Age | Commit message (Collapse) | Author |
|
All that stuff should be enforced by device tree now, out with it
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Hum well that's the idea, Glamo did not play ball
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
We panic on SD boot now we changed Glamo order, because it
didn't succeed to bring up mmcblk0p1. But, if you do loglevel=8
then it works OK. So we are racing with something...
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Nasty temporary patch that is VERY useful, basically if you hit AUX key
during suspend time, it will force an OOPS, which due to another debug patch
forces a spew on serial console showing dmesg to date and the oops.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Backout from failed probe was quite broken.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
We shouldn't have to reset it in glamo probe
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Running heavily instrumented kernel, get report about glamo IRQ spinlock
probem.
[ 8.795000] =============================================
[ 8.795000] [ INFO: possible recursive locking detected ]
[ 8.795000] 2.6.24 #782
[ 8.795000] ---------------------------------------------
[ 8.795000] swapper/1 is trying to acquire lock:
[ 8.795000] (&irq_desc_lock_class){++..}, at: [<c0077ae4>] handle_level_irq+0x24/0x120
[ 8.795000]
[ 8.795000] but task is already holding lock:
[ 8.795000] (&irq_desc_lock_class){++..}, at: [<c01be628>] glamo_irq_demux_handler+0x24/0x140
[ 8.795000]
[ 8.795000] other info that might help us debug this:
[ 8.795000] 1 lock held by swapper/1:
[ 8.795000] #0: (&irq_desc_lock_class){++..}, at: [<c01be628>] glamo_irq_demux_handler+0x24/0x140
[ 8.795000]
[ 8.795000] stack backtrace:
[ 8.795000] [<c002ec28>] (dump_stack+0x0/0x14) from [<c006ad74>] (__lock_acquire+0x9a0/0xdec)
[ 8.795000] [<c006a3d4>] (__lock_acquire+0x0/0xdec) from [<c006b264>] (lock_acquire+0xa4/0xc0)
[ 8.795000] [<c006b1c0>] (lock_acquire+0x0/0xc0) from [<c02f7878>] (_spin_lock+0x44/0x78)
[ 8.795000] [<c02f7834>] (_spin_lock+0x0/0x78) from [<c0077ae4>] (handle_level_irq+0x24/0x120)
[ 8.795000] r6:c03e11c0 r5:0000005c r4:c03e11c0
[ 8.795000] [<c0077ac0>] (handle_level_irq+0x0/0x120) from [<c01be708>] (glamo_irq_demux_handler+0x104/0x140)
[ 8.795000] r7:00000038 r6:c03e11c0 r5:00000008 r4:c03e0560
[ 8.795000] [<c01be604>] (glamo_irq_demux_handler+0x0/0x140) from [<c003c934>] (s3c_irq_demux_extint8+0x94/0xa4)
[ 8.795000] r8:00000002 r7:00000003 r6:00000000 r5:c03df958 r4:00000000
[ 8.795000] [<c003c8a0>] (s3c_irq_demux_extint8+0x0/0xa4) from [<c0029048>] (__exception_text_start+0x48/0x64)
[ 8.795000] r4:00000015
[ 8.795000] [<c0029000>] (__exception_text_start+0x0/0x64) from [<c0029a5c>] (__irq_svc+0x3c/0xb4)
Patch removes desc->lock locking around glamo_irq_demux_handler... guess it is OK
since we didn't clear interrupt source, can't recurse?
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
If we ever fall through to the yield when we turned off interrupts...
it wouldn't be pretty.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Along the same lines as FIQ, HDQ can have children in device tree terms too.
Allow the same kind of callback in machine-specific code
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Trial to see if (mainly 32-bit) memcpy is any better than u16 loop
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
The delay versions of the access to registers were based on a misunderstanding of
the Glamo docs: it can force nWAIT differently depending on the access type. Therefore
we don't need to take special care about delays on CPU side.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Rather than using conservative default timings for the NAND flash,
use the timings as specified in the S3C2442B MCP data sheet.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Removed unused variable.
Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
|
|
The function glamo_mci_reset is not being used. Let's comment it out.
Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
|
|
This patch carries over the OpenMoko modifications at
include/asm-arm/arch-s3c2410/spi-gpio.h to
arch/arm/mach-s3c2410/include/mach/spi-gpio.h
Note: board_size and board_info have been removed upstream, but as we
still rely on them we'll just put them back for now. These will need to
be removed (and the corresponding driver changes made, of course) before
this can go upstream.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This pulls the Moko changes to regs-sdi.h that were in
include/asm-arm/arch-s3c2410 over to the file at arch/arm/../mach and
deletes the file at include/asm-arm.
Note: we have been using a mix of regs-sdi.h from the two different
locations. The unification of these two files may have some unknown
consequences... keep your eyes open for oddities after applying this.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Remove unneeded spaces and coding style fixes. Purely cosmetic.
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This file was moved in the big file move, but some OpenMoko specific
changes did not make it. This patch peels out the relevant bits and
adds them to the gpio.h file in the upstream location.
The only OpenMoko specific change is the definition of gpio_to_irq and
irq_to_gpio. These functions should really be defined in gpio_chip and
asm-generic/gpio.h; this is coming soon, but until then we'll just use
the Moko definitions that we've been using up until now.
This is not strictly correct for the GTA02 case, but it works given
the configuration that's currently in use. This can be fixed (and
should become evident) when the configuration options are cleaned up.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file is OpenMoko specific and didn't get moved in the big file
move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs
and fix the references to it.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
After the big include file move these paths ended up incorrect. Fix
these so that this builds cleanly again.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
buttons in FSO?]
Michael 'Mickey' Lauer wrote:
...
> The problem is (and this is the reason why I'm crossposting this to the
> kernel mailing list), the kernel is not swallowing the power button
> presses that triggers the resume, so you need some "real" programming
> (as opposed to the expressional complexity of our rules) in order to
> prevent falling asleep right after resume.
>
> Kernel-guys, can we change that?
suppress-resume-onkey-event.patch
This suppresses the key press and key release events from the
power button, in the case where the power button is the wake
event for the GTA01 or GTA02 device.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
LED trigger gets removed in led_brightness_store???
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
Move to level from edge, fix local_save... to local_irq...
simplify bitbang sequence
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
Remove unsued PWM stuff around LEDs.
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
Adds AC and USB powersupply objects, and a workqueue to automonitor
changes in battery state and fire change events on any change to
selected registers.
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
Add /sys files for jack state reporting.
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
This patch implements fb_blank() for the glamo-fb driver, which switches off
the pixel clock (DCLK) for power saving.
We currently delay the actual pixel clock switch until we enter
FB_BLANK_POWERDOWN, since the backlight fade is slow and we don't want the
user to see artefacts on the screen while the backlight is fading out.
So since the X server first sends FB_BLANK_{V,H}SYNC_SUSPEND, we start the
backlight fade here, and only once we get FB_BLANK_POWERDOWN the pixel clock is
disabled.
There are no measurements yet, but the power savings should be double, since
there is no longer any generation of the high-frequency LCM signals, and
there are no video-related SDRAM accesses anymore.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
the comment claims that DHCLK is enabled, while the
code actually disables it.
No code change, purely cosmetic patch.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
Remove dead code and coding style fixes. Purely cosmetic.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
Qi does not touch the backlight, we have to do it in Linux now
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
FB_BLANK events and switch the JBT6K74 LCM controller into
its power saving mode.
This has the potential of saving something like 50mW during screen blank.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
Thomas White noticed that the recent patch from Andrzej cleaning up a
nasty cast in the resume_dependency stuff for Glamo broke resume. The
problem was that the wrong resume callback was arrived at by the new
code, the one in the device's device_driver struct rather than the
struct platform_driver that actually holds the right pointer.
Since this code will be gone in 2.6.26, I reverted this part of Andrzej's
patch, tidying the cast a bit anyway.
Reported-by: Thomas White <taw27@cam.ac.uk>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This function (set_brightness) may be called in interrupt context and
therefore should not sleep; use a spin_lock instead of a mutex to ensure
this.
This should take care of the following BUG:
[21474678.340000] BUG: sleeping function called from invalid context at kernel/mutex.c:207
[21474678.340000] in_atomic():1, irqs_disabled():0
[21474678.340000] no locks held by python/1255.
[21474678.340000] [<c002d928>] (dump_stack+0x0/0x18) from [<c003b08c>] (__might_sleep+0xdc/0xf8)
[21474678.340000] [<c003afb0>] (__might_sleep+0x0/0xf8) from [<c02efc08>] (mutex_lock_nested+0x2c/0x264)
[21474678.340000] r5:c03ed754 r4:c03ed6dc
[21474678.340000] [<c02efbdc>] (mutex_lock_nested+0x0/0x264) from [<c022e180>] (neo1973_vib_vib_set+0x2c/0x6c)
[21474678.340000] [<c022e154>] (neo1973_vib_vib_set+0x0/0x6c) from [<c022e6a4>] (led_timer_function+0x8c/0xb4)
[21474678.340000] r6:c041a1a0 r5:c7f34820 r4:0000012c
[21474678.340000] [<c022e618>] (led_timer_function+0x0/0xb4) from [<c004aeb4>] (run_timer_softirq+0x180/0x20c)
[21474678.340000] r5:c7f3482c r4:00000102
[21474678.340000] [<c004ad34>] (run_timer_softirq+0x0/0x20c) from [<c0046368>] (__do_softirq+0x64/0xd8)
[21474678.340000] r8:00000000 r7:00000001 r6:0000000a r5:c0419ff8 r4:00000041
[21474678.340000] [<c0046304>] (__do_softirq+0x0/0xd8) from [<c0046764>] (irq_exit+0x48/0x5c)
[21474678.340000] r6:00000000 r5:c03d128c r4:0000001e
[21474678.340000] [<c004671c>] (irq_exit+0x0/0x5c) from [<c0028050>] (__exception_text_start+0x50/0x68)
[21474678.340000] [<c0028000>] (__exception_text_start+0x0/0x68) from [<c0028a8c>] (__irq_usr+0x4c/0xe0)
[21474678.340000] Exception stack(0xc7d7bfb0 to 0xc7d7bff8)
[21474678.340000] bfa0: 0055bb3a 0000004a 00000000 0055baf0
[21474678.340000] bfc0: 0000004a 0052ae30 00000025 005168e0 00000073 00000025 401281ec 00000000
[21474678.340000] bfe0: 0000006f be9b8470 006e0069 400a8844 60000010 ffffffff
[21474678.340000] r6:00004000 r5:f4000000 r4:ffffffff
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
When the config option MACH_NEO1973_GTA02 is not set, then we do not need to
have any access to the FIQ symbols.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Attached is a patch that has greatly reduced the frequency of failures
to resume (due to an oops from the glamo resume handler), and the
dreaded "white screen after resume". I can't say that it fixes all of
these, although I have yet to see the white-screen since applying this
patch and suspending/resuming several hundred times (with the 30-second
suspend on the 2008.8 image and the endless stream of GSM error messages
generated by something in that image, it has proved to be very useful to
do an automated stress test!)
This patch will apply to stable, and should make stable slightly more,
well, "stable".
[Feel free to remove the debug messages if someone feels strongly about
that; I left them in because I think they might be useful in triaging
further crashes; I'm not at all convinced that this patch will fix all
the cases of resume failures.]
[[And, yes, this is ugly, really ugly.]]
[[[Oh yeah - there's still one extreme case that will result in an oops:
if a dependent driver is built as a module, and it is unloaded, and it
happened that the preceding suspend/resume was aborted, and that abort
happened between the dependent driver and the driver upon which it is
dependent, then a list entry will be left behind referencing the
unloaded module. There's just no good way to fix that given the way the
resume dependency plumbing is connected up right now, so just avoid
using modules for any of the drivers involved in the resume dependency
stuff.]]]
Regards,
Mike (mwester)
commit 905d2fc9c45f622418ce9ef4e67c23453aab7571
Author: Mike Westerhof <mwester@dls.net>
Date: Mon Aug 11 11:11:25 2008 -0500
always-call-resume-dependencies.patch
Ensure that a dependent resume handler is always executed,
even if the resume handler for driver upon which it is
dependent never suspends (and therefore never resumes either).
Also make sure that we do not end up with duplicate
dependencies registered, something that can happen if the
suspend is aborted due to driver failure or an early resume
(such as occurs when the GSM interrupts during suspend).
Signed-off-by: Mike Westerhof <mwester@dls.net>
|