aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-01-05[PATCH] KVM: Fix GFP_KERNEL alloc in atomic section bugIngo Molnar
KVM does kmalloc() in an atomic section while having preemption disabled via vcpu_load(). Fix this by moving the ->*_msr setup from the vcpu_setup method to the vcpu_create method. (This is also a small speedup for setting up a vcpu, which can in theory be more frequent than the vcpu_create method). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05[PATCH] via82cxxx: fix cable detectionBartlomiej Zolnierkiewicz
This patch fixes 2.6.15 regression, is straightforward and tested. Cable detection got broken probably while converting the driver to support multiple controllers. Cable detection is done by examining how BIOS configured the attached devices. The current code is broken in that it examines the status *after* modifying Clk66 configuration ending up detecting 40c cables as 80c. This patch fixes it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05[PATCH] PCI: prevent down_read when pci_devices is emptyArd van Breemen
The pci_find_subsys gets called very early by obsolete ide setup parameters. This is a bogus call since pci is not initialized yet, so the list is empty. But in the mean time, interrupts get enabled by down_read. This can result in a kernel panic when the irq controller gets initialized. This patch checks if the device list is empty before taking the semaphore, and hence will not enable irq's. Furthermore it will inform that it is called while pci_devices is empty as a reminder that the ide code needs to be fixed. The pci_get_subsys can get called in the same manner, and as such is patched in the same manner. [akpm@osdl.org: cleanups] Signed-off-by: Ard van Breemen <ard@telegraafnet.nl> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05[PATCH] Fix leds-s3c24xx hardware.h referenceRichard Purdie
Russell King recently reminded us that one shouldn't use asm/arch/hardware.h but one should use asm/hardware.h (http://lkml.org/lkml/2006/12/23/26). Unfortunately, the leds-s3c24xx driver is using the wrong header. This patch is fixing that. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05[PATCH] Fix implicit declarations in via-pmuDave Jones
drivers/macintosh/via-pmu.c: In function 'pmac_suspend_devices': drivers/macintosh/via-pmu.c:2014: error: implicit declaration of function 'pm_prepare_console' drivers/macintosh/via-pmu.c: In function 'pmac_wakeup_devices': drivers/macintosh/via-pmu.c:2139: error: implicit declaration of function 'pm_restore_console' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05[PATCH] PCI: disable PCI_MULTITHREAD_PROBEAndrew Morton
Unfortunatly, no one reads Kconfig help entries :( Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB: asix: Fix AX88772 device PHY selectionDavid Hollis
A small typo in ax88772_bind() prevents the device from selecting the proper PHY, leaving the device useless. The attached patch fixes this. If this patch can be added to the 2.6.19.x series as well, that would be helpful for end-users. Signed-off-by: David Hollis <dhollis@davehollis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB: usblp.c - add Kyocera Mita FS 820 to list of "quirky" printersMartin Williges
This patch gets the Kyocera FS-820 working with cups 1.2 via usb again. It adds the printer to the list of "quirky" printers. The printer seems not answer to ID requests some seconds after plugging in. Patch is based on linux-2.6.19.1. Background: As far as I could see (strace, usbmon), the Kyocera FS-820 answers to ID requests only a few seconds after plugging it in. This applies to detecting it with cups and is also true for the printing itself, which is initiated with an ID request. Since I have little usb knowledge, maybe someone can interpret the data, especially the fist bulk transfer - why request 8192 bytes? This is the second version of the patch. usbmon output of printing an email without patch: tail -F /tmp/printlog.txt c636e140 3374734463 S Bi:002:02 -115 8192 < c9d43b40 3374734494 S Ci:002:00 s a1 00 0000 0000 03ff 1023 < c9d43b40 3379732301 C Ci:002:00 -104 0 c636e140 3379733294 C Bi:002:02 -2 0 [...repeating...] with patch: tail -F /tmp/printlog.txt d9cb82c0 3729790131 S Ci:002:00 s a1 00 0000 0000 03ff 1023 < d9cb82c0 3729791725 C Ci:002:00 0 91 = 005b4944 3a46532d 3832303b 4d46473a 4b796f63 6572613b 434d443a 50434c58 df956320 3732493190 S Bo:002:01 -115 1347 = 1b252d31 32333435 5840504a 4c0a4050 4a4c2053 4554204d 414e5541 4c464545 [...more data...] Signed-off-by: Martin Williges <kernel@zut.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05sisusb_con warning fixesAndrew Morton
x86_64: drivers/usb/misc/sisusbvga/sisusb_con.c: In function 'sisusbcon_putc': drivers/usb/misc/sisusbvga/sisusb_con.c:405: warning: cast from pointer to integer of different size drivers/usb/misc/sisusbvga/sisusb_con.c: In function 'sisusbcon_putcs': drivers/usb/misc/sisusbvga/sisusb_con.c:440: warning: cast from pointer to integer of different size drivers/usb/misc/sisusbvga/sisusb_con.c: In function 'sisusbcon_clear': drivers/usb/misc/sisusbvga/sisusb_con.c:494: warning: cast from pointer to integer of different size drivers/usb/misc/sisusbvga/sisusb_con.c: In function 'sisusbcon_bmove': drivers/usb/misc/sisusbvga/sisusb_con.c:566: warning: cast from pointer to integer of different size drivers/usb/misc/sisusbvga/sisusb_con.c: In function 'sisusbcon_switch': drivers/usb/misc/sisusbvga/sisusb_con.c:614: warning: cast from pointer to integer of different size drivers/usb/misc/sisusbvga/sisusb_con.c: In function 'sisusbcon_scroll_area': drivers/usb/misc/sisusbvga/sisusb_con.c:941: warning: cast from pointer to integer of different size Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB: Fixed bug in endpoint release function.Sarah Bailey
Error handling in usb_create_ep_files() is not correct unless the minor number is freed in ep_device_release(). Signed-off-by: Sarah Bailey <saharabeara@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB storage: fix ipod ejecting issuePete Zaitcev
This patch from Pete fixes the 'ejecting problem' on yet another ipod. Please applyt. Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB Storage: unusual_devs: add supertop drivesPhil Dibowitz
This combines patches from Alan Stern and Robert Schedel for two "Super Top" drives that need the IGNORE_RESIDUE flag but have different vendor IDs. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB: omap_udc build fixes (sync with linux-omap)David Brownell
Resync the omap_udc driver with the latest from the Linux-OMAP tree. Changes include DMA API updates (it builds again!), clock/pm updates, minor bugfixes, whitespace. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB: funsoft is borken on sparcAndrew Morton
drivers/usb/serial/funsoft.c: In function `funsoft_ioctl': drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_iflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_iflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_iflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_oflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_oflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_oflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_lflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_lflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_lflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_line' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_line' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_line' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' Cc: David Clare <david@funsoft.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB: fix interaction between different interfaces in an "Option" usb deviceMiguel Angel Alvarez
Just the serial port in the first interface should control DTR and RTS lines. This way, the closing of the rest of the ports does not produce a= hangup in the communication. Signed-off-by: Miguel Angel Alvarez <ma.alvarez@ziv.es> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05UHCI: support device_may_wakeupAlan Stern
This patch (as831) adds device_may_wakeup() support to uhci-hcd; it has been lacking for a long time. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05UHCI: make test for ASUS motherboard more specificAlan Stern
Instead of matching all motherboards whose name contains "A7V8X" for a remote-wakeup hardware bug, this patch (as829) matches only those boards whose name is exactly equal to "A7V8X". Later motherboards don't seem to have the bug. (In fact, it's possible that only one motherboard in the world has the bug. With only one user reporting problems, it's hard to tell.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05i2c/m41t00: Do not forget to write yearPhilippe De Muyter
m41t00.c forgets to set the year field in set_rtc_time; fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-01-05i2c-mv64xxx: Fix random oops at bootMaxime Bizon
I have a Marvell board which has the same i2c hw block than mv64xxx, so I'm trying to use i2c-mv64xxx driver. But I get the following random oops at boot: Unable to handle kernel NULL pointer dereference at virtual address 00000002 Backtrace: [<c0397e4c>] (mv64xxx_i2c_intr+0x0/0x2b8) from [<c02879c4>] (__do_irq+0x4c/0x8c) [<c0287978>] (__do_irq+0x0/0x8c) from [<c0287c0c>] (do_level_IRQ+0x68/0xc0) r8 = C0501E08 r7 = 00000005 r6 = C0501E08 r5 = 00000005 r4 = C048BB78 [<c0287ba4>] (do_level_IRQ+0x0/0xc0) from [<c02885f8>] (asm_do_IRQ+0x50/0x134) r6 = C0449C78 r5 = F1020000 r4 = FFFFFFFF [<c02885a8>] (asm_do_IRQ+0x0/0x134) from [<c02869c4>] (__irq_svc+0x24/0x100) r8 = C1CAC400 r7 = 00000005 r6 = 00000002 r5 = F1020000 r4 = FFFFFFFF [<c0287efc>] (setup_irq+0x0/0x124) from [<c02880d0>] (request_irq+0xb0/0xd0) r7 = C041B2AC r6 = C0397E4C r5 = 00000000 r4 = 00000005 [<c0288020>] (request_irq+0x0/0xd0) from [<c03985f4>] (mv64xxx_i2c_probe+0x148/0x244) [<c03984ac>] (mv64xxx_i2c_probe+0x0/0x244) from [<c038bedc>] (platform_drv_probe+0x20/0x24) The oops is caused by a spurious interrupt that occurs when request_irq is called. mv64xxx_i2c_fsm() tries to read drv_data->msg, which is NULL. I noticed that hardware init is done after requesting irq. Thus any pending irq from previous hardware usage may cause this. The following patch fixes it: Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-01-04IB/mthca: Fix off-by-one in FMR handling on memfreeMichael S. Tsirkin
mthca_table_find() will return the wrong address when the table entry being searched for is exactly at the beginning of a sglist entry (other than the first), because it uses >= when it should use >. Example: assume we have 2 entries in scatterlist, 4K each, offset is 4K. The current code will return first entry + 4K when we really want the second entry. In particular this means mapping an FMR on a memfree HCA may end up writing the page table into the wrong place, leading to memory corruption and also causing the HCA to use an incorrect address translation table. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-01-04Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4/IPV6]: Fix inet{,6} device initialization order. [TCP]: Use old definition of before [NETFILTER]: ebtables: don't compute gap before checking struct type [NETFILTER]: nf_nat: fix MASQUERADE crash on device down [NETFILTER]: New connection tracking is not EXPERIMENTAL anymore [NETFILTER]: Fix routing of REJECT target generated packets in output chain [NETFILTER]: compat offsets size change [SUNGEM]: PHY updates & pause fixes (#2) [X25]: proper prototype for x25_init_timers() [AF_NETLINK]: module_put cleanup [XFRM_USER]: avoid pointless void ** casts [NETFILTER] xt_hashlimit.c: fix typo [NET] drivers/net/loopback.c: convert to module_init() [PKTGEN]: Convert to kthread API. [NET]: ifb double-counts packets
2007-01-04Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: asus_acpi: new MAINTAINER ACPI: fix section mis-match build warning ACPI: increase ACPI_MAX_REFERENCE_COUNT for larger systems ACPI: EC: move verbose printk to debug build only backlight: fix backlight_device_register compile failures
2007-01-04i2c: Migration aids for i2c_adapter.dev removalDavid Brownell
Flag i2c_adapter.dev for removal after userspace tools get upgraded, and include a near-term code migration aid to facilitate this: - The class device gets the name attribute it should have had. This was previously (wrongly) associated with the i2c_adapter.dev node. Sysfs based tools and libraries can start converting right away. - Issue a warning for legacy adapter drivers that don't provide any physical device node; so systems with those drivers will know to fix this problem earlier. This is one of a series of patches to help the I2C stack become a better citizen of the Linux Driver Model world. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-01-04i2c-pnx: Fix interrupt handler, get rid of EARLY config optionVitaly Wool
This fixes two issues raised by David Brownell on the i2c list: << Someone needs to update i2c-pnx.c to handle the IRQ handler doesn't expect pt_regs (gone now for a while), and so it doesn't try to reference "mudule_init()" if I2C isn't initialized "early". For that matter, to get rid of that _option_ to initialize then, and always init that driver with subsystem_init() ... it's common with embedded systems to need I2C access to tweak a GPIO expander or do some other work when bringing up drivers, that's not specific to USB stacks. >> Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-01-04HID: fix help texts in KconfigJiri Kosina
The help text for CONFIG_HID might imply for someone that it's necessary to enable it for any keyboard or mouse attached to the system. This is obviously not correct, so fix it to avoid confusing the users. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-04Fix some ARM builds due to HID brokennessRussell King
HID it defaults to 'y'. When you have input deselected, this causes the kernel to fail to link. Fix it by making it depend on INPUT. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-03[SUNGEM]: PHY updates & pause fixes (#2)Benjamin Herrenschmidt
This patch adds support for a few more PHYs used by Apple and fixes advertising and detecting of Pause (we were missing setting the bit in MII_ADVERTISE and weren't testing in LPA for all PHYs). Note that I currently only advertise pause, not asymetric pause. I don't know for sure the details there, I suppose I should read a bit more 802.3 references, and I don't now what sungem is capable of, but I noticed the PCS code (originated from you) does the same. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-03[NET] drivers/net/loopback.c: convert to module_init()Adrian Bunk
This patch converts drivers/net/loopback.c to using module_init(). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-03[NET]: ifb double-counts packetsdean gaudet
Signed-off-by: dean gaudet <dean@arctic.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-03Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] drivers/char/agp/sgi-agp.c: check kmalloc() return value [AGPGART] Fix PCI-posting flush typo. [AGPGART] fix detection of aperture size versus GTT size on G965 [AGPGART] Remove unnecessary flushes when inserting and removing pages. [AGPGART] K8M890 support for amd-k8.
2007-01-03Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] longhaul: Kill off warnings introduced by recent changes. [CPUFREQ] Uninitialized use of cmd.val in arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c:acpi_cpufreq_target() [CPUFREQ] Longhaul - Always guess FSB [CPUFREQ] Longhaul - Fix up powersaver assumptions. [CPUFREQ] longhaul: Fix up unreachable code. [CPUFREQ] speedstep-centrino: missing space and bracket [CPUFREQ] Bug fix for acpi-cpufreq and cpufreq_stats oops on frequency change notification [CPUFREQ] select consistently
2007-01-03[PATCH] cdrom: set default timeout to 7 secondsJens Axboe
It's a known fact that Windows times out commands after 7 seconds, so drives generally try and respond if they can before that happens. We default to 5 seconds, which sometimes is a bit too short. Jeremy Higdon reported here: http://lkml.org/lkml/2007/1/1/145 that his drive takes longer than 5 seconds for a "read track information" command, later confirming that it is about 6.7 seconds. So just do the sane thing and change the default command timeout to 7 seconds to avoid other surprises. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-02[AGPGART] drivers/char/agp/sgi-agp.c: check kmalloc() return valueakpm@osdl.org
drivers/char/agp/sgi-agp.c: check kmalloc() return value Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-01-02[PATCH] ipw2100: Fix dropping fragmented small packet problemZhu Yi
The rx_data.header struct is ieee80211_hdr_4addr. If a wireless frame uses ieee80211_hdr_3addr header and is less than 6 bytes, it will be discarded. This is not likely going to happen for normal packets (since there is TCP, IP headers). But if fragmentation is used, there will be such small trailing packets. And they will be lost for ever. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-01-02[PATCH] libata: fix combined modeAlan
This is a slight variant on the patch I posted December 16th to fix libata combined mode handling. The only real change is that we now correctly also reserve BAR1,2,4. That is basically a neatness issue. Jeff was unhappy about two things 1. That it didn't work in the case of one channel native one channel legacy. This is a silly complaint because the SFF layer in libata doesn't handle this case yet anyway. 2. The case where combined mode is in use and IDE=n. In this case the libata quirk code reserves the resources in question correctly already. Once the combined mode stuff is redone properly (2.6.21) then the entire mess turns into a single pci_request_regions() for all cases and all the ugly resource hackery goes away. I'm sending this now rather than after running full test suites so that it can get the maximal testing in a short time. I'll be running tests on this after lunch. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Alessandro Suardi <alessandro.suardi@gmail.com> Acked-by: Theodore Tso <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-02ACPI: EC: move verbose printk to debug build onlyGuillaume Chazarain
The recent EC cleanup left a printk enabled on handler evaluation resulting in a bunch of messages on normal operation, like so: ACPI: EC: evaluating _Q60 Signed-off-by: Len Brown <len.brown@intel.com>
2007-01-02backlight: fix backlight_device_register compile failuresRichard Purdie
Fix breakage from commit 519ab5f2be65b72cf12ae99c89752bbe79b44df6 which didn't update all references to backlight_device_register causing compile failures. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-31[SPARC64]: Fix of_iounmap() region release.David S. Miller
We need to pass in the resource otherwise we cannot release the region properly. We must know whether it is an I/O or MEM resource. Spotted by Eric Brower. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: fix bogus dma mapping ieee1394: sbp2: pass REQUEST_SENSE through to the target
2006-12-30[PATCH] kvm: fix GFP_KERNEL allocation in atomic section in ↵Ingo Molnar
kvm_dev_ioctl_create_vcpu() fix an GFP_KERNEL allocation in atomic section: kvm_dev_ioctl_create_vcpu() called kvm_mmu_init(), which calls alloc_pages(), while holding the vcpu. The fix is to set up the MMU state in two phases: kvm_mmu_create() and kvm_mmu_setup(). (NOTE: free_vcpus does an kvm_mmu_destroy() call so there's no need for any extra teardown branch on allocation/init failure here.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] KVM: Fix oops on oomAvi Kivity
__free_page() doesn't like a NULL argument, so check before calling it. A NULL can only happen if memory is exhausted during allocation of a memory slot. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] KVM: Rename some msrsNguyen Anh Quynh
No need to append _MSR to msr names, a prefix should suffice. Signed-off-by: Nguyen Anh Quynh <aquynh@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] KVM: More msr miseryAvi Kivity
These msrs are referenced by benchmarking software when pretending to be an Intel cpu. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] KVM: Move common msr handling to arch independent codeAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] KVM: Implement a few system configuration msrsAvi Kivity
Resolves sourceforge bug 1622229 (guest crashes running benchmark software). Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] KVM: Initialize kvm_arch_ops on unloadYoshimi Ichiyanagi
The latest version of kvm doesn't initialize kvm_arch_ops in kvm_init(), which causes an error with the following sequence. 1. Load the supported arch's module. 2. Load the unsupported arch's module.$B!!(B(loading error) 3. Unload the unsupported arch's module. You'll get the following error message after step 3. "BUG: unable to handle to handle kernel paging request at virtual address xxxxxxxx" The problem here is that the unsupported arch's module overwrites kvm_arch_ops of the supported arch's module at step 2. This patch initializes kvm_arch_ops upon loading architecture specific kvm module, and prevents overwriting kvm_arch_ops when kvm_arch_ops is already set correctly. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] KVM: Simplify is_long_mode()Avi Kivity
Instead of doing tricky stuff with the arch dependent virtualization registers, take a peek at the guest's efer. This simlifies some code, and fixes some confusion in the mmu branch. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] KVM: Use boot_cpu_data instead of current_cpu_dataAvi Kivity
current_cpu_data invokes smp_processor_id(), which is inadvisable when preemption is enabled. Switch to boot_cpu_data instead. Resolves sourceforge bug 1621401. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] PIIX/SLC90E66: PIO mode fallback fixSergei Shtylyov
The fallback to PIO mode in the hwif->dma_check() handler doesn't work in the Intel PIIX and SMsC SLC90E66 IDE drivers because: - config_drive_for_dma() calls the hwif->speedproc() handler with a wrong mode number (unbiased by XFER_PIO_0) in case of the PIO fallback; - hwif->tuneproc() handler doesn't really set the drive's own speed (this is not fixed as yet). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30[PATCH] PIIX: remove check for broken MW DMA mode 0Sergei Shtylyov
There's no need to check in piix_config_drive_for_dma() for broken MW DMA mode 0 as this mode is not supported by the driver (it sets hwif->mwdma_mask to 0x6), and hence can't be selected by ide_dma_speed(). (Alan sayeth "Probably right but if not you've got a subtle corruptor. Should at least stick a BUG_ON mode 0 setting right close when the mode is set.") Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-11 07:05:24 +0000