aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-07[SCSI] qla2xxx: Cleanup any outstanding SRB resources during shutdown.Andrew Vasquez
Refactor SRB-failure completion codes in the process. Also, signal the DPC routine to complete sooner as backend processing at shutdown-time is superflous. [jejb: resolve conflicts with pci_enable_device_bars removal] Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Add MODULE_FIRMWARE hint for ISP25XX firmware.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Correct resource_size_t usages.Andrew Vasquez
Hmm, it looks like the conversion to resource_size_t usage (3776541d8a46347a4924353a192c6ce4a3d04e2e) requires some additional fixups to cleanup the structure-pointer castings used during IO mapped accesses to the chip. There's only a small number of locations, where the driver uses IO mapped accesses to the hardware, the patch below should take care of it without introducing to many structural changes to code flow. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] iscsi: bump version to 2.0-868Mike Christie
Set iscsi version to 2.0-868 Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] libiscsi: fix session age rollover and remove cid encodingMike Christie
The session age mask is only 4 bits, but session->age is 32. When it gets larger then 15 and we try to or the bits some bits get dropped and the check for session age in iscsi_verify_itt is useless. The ISCSI_CID_MASK related bits are also useless since cid is always one. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] iscsi: fix up iscsi printk prefixMike Christie
Some iscsi class messages have the dev_printk prefix and some libiscsi and iscsi_tcp messages have "iscsi" or the module name as a prefix which is normally pretty useless when trying to figure out which session or connection the message is attached to. This patch adds iscsi lib and class dev_printks so all messages have a common prefix that can be used to figure out which object printed it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] iscsi class: fix iscsi conn attr counterMike Christie
There are 13 iscsi conn attrs, but since the IF/OF markers were not being used we did not notice that we forgot to increment the ISCSI_CONN_ATTRS counter. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] libiscsi: fix setting of nop timerMike Christie
If we rollover then we could get a next_timeout of zero, so we need to set the new timer to that value. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla4xxx: add async scan supportMike Christie
qla4xxx has the old school startup/probe where it finds presetup sessions in its flash and then attempts to log into them before returning from the probe. This however, makes it very simple to add a iscsi class scan finished helper which the driver can use. In future patches Dave or I will rip apart the driver to make it more like qla2xxx, but for now this is a very simple two line patch which fixes the problem of trying to figure out when the initial sessions are done being scanned. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] iscsi class: add async scan helperMike Christie
In qla4xxx's probe it will call the iscsi session setup functions for session that got setup on the initial start. This then makes it easy for the iscsi class to export a helper which indicates when those scans are done. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla4xxx: fix recovery timer and session unblock raceMike Christie
If qla4xxx is resetting up a session and the recovery timer fires we do not want to just set it to dead, because the dpc thread could have just set it to online and is in the middle of resetting it up. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] iscsi class: add session scanningMike Christie
This just adds iscsi session scanning which works like fc rport scanning. The future patches will hook the drivers into Mathew Wilcox's async scanning infrastructure, so userspace does not have to special case iscsi and so userspace does not have to make a extra special case for hardware iscsi root scanning. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla4xxx: use iscsi class session state check readyMike Christie
This has qla4xxx use the iscsi class's check ready function in the queue command function, so all iscsi drivers return the same error value for common problems. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla4xxx: directly call iscsi recovery functionsMike Christie
Qla4xxx can just call the iscsi recovery functions directly. There is no need for userspace to do this for qla4xxx, because we do not use the mutex to iterate over devices anymore and iscsi_block /unblock_session can be called from interrupt context or the dpc thread. And having userspace do this just creates uneeded headaches for qla4xxx root situations where the session may experience problems. For example during the kernel shutdown the scsi layer wants to send sync caches, but at this time userspace is not up (iscsid is not running), so we cannot recover from the problem. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] iscsi class, libiscsi: add iscsi sysfs session state fileMike Christie
This adds a iscsi session state file which exports the session state for both software and hardware iscsi. It also hooks libiscsi in. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] arm: convert to accessors and !use_sg cleanupBoaz Harrosh
- convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Tested-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] mca_53c9x: remove driverJames Bottomley
This driver depends on the deprecated NCR53C9X core and needs to be converted to the esp_scsi core. Acked-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] sym53c8xx: fix resid calculationTony Battersby
This patch fixes the calculation of the data transfer residual for the case of a command that is supposed to transfer an odd number of bytes on a wide bus but transfers nothing instead. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] ps3rom: sector size should be 512 bytesAegis Lin
It should be desired that 64 KiB is available for ATAPI transferrring. (Historically) in SCSI/block layer sector size is defined as 512 during sector-byte calculation. Originally in ps3rom.c CD_FRAMESIZE (2048) was used, which limited /sys/block/sr0/queue/max_sectors_kb to 16 KiB (32 sectors). Signed-off-by: Aegis Lin <aegislin@gmail.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] sun3x_esp: convert to esp_scsiThomas Bogendoerfer
Converted sun3x_esp driver to use esp_scsi.c Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] libiscsi: make __iscsi_complete_pdu() staticAdrian Bunk
__iscsi_complete_pdu() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] aacraid: fib context lock for management ioctls (take 2)Salyzyn, Mark
The first patch (a119ee8ee3045bf559d4cf02d72b112f3de2a15b) was a bit too aggressive and nested the locks (!) unit testing was in error. This patch was reverted by 203a512f0976e8ba85df36d76b40af6c80239121. This new patch should fix the locks correctly. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits) Input: i8042 - non-x86 build fix Input: pxa27x_keypad - also enable on PXA3xx Input: pxa27x_keypad - add debounce_interval to the keypad platform data Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ Input: pxa27x_keypad - enable rotary encoders and direct keys Input: pxa27x_keypad - introduce pxa27x_keypad_config() Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys Input: pxa27x_keypad - remove pin configuration from the driver Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard) Input: constify function pointer tables (seq_operations) Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list Input: i8042 - enable DMI quirks on x86-64 Input: i8042 - add Dritek quirk for Acer Aspire 9110 Input: add input event to APM event bridge Input: mousedev - use BIT_MASK instead of BIT Input: remove duplicate includes Input: remove cdev from input_dev structure Input: remove duplicated headers in drivers/char/keyboard.c Input: i8042 - add Dritek keyboard extension quirk Input: add Tosa keyboard driver ...
2008-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: sysfs: remove BUG_ON() from sysfs_remove_group() Driver core: Revert "Fix Firmware class name collision" Block: Fix whole_disk attribute bug
2008-02-07i915: Fix GR register array size off-by-one bugJesse Barnes
Make sure we have enough room for all the GR registers or we'll end up clobbering the AR index register (which should actually be harmless unless the BIOS is making an assumption about it). Noticed-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Driver core: Revert "Fix Firmware class name collision"Michael E Brown
This reverts commit 109f0e93b6b728f03c1eb4af02bc25d71b646c59. The original patch breaks BIOS updates on all Dell machines. The path to the firmware file for the dell_rbu driver changes, which breaks all of the userspace tools which rely on it. Note that this patch re-introduces a problem with i2c name collision that was previously fixed by this patch. Signed-off-by: Michael E Brown <michael_e_brown@dell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (120 commits) [MTD] Fix mtdoops.c compilation [MTD] [NOR] fix startup lock when using multiple nor flash chips [MTD] [DOC200x] eccbuf is statically defined and always evaluate to true [MTD] Fix maps/physmap.c compilation with CONFIG_PM [MTD] onenand: Add panic_write function to the onenand driver [MTD] mtdoops: Use the panic_write function when present [MTD] Add mtd panic_write function pointer [MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support. [MTD] physmap.c: Add support for multiple resources [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179... [MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes [MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver [MTD] [NAND] Remove unused variable in plat_nand_remove [MTD] Unlocking all Intel flash that is locked on power up. [MTD] [NAND] at91_nand: Make mtdparts option can override board info [MTD] mtdoops: Various minor cleanups [MTD] mtdoops: Ensure sequential write to the buffer [MTD] mtdoops: Perform write operations in a workqueue [MTD] mtdoops: Add further error return code checking [MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c ...
2008-02-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (112 commits) ACPI: fix build warning Revert "cpuidle: build fix for non-x86" ACPI: update intrd DSDT override console messages ACPI: update DSDT override documentation ACPI: Add "acpi_no_initrd_override" kernel parameter ACPI: its a directory not a folder.... ACPI: misc cleanups ACPI: add missing prink prefix strings ACPI: cleanup acpi.h ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build ACPI: video: Ignore ACPI video devices that aren't present in hardware ACPI: video: reset brightness on resume ACPI: video: call ACPI notifier chain for ACPI video notifications ACPI: create notifier chain to get hotkey events to graphics driver ACPI: video: delete unused display switch on hotkey event code ACPI: video: create "brightness_switch_enabled" modparam cpuidle: Add a poll_idle method ACPI: cpuidle: Support C1 idle time accounting ACPI: enable MWAIT for C1 idle ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling ...
2008-02-07Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Add OMAP1 PWL backlight driver backlight: Avoid unecessary driver callbacks
2008-02-07Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Add HP Jornada 6xx driver leds: Remove the now uneeded ixp4xx driver leds: Add power LED to the wrap driver leds: Fix led-gpio active_low default brightness leds: hw acceleration for Clevo mail LED driver leds: Add support for hardware accelerated LED flashing leds: Standardise LED naming scheme leds: Add clevo notebook LED driver
2008-02-07Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (22 commits) drm: add initial r500 drm support radeon: setup the ring buffer fetcher to be less agressive. drm: fixup some of the ioctl function exit paths drm: the drm really should call pci_set_master.. i915: Add chipset id for Intel Integrated Graphics Device drm: cleanup DRM_DEBUG() parameters drm/i915: add support for E7221 chipset drm: don't cast a pointer to pointer of list_head mga_dma: return 'err' not just zero from mga_do_cleanup_dma() drm: add _DRM_DRIVER flag, and re-order unload. drm: enable udev node creation drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx. drm: move drm_mem_init to proper place in startup sequence drm: call driver load function after initialising AGP drm: Fix ioc32 compat layer drm: fd.o bug #11895: Only add the AGP base to map offset if the caller didn't. i915: add suspend/resume support drm: update DRM sysfs support drm: Initialize the AGP structure's base address at init rather than enable. drm: move two function extern into the correct block ...
2008-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Add missing printk levels to e_powersaver [CPUFREQ] Fix sparse warning in powernow-k8 [CPUFREQ] Support Model D parts and newer in e_powersaver [CPUFREQ] Powernow-k8: Update to support the latest Turion processors [CPUFREQ] fix configuration help message [CPUFREQ] powernow-k8 print pstate instead of fid/did for family 10h [CPUFREQ] Eliminate cpufreq_userspace scaling_setspeed deadlock [CPUFREQ] gx-suspmod.c: use boot_cpu_data instead of current_cpu_data [CPUFREQ] fix incorrect comment on show_available_freqs() in freq_table.c [CPUFREQ] drivers/cpufreq: Add missing "space" [CPUFREQ] arch/x86: Add missing "space" [CPUFREQ] Remove pointless Kconfig dependancy
2008-02-07Merge branch 'for-2.6.25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits) [POWERPC] Add SPE registers to core dumps [POWERPC] Use regset code for compat PTRACE_*REGS* calls [POWERPC] Use generic compat_sys_ptrace [POWERPC] Use generic compat_ptrace_request [POWERPC] Use generic ptrace peekdata/pokedata [POWERPC] Use regset code for PTRACE_*REGS* requests [POWERPC] Switch to generic compat_binfmt_elf code [POWERPC] Switch to using user_regset-based core dumps [POWERPC] Add user_regset compat support [POWERPC] Add user_regset_view definitions [POWERPC] Use user_regset accessors for GPRs [POWERPC] ptrace accessors for special regs MSR and TRAP [POWERPC] Use user_regset accessors for SPE regs [POWERPC] Use user_regset accessors for altivec regs [POWERPC] Use user_regset accessors for FP regs [POWERPC] mpc52xx: fix compile error introduce when rebasing patch [POWERPC] 4xx: PCIe indirect DCR spinlock fix. [POWERPC] Add missing native dcr dcr_ind_lock spinlock [POWERPC] 4xx: Fix offset value on Warp board [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry ...
2008-02-07Char: mxser, add support for CP-114ULJiri Slaby
Add new card (0x1393:0x1143) support added in 1.11 original driver, also allow rate change in set_serial_info ioctl (as per 1.11 too). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, remove itJiri Slaby
(Old) mxser is obsoleted by mxser_new and scheduled for removal on Dec 2007. Remove it by renaming mxser_new to mxser. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, ioctl cleanupJiri Slaby
- remove dead MOXA_GET_CONF (always returned -ENXIO) - remove useless MOXA_GET_CUMAJOR (unused) - use get/put_user instead of copy_from/to_user for simple types - cleanup TIOCMIWAIT -- return -ERESTARTSYS on signal, move condition into separate function Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, simplify mxser_get_serial_infoJiri Slaby
Initialize temp structure directly with proper values without first zeroing it and setting later as suggested by Jan. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jan Engelhardt <jengelh@computergmbh.de> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, reorder mxser_cardinfo fieldsJiri Slaby
Reorder fields to save some memory and code on 64bit due to alignment as suggested by Jan. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jan Engelhardt <jengelh@computergmbh.de> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, 0 to NULL in pointerJiri Slaby
Don't test a pointer against 0. Use NULL instead. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, remove special baudrate processingJiri Slaby
Let the special baudrate processing on the tty layer. Also remove set/get_special_rate ioctls introduced in commit f64c84a1668930d1ca2b7dbaa92146c2139cb508, since it is no longer needed. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07mxser/mxser_new: first pass over termios reporting for the mxser cardsAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: riscom8, remove wakeup and hangup bottomhalvesJiri Slaby
Both of them may be called directly from the code, don't add special code and variables and schedule a work for them. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: serial167, remove bottomhalfJiri Slaby
- Cy_EVENT_OPEN_WAKEUP is simple wake_up - Cy_EVENT_HANGUP is wake_up + tty_hangup, which schedules its own work - Cy_EVENT_WRITE_WAKEUP is tty_wakeup which may be called directly too Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: stallion, remove bottomhalfJiri Slaby
- tty_hangup schedules a bottomhalf itself, tty_wakeup doesn't need it - call the CD code (part of work handler previously) directly from the code (it wakes somebody up or calls tty_hangup at worse) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: specialix, remove bottomhalvesJiri Slaby
- tqueue is used only for tty_wakeup, call it directly from the code - tqueue_hangup for tty_hangup, it schedules its own work, use it directly too Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: istallion, remove hangup bottomhalfJiri Slaby
tty_hangup schedules a work for hangup itself, no need to do it in the driver. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: esp, remove hangup and wakeup bottomhalvesJiri Slaby
There is no need to schedule a bottomhalf for either of them. One is fast and the another schedules a bottomhalf itself. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: riscom8, change rc_init_drivers prototypeJiri Slaby
Let compiler decide if the rc_init_drivers function will be inlined and mark it as __init, because it's called only from __init function. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: stallion, fix compiler warningsJiri Slaby
Don't emit warnings on 64 bit platforms from min(). sizeof() on those is not uint, neither 2 pointers difference, cast it to uint by min_t in both cases. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser_new, ioaddresses are ulongJiri Slaby
To not pass ulong address as int parameter, switch it to ulong. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 21:08:21 +0000