aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-11-16USB: ftdi_sio: adds vendor/product id for a RFID construction kitKjell Myksvoll
Adds the vendor and prodcut id for a RFID construction kit from the Elektor Electronics magazine, september 2006. From: Kjell Myksvoll <kmyksvo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-16OHCI: disallow autostop when wakeup is not availableAlan Stern
This patch (as822) prevents the OHCI autostop mechanism from kicking in if the root hub is not able or not allowed to issue wakeup requests. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-16IPoIB: Clear high octet in QP numberMichael S. Tsirkin
IPoIB assumes that high (reserved) octet in the hardware address is 0, and copies it into the QPN. This violates RFC 4391 (which requires that the high 8 bits are ignored on receive), and will result in an invalid QPN being used when interoperating with IPoIB connected mode. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-16Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] psi240i.c: fix an array overrun [SCSI] gdth: Fix && typos [SCSI] iscsi class: update version [SCSI] iscsi_tcp: fix xmittask oops [SCSI] iscsi: add newlines to debug messages [SCSI] iscsi: always release crypto [SCSI] sg: fix incorrect last scatg length [SCSI] 3ware 9000 add support for 9650SE [SCSI] aic94xx SCSI timeout fix: SMP retry fix. [SCSI] aic94xx SCSI timeout fix
2006-11-16Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Disable TSO on 5906 if CLKREQ is enabled. [TCP]: Fix up sysctl_tcp_mem initialization. [NETFILTER]: ip6_tables: use correct nexthdr value in ipv6_find_hdr() [NETFILTER]: ip6_tables: fixed conflicted optname for getsockopt [NETFILTER]: Use pskb_trim in {ip,ip6,nfnetlink}_queue [NETFILTER]: nfnetlink_log: fix byteorder of NFULA_SEQ_GLOBAL [TG3]: Increase 5906 firmware poll time.
2006-11-16[PATCH] scsi: clear garbage after CDBs on SG_IOTejun Heo
ATAPI devices transfer fixed number of bytes for CDBs (12 or 16). Some ATAPI devices choke when shorter CDB is used and the left bytes contain garbage. Block SG_IO cleared left bytes but SCSI SG_IO didn't. This patch makes SCSI SG_IO clear it and simplify CDB clearing in block SG_IO. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mathieu Fluhr <mfluhr@nero.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Douglas Gilbert <dougg@torque.net> Acked-by: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-16[PATCH] dell_rbu: fix error checkAkinobu Mita
platform_device_register_simple() returns error code as pointer when it fails. The return value should be checked by IS_ERR(). Cc: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-16[PATCH] parport: fix compilation failureArnaud Giersch
Fix compilation failure. Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-16[PATCH] IB/ipath - fix driver build for platforms with PCI, but not HTBryan O'Sullivan
The PCI Express and Hypertransport chip-specific source files should only be built when the kernel has the capability of actually compiling them. This fixes the driver build on, for example, ia64. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-16[PATCH] set default video mode on PowerBook WallstreetOlaf Hering
Finally add the third PowerBook Wallstreet 233MHz model to the list of known display resolutions. Without this change, a 640x480 video mode is used. A workaround so far was to boot with 'video=atyfb:vmode:14' Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Solomon Peachy <pizza@shaftnet.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-16[PATCH] pnx4008:fix NULL dereference in rgbfbVitaly Wool
Fix possible NULL dereference in pnxrgbfb. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-16[PATCH] pnx4008: rename driverVitaly Wool
Make the drivers' names less generic to avoid possible confusion in future, as was requested by Russell King. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Acked-by: James Simmons <jsimmons@infradead.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-16[PATCH] ipmi: use platform_device_add() instead of ↵Zhang, Yanmin
platform_device_register() to register device allocated dynamically I got below warning when running 2.6.19-rc5-mm1 on my ia64 machine. WARNING at lib/kobject.c:172 kobject_init() Call Trace: [<a0000001000137c0>] show_stack+0x40/0xa0 sp=e0000002ff9f7bc0 bsp=e0000002ff9f0d10 [<a000000100013850>] dump_stack+0x30/0x60 sp=e0000002ff9f7d90 bsp=e0000002ff9f0cf8 [<a000000100407bb0>] kobject_init+0x90/0x160 sp=e0000002ff9f7d90 bsp=e0000002ff9f0cd0 [<a0000001005ae080>] device_initialize+0x40/0x1c0 sp=e0000002ff9f7da0 bsp=e0000002ff9f0cb0 [<a0000001005b88c0>] platform_device_register+0x20/0x60 sp=e0000002ff9f7dd0 bsp=e0000002ff9f0c90 [<a000000100592560>] try_smi_init+0xbc0/0x11e0 sp=e0000002ff9f7dd0 bsp=e0000002ff9f0c50 [<a000000100594900>] init_ipmi_si+0xaa0/0x12e0 sp=e0000002ff9f7de0 bsp=e0000002ff9f0bd8 [<a000000100009910>] init+0x350/0x780 sp=e0000002ff9f7e00 bsp=e0000002ff9f0ba8 [<a000000100011d30>] kernel_thread_helper+0x30/0x60 sp=e0000002ff9f7e30 bsp=e0000002ff9f0b80 [<a0000001000090c0>] start_kernel_thread+0x20/0x40 sp=e0000002ff9f7e30 bsp=e0000002ff9f0b80 WARNING at lib/kobject.c:172 kobject_init() Call Trace: [<a0000001000137c0>] show_stack+0x40/0xa0 sp=e0000002ff9f7b40 bsp=e0000002ff9f0db0 [<a000000100013850>] dump_stack+0x30/0x60 sp=e0000002ff9f7d10 bsp=e0000002ff9f0d98 [<a000000100407bb0>] kobject_init+0x90/0x160 sp=e0000002ff9f7d10 bsp=e0000002ff9f0d70 [<a0000001005ae080>] device_initialize+0x40/0x1c0 sp=e0000002ff9f7d20 bsp=e0000002ff9f0d50 [<a0000001005b88c0>] platform_device_register+0x20/0x60 sp=e0000002ff9f7d50 bsp=e0000002ff9f0d30 [<a00000010058ac00>] ipmi_register_smi+0xcc0/0x18e0 sp=e0000002ff9f7d50 bsp=e0000002ff9f0c90 [<a000000100592600>] try_smi_init+0xc60/0x11e0 sp=e0000002ff9f7dd0 bsp=e0000002ff9f0c50 [<a000000100594900>] init_ipmi_si+0xaa0/0x12e0 sp=e0000002ff9f7de0 bsp=e0000002ff9f0bd8 [<a000000100009910>] init+0x350/0x780 sp=e0000002ff9f7e00 bsp=e0000002ff9f0ba8 [<a000000100011d30>] kernel_thread_helper+0x30/0x60 sp=e0000002ff9f7e30 bsp=e0000002ff9f0b80 [<a0000001000090c0>] start_kernel_thread+0x20/0x40 sp=e0000002ff9f7e30 bsp=e0000002ff9f0b80 The root cause is the device struct is initialized twice. If the device is allocated dynamically by platform_device_alloc, platform_device_alloc will initialize struct device, then, platform_device_add should be used to register the device. The difference between platform_device_register and platform_device_add is platform_device_register will initiate the device while platform_device_add won't. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Cc: Corey Minyard <minyard@acm.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-15[TG3]: Disable TSO on 5906 if CLKREQ is enabled.Michael Chan
Due to hardware errata, TSO must be disabled if the PCI Express clock request is enabled on 5906. The chip may hang when transmitting TSO frames if CLKREQ is enabled. Update version to 3.69. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15[TG3]: Increase 5906 firmware poll time.Gary Zambrano
Newer 5906 bootcode needs about 7ms to finish resetting so the poll firmware loop was changed to maximum 20ms. Signed-off-by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15[PATCH] powerpc: windfarm shall request it's sub modulesBenjamin Herrenschmidt
The windfarm code, in it's current incarnation, uses request_module() to load the various submodules it needs for a given platform so that only the main platform control module needs to be modprobed. However, it was missing various bits. This fixes it. In the future, we'll use some hotplug mecanisms to try to get all of this auto-loaded on the platforms where it matters but that isn't ready yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14[PATCH] Char: isicom, fix close bugJiri Slaby
port is dereferenced even if it is NULL. Dereference it _after_ the check if (!port)... Thanks Eric <ef87@yahoo.com> for reporting this. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7527 Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix double-completion on error [PATCH] pata_artop: fix "& (1 >>" typo [PATCH] hpt37x: Check the enablebits
2006-11-14[PATCH] cpqarray: fix iostatJens Axboe
cpqarray needs to call disk_stat_add() for iostat to work. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14[PATCH] cciss: fix iostatJens Axboe
cciss needs to call disk_stat_add() for iostat to work. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14[PATCH] libata: Convert from module_init to subsys_initcallBrian King
When building a monolithic kernel, the load order of drivers does not work for SAS libata users, resulting in a kernel oops. Convert libata to use subsys_initcall instead of module_init, which ensures that libata gets loaded before any LLDD. This is the same thing that scsi core does to solve the problem. The load order problem was observed on ipr SAS adapters and should exist for other SAS users as well. Signed-off-by: Brian King <brking@us.ibm.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14[PATCH] nvidiafb: fix unreachable code in nv10GetConfigNathan Lynch
Fix binary/logical operator typo which leads to unreachable code. Noticed while looking at other issues; I don't have the relevant hardware to test this. Signed-off-by: Nathan Lynch <ntl@pobox.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14[PATCH] drivers/ide: stray bracketNicolas Kaiser
Stray bracket in debug code. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14[PATCH] revert "PCI: quirk for IBM Dock II cardbus controllers"Andrew Morton
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7264 We need to target this quirk a little more tightly, using the T20 DMI string. Cc: Pavel Kysilka <goldenfish@bsys.cz> Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14libata: fix double-completion on errorDarrick J. Wong
A curious thing happens, however, when ata_qc_new_init fails to get an ata_queued_cmd: First, ata_qc_new_init handles the failure like this: cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); done(cmd); Then, we return to ata_scsi_translate and do this: err_mem: cmd->result = (DID_ERROR << 16); done(cmd); It appears to me that first we set a status code indicating that we're ok but the device queue is full and finish the command, but then we blow away that status code and replace it with an error flag and finish the command a second time! That does not seem to be desirable behavior since we merely want the I/O to wait until a command slot frees up, not send errors up the block layer. In the err_mem case, we should simply exit out of ata_scsi_translate instead. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14[PATCH] pata_artop: fix "& (1 >>" typoAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14[PATCH] hpt37x: Check the enablebitsAlan Cox
Helps for PATA but SATA bridged devices lie and always set all the bits so will need the error handling fixes from Tejun. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: MMC: Do not set unsupported bits in OCR response MMC: Poll card status after rescanning cards
2006-11-13Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: Fix race between cancel and receive completion RDMA/amso1100: Fix && typo RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_device IB/ehca: Activate scaling code by default IB/ehca: Use named constant for max mtu IB/ehca: Assure 4K alignment for firmware control blocks
2006-11-13[dvb saa7134] Fix missing 'break' for avermedia card caseLinus Torvalds
Commit 450efcfd2e1d941e302a8c89322fbfcef237be98 broke Avermedia 777 support. Added obvious missing "break" statement. Cc: José Suárez <j.suarez.agapito@gmail.com> Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] ide-cd: only set rq->errors SCSI style for block pc requestsJens Axboe
We should only set ->errors to CHECK_CONDITION and so on for requests that use this field in the SCSI manner. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13IB/mad: Fix race between cancel and receive completionRoland Dreier
When ib_cancel_mad() is called, it puts the canceled send on a list and schedules a "flushed" callback from process context. However, this leaves a window where a receive completion could be processed before the send is fully flushed. This is fine, except that ib_find_send_mad() will find the MAD and return it to the receive processing, which results in the sender getting both a successful receive and a "flushed" send completion for the same request. Understandably, this confuses the sender, which is expecting only one of these two callbacks, and leads to grief such as a use-after-free in IPoIB. Fix this by changing ib_find_send_mad() to return a send struct only if the status is still successful (and not "flushed"). The search of the send_list already had this check, so this patch just adds the same check to the search of the wait_list. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13RDMA/amso1100: Fix && typoJean Delvare
Fix the AMSO1100 firmware version computation, which was broken due to "&&" being used where "&" should have. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_deviceTom Tucker
Rework some load-time error handling: c2_register_device() leaked when it failed, and the function that called it didn't check the return code. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13IB/ehca: Activate scaling code by defaultHoang-Nam Nguyen
Change ehca's Kconfig to activates scaling code as default. After several measurements we saw that this feature prevents dropped packets (UD) in stress situation. Thus, enabling it helps to improve ehca's bandwidth through IPoIB. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13IB/ehca: Use named constant for max mtuHoang-Nam Nguyen
Define and use a constant EHCA_MAX_MTU instead hardcoded value. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4818): Flexcop-usb: fix debug printk V4L/DVB (4817): Fix uses of "&&" where "&" was intended V4L/DVB (4816): Change tuner type for Avermedia A16AR V4L/DVB (4815): Remote support for Avermedia A16AR V4L/DVB (4814): Remote support for Avermedia 777 V4L/DVB (4804): Fix missing i2c dependency for saa7110 V4L/DVB (4802): Cx88: fix remote control on WinFast 2000XP Expert V4L/DVB (4795): Tda826x: use correct max frequency
2006-11-13Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] cell: set ARCH_SPARSEMEM_DEFAULT in Kconfig [POWERPC] Fix cell "new style" mapping and add debug [POWERPC] pseries: Force 4k update_flash block and list sizes [POWERPC] CPM_UART: Fix non-console initialisation [POWERPC] CPM_UART: Fix non-console transmit [POWERPC] Make sure initrd and dtb sections get into zImage correctly
2006-11-13Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] drivers cris: return on NULL dev_alloc_skb() [PATCH] com20020 build fix [PATCH] bonding: lockdep annotation [PATCH] bcm43xx: Add error checking in bcm43xx_sprom_write() [PATCH] bcm43xx: Drain TX status before starting IRQs
2006-11-13[PATCH] SCSI core: always store >= 36 bytes of INQUIRY dataAlan Stern
This patch (as810c) copies a minimum of 36 bytes of INQUIRY data, even if the device claims that not all of them are valid. Often badly behaved devices put plausible data in the Vendor, Product, and Revision strings but set the Additional Length byte to a small value. Using potentially valid data is certainly better than allocating a short buffer and then reading beyond the end of it, which is what we do now. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] Patch for nvidia divide by zero error for 7600 pci-express cardWink Saville
The following patch resolves the divide by zero error I encountered on my system: http://marc.10east.com/?l=linux-fbdev-devel&m=116058257024413&w=2 I accomplished this by merging what I thought was appropriate from: http://webcvs.freedesktop.org/xorg/driver/xf86-video-nv/src/ Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] IPMI: Fix more && typosCorey Minyard
Fix improper use of "&&" when "&" was intended. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] mspec driver build fixJes Sorensen
Fix MSPEC driver to build for non SN2 enabled configs as the driver should work in cached and uncached modes (no fetchop) on these systems. In addition make MSPEC select IA64_UNCACHED_ALLOCATOR, which is required for it and move it to arch/ia64/Kconfig to avoid warnings on non ia64 architectures running allmodconfig. Once the Kconfig code is fixed, we can move it back. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Fernando Luis Vzquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] pci: don't try to remove sysfs files before they are setup.David Miller
The PCI sysfs attributes are created after the initial PCI bus scan. With the addition of more return value checking and assertions in the device and sysfs layers we now can get dumps like this on sparc64: [ 20.135032] Call Trace: [ 20.135042] [0000000000537f88] pci_remove_bus_device+0x30/0xc0 [ 20.135076] [000000000078f890] pci_fill_in_pbm_cookies+0x98/0x440 [ 20.135109] [000000000042e828] sabre_scan_bus+0x230/0x400 [ 20.135139] [000000000078c710] pcibios_init+0x58/0xa0 [ 20.135159] [0000000000416f14] init+0x9c/0x2e0 [ 20.135190] [0000000000417a50] kernel_thread+0x38/0x60 [ 20.135211] [0000000000417170] rest_init+0x18/0x40 [ 20.135514] PCI0(PBMB): Bus running at 33MHz It's triggering because removal of the "config" PCI sysfs file for the device fails. On sparc64, after probing the device, we'll delete the PCI device via pci_remove_bus_device() if we cannot find the firmware device tree node corresponding to it. This is fine, but at this point the sysfs files for the PCI device won't be setup yet. So we should not try to do anything in pci_remove_sysfs_dev_files() if pci_sysfs_init() has not run yet. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13V4L/DVB (4818): Flexcop-usb: fix debug printkAlexey Dobriyan
.. fix debug printk. Why, oh why, one would want to do (u16 & 0xff) << 8 and print it with %02x format? Acked-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13V4L/DVB (4817): Fix uses of "&&" where "&" was intendedJean Delvare
Fix uses of "&&" where "&" was intended in bttv-cards.c and tveeprom.c Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13V4L/DVB (4816): Change tuner type for Avermedia A16ARpasky@ucw.cz
This changes it from TDA8290 which is allegedly very unlikely to TD1316 which is allegedly very likely. I didn't get it to work with either, but expected that this got applied when Mauro sent it to me, so here it goes again; feel free to drop it to the floor. :-) Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13V4L/DVB (4815): Remote support for Avermedia A16ARpasky@ucw.cz
The remote as well as the GPIO interface is the same as what comes with 777. For an example of mplayer lirc configuration, see http://pasky.or.cz/~pasky/dev/v4l/lircrc Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13V4L/DVB (4814): Remote support for Avermedia 777pasky@ucw.cz
I didn't test it personally since I don't have this card, but A16AR uses the same interface and that one certainly does work perfectly (see the next patch). This patch was originally sent in http://marc.theaimsgroup.com/?l=linux-video&m=114743413825375&w=2 https://www.redhat.com/mailman/private/video4linux-list/2006-May/msg00103.html but never got applied. This version has some trivial modifications and drops the weird gpio hack (it's not clear what practical purpose does it serve). Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13V4L/DVB (4804): Fix missing i2c dependency for saa7110Mauro Carvalho Chehab
drivers/media/video/saa7110.c:112: undefined reference to `i2c_master_send' drivers/built-in.o: In function `saa7110_read': drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte' drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte' Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 12:34:37 +0000