| Age | Commit message (Collapse) | Author |
|---|
|
|
|
On GTA02 we use FIQ to manage the vibrator IO now. That
is necessary because we stole timer3 from doing hw pwm
for vibrator. This keeps the same UI in /sys but does
"bitbang pwm" on the same vibrator GPIO
From: Andy Green <andy@openmoko.com>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
|
|
Disable the hardware ECC checking on S3C2440 based platforms (HXD8, SMDK2440,
GTA02) for the time being, since our u-boot doesn't yet support it for 2k page
size NAND
|
|
This patch disables the reporting of touchscreen-like devices via
/dev/input/mice. In the Neo1973 (much like other handheld devices),
we need this to distinguish between the touchscreen (which uses tslib)
and optional additional usb/bluetooth mice that might be attached.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
|
|
|
|
Moved shared PMU code from pcf50606.h and pcf50633.h (which prevented inclusion
of both at the same time) to pcf506xx.h
- include/linux/pcf50606.h (struct pmu_voltage_rail, enum pmu_event, pmu_cb):
moved to pcf506xx.h
- include/linux/pcf50633.h (struct pmu_voltage_rail, enum pmu_event, pmu_cb):
moved to pcf506xx.h
Signed off-by: Werner Almesberger <werner@openmoko.org>
|
|
|
|
|
|
This is a Linux driver for the STmicro LIS302DL 3-axis accelerometer.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
|
|
[ FIXME:
include/asm-arm/arch-s3c2410/irqs.h shouldn't contain device-specific
changes. ]
This is a Linux kernel driver for the Smedia Glamo336x / Glamo337x
multi-function peripheral device.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
|
|
This is a patch that seems to make the USB hangs on the S3C2440 go away. At
least a good amount of ping torture didn't make them come back so far.
The issue is that, if there are several back-to-back packets,
sometimes no interrupt is generated for one of them. This
seems to be caused by the mysterious dual packet mode, which
the USB hardware enters automatically if the endpoint size is
half that of the FIFO. (On the 2440, this is the normal
situation for bulk data endpoints.)
There is also a timing factor in this. I think what happens is
that the USB hardware automatically sends an acknowledgement
if there is only one packet in the FIFO (the FIFO has space
for two). If another packet arrives before the host has
retrieved and acknowledged the previous one, no interrupt is
generated for that second one.
However, there may be an indication. There is one undocumented
bit (none of the 244x manuals document it), OUT_CRS1_REG[1],
that seems to be set suspiciously often when this condition
occurs. There is also CLR_DATA_TOGGLE, OUT_CRS1_REG[7], which
may have a function related to this. (The Samsung manual is
rather terse on that, as usual.)
This needs to be examined further. For now, the patch seems to do the
trick.
Note that this is not a clean solution by any means, because we
might potentially get stuck in that interrupt for quite a while.
|
|
MTD: S3C24XX large page NAND support
This adds support for using large page NAND devices
with the S3C24XX NAND controller. This also adds the
file Documentation/arm/Samsung-S3C24XX/NAND.txt to
describe the differences.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
This is a MMC/SD driver for the Samsung S3C24xx SD/MMC controller, originally
developed years ago by Thomas Kleffel <tk@maintech.de>.
Due to time restraints, he had no time to further maintain the driver and
follow the mainline Linux changes in the SD/MMC stack.
With his authorization, I have taken over the task of making it compliant to
the current mainline SD/MMC API and take care of the mainline kernel merge.
After a potential kernel inclusion, we would co-maintain the driver.
Acked-by: Thomas Kleffel <tk@maintech.de>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
|
|
Use FIC's own USB Vendor ID rather than NetChip's
Yes, we could solve this by some modprobe.conf parameters, but I'd like to
rather not rely on this.
|
|
|
|
We need this stupid workaround since our amplifier chip uses a 'reserved' I2C
address
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
This is a backlight driver for the FIC/OpenMoko Neo1973 GTA01 GSM Phone
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This patch adds driver support for the vibator device of the FIC/OpenMoko
Neo1973 GSM phone. The driver uses the existing LED class driver framework,
since there's a lot of similarity between the LED and the vibrator function.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This provides support for the GTA01 keyboard
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This driver adds support for the SPI-based control interface of the LCM (LCD
Panel) found on the FIC GTA01 hardware.
The specific panel in this hardware is a TPO TD028TTEC1, but the driver should
be able to drive any other diplay based on the JBT6K74-AS controller ASIC.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This is a NXP PCF50606 power management unit driver.
The PCF50606 is used in the FIC/OpenMoko Neo1973 GTA01 GSM phone.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
[PATCH] Add Kconfig option to enable NAND bad-block-table support for s3c2410
This patch adds a new CONFIG_MTD_NAND_S3C2410_BBT which, if enabled,
asks the mtd NAND core to use a bad-block table.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
fix-i2c-s3c2410-resume-race.patch
There is a nasty race between i2c-s3c2410 resume and resume of I2C
driver and the client drivers -- the watchdog device actually gets to
use the dead I2C bus before it is reinitialized by the I2C driver
resume! This patch makes sure any customers get turned away until
the shopkeeper has woken up.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
[PATCH] support mtd NAND commandline partitions for S3C2410
This patch adds support for the mtd NAND core standard method of passing
partition table information from the bootloader into the kernel by using
the kernel commandline.
The board specific code can still manually override and provide a fixed
partition table, so this patch will behave backwards compatible.
Signed-off-by: Harald Welte <laforge@openmoko.org>
Acked-byt: Ben Dooks <ben-linux@fluff.org>
|
|
|
|
|
|
Support for the newer framebuffer hardware in the
Samsung SoC line of systems, such as the S3C2443,
S3C2450, S3C2416 and the S3C64XX series.
This driver does not have any support yet for the
alpha-blending or chroma-key for mixing the window
output together.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
The LCD driver core calls LCD drivers when either the blanking state
or the display mode has changed, but does not make any check to see
if the called driver has a .set_mode method.
This means if a driver only has a .set_power method then the system
will OOPS on changing mode (and with the console semaphore held so
you cannot easily see the problem).
Fix the problem by ensuring that either callback is valid before use.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmk-next
|
|
It's showing up as regressions; disabling it very likely just papers
over an underlying issue, but time is running out for 2.6.28, lets get
back to this for 2.6.29
Fixes: #11826 and #11893
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The "Exclude staging drivers" question is there so that we don't build
staging drivers for allyesconfig or allnoconfig settings, but it's very
irritating when you've already said "no" to staging drivers earlier.
There is absolutely no point in declining twice - once you've declined
the staging drivers, you're done.
So make the second question depend on the first question having been
answered in the affirmative.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: struct device - replace bus_id with dev_name(), dev_set_name()
mmc: increase SD write timeout for crappy cards
|
|
Use menuconfig instead of flat configs so that you can disable/enable
regulator items with one selection. Also, use depends instead of
reverse selections to make life easier, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
|
|
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
It seems that some cards are slightly out of spec and occasionally
will not be able to complete a write in the alloted 250 ms [1].
Incease the timeout slightly to allow even these cards to function
properly.
[1] http://lkml.org/lkml/2008/9/23/390
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'oprofile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
oprofile: Fix p6 counter overflow check
Cell OProfile: Incorrect local array size in activate spu profiling function
Revert "Cell OProfile: Incorrect local array size in activate spu profiling function"
oprofile: fix memory ordering
Cell OProfile: Incorrect local array size in activate spu profiling function
Change UTF8 chars in Kconfig help text about Oprofile AMD barcelona
|
|
Thanks to Randy Dunlap for finding this problem.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This Kconfig change allows the common 'make allmodconfig' and
'make allyesconfig' build options to skip the staging tree, which is
probably what you want to have happen anyway.
This makes the linux-next developer's life a lot easier so he doesn't
have to worry about changes that break the staging tree, that's for me
to worry about...
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into x86/urgent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: fix range check on mmapped sysfs resource files
PCI: remove excess kernel-doc notation
PCI: annotate return value of pci_ioremap_bar with __iomem
PCI: fix VPD limit quirk for Broadcom 5708S
|
|
This triggers false bug reports as it does a bogus kmalloc with locks held
but is never really compiled into the kernel.
Closes #8329
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As we've lost our trivial maintainer for the moment I'll send this
directly. Only touches a comment
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
