aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-06-17Merge branch 'for-2.6.27' of git://git.marvell.com/mv643xx_eth into ↵Jeff Garzik
upstream-next
2008-06-17atl1: relax eeprom mac address error checkRadu Cristescu
The atl1 driver tries to determine the MAC address thusly: - If an EEPROM exists, read the MAC address from EEPROM and validate it. - If an EEPROM doesn't exist, try to read a MAC address from SPI flash. - If that fails, try to read a MAC address directly from the MAC Station Address register. - If that fails, assign a random MAC address provided by the kernel. We now have a report of a system fitted with an EEPROM containing all zeros where we expect the MAC address to be, and we currently handle this as an error condition. Turns out, on this system the BIOS writes a valid MAC address to the NIC's MAC Station Address register, but we never try to read it because we return an error when we find the all- zeros address in EEPROM. This patch relaxes the error check and continues looking for a MAC address even if it finds an illegal one in EEPROM. Signed-off-by: Radu Cristescu <advantis@gmx.net> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17net/enc28j60: low power modeDavid Brownell
Keep enc28j60 chips in low-power mode when they're not in use. At typically 120 mA, these chips run hot even when idle; this low power mode cuts that power usage by a factor of around 100. This version provides a generic routine to poll a register until its masked value equals some value ... e.g. bit set or cleared. It's basically what the previous wait_phy_ready() did, but this version is generalized to support the handshaking needed to enter and exit low power mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17net/enc28j60: section fixDavid Brownell
Minor bugfixes to the enc28j60 driver ... wrong section marking, indentation, and bogus use of spi_bus_type. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17sky2: 88E8040T pci device idStephen Hemminger
Missed one pci id for 88E8040T. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: download firmware in pci probeDhananjay Phadke
Downloading firmware in pci probe allows recovery in case of firmware failure by reloading the driver. Also reduced delays in firmware load. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: cleanup debug messagesDhananjay Phadke
o Remove unnecessary debug prints and functions. o Explicitly specify pci class (0x020000) to avoid enabling management function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: remove global physical_port arrayDhananjay Phadke
Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: fix portnum for hp mezz cardsDhananjay Phadke
This fixes a the issue where logical port number is set incorrectly for HP blade mezz cards. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17ibm_newemac: select CRC32 in KconfigJosh Boyer
The ibm_newemac driver requires ether_crc to be defined. Apparently it is possible to generate a .config without CONFIG_CRC32 set which causes the following link errors if IBM_NEW_EMAC is selected: LD .tmp_vmlinux1 drivers/built-in.o: In function `emac_hash_mc': core.c:(.text+0x2f524): undefined reference to `crc32_le' core.c:(.text+0x2f528): undefined reference to `bitrev32' make: *** [.tmp_vmlinux1] Error 1 This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17atm: [fore200e] convert to use request_firmware()Chas Williams
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17atm: [he] remove #ifdef clutterChas Williams
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17atm: [iphase] 64-bit cleanupAlan Cox
This fixes the most obvious 64-bit problems, but it is still very very broken in other aspects. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17atm: [suni] add support for setting loopback and framing modesChas Williams
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17atm: [iphase] move struct suni_priv to suni.hJorge Boncompte [DTI2]
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/rt2x00/Kconfig drivers/net/wireless/rt2x00/rt2x00usb.c net/sctp/protocol.c
2008-06-16atm: [he] send idle cells instead of unassigned when in SDH modeChas Williams
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16atm: [he] limit queries to the device's register spaceRobert T. Johnson
From: "Robert T. Johnson" <rtjohnso@eecs.berkeley.edu> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
2008-06-16atm: [he] only support suni driver on multimode interfacesChas Williams
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16atm: [iphase] doesn't call phy->start due to a bogus #ifndefJorge Boncompte [DTI2]
This causes the suni driver to oops if you try to use sonetdiag to get the statistics. Also add the corresponding phy->stop call to fix another oops if you try to remove the module. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16atm: [iphase] set drvdata before enabling interruptsJorge Boncompte [DTI2]
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-06-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-06-14mac80211: remove ieee80211_get_morefragHarvey Harrison
Replaced by the new helper ieee80211_has_morefrags which is more consistent with the intent of the function. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14mac80211: add helpers for frame control testingHarvey Harrison
A few general categories: 1) ieee80211_has_* tests if particular fctl bits are set, the helpers are de in the same order as the fctl defines: A combined _has_a4 was also added to test when both FROMDS and TODS are set. 2) ieee80211_is_* is meant to test whether the frame control is of a certain ftype - data, mgmt, ctl, and two special helpers _is_data_qos, _is_data_pres which also test a subset of the stype space. When testing for a particular stype applicable only to one ftype, functions like ieee80211_is_ack have been added. Note that the ftype is also being checked in these helpers. They have been added for all mgmt and ctl stypes in the same order as the STYPE defines. 3) ieee80211_get_* is meant to take a struct ieee80211_hdr * and returns a pointer to somewhere in the struct, see get_SA, get_DA, get_qos_ctl. The intel wireless drivers had helpers that used this namespace, convert the all to use the new helpers and remove the byteshifting as they were defined in cpu-order rather than little-endian. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14mac80211_hwsim: Shared TX code for received frames and BeaconsJouni Malinen
Use a shared function for transmitting the frames instead of duplicated code in two places. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14mac80211_hwsim: Minor cleanupJouni Malinen
Remove unnecessary '__constant_' prefix and use the atomic version of ieee80211_iterate_active_interfaces(). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14mac80211_hwsim: 802.11 radio simulator for mac80211Jouni Malinen
mac80211_hwsim is a Linux kernel module that can be used to simulate arbitrary number of IEEE 802.11 radios for mac80211 on a single device. It can be used to test most of the mac80211 functionality and user space tools (e.g., hostapd and wpa_supplicant) in a way that matches very closely with the normal case of using real WLAN hardware. From the mac80211 view point, mac80211_hwsim is yet another hardware driver, i.e., no changes to mac80211 are needed to use this testing tool. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: unify SW rf-kill flowEmmanuel Grumbach
This patch unifies SW rf-kill flow between 4965 and 5000. It enables SW RF-kill for 5000. This patch also solves a bug in iwl4965_mac_config: bad mutex locking balance. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: remove 4965 prefix from iwl4965_ucodeRon Rindjunsky
The patch removes 4965 prefix from iwl4965_ucode. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: adding channels to sysfsEster Kummer
This patch returns channel list to sysfs. Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: Use kernel-supplied ARRAY_SIZE() macro.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: preallocate command buffer for set/get_oidJussi Kivilinna
Reduce amount of kmalloc/kfree calls in set/get_oid by preallocating command buffer. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: use kzalloc to allocate private dataJussi Kivilinna
rndis_wlan used kmalloc to allocate private data structure and leaving data uninitialized, but later assumed to be set zero. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: remove iwlcore_low_level_notifyEmmanuel Grumbach
This patch removes the iwlcore_low_level_notify. The notification chain is not required in this level. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: general code clean upEmmanuel Grumbach
This patch cleans up iwlwifi's code: Add missing include, remove empty lines etc... Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: fix software rf_kill problem when interface is downZhu Yi
The patch fixes the problem that software rf_kill messes up the card status when it is disabled if the interface is down. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: remove dead code iwl4965_calc_db_from_ratioEmmanuel Grumbach
This patch removes iwl4965_calc_db_from_ratio which is dead code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: retfactor get_temperature functionsEmmanuel Grumbach
This patch renames iwl4965_get_tempearture to iwl4965_hw_get_temperature and replaces usage of original iwl4965_hw_get_temperature by direct access to priv->temperature. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: move iwl4965_rf_kill_ct_config to iwl-core.cEmmanuel Grumbach
This patch moves iwl4965_rf_kill_ct_config to iwl-core.c. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: cleans up scanning codeTomas Winkler
This patch 1. cleans up scanning code. 2. It adds round robin of TX antannas/chains. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: move rate helpers to iwlcoreTomas Winkler
This patch moves rate helpers to iwlcore. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: move scan to iwl-scan.c iwlcoreTomas Winkler
This patch moves scan code to iwl-scan.c file in iwlcore module. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: add bad length check for WEP keysEmmanuel Grumbach
This patch adds a check for bad length in set key flow. This solves the Oops reported by Thomas Backlund, Joonwoo Park and Ian Schram. It also adds some debug printing that can be useful. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: refactor setting tx powerTomas Winkler
This patch 1. Refactors settings of tx power 2. enables iwconfig txpower <value> 3. adds 5000 HW tx power Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: refactor tx aggregation response flowTomas Winkler
This patch refactors tx aggregation respnse flow and fixes bug revealed by tx_info to cb patch Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: Fix mode changes (ad-hoc <--> managed)Assaf Krauss
This fix allows to move between modes (ad-hoc to managed, and vice versa). Since mode changes can only be done while driver is down, check for ibss support can only be made when the channel is set (afte the driver goes up). Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi enabling IBSS (Ad-Hoc) modeAssaf Krauss
This patch enables ibss mode. It consists of two changes upon entering ibss mode: 1. Removing the redundant line which clears the driver's station table. This line creates a discrepancy between the driver and the FW's station table. This prevented the generation of beacons. 2. Assigning a default value to priv's assoc_id. Normally given by an AP in STA mode, this field is used as an indication for association. Being 0, it prevented normal TX flow. 3. Remove a redundant ADD_STA command that cause uCode error. 4. Delay the set_mode until after the uCode is ready. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: fix resart flow after fw errorEmmanuel Grumbach
Clear STATUS_FW_ERROR in the _up_ flow before reseting NIC. UP flow will otherwise call restart again causing endless restart loop. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: fix resume SW RF-killMohamed Abbas
This patch fixes SW RF-kill. If we resumed from S3 state with SW RF-kill set, the driver wouldn't be able to remove SW RF-kill. This patch fixes this. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 21:52:06 +0000