aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (7052): tda18271: when tuning digital, the analog demod must be ↵Michael Krufky
tri-stated Call analog_ops.standby during tda18271_set_params, to put the tda8295 in tri-state when tuning digital channels. Otherwise the tda8295 will interfere with the signal coming from the tda18271 into the digital demodulator. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7051): Cleans up error handling on or51xxx_attachMauro Carvalho Chehab
state is already NULL. Reviewed-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7047): fix broken build when CONFIG_USB_SI470X is setMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7046): Finalise support for the Pinnacle HD 8000iSteven Toth
Correctly set the atatch structures, enable IR, configure the xc5000 tuner includes. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7045): xc5000: Small amount of cleanup and commentingSteven Toth
xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7044): XC5000: Fix support for HVR1500Q broken by patch 1Steven Toth
From Zhang: This patch fixes support for the HVR1500Q which was broken when the xc5000 analog patch was added. Patch committed as-is, cleanups to follows .... Steve Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7043): New card supported(partially): Pinnacle 800iSteven Toth
From Zhang: This patch continues the support for the Pinnacle HD 800i. Patch committed as-is, cleanups to follow ... Steve Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7042): xc5000: Tuner analog supportSteven Toth
From Zhang: This an updated patch that adds analog support for the xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i card (patches to follow). Patch commited as-is, cleanup to follow ... Steve. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7041): s5h1409: Bug fix for parallel supportSteven Toth
Parallel support was not working with the s5h1409 and the Pinnacle HD800i. This patch fixes the demodulator driver and ensures that all existing s5h1409 based products configure the demodulator correctly. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7039): Reorder headersMauro Carvalho Chehab
The backports weren't tested, but compile fine. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7038): USB radio driver for Silicon Labs Si470x FM Radio ReceiversTobias Lorenz
this patch adds a new driver for the Silicon Labs Si470x FM Radio Receiver. It should also work for the identical ADS/Tech FM Radio Receiver (formerly Instant FM Music) as soon as I find out the USB Vendor and Product ID. The driver is inspired by several other USB and radio drivers, but mainly from the D-Link DSB-R100 USB radio (dsbr100.c). The USB stick currently has an Si4701 FM RDS radio receiver. But the other Si470x devices are pin and register compatible, so that in the future the driver can easily be patched to support these too. Therefore I named the driver radio-si470x and the configuration option usb-si470x. The driver itself just provides the control function over the radio. For getting audio back, the device support the USB audio class, which is implemented in the already existing driver. I tested the driver in the last days, until it now satisfies all my functionality and robustness requirements. The application I used for testing was kradio. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7037): Fix build breakage of the bttv driver, when advanced ↵Zoltan Devai
debugging is not enabled Signed-off-by: Zoltan Devai <zdevai@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7036): radio: Use video_device_release rather than kfreeJulia Lawall
The file drivers/media/video/videodev.c defines both video_device_alloc and video_device_release. These are essentially just kzmalloc and kfree, respectively, but it seems better to use video_device_release, as done in the other media files, rather than kfree, in case the implementation some day changes. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = video_device_alloc(...); if (E == NULL) S ... when != video_device_release(...,(T1)E,...) when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != video_device_release(...,(T2)E,...) when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7035): drivers/media/common: Add missing video_device_releaseJulia Lawall
Video_device_alloc returns the result of a kzalloc. In this case, the value is stored in a local variable which is not copied elsewhere before the point of the error return (video_register_device does not save its first argument anywhere if it returns a negative value). Thus, a video_device_release it needed before the error return. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = video_device_alloc(...); if (E == NULL) S ... when != video_device_release(...,(T1)E,...) when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != video_device_release(...,(T2)E,...) when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> CC: Oliver Endriss <o.endriss@gmx.de> CC: Michael Hunold <michael@mihu.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7032): tda18271: tda18271_cal_on_startup should be declared staticMichael Krufky
This module option variable is only handled within the file tda18271-fe.c - Declare this variable as static. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7030): Kconfig: add missing selections for VIDEO_PVRUSB2Michael Krufky
VIDEO_PVRUSB2 must select: VIDEO_SAA711X, VIDEO_CX25840, VIDEO_MSP3400, and VIDEO_WM8775 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7029): tda18271: provide a choice whether to perform rf cal on init ↵Michael Krufky
or on first tune If module option "cal" is set to 1, the ~22 sec rf tracking filter calibration sequence will be invoked on startup. Otherwise, the calibration will take place during the first tune. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7028): tda18271: test RF_CAL_OK to see if we need additional RF ↵Michael Krufky
calibration Test RF_CAL_OK to see if we need to perform the RF tracking filter calibration after returning from standby. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7027): tda18271: put the device in standby mode during sleep()Michael Krufky
Add function, tda18271_set_standby_mode. During sleep, enter standby mode with slave tuner output enabled, loop through on and xtal oscillator on. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7026): tda18271: report when the RF tracking filter calibration has ↵Michael Krufky
completed Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7024): usbvision: YUV to RGB conversion fixesThierry MERLE
All YUV to RGB conversions in usbvision were reverted (conversion to BGR but saying RGB to the application) Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Acked-by: Dwaine Garden <DwaineGarden@rogers.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7023): Fix a regresion left by changeset 7e65d6e8f6dfMauro Carvalho Chehab
Changeset 7e65d6e8f6df removed a very bad hack on mmap(). However, the fixes weren't considering usermap and overlay memory models. This were breaking direct reading from /dev/video?, used mostly by mpeg aware drivers. Thanks to Steven Toth <stoth@linuxtv.org> for reporting the issue and bissecting it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7022): Fix timestamp presentation on vivi driverMauro Carvalho Chehab
Due to date overflow, vivi were not working fine anymore. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7021): Move all board specific configuration to em28xx-cards.cMauro Carvalho Chehab
This cleanup moves the board-specific configurations to em28xx-cards.c. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7020): Add USB ID for a newer variant of Hauppauge WinTV USB2Mauro Carvalho Chehab
Thanks to Jeroen Janssen <Jeroen.Janssen@vub.ac.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7019): V4L: add support for Syntek DC1125 webcamsJaime Velasco Juan
This driver supports cameras with USB ID 174f:a311 or 05e1:0501, and the ov965x sensors. These devices are found in some Asus laptops and probably somewhere else. It is based on the stk11xx driver written by Nicolas Vivien Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7017): saa7134: add MSI TV@nywhere Plus with the older tda8275 tunerHermann Pitton
Thanks go to Mark Schultz for the initial contribution and to Dean Hilkewich for testing it again. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7016): saa7134: remove the Avermedia Super 007 from eeprom detectionHermann Pitton
saa7134: remove the Avermedia Super 007 from eeprom detection The card made it into the Philips' Tigers eeprom detection and falls through. Since it has attracted already others to follow, which are wrongly identified as TIGER_S then, move it to the usual analog initialization. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7014): cx23885: dprintk macro cleanupSteven Toth
Added missing do { } while (0) Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7013): bw-qcam: add module parameter 'force_init' to skip polite ↵Brett T. Warden
auto-detection prior to direct initialization Setting force_init=1 bypasses the friendly auto-detection by polling the status register, and instead attempts to initialize the qcam directly. Not friendly to other parallel devices, but much more reliable than the auto-detection. Signed-off-by: Brett T. Warden <brett.warden@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7011): cx23885: Cleanup of compiler defines and warningsSteven Toth
Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7010): cx23885: Small cleanupSteven Toth
cx23885: Small cleanup Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7009): cx23885: Video and VBI related filesSteven Toth
cx23885: Video and VBI related files. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7008): s5h1409: Ensure the silicon is initialized during attachSteven Toth
If not it impacts on analog tuner quality. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7007): cx23885: Add basic video support for the HVR1800Steven Toth
This enabled basic preview NTSC and PAL support for the HVR1800. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7006): cx23885: Track the board clock frequency and allow overridesSteven Toth
The cx23885/6/8 all have different clock rates, this patch allows the core to compensate, and developers to allow vendor specific overrides. This patches will be used by future analog video and encoder patches. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7005): cx23885: SRAM reallocation prior to analog video implementationSteven Toth
We need to clear space large enough for the video and encoder fifos. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7004): cx23885: Ensure HVR1800 TDA8295A is reset fully on module loadSteven Toth
Failure to do this means that a full system reboot is required if the part hangs. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7003): cx23885: Add support for device revision detectionSteven Toth
Each version of the cx23885/7/8 silicon has different build revs. We'll use this internal revision to work around bugs and known issues in the video and encoder related patches. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7002): cx25840: Add basic CX23885 AVCore supportSteven Toth
The cx23885/7/8 PCIe bridge has an internal AVCore modelled on the cx2584x family. Many of the registers positions are identical but some moved. The register values are also different because the different bridges run at different clock rates. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6997): Replace a very dirty hack on videobuf for a clean wait_eventMauro Carvalho Chehab
In order to videobuf_iolock to work, mmap_mapper should be called first. Otherwise, an OOPS is generated. On some cases, .mmap file handler used to took some time to be called. On those situations, mmap_mmapper() were called after iolock. This patch properly waits for mmap_mapper to be called, otherwise generating an error. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6995): ubvision: add adjust_X_Offset/adjust_Y_Offset parmsThierry MERLE
Add adjust_X_Offset/adjust_Y_Offset module parameters to allow users to tune X and Y picture offsets for their almost-working tuners without repetitive recompilation. Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6994): usbvision: add Pinnacle Studio PCTV USB (NTSC) FM V3Thierry MERLE
Add the "Pinnacle Studio PCTV USB (NTSC) FM" device. This is the third occurrence of the same device designation... Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6992): saa7134: remove Beholder devices without eeprom from auto ↵hermann pitton
detection As in the past, we should not allow to auto detect like this, since all saa7130 and saa7134 cards without eeprom will be detected as such Beholder cards then. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6989): tda18271: clean up chip id logic in tda829x_releaseMichael Krufky
This test is easier to read. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6988): tda18271: give calibration debug a separate debug maskMichael Krufky
We don't usually want to see the calibration debug messages, but sometimes it is useful. Assign it to a separate debug mask. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6987): tda18271: add support for fm radioMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6986): tda18271: share state between analog and digital tuner instancesMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6981): Fix bugzillas 9686 and 9691Mauro Carvalho Chehab
IR were not working for Winfast XP 2000 TV. Gabor Nyekhelyi <n0gabor@vipmail.hu> wrote a hack some time ago: http://marc.info/?l=linux-video&m=116362609323281&w=2 This patch fixes CodingStyle and commits the hack. I suspect that the proper solution would be to find the proper mask_keydown for this IR. Anyway, better to have this patch as a workaround. Thanks to Stafan Talpalaru <stefantalpalaru@yahoo.com> for pointing the issue. CC: Gabor Nyekhelyi <n0gabor@vipmail.hu> CC: Stafan Talpalaru <stefantalpalaru@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6979): tda18271: use a mutex to protect state in critical sectionsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-28 22:33:59 +0000