that, for some reason, never ended up in the kernel... must've gotten lost). Those fix a ~16 pixels noise at the top of the picture in at least SECAM, although (now that I think about it) PAL was probably affected, also. Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] SVGATextMode fixSamuel Thibault
Fix bug 5441. I didn't know about messy programs like svgatextmode... Couldn't this be integrated in some linux/drivers/video/console/svgacon.c ?... So because of the existence of the svgatextmode program, the kernel is not supposed to touch to CRT_OVERFLOW/SYNC_END/DISP/DISP_END/OFFSET ? Disabling the check in vgacon_resize() might help indeed, but I'm really not sure whether it will work for any chipset: in my patch, CRT registers are set at each console switch, since stty rows/cols apply to consoles separately... The attached solution is to keep the test, but if it fails, we assume that the caller knows what it does (i.e. it is svgatextmode) and then disable any further call to vgacon_doresize. Svgatextmode is usually used to _expand_ the display, not to shrink it. And it is harmless in the case of a too big stty rows/cols: the display will just be cropped. I tested it on my laptop, and it works fine with svgatextmode. A better solution would be that svgatextmode explicitely tells the kernel not to care about video timing, but for this an interface needs be defined and svgatextmode be patched. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] usbserial: Regression in USB generic serial driverRandall Nortman
Kernel version 2.6.13 introduced a regression in the generic USB serial converter driver (usbserial.o, drivers/usb/serial/generic.c). The bug manifests, as far as I can tell, whenever you attempt to write to the device -- the write will never complete (write() returns 0, or blocks). Signed-off-by: Randall Nortman <oss@wonderclown.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-10-14Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-10-14Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-10-14[PATCH] sh-sci.c sci_start_tx errorYoshinori Sato
Argument does not agree. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] Dallas's 1-wire bus compile errorEvgeniy Polyakov
drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `netlink_kernel_create' drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `sock_release' Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] aacraid: host_lock not released fixMark Haverkamp
While doing some testing of error cases I ran into this bug. In some cases the reset handler can exit with the host_lock still held. Signed-off-by: Mark Haverkamp <markh@osdl.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] wireless/airo: Build fixMatteo Croce
The aironet PCI driver has a build dependency on ISA that prevent the driver to compile on systems that doesn't support ISA, like x86_64. The driver really doesn't depend on ISA, it does some ISA stuff in the initialization code, since the driver supports both ISA and PCI cards. So the driver should depend on ISA_DMA_API to build on all systems, and this will not hurt PCI at all. Signed-off-by: Matteo Croce <3297627799@wind.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] radio-cadet: check request_region() return value correctlyAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] zaurus: fix dependencies on collie keyboardPavel Machek
This fixes depenencies of collie keyboard. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] zaurus: fix soc_common.cPavel Machek
This fixes wrong comments, non-working debug subsystem, and some potentially dangerous macros. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] zaurus: fix compilation with cpufreq disabledPavel Machek
This fixes compilation with CPU_FREQ disabled. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[QLOGICPTI]: Handle INQUIRY response sniffing correctly.David S. Miller
These days, in 2.6.x, even INQUIRY commands are sent using scatter gather lists. Bug reported by Tom 'spot' Callaway. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-14[ARM] 3014/1: Spitz keyboard: Correct the right shift keyRichard Purdie
Patch from Richard Purdie Correct the right shift key entry in the spitz keyboard driver. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14[SERIAL] Add SupraExpress 336i Sp ASVD modem IDBaris Cicek
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13Merge branch 'release' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-10-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-10-12Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-10-12Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-10-12[ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.cLothar Wassmann
Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2971/1: i.MX uart handle rts irqSascha Hauer
Patch from Sascha Hauer handle rts interrupt Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2976/1: S3C2410: add static to functions in serial driverBen Dooks
Patch from Ben Dooks The s3c2410 serial driver is missing static declerations on several functions that are not exported, and have no need of being exported outside the driver Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds