aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-04-21IB/ipath: Correct capitalization "IntX" -> "INTx"Roland Dreier
Match what the PCI specification uses. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Remove tests of PCI_MSI in ipath_iba7220.cRoland Dreier
The PCI MSI interface is stubbed out properly so that all the functions just return failure if PCI_MSI=n, so there's no reason to have "#ifdef CONFIG_PCI_MSI" blocks in ipath_iba7220.c. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Remove dependency on PCI_MSI || HT_IRQRoland Dreier
Before IBA7220 support was added, the ipath driver didn't support any hardware unless PCI_MSI and/or HT_IRQ was enabled. However, the IBA7220 can generate INTx interrupts, so it makes sense to allow the driver to be build even if PCI_MSI=n and HT_IRQ=n. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Build IBA7220 code unconditionallyRoland Dreier
The new IBA7220 code added a call to ipath_init_iba7220_funcs() that is compiled unconditionally, but only built the IBA7220 code if PCI_MSI is enabled. Fix this by building the IBA7220 file unconditonally. This fixes build breakage when PCI_MSI=n, HT_IRQ=y and INFINIBAND_IPATH=y reported by Ingo Molnar <mingo@elte.hu>: drivers/built-in.o: In function `ipath_init_one': ipath_driver.c:(.devinit.text+0x1e5bc): undefined reference to `ipath_init_iba7220_funcs' Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Remove reference to dev->class_dev ↵Roland Dreier
Commit 124b4dcb ("IB/ipath: add calls to new 7220 code and enable in build") inadvertently added core to set dev->class_dev.dev back into ib_ipath. This is completely redundant since commit 1912ffbb ("IB: Set class_dev->dev in core for nice device symlink"), which removed class_dev setting from low-level drivers, and also will break the build when class_dev is removed completely from struct ib_device. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Fix module parameter description for disable_smaPaul Bolle
Describe disable_sma parameter with its name rather than the internal ib_ipath_disable_sma variable name, so that the description shows up properly in modinfo. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21RDMA/nes: Remove unneeded function declarationsRoland Dreier
Remove redundant static declarations of functions that are defined before they are used in the source. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (26 commits) mmc: sdio_ops.c should #include "sdio_ops.h" mmc: proper prototypes for mmc_attach_*() mmc: make __mmc_release_bus() static sdhci: improve no card, no reset quirk MMC: OMAP: Do not busy wait for end of command for ever MMC: OMAP: Start new commands from work queue instead of irq MMC: OMAP: Lazy clock shutdown MMC: OMAP: Move failing command abortion to workqueue MMC: OMAP: Use tasklet instead of workqueue for cover switch notification MMC: OMAP: Check the get_cover_state function pointer if not set MMC: OMAP: Using setup_timer instead of init_timer MMC: OMAP: Abort stuck commands MMC: OMAP: General cleanup for MMC multislot support MMC: OMAP: Power functions modified to MMC multislot support MMC: OMAP: Fix timeout calculation for MMC multislot support MMC: OMAP: New release dma and abort xfer functions MMC: OMAP: Add back cover switch support MMC: OMAP: Introduce new multislot structure and change driver to use it MMC: OMAP: Remove cover switch handling to allow adding multislot support MMC: OMAP: Fix the BYTEBLOCK capability removal ...
2008-04-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial: (24 commits) DOC: A couple corrections and clarifications in USB doc. Generate a slightly more informative error msg for bad HZ fix typo "is" -> "if" in Makefile ext*: spelling fix prefered -> preferred DOCUMENTATION: Use newer DEFINE_SPINLOCK macro in docs. KEYS: Fix the comment to match the file name in rxrpc-type.h. RAID: remove trailing space from printk line DMA engine: typo fixes Remove unused MAX_NODES_SHIFT MAINTAINERS: Clarify access to OCFS2 development mailing list. V4L: Storage class should be before const qualifier (sn9c102) V4L: Storage class should be before const qualifier sonypi: Storage class should be before const qualifier intel_menlow: Storage class should be before const qualifier DVB: Storage class should be before const qualifier arm: Storage class should be before const qualifier ALSA: Storage class should be before const qualifier acpi: Storage class should be before const qualifier firmware_sample_driver.c: fix coding style MAINTAINERS: Add ati_remote2 driver ... Fixed up trivial conflicts in firmware_sample_driver.c
2008-04-21Merge branch 'for-2.6.26' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block: block: fix blk_register_queue() return value block: fix memory hotplug and bouncing in block layer block: replace remaining __FUNCTION__ occurrences Kconfig: clean up block/Kconfig help descriptions cciss: fix warning oops on rmmod of driver cciss: Fix race between disk-adding code and interrupt handler block: move the padding adjustment to blk_rq_map_sg block: add bio_copy_user_iov support to blk_rq_map_user_iov block: convert bio_copy_user to bio_copy_user_iov loop: manage partitions in disk image cdrom: use kmalloced buffers instead of buffers on stack cdrom: make unregister_cdrom() return void cdrom: use list_head for cdrom_device_info list cdrom: protect cdrom_device_info list by mutex cdrom: cleanup hardcoded error-code cdrom: remove ifdef CONFIG_SYSCTL
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits) PCI: Change PCI subsystem MAINTAINER PCI: pci-iommu-iotlb-flushing-speedup PCI: pci_setup_bridge() mustn't be __devinit PCI: pci_bus_size_cardbus() mustn't be __devinit PCI: pci_scan_device() mustn't be __devinit PCI: pci_alloc_child_bus() mustn't be __devinit PCI: replace remaining __FUNCTION__ occurrences PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno() PCI: clean up resource alignment management PCI: aerdrv_acpi.c: remove unneeded NULL check PCI: Update VIA CX700 quirk PCI: Expose PCI VPD through sysfs PCI: iommu: iotlb flushing PCI: simplify quirk debug output PCI: iova RB tree setup tweak PCI: parisc: use generic pci_enable_resources() PCI: ppc: use generic pci_enable_resources() PCI: powerpc: use generic pci_enable_resources() PCI: ia64: use generic pci_enable_resources() ...
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [HWRNG] omap: Minor updates [CRYPTO] kconfig: Ordering cleanup [CRYPTO] all: Clean up init()/fini() [CRYPTO] padlock-aes: Use generic setkey function [CRYPTO] aes: Export generic setkey [CRYPTO] api: Make the crypto subsystem fully modular [CRYPTO] cts: Add CTS mode required for Kerberos AES support [CRYPTO] lrw: Replace all adds to big endians variables with be*_add_cpu [CRYPTO] tcrypt: Change the XTEA test vectors [CRYPTO] tcrypt: Shrink the tcrypt module [CRYPTO] tcrypt: Change the usage of the test vectors [CRYPTO] api: Constify function pointer tables [CRYPTO] aes-x86-32: Remove unused return code [CRYPTO] tcrypt: Shrink speed templates [CRYPTO] tcrypt: Group common speed templates [CRYPTO] sha512: Rename sha512 to sha512_generic [CRYPTO] sha384: Hardware acceleration for s390 [CRYPTO] sha512: Hardware acceleration for s390 [CRYPTO] s390: Generic sha_update and sha_final [CRYPTO] api: Switch to proc_create()
2008-04-21Merge branch 'irq-cleanups-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'irq-cleanups-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [ISDN] minor irq handler cleanups drivers/char: minor irq handler cleanups [PPC] minor irq handler cleanups [BLACKFIN] minor irq handler cleanups [SPARC] minor irq handler cleanups ARM minor irq handler cleanup: avoid passing unused info to irq
2008-04-21Merge branch 'isdn-cleanups' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'isdn-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [ISDN] Hisax: eliminate many unnecessary references to CardType[] [ISDN] HiSax: modularization prep
2008-04-21Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits) [POWERPC] Fix compile breakage for 64-bit UP configs [POWERPC] Define copy_siginfo_from_user32 [POWERPC] Add compat handler for PTRACE_GETSIGINFO [POWERPC] i2c: Fix build breakage introduced by OF helpers [POWERPC] Optimize fls64() on 64-bit processors [POWERPC] irqtrace support for 64-bit powerpc [POWERPC] Stacktrace support for lockdep [POWERPC] Move stackframe definitions to common header [POWERPC] Fix device-tree locking vs. interrupts [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const [POWERPC] Remove unused __max_memory variable [POWERPC] Simplify xics direct/lpar irq_host setup [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ() [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade() [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c [POWERPC] Use asm-generic/bitops/find.h in bitops.h [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup [POWERPC] 85xx: Fix the size of qe muram for MPC8568E [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier. [POWERPC] 86xx: mark functions static, other minor cleanups ...
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) SCSI: convert struct class_device to struct device DRM: remove unused dev_class IB: rename "dev" to "srp_dev" in srp_host structure IB: convert struct class_device to struct device memstick: convert struct class_device to struct device driver core: replace remaining __FUNCTION__ occurrences sysfs: refill attribute buffer when reading from offset 0 PM: Remove destroy_suspended_device() Firmware: add iSCSI iBFT Support PM: Remove legacy PM (fix) Kobject: Replace list_for_each() with list_for_each_entry(). SYSFS: Explicitly include required header file slab.h. Driver core: make device_is_registered() work for class devices PM: Convert wakeup flag accessors to inline functions PM: Make wakeup flags available whenever CONFIG_PM is set PM: Fix misuse of wakeup flag accessors in serial core Driver core: Call device_pm_add() after bus_add_device() in device_add() PM: Handle device registrations during suspend/resume block: send disk "change" event for rescan_partitions() sysdev: detect multiple driver registrations ... Fixed trivial conflict in include/linux/memory.h due to semaphore header file change (made irrelevant by the change to mutex).
2008-04-21Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: rose: Socket lock was not released before returning to user space hci_usb: remove code obfuscation drivers/net/appletalk: use time_before, time_before_eq, etc drivers/atm: use time_before, time_before_eq, etc hci_usb: do not initialize static variables to 0 tg3: 5701 DMA corruption fix atm nicstar: Removal of debug code containing deprecated calls to cli()/sti() iwlwifi: Fix unconditional access to station->tidp[].agg. netfilter: Fix SIP conntrack build with NAT disabled. netfilter: Fix SCTP nat build.
2008-04-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: (25 commits) avr32: Add hardware power-down function call avr32: add include/asm-avr32/serial.h avr32: don't offer PARPORT_PC avr32: don't offer CONFIG_GEN_RTC avr32: don't offer CONFIG_RTC add include/asm-avr32/xor.h avr32: Remove two unused #defines from mm/init.c avr32: Implement set_rate(), set_parent() and mode() for pll1 avr32: Generic clockevents support avr32: Move sleep code into mach-at32ap avr32: Use constants from sysreg.h in asm.h avr32: Delete mostly unused header asm/intc.h avr32: start clocksource cleanup avr32: pass i2c board info through at32_add_device_twi avr32: cleanup - use _AC macro to define PAGE_SIZE Generate raw keyboard codes for AVR32 architecture atmel_usba_udc: Add support for AT91CAP9 UDPHS atmel_usba_udc: Add missing kfree() in usba_udc_remove() atmel_usba_udc: move endpoint declarations into platform data. atmel_usba_udc: Kill GPIO_PIN_NONE ...
2008-04-21RAID: remove trailing space from printk lineNick Andrew
drivers/md/*.[ch] contains only one more printk line with a trailing space. Remove it. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21Merge branch 'semaphore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: Deprecate the asm/semaphore.h files in feature-removal-schedule. Convert asm/semaphore.h users to linux/semaphore.h security: Remove unnecessary inclusions of asm/semaphore.h lib: Remove unnecessary inclusions of asm/semaphore.h kernel: Remove unnecessary inclusions of asm/semaphore.h include: Remove unnecessary inclusions of asm/semaphore.h fs: Remove unnecessary inclusions of asm/semaphore.h drivers: Remove unnecessary inclusions of asm/semaphore.h net: Remove unnecessary inclusions of asm/semaphore.h arch: Remove unnecessary inclusions of asm/semaphore.h
2008-04-21Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (212 commits) [ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver [ARM] pxa: V4L2 soc_camera driver for PXA270 [ARM] pxa: restrict availability of pxa2xx PCMCIA drivers [ARM] 5005/1: BAST: Fix kset_name initialiser [ARM] 4967/1: Adds functions to set clkout rate for Samsung S3C2410 [ARM] 4988/1: Add GPIO lib support to the EP93xx [ARM] Add initial sparsemem support [ARM] pxa: initialise PXA devices before platform init code [ARM] 5002/1: tosa: add two more leds [ARM] 5004/1: Tosa: make several unreferenced structures static. [ARM] 5003/1: Shut up sparse warnings [ARM] 4977/2: soc - pxa2xx-ac97 - Add missing clk_enable() [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line [ARM] 4974/1: Drop unused leds-tosa. [ARM] 4973/1: Tosa: use leds-gpio driver. [ARM] 4972/1: Tosa: convert scoop GPIOs usage to generic gpio code [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks [ARM] pxa: lubbock: move mis-placed SPI info [ARM] 4970/1: tosa: correct gpio used for wake up. [ARM] 4966/1: magician: add MFP pin configuration ...
2008-04-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel: (62 commits) sched: build fix sched: better rt-group documentation sched: features fix sched: /debug/sched_features sched: add SCHED_FEAT_DEADLINE sched: debug: show a weight tree sched: fair: weight calculations sched: fair-group: de-couple load-balancing from the rb-trees sched: fair-group scheduling vs latency sched: rt-group: optimize dequeue_rt_stack sched: debug: add some debug code to handle the full hierarchy sched: fair-group: SMP-nice for group scheduling sched, cpuset: customize sched domains, core sched, cpuset: customize sched domains, docs sched: prepatory code movement sched: rt: multi level group constraints sched: task_group hierarchy sched: fix the task_group hierarchy for UID grouping sched: allow the group scheduler to have multiple levels sched: mix tasks and groups ...
2008-04-21DMA engine: typo fixesSebastian Siewior
Spelling fixes for dmaengine.[ch] Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (27 commits) sh: Fix up L2 cache probe. sh: Fix up SH-4A part probe. sh: Add support for SH7723 CPU subtype. sh: Fix up SH7763 build. sh: Add migor_ts support to MigoR sh: Add rs5c732b RTC support to MigoR sh: Add I2C support to MigoR sh: Add I2C platform data to sh7722 sh: MigoR NAND flash support using gen_flash sh: MigoR NOR flash support using physmap-flash sh: Fix up mach-types formatting from merge damage. sh: r7780rp: Hook up the I2C and SMBus platform devices. sh: Use phyical addresses for MigoR smc91x resources sh: Use physical addresses for sh7722 USBF resources sh: Add MigoR header file Fix sh_keysc double free sh: Fix up __access_ok() check for nommu. sh: Allow optimized clear/copy page routines to be used on SH-2. sh: Hook up the rest of the SH7770 serial ports. sh: Add support for Solution Engine SH7721 board ...
2008-04-21V4L: Storage class should be before const qualifier (sn9c102)Tobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21V4L: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21sonypi: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21intel_menlow: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21DVB: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21acpi: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21block: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cciss: fix warning oops on rmmod of driverscameron@beardog.cca.cpqcorp.net
* Fix oops on cciss rmmod due to calling pci_free_consistent with irqs disabled. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cciss: Fix race between disk-adding code and interrupt handlerscameron@beardog.cca.cpqcorp.net
Fix race condition between cciss_init_one(), cciss_update_drive_info(), and cciss_check_queues(). Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21block: move the padding adjustment to blk_rq_map_sgFUJITA Tomonori
blk_rq_map_user adjusts bi_size of the last bio. It breaks the rule that req->data_len (the true data length) is equal to sum(bio). It broke the scsi command completion code. commit e97a294ef6938512b655b1abf17656cf2b26f709 was introduced to fix the above issue. However, the partial completion code doesn't work with it. The commit is also a layer violation (scsi mid-layer should not know about the block layer's padding). This patch moves the padding adjustment to blk_rq_map_sg (suggested by James). The padding works like the drain buffer. This patch breaks the rule that req->data_len is equal to sum(sg), however, the drain buffer already broke it. So this patch just restores the rule that req->data_len is equal to sub(bio) without breaking anything new. Now when a low level driver needs padding, blk_rq_map_user and blk_rq_map_user_iov guarantee there's enough room for padding. blk_rq_map_sg can safely extend the last entry of a scatter list. blk_rq_map_sg must extend the last entry of a scatter list only for a request that got through bio_copy_user_iov. This patches introduces new REQ_COPY_USER flag. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tejun Heo <htejun@gmail.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21loop: manage partitions in disk imageLaurent Vivier
This patch allows to use loop device with partitionned disk image. Original behavior of loop is not modified. A new parameter is introduced to define how many partition we want to be able to manage per loop device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: # modprobe loop max_part=63 # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 And to attach a raw partitionned disk image, the original losetup is used: # losetup -f etch.img # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 1 2008-03-05 14:57 /dev/loop0p1 brw-rw---- 1 root disk 7, 2 2008-03-05 14:57 /dev/loop0p2 brw-rw---- 1 root disk 7, 5 2008-03-05 14:57 /dev/loop0p5 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 # mount /dev/loop0p1 /mnt # ls /mnt bench cdrom home lib mnt root srv usr bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz # umount /mnt # losetup -d /dev/loop0 Of course, the same behavior can be done using kpartx on a loop device, but modifying loop avoids to stack several layers of block device (loop + device mapper), this is a very light modification (40% of modifications are to manage the new parameter). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cdrom: use kmalloced buffers instead of buffers on stackThomas Bogendoerfer
If cdrom commands are issued to a scsi drive in most cases the buffer will be filled via dma. This leads to bad stack corruption on non coherent platforms, because the buffers are neither cache line aligned nor is the size a multiple of the cache line size. Using kmalloced buffers avoids this. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cdrom: make unregister_cdrom() return voidAkinobu Mita
Now unregister_cdrom() always returns 0. Make it return void and update all callers that check the return value. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cdrom: use list_head for cdrom_device_info listAkinobu Mita
Use list_head for cdrom_device_info list instead of opencoded singly list handling. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cdrom: protect cdrom_device_info list by mutexAkinobu Mita
This patch protects the list of cdrom_device_info by cdrom_mutex when the file in /proc/sys/dev/cdrom/ is written. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cdrom: cleanup hardcoded error-codeAkinobu Mita
This patch eliminates hardcoded return value of register_cdrom(). It also changes the return value to -EINVAL. It is more appropriate than -2 (-ENOENT) because it is only happen invalid usage of register_cdrom() by broken cdrom driver. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cdrom: remove ifdef CONFIG_SYSCTLAkinobu Mita
This patch removes #ifdef for CONFIG_SYSCTL by defining empty cdrom_sysctl_register and cdrom_sysctl_unregister when CONFIG_SYSCTL is not defined. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-20PCI: pci-iommu-iotlb-flushing-speedupmark gross
The following patch is an update to use an array instead of a list of IOVA's in the implementation of defered iotlb flushes. It takes inspiration from sba_iommu.c I like this implementation better as it encapsulates the batch process within intel-iommu.c, and no longer touches iova.h (which is shared) Performance data: Netperf 32byte UDP streaming 2.6.25-rc3-mm1: IOMMU-strict : 58Mps @ 62% cpu NO-IOMMU : 71Mbs @ 41% cpu List-based IOMMU-default-batched-IOTLB flush: 66Mbps @ 57% cpu with this patch: IOMMU-strict : 73Mps @ 75% cpu NO-IOMMU : 74Mbs @ 42% cpu Array-based IOMMU-default-batched-IOTLB flush: 72Mbps @ 62% cpu Signed-off-by: <mgross@linux.intel.com> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pci_setup_bridge() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0x28ee9): Section mismatch in reference from the function pci_bus_assign_resources() to the function .devinit.text:pci_setup_bridge() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pci_bus_size_cardbus() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0x28e1f): Section mismatch in reference from the function pci_bus_size_bridges() to the function .devinit.text:pci_bus_size_cardbus() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pci_scan_device() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0x150f): Section mismatch in reference from the function pci_scan_single_device() to the function .devinit.text:pci_scan_device() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pci_alloc_child_bus() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0xc4c): Section mismatch in reference from the function pci_add_new_bus() to the function .devinit.text:pci_alloc_child_bus() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggeredTrent Piepho
The 'power' attribute of the fakephp driver originally only let one turn a slot off. If one tried to turn a slot on (echo 1 > .../power), it would return ENODEV, as fakephp did not support this function. An old (pre-git) patch changed this: 2004/11/11 16:33:31-08:00 jdittmer [PATCH] fakephp: add pci bus rescan ability http://article.gmane.org/gmane.linux.kernel/251183 Now writing "1" to the power attribute has the effect of triggering a bus rescan, but it still returns ENODEV, probably an oversight in the above patch. Using the BusyBox echo will not produce an error message, but will trigger *two* bus rescans (and return an exit code of 1): ~ # strace echo -n 1 > /sys/bus/pci/slots/0000:00:00.0/power ... write(1, "1", 1) = -1 ENODEV (No such device) write(1, "1", 1) = -1 ENODEV (No such device) exit(1) = ? Using cp gives a write error, even though the write did happen and a rescan was triggered: ~ # echo -n 1 > tmp ; cp tmp /sys/bus/pci/slots/0000:00:00.0/power cp: Write Error: No such device It seems much better to return success instead of failure. The actual status of the bus rescan is hard to return. It happens asynchronously in a work thread, so the sysfs store functions returns before any status is ready (the whole point of the work queue). And even if it didn't do this, the rescan doesn't have any clear status to return. Signed-off-by: Trent Piepho <tpiepho@freescale.com> CC: Jan Dittmer <jdittmer@ppp0.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno()Jesper Juhl
In drivers/pci/hotplug/ibmphp_core.c::ibmphp_init_devno() we allocate space dynamically for a PCI irq routing table by calling pcibios_get_irq_routing_table(), but we never free the allocated space. This patch frees the allocated space at the function exit points. Spotted by the Coverity checker. Compile tested only. Please consider applying. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: clean up resource alignment managementIvan Kokshaysky
Done per Linus' request and suggestions. Linus has explained that better than I'll be able to explain: On Thu, Mar 27, 2008 at 10:12:10AM -0700, Linus Torvalds wrote: > Actually, before we go any further, there might be a less intrusive > alternative: add just a couple of flags to the resource flags field (we > still have something like 8 unused bits on 32-bit), and use those to > implement a generic "resource_alignment()" routine. > > Two flags would do it: > > - IORESOURCE_SIZEALIGN: size indicates alignment (regular PCI device > resources) > > - IORESOURCE_STARTALIGN: start field is alignment (PCI bus resources > during probing) > > and then the case of both flags zero (or both bits set) would actually be > "invalid", and we would also clear the IORESOURCE_STARTALIGN flag when we > actually allocate the resource (so that we don't use the "start" field as > alignment incorrectly when it no longer indicates alignment). > > That wouldn't be totally generic, but it would have the nice property of > automatically at least add sanity checking for that whole "res->start has > the odd meaning of 'alignment' during probing" and remove the need for a > new field, and it would allow us to have a generic "resource_alignment()" > routine that just gets a resource pointer. Besides, I removed IORESOURCE_BUS_HAS_VGA flag which was unused for ages. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>