aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-12-11sdio_uart: use tty_portAlan Cox
Add a tty_port object to the sdio uart. For the moment just begin using the tty field of the port, as this is the critical one to clean up. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty_port: Move hupcl handlingAlan Cox
Move the HUCPL handling from the end of close_port_start to the beginning of close_port_end. What this actually does is change the ordering from port shutdown port->dtr_rts to port->dtr_rts port shutdown Some hardware drops the physical connection on shutdown so we must perform the port operations before the shutdown. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Serial: Do not read IIR in serial8250_start_tx when UART_BUG_TXENIan Jackson
Do not read IIR in serial8250_start_tx when UART_BUG_TXEN Reading the IIR clears some oustanding interrupts so it is not safe. Instead, simply transmit immediately if the buffer is empty without regard to IIR. Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Serial: pxa: work around Errata #75Uwe Kleine-König
Intel(R) PXA27x Processor Family Specification Update (Nov 2005) says: E75. UART: Baud rate may not be programmed correctly on back-to-back writes. Problem: When programming the Divisor Latch registers, Low and High (DLL and DLH), with back-to-back writes, the second register write may not take effect. The result is an incorrect baud rate. Workaround: After programming the first Divisor Latch register, read and verify it before programming the second Divisor Latch register. This was hit when changing the baud rate from 115200 to 9600 while receiving characters at 9600 Bd. And fixed indention of some comments nearby. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11serial, 8250: calculate irqflags bitmask before loopAndré Goddard Rosa
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11serial: cascade needless conditionalsAndré Goddard Rosa
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11serial: fix NULL pointer dereferenceAndré Goddard Rosa
If kzalloc() or alloc_tty_driver() fails, we call: put_tty_driver(normal = NULL). Then: put_tty_driver -> tty_driver_kref_put -> kref_put(&NULL->kref, ...) Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11opticon: Fix resume logicAlan Cox
Opticon now takes the right mutex to check the port status but the status check is done wrongly for the modern serial code, so fix it. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11usb_serial: Kill port mutexAlan Cox
The tty port has a port mutex used for all the port related locking so we don't need the one in the USB serial layer any more. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11usb_serial: Use the shutdown() operationAlan Cox
As Alan Stern pointed out - now we have tty_port_open the shutdown method and locking allow us to whack the other bits into the full helper methods and provide a shutdown op which the tty port code will synchronize with setup for us. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty_port: coding style cleaning passAlan Cox
Mind the hoover wire... Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty_port: add "tty_port_open" helperAlan Cox
For the moment this just moves the USB logic over and fixes the 'what if we open and hangup at the same time' race noticed by Oliver Neukum. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: stallion: kill BKL ioctlAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: istallion: Kill off the BKL ioctlAlan Cox
Fairly trivial as the BKL push down into the methods has already been done. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: esp: remove broken driverAlan Cox
The ESP driver has been marked broken for years. It's an old ISA device that clearly nobody cares about any more. Remove it Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: const: constify remaining tty_operationsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11jsm: adding EEH handlersBreno Leitao
Adding EEH handlers for the serial jsm driver. This patch adds the PCI error handlers and also register them to be called when a error is detected. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Scott Kilau <scottk@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11jsm: removing the field jsm_board->intr_countBreno Leitão
Currently there is a field in the jsm_board structure to cont the number of interrupt that the card recevived, but it's not working properly when the IRQ line is shared, and also nowhere else this field is used. So, This patch is removing it. Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <Scott.Kilau@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11jsm: Removing unused jsm_channel->ch_wopen fieldBreno Leitão
Currently the jsm_channel->ch_wopen field is defined and never used. So, this patch removes it. Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <Scott.Kilau@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11jsm: Remove ch_cpstime fieldBreno Leitão
Currently the field jsm_channel->ch_cpstime is defined but never used, so this patch removes it. Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <Scott.Kilau@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11jsm: removing ch_old_baud fieldBreno Leitão
Currently the field jsm_channel->ch_old_baud is not used, just assigned in a lot of places but never used. This patches removes this field. Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <scottk@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11jsm: remove the ch_custom_speed fieldBreno Leitão
Currently the ch_custom_speed field exists but is never used, so, this patch removes it. Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <scottk@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11jsm: Rewriting a bad log messageBreno Leitão
Actually jsm displays "Device Added" 8 times (for a 8 port device). This silly patch just makes things more informative, showing the port (instead of the device) that was added. Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <scottk@digi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11jsm: IRQ handlers doesn't need to have IRQ_DISABLED enabledBreno Leitão
Currently jsm is showing the following message when loaded: IRQ 432/JSM: IRQF_DISABLED is not guaranteed on shared IRQs It's because the request_irq() is called using IRQF_DISABLED and IRQF_SHARED. Actually there is no need to use IRQF_DISABLED in this driver. Signed-off-by: Breno Leitão <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <scottk@digi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11can: add the driver for Analog Devices Blackfin on-chip CAN controllersBarry Song
Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: H.J. Oertel <oe@port.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11cxgb3: Fixing EEH handlersBreno Leitao
After commit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff ("PCI: Clear saved_state after the state has been restored"), the EEH is not working proplery on cxgb3. This patch fixes it, always saving the PCI state after a recovery, in order to allow further reoveries. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11cnic: Zero out status block and Event Queue indices.Michael Chan
To prevent stale indices from causing spurious events when restarting the bnx2x devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11cnic: Send delete command when shutting down iSCSI ring.Michael Chan
This step is necessary on the bnx2x devices when restarting the iSCSI ring. Without it, the firmware can assert and cause bnx2x to report errors. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11net: smc91x: Fix up type mismatch in smc_drv_resume().Paul Mundt
smc_drv_resume() takes a struct device, while smc_enable_device() takes a platform device. This fixes up the smc_enable_device() callsite with the proper pointer. It's not obvious when this change was introduced, as git history doesn't go back that far. Presumably the resume code has always been broken in this fashion. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11smc91x: fix unused flags warnings on UP systemsMike Frysinger
Local flags variables will be declared whenever these functions get used, but obviously on UP systems the flags parameter won't be touched. So add some dummy ops that get optimized away anyways to satisfy gcc's warnings. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11net: Add missing TST_CFG_WRITE bits around sky2_pci_writeTakashi Iwai
Add missing TST_CFG_WRITE bits around sky2_pci_write*() in Optima setup routines. Without the cfg-write bits, the driver may spew endless link-up messages through qlink irq. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11net: Fix Yukon-2 Optima TCP offload setupTakashi Iwai
Fix the TCP offload setup for Yukon-2 Optima. It requires SKY2_HW_NE_LE flag unlike Ultra 2. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11Merge branch 'drm-nouveau-pony' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-nouveau-pony' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/nouveau: Add DRM driver for NVIDIA GPUs
2009-12-11Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/ttm: export some functions useful to drivers using ttm drm/radeon/kms/avivo: fix typo in new_pll module description drm/radeon/kms: Convert radeon to new ttm_bo_init drm/ttm: Convert ttm_buffer_object_init to use ttm_placement
2009-12-11Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-12-11firewire: ohci: handle receive packets with a data length of zeroJay Fenlason
Queueing to receive an ISO packet with a payload length of zero silently does nothing in dualbuffer mode, and crashes the kernel in packet-per-buffer mode. Return an error in dualbuffer mode, because the DMA controller won't let us do what we want, and work correctly in packet-per-buffer mode. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: stable@kernel.org
2009-12-11Staging: IIO: add selection of IIO_SW_RING to LIS3L02DQ as neededJonathan Cameron
Here I've kept the selection of IIO_SW_RING separate from IIO_TRIGGER as it will go away fairly shortly when the ring buffer type becomes configurable on a per device basis, whereas the IIO_TRIGGER select will remain. Whether to retain the option to remove the support for ring buffers entirely is one for after that support is in place. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: IIO: Add tsl2560-2 support to tsl2563 driver.Jonathan Cameron
Minimal changes to driver. Just adds the device to the id table and adjusts the Kconfig elements appropriately. Adding further similar chips from TAOS is complicated by their different conversion functions (and hence left for now). Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: IIO: Remove tsl2561 driver. Support merged with tsl2563.Jonathan Cameron
This patch simply removes the tsl2561 driver. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Amit Kucheria <amit.kucheria@verdurent.com>
2009-12-11Staging: wlags49_h2: fix up signal levelsHenk de Groot
Adjusts the signal levels reported by the wlags49_h2 and wlags49_h25 staging drivers. With the constants supplied by Agere the signal levels are always poor, even in close proximity to the AP. The signals are now measured with a real device. 100% for close proximity to the AP, 0% for the noice floor. Now the levels shown by the NetworkManager gauge make sense. Some magic numbers in the related code are replaced by the correct constants from the wireless extension interface (wireless.h). Also the flag IW_QUAL_DBM is now set, as specified in the wireless.h header file. Signed-off-by: Henk de Groot <pe1dnn@amsat.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11+ drivers-staging-wlags49_h2-remove-cvs-metadata.patch added to -mm treeAndrew Morton
Cc: Henk de Groot <pe1dnn@amsat.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: samsung-laptop: add TODO fileGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: samsung-laptop: remove old kernel codeGreg Kroah-Hartman
Don't test for the kernel version, we know what version we are in, the latest. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: add Samsung Laptop driverGreg Kroah-Hartman
This is a drive for the Samsung N128 laptop to control the wireless LED and backlight. Many thanks to Joey Lee for his help in testing and finding all of my bugs in the development of this driver, it has been invaluable. Cc: Joey Lee <jlee@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11staging: batman-adv meshing protocolAndrew Lunn
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. This is the first submission for inclusion in staging. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: rtl8192u: depends on USBRandy Dunlap
rtl8192u uses usb_* interfaces so it should depend on USB. ERROR: "usb_kill_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined! ERROR: "usb_deregister" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined! ERROR: "usb_control_msg" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined! ERROR: "usb_submit_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined! ERROR: "usb_register_driver" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined! ERROR: "usb_free_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined! ERROR: "usb_alloc_urb" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: rtl8192u: remove dead codeMauro Carvalho Chehab
Remove #ifse against older kernel versions; Remove codes marked with #if 0; Remove #if 1 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: rtl8192u: remove bad whitespacesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: rtl8192u: make it compileMauro Carvalho Chehab
Add it to staging Kbuild and fixes some API differences that prevents compilation. It seems that the ieee80211 stack is very close to rtl8192su one. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: Added Realtek rtl8192u driver to stagingJerry Chuang
Add Realtek linux driver for rtl8192u as provided by Realtek rtl8192u_linux_2.6.0006.1031.2008.tar.gz, send to me C/C staging ML. This version won't compile against upstream, doesn't follow Linux CodingStyle and has their own ieee80211 stack. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-25 08:38:34 +0000