aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-05-23[MTD] Fixup probing logic for single 16bit devicesBen Dooks
The change to the generic probe to look for the smallest width of chip first is causing some problems on boards with a single 16bit device. The problem seems to be the jedec_match() is truncating the device-id read from the table to match against the one read from the hardware, causing a match against the partial id of some chips with 16bit IDs (such as the SST39LF160) This fixes things for my own board, but something may need to be done if the same problem is exhibited for chips with an 8bit ID Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Read only OOB bytes during bad block scanArtem B. Bityuckiy
When scanning NAND for bad blocks, don't read the whole page, read only needed OOB bytes instead. Also check the return code of the nand_read_raw() function. Correctly free the this->bbt array in case of failure. Tested with Large page NAND. Fix debugging message. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Allow operation without bad block tableArtem B. Bityuckiy
Small bugfix. Sometimes it may be handy not to have bbt. So, this->bbt might be NULL. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Skip bad block table scan on requestThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Unabuse file-f_mode for OTP purposeNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] User interface to Protection RegistersNicolas Pitre
This is implemented using a ioctl to switch the MTD char device into one of the different OTP "modes", at which point read/write/seek can operate on the selected OTP area. Also some extra ioctls to query for size and lock protection segments or groups. Some example user space utilities are provided. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Support for protection register support on Intel FLASH chipsNicolas Pitre
This enables support for reading, writing and locking so called "Protection Registers" present on some flash chips. A subset of them are pre-programmed at the factory with a unique set of values. The rest is user-programmable. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Add OTP basiscNicolas Pitre
add structure definition for OTP region info Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] amd_flash: Fix chip ID clashJonas Holmberg
* Removed table entry for AM29BDS643D, since device ID clashes with AM29DL640G and both chips support CFI. Signed-off-by: Jonas Holmberg <jonas.holmberg@axis.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip: big endian fix for NFTL devicesThomas Gleixner
Make NFTL devices work on big endian machines. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip code cleanupThomas Gleixner
Remove commented ugliness Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip use CONFIG_ options instead of random symbolsThomas Gleixner
Using the CONFIG_ options from KConfig seems to work better :8 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Fix MTD device probingRussell King
Try larger numbers of chips before smaller numbers of chips across the bus width. This means we'll avoid misdetecting a 2 x16 array as 1 x32 if the high 16-bits happen to read as zeros in the QRY area. Signed-off-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] rtc_from4 error status check, disable virtual erase blocksDavid A. Marlin
Added routine to perform extra error status checks on erase and write failures to determine if errors are correctable. Added option to prevent JFFS2 from using virtual erase blocks. Performed minor cleanup on whitespace and comments. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND Add optional ECC status check callbackDavid A. Marlin
Add optional hardware specific callback routine to perform extra error status checks on erase and write failures for devices with hardware ECC. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Platform RAM DriverBen Dooks
Driver for generic RAM blocks which are exported by an platform_device from the device driver system. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND use symbols instead of literalsDavid A. Marlin
Replace some literals with defined symbols. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND SharpSL fix default partition sizeRichard Purdie
Correct Poodle default partition size Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND replace yieldThomas Gleixner
Replace yield by msleep. M.Wilcox stared at it and frowned Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] bast-flash partitions fixupBen Dooks
Ensure the whole device is added if there are no partitions found on the device, so that at least the flash can be read/written. Replace some of the constants with their SZ_xxx counterparts Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Renesas AG-AND device recoveryDavid A. Marlin
Add routine to perform device recovery (deplete) procedure. Clean up some compiler warnings. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND workaround for AG-AND disturb issue. AG-AND recoveryDavid A. Marlin
Added workaround for Renesas AG-AND chips "disturb" issue for Bad Block Table. Added support for the device recovery command sequence for Renesas AG-AND chips. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND extended commands, badb block table autorefresh David A. Marlin
Added extended commands for AG-AND device and added option for BBT_AUTO_REFRESH. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] FTL Fix missing pointer assignmentHerbert Valerio Riedel
For the case that mtd partitions are enabled it would cause a 0-pointer dereferencing in mtdpart.c:mtd_erase_callback() Signed-off-by: Herbert Valerio Riedel <hvr@inso.tuwien.ac.at> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] slram driver cleanupJosh Boyer
Add error checks to read/write functions and add an eraseblock size. Makes slram a suitable device for JFFS2. Signed-off-by: Josh Boyer <jdub@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-18Automatic merge of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6.git/
2005-05-18[PATCH] Fix filp being passed through raw ioctl handlerStephen Tweedie
Don't pass meaningless file handles to block device ioctls. The recent raw IO ioctl-passthrough fix started passing the raw file handle into the block device ioctl handler. That's unlikely to be useful, as the file handle is actually open on a character-mode raw device, not a block device, so dereferencing it is not going to yield useful results to a block device ioctl handler. Previously we just passed NULL; also not a value that can usefully be dereferenced, but at least if it does happen, we'll oops instead of silently pretending that the file is a block device, so NULL is the more defensive option here. This patch reverts to that behaviour. Noticed by Al Viro. Signed-off-by: Stephen Tweedie <sct@redhat.com> Acked-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] Driver Core: remove driver model detach_stateDavid Brownell
The driver model has a "detach_state" mechanism that: - Has never been used by any in-kernel drive; - Is superfluous, since driver remove() methods can do the same thing; - Became buggy when the suspend() parameter changed semantics and type; - Could self-deadlock when called from certain suspend contexts; - Is effectively wasted documentation, object code, and headspace. This removes that "detach_state" mechanism; net code shrink, as well as a per-device saving in the driver model and sysfs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] Driver Core: pm diagnostics update, check for errorsDavid Brownell
This patch includes various tweaks in the messaging that appears during system pm state transitions: * Warn about certain illegal calls in the device tree, like resuming child before parent or suspending parent before child. This could happen easily enough through sysfs, or in some cases when drivers use device_pm_set_parent(). * Be more consistent about dev_dbg() tracing ... do it for resume() and shutdown() too, and never if the driver doesn't have that method. * Say which type of system sleep state is being entered. Except for the warnings, these only affect debug messaging. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI: add MODALIAS to hotplug event for pci devicesGreg KH
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI: add modalias sysfs file for pci devicesGreg KH
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI Hotplug: remove pci_visit_devScott Murray
If my CPCI hotplug update patch is applied, then there are no longer any in tree users of the pci_visit_dev API, and it and its related code can be removed. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI Hotplug: CPCI updateScott Murray
[PATCH] CPCI: update I have finally done some work to update the CompactPCI hotplug driver to fix some of the outstanding issues in 2.6: - Added adapter and latch status ops so that those files will get created by the current PCI hotplug core. This used to not be required, but seems to be now after some of the sysfs rework in the core. - Replaced slot list spinlock with a r/w semaphore to avoid any potential issues with sleeping. This quiets all of the runtime warnings. - Reworked interrupt driven hot extraction handling to remove need for a polling operator for ENUM# status. There are a lot of boards that only have an interrupt driven by ENUM#, so this lowers the bar to entry. - Replaced pci_visit_dev usage with better use of the PCI core functions. The new code is functionally equivalent to the previous code, but the use of pci_enable_device on insert needs to be investigated further, as I need to do some more testing to see if it is still necessary. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI Hotplug: get pciehp to work on the downstream port of a switchDely Sy
Here is the updated patch to get pciehp driver to work for downstream port of a switch and handle the difference in the offset value of PCI Express capability list item of different ports. Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI Hotplug: Fix echoing 1 to power file of enabled slot problem ↵Dely Sy
with SHPC driver Here is a patch to fix the problem of echoing 1 to "power" file to enabled slot causing the slot to power down, and echoing 0 to disabled slot causing shpchp_disabled_slot() to be called twice. This problem was reported by kenji Kaneshige. Thanks, Dely Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17Automatic merge of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-2.6.git
2005-05-17Merge of ↵
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
2005-05-17Automatic merge of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git/
2005-05-17[PATCH] dvb: budget-av: CI fixesJohannes Stezenbach
- remove enable_ci, ci interface is assumed to be present if the saa7113 is not found. - reduce the delay when checking for saa7113 - clean up the cam reset according to specifications - turn off Vcc to the cam slot if cam is removed or fails reset - remove cam reset in ciintf_init - clean up printks (KERN_) - move gpio setting into saa7113_init - clean up unreadable frontend_init (Kenneth Aafloy) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: bt8xx: whitespace cleanupJohannes Stezenbach
whitespace cleanup Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: DST: fixed CI debug outputJohannes Stezenbach
fixed CI debug output (Dominique Dumont) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: DST: fix a bug in the module parameterJohannes Stezenbach
fix a bug in the module parameter (Dominique Dumont) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: DST: misc. fixesJohannes Stezenbach
removed unused module parameter session removed unnecesary delay for FTA cards (Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: DST: fix for descrambling failureJohannes Stezenbach
fix for descrambling failure (Dominique Dumont, Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: DST: fixed tuning problemJohannes Stezenbach
fixed a tuning problem for cards based on the old firmware (Steffen Motzer, Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: DST: add support for Twinhan 200103AJohannes Stezenbach
add support for the old Twinhan 200103A card (Steffen Motzer) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: DST: reorganize Twinhan DST driver to support CIJohannes Stezenbach
- reorganize Twinhan DST driver to support CI - add support for more cards (Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: modified dvb_register_adapter() to avoid kmalloc/kfreeJohannes Stezenbach
Modified dvb_register_adapter() to avoid kmalloc/kfree. Drivers have to embed struct dvb_adapter into their private data struct from now on. (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: frontends: misc. minor cleanupsJohannes Stezenbach
misc. minor cleanups, select FW_LOADER and add a help text to DVB_OR51132 Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: make needlessly global code static or drop itJohannes Stezenbach
- make needlessly global code static - #if 0 the following unused global functions: - ttpci/av7110_hw.c: av7110_reset_arm - ttpci/av7110_hw.c: av7110_send_ci_cmd - frontends/mt352.[ch]: drop mt352_read Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-21 07:44:18 +0000