aboutsummaryrefslogtreecommitdiff
path: root/fs/btrfs/extent-tree.c
AgeCommit message (Collapse)Author
2009-06-11Btrfs: check duplicate backrefs for both data and metadataYan Zheng
lookup_inline_extent_backref only checks for duplicate backref for data extents. It assumes backrefs for tree block never conflict. This patch makes lookup_inline_extent_backref check for duplicate backrefs for both data and tree block, so that we can detect potential bug earlier. This is a safety check, strictly speaking it is not required. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10Btrfs: remove crc32c.h and use libcrc32c directly.David Woodhouse
There's no need to preserve this abstraction; it used to let us use hardware crc32c support directly, but libcrc32c is already doing that for us through the crypto API -- so we're already using the Intel crc32c acceleration where appropriate. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10Btrfs: add mount -o ssd_spread to spread allocations outChris Mason
Some SSDs perform best when reusing block numbers often, while others perform much better when clustering strictly allocates big chunks of unused space. The default mount -o ssd will find rough groupings of blocks where there are a bunch of free blocks that might have some allocated blocks mixed in. mount -o ssd_spread will make sure there are no allocated blocks mixed in. It should perform better on lower end SSDs. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)Yan Zheng
This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-04Btrfs: Fix oops and use after free during space balancingChris Mason
The btrfs allocator uses list_for_each to walk the available block groups when searching for free blocks. It starts off with a hint to help find the best block group for a given allocation. The hint is resolved into a block group, but we don't properly check to make sure the block group we find isn't in the middle of being freed due to filesystem shrinking or balancing. If it is being freed, the list pointers in it are bogus and can't be trusted. But, the code happily goes along and uses them in the list_for_each loop, leading to all kinds of fun. The fix used here is to check to make sure the block group we find really is on the list before we use it. list_del_init is used when removing it from the list, so we can do a proper check. The allocation clustering code has a similar bug where it will trust the block group in the current free space cluster. If our allocation flags have changed (going from single spindle dup to raid1 for example) because the drives in the FS have changed, we're not allowed to use the old block group any more. The fix used here is to check the current cluster against the current allocation flags. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14Btrfs: Spelling fix in btrfs_lookup_first_block_group commentsSankar P
Signed-off-by: Sankar P <sankar.curiosity@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27Btrfs: Fix a bunch of printk() warnings.Joel Becker
Just happened to notice a bunch of %llu vs u64 warnings. Here's a patch to cast them all. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24Btrfs: try to keep a healthy ratio of metadata vs data block groupsJosef Bacik
This patch makes the chunk allocator keep a good ratio of metadata vs data block groups. By default for every 8 data block groups, we'll allocate 1 metadata chunk, or about 12% of the disk will be allocated for metadata. This can be changed by specifying the metadata_ratio mount option. This is simply the number of data block groups that have to be allocated to force a metadata chunk allocation. By making sure we allocate metadata chunks more often, we are less likely to get into situations where the whole disk has been allocated as data block groups. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03Btrfs: rework allocation clusteringChris Mason
Because btrfs is copy-on-write, we end up picking new locations for blocks very often. This makes it fairly difficult to maintain perfect read patterns over time, but we can at least do some optimizations for writes. This is done today by remembering the last place we allocated and trying to find a free space hole big enough to hold more than just one allocation. The end result is that we tend to write sequentially to the drive. This happens all the time for metadata and it happens for data when mounted -o ssd. But, the way we record it is fairly racey and it tends to fragment the free space over time because we are trying to allocate fairly large areas at once. This commit gets rid of the races by adding a free space cluster object with dedicated locking to make sure that only one process at a time is out replacing the cluster. The free space fragmentation is somewhat solved by allowing a cluster to be comprised of smaller free space extents. This part definitely adds some CPU time to the cluster allocations, but it allows the allocator to consume the small holes left behind by cow. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03Btrfs: kill the pinned_mutexJosef Bacik
This patch removes the pinned_mutex. The extent io map has an internal tree lock that protects the tree itself, and since we only copy the extent io map when we are committing the transaction we don't need it there. We also don't need it when caching the block group since searching through the tree is also protected by the internal map spin lock. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-04-03Btrfs: kill the block group alloc mutexJosef Bacik
This patch removes the block group alloc mutex used to protect the free space tree for allocations and replaces it with a spin lock which is used only to protect the free space rb tree. This means we only take the lock when we are directly manipulating the tree, which makes us a touch faster with multi-threaded workloads. This patch also gets rid of btrfs_find_free_space and replaces it with btrfs_find_space_for_alloc, which takes the number of bytes you want to allocate, and empty_size, which is used to indicate how much free space should be at the end of the allocation. It will return an offset for the allocator to use. If we don't end up using it we _must_ call btrfs_add_free_space to put it back. This is the tradeoff to kill the alloc_mutex, since we need to make sure nobody else comes along and takes our space. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-04-03Btrfs: clean up find_free_extentJosef Bacik
I've replaced the strange looping constructs with a list_for_each_entry on space_info->block_groups. If we have a hint we just jump into the loop with the block group and start looking for space. If we don't find anything we start at the beginning and start looking. We never come out of the loop with a ref on the block_group _unless_ we found space to use, then we drop it after we set the trans block_group. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-04-03Btrfs: free space cache cleanupsJosef Bacik
This patch cleans up the free space cache code a bit. It better documents the idiosyncrasies of tree_search_offset and makes the code make a bit more sense. I took out the info allocation at the start of __btrfs_add_free_space and put it where it makes more sense. This was left over cruft from when alloc_mutex existed. Also all of the re-searches we do to make sure we inserted properly. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-03-31Btrfs: try to free metadata pages when we free btree blocksChris Mason
COW means we cycle though blocks fairly quickly, and once we free an extent on disk, it doesn't make much sense to keep the pages around. This commit tries to immediately free the page when we free the extent, which lowers our memory footprint significantly. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24Btrfs: tree logging unlink/rename fixesChris Mason
The tree logging code allows individual files or directories to be logged without including operations on other files and directories in the FS. It tries to commit the minimal set of changes to disk in order to fsync the single file or directory that was sent to fsync or O_SYNC. The tree logging code was allowing files and directories to be unlinked if they were part of a rename operation where only one directory in the rename was in the fsync log. This patch adds a few new rules to the tree logging. 1) on rename or unlink, if the inode being unlinked isn't in the fsync log, we must force a full commit before doing an fsync of the directory where the unlink was done. The commit isn't done during the unlink, but it is forced the next time we try to log the parent directory. Solution: record transid of last unlink/rename per directory when the directory wasn't already logged. For renames this is only done when renaming to a different directory. mkdir foo/some_dir normal commit rename foo/some_dir foo2/some_dir mkdir foo/some_dir fsync foo/some_dir/some_file The fsync above will unlink the original some_dir without recording it in its new location (foo2). After a crash, some_dir will be gone unless the fsync of some_file forces a full commit 2) we must log any new names for any file or dir that is in the fsync log. This way we make sure not to lose files that are unlinked during the same transaction. 2a) we must log any new names for any file or dir during rename when the directory they are being removed from was logged. 2a is actually the more important variant. Without the extra logging a crash might unlink the old name without recreating the new one 3) after a crash, we must go through any directories with a link count of zero and redo the rm -rf mkdir f1/foo normal commit rm -rf f1/foo fsync(f1) The directory f1 was fully removed from the FS, but fsync was never called on f1, only its parent dir. After a crash the rm -rf must be replayed. This must be able to recurse down the entire directory tree. The inode link count fixup code takes care of the ugly details. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24Btrfs: leave btree locks spinning more oftenChris Mason
btrfs_mark_buffer dirty would set dirty bits in the extent_io tree for the buffers it was dirtying. This may require a kmalloc and it was not atomic. So, anyone who called btrfs_mark_buffer_dirty had to set any btree locks they were holding to blocking first. This commit changes dirty tracking for extent buffers to just use a flag in the extent buffer. Now that we have one and only one extent buffer per page, this can be safely done without losing dirty bits along the way. This also introduces a path->leave_spinning flag that callers of btrfs_search_slot can use to indicate they will properly deal with a path returned where all the locks are spinning instead of blocking. Many of the btree search callers now expect spinning paths, resulting in better btree concurrency overall. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24Btrfs: reduce stalls during transaction commitChris Mason
To avoid deadlocks and reduce latencies during some critical operations, some transaction writers are allowed to jump into the running transaction and make it run a little longer, while others sit around and wait for the commit to finish. This is a bit unfair, especially when the callers that jump in do a bunch of IO that makes all the others procs on the box wait. This commit reduces the stalls this produces by pre-reading file extent pointers during btrfs_finish_ordered_io before the transaction is joined. It also tunes the drop_snapshot code to politely wait for transactions that have started writing out their delayed refs to finish. This avoids new delayed refs being flooded into the queue while we're trying to close off the transaction. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24Btrfs: process the delayed reference queue in clustersChris Mason
The delayed reference queue maintains pending operations that need to be done to the extent allocation tree. These are processed by finding records in the tree that are not currently being processed one at a time. This is slow because it uses lots of time searching through the rbtree and because it creates lock contention on the extent allocation tree when lots of different procs are running delayed refs at the same time. This commit changes things to grab a cluster of refs for processing, using a cursor into the rbtree as the starting point of the next search. This way we walk smoothly through the rbtree. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24Btrfs: try to cleanup delayed refs while freeing extentsChris Mason
When extents are freed, it is likely that we've removed the last delayed reference update for the extent. This checks the delayed ref tree when things are freed, and if no ref updates area left it immediately processes the delayed ref. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24Btrfs: do extent allocation and reference count updates in the backgroundChris Mason
The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-10Btrfs: Fix locking around adding new space_infoChris Mason
Storage allocated to different raid levels in btrfs is tracked by a btrfs_space_info structure, and all of the current space_infos are collected into a list_head. Most filesystems have 3 or 4 of these structs total, and the list is only changed when new raid levels are added or at unmount time. This commit adds rcu locking on the list head, and properly frees things at unmount time. It also clears the space_info->full flag whenever new space is added to the FS. The locking for the space info list goes like this: reads: protected by rcu_read_lock() writes: protected by the chunk_mutex At unmount time we don't need special locking because all the readers are gone. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-09Btrfs: fix spinlock assertions on UP systemsChris Mason
btrfs_tree_locked was being used to make sure a given extent_buffer was properly locked in a few places. But, it wasn't correct for UP compiled kernels. This switches it to using assert_spin_locked instead, and renames it to btrfs_assert_tree_locked to better reflect how it was really being used. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-20Btrfs: try committing transaction before returning ENOSPCJosef Bacik
This fixes a problem where we could return -ENOSPC when we may actually have plenty of space, the space is just pinned. Instead of returning -ENOSPC immediately, commit the transaction first and then try and do the allocation again. This patch also does chunk allocation for metadata if we pass the 80% threshold for metadata space. This will help with stack usage since the chunk allocation will happen early on, instead of when the allocation is happening. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-02-20Btrfs: add better -ENOSPC handlingJosef Bacik
This is a step in the direction of better -ENOSPC handling. Instead of checking the global bytes counter we check the space_info bytes counters to make sure we have enough space. If we don't we go ahead and try to allocate a new chunk, and then if that fails we return -ENOSPC. This patch adds two counters to btrfs_space_info, bytes_delalloc and bytes_may_use. bytes_delalloc account for extents we've actually setup for delalloc and will be allocated at some point down the line. bytes_may_use is to keep track of how many bytes we may use for delalloc at some point. When we actually set the extent_bit for the delalloc bytes we subtract the reserved bytes from the bytes_may_use counter. This keeps us from not actually being able to allocate space for any delalloc bytes. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-02-12Btrfs: hold trans_mutex when using btrfs_record_root_in_transYan Zheng
btrfs_record_root_in_trans needs the trans_mutex held to make sure two callers don't race to setup the root in a given transaction. This adds it to all the places that were missing it. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-02-12Btrfs: make a lockdep class for the extent buffer locksChris Mason
Btrfs is currently using spin_lock_nested with a nested value based on the tree depth of the block. But, this doesn't quite work because the max tree depth is bigger than what spin_lock_nested can deal with, and because locks are sometimes taken before the level field is filled in. The solution here is to use lockdep_set_class_and_name instead, and to set the class before unlocking the pages when the block is read from the disk and just after init of a freshly allocated tree block. btrfs_clear_path_blocking is also changed to take the locks in the proper order, and it also makes sure all the locks currently held are properly set to blocking before it tries to retake the spinlocks. Otherwise, lockdep gets upset about bad lock orderin. The lockdep magic cam from Peter Zijlstra <peterz@infradead.org> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12Btrfs: use larger metadata clusters in ssd modeChris Mason
Larger metadata clusters can significantly improve writeback performance on ssd drives with large erasure blocks. The larger clusters make it more likely a given IO will completely overwrite the ssd block, so it doesn't have to do an internal rwm cycle. On spinning media, lager metadata clusters end up spreading out the metadata more over time, which makes fsck slower, so we don't want this to be the default. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12Btrfs: make sure all pending extent operations are completeJosef Bacik
Theres a slight problem with finish_current_insert, if we set all to 1 and then go through and don't actually skip any of the extents on the pending list, we could exit right after we've added new extents. This is a problem because by inserting the new extents we could have gotten new COW's to happen and such, so we may have some pending updates to do or even more inserts to do after that. So this patch will only exit if we have never skipped any of the extents in the pending list, and we have no extents to insert, this will make sure that all of the pending work is truly done before we return. I've been running with this patch for a few days with all of my other testing and have not seen issues. Thanks, Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-02-05Btrfs: Fix memory leak in cache_drop_leaf_refChris Mason
The code wasn't doing a kfree on the sorted array Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04Btrfs: Make btrfs_drop_snapshot work in larger and more efficient chunksChris Mason
Every transaction in btrfs creates a new snapshot, and then schedules the snapshot from the last transaction for deletion. Snapshot deletion works by walking down the btree and dropping the reference counts on each btree block during the walk. If if a given leaf or node has a reference count greater than one, the reference count is decremented and the subtree pointed to by that node is ignored. If the reference count is one, walking continues down into that node or leaf, and the references of everything it points to are decremented. The old code would try to work in small pieces, walking down the tree until it found the lowest leaf or node to free and then returning. This was very friendly to the rest of the FS because it didn't have a huge impact on other operations. But it wouldn't always keep up with the rate that new commits added new snapshots for deletion, and it wasn't very optimal for the extent allocation tree because it wasn't finding leaves that were close together on disk and processing them at the same time. This changes things to walk down to a level 1 node and then process it in bulk. All the leaf pointers are sorted and the leaves are dropped in order based on their extent number. The extent allocation tree and commit code are now fast enough for this kind of bulk processing to work without slowing the rest of the FS down. Overall it does less IO and is better able to keep up with snapshot deletions under high load. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04Btrfs: Change btree locking to use explicit blocking pointsChris Mason
Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04Btrfs: sort references by byte number during btrfs_inc_refChris Mason
When a block goes through cow, we update the reference counts of everything that block points to. The internal pointers of the block can be in just about any order, and it is likely to have clusters of things that are close together and clusters of things that are not. To help reduce the seeks that come with updating all of these reference counts, sort them by byte number before actual updates are done. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-21Btrfs: fix tree logs parallel syncYan Zheng
To improve performance, btrfs_sync_log merges tree log sync requests. But it wrongly merges sync requests for different tree logs. If multiple tree logs are synced at the same time, only one of them actually gets synced. This patch has following changes to fix the bug: Move most tree log related fields in btrfs_fs_info to btrfs_root. This allows merging sync requests separately for each tree log. Don't insert root item into the log root tree immediately after log tree is allocated. Root item for log tree is inserted when log tree get synced for the first time. This allows syncing the log root tree without first syncing all log trees. At tree-log sync, btrfs_sync_log first sync the log tree; then updates corresponding root item in the log root tree; sync the log root tree; then update the super block. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-01-21Btrfs: fix stop searching test in replace_one_extentYan Zheng
replace_one_extent searches tree leaves for references to a given extent. It stops searching if it goes beyond the last possible position. The last possible position is computed by adding the starting offset of a found file extent to the full size of the extent. The code uses physical size of the extent as the full size. This is incorrect when compression is used. The fix is get the full size from ram_bytes field of file extent item. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-01-21Btrfs: remove duplicated #includeHuang Weiyi
Removed duplicated #include "compat.h"in fs/btrfs/extent-tree.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-21Btrfs: Fix infinite loop in btrfs_extent_post_opYan Zheng
btrfs_extent_post_op calls finish_current_insert and del_pending_extents. They both may enter infinite loops. finish_current_insert enters infinite loop if it only finds some backrefs to update. The fix is to check for pending backref updates before restarting the loop. The infinite loop in del_pending_extents is due to a the skipped variable not being properly reset before looping around. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-01-21Btrfs: fix locking issue in btrfs_remove_block_groupYan Zheng
We should hold the block_group_cache_lock while modifying the block groups red-black tree. Thank you, Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-01-21Btrfs: simplify iteration codesQinghuang Feng
Merge list_for_each* and list_entry to list_for_each_entry* Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-21Btrfs: removed unused #include <version.h>'sHuang Weiyi
Removed unused #include <version.h>'s in btrfs Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-06Btrfs: tree logging checksum fixesYan Zheng
This patch contains following things. 1) Limit the max size of btrfs_ordered_sum structure to PAGE_SIZE. This struct is kmalloced so we want to keep it reasonable. 2) Replace copy_extent_csums by btrfs_lookup_csums_range. This was duplicated code in tree-log.c 3) Remove replay_one_csum. csum items are replayed at the same time as replaying file extents. This guarantees we only replay useful csums. 4) nbytes accounting fix. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-01-06Btrfs: drop remaining LINUX_KERNEL_VERSION checks and compat codeChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-05Btrfs: Fix checkpatch.pl warningsChris Mason
There were many, most are fixed now. struct-funcs.c generates some warnings but these are bogus. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-05Btrfs: Fix free block discard calls down to the block layerLiu Hui
This is a patch to fix discard semantic to make Btrfs work with FTL and SSD. We can improve FTL's performance by telling it which sectors are freed by file system. But if we don't tell FTL the information of free sectors in proper time, the transaction mechanism of Btrfs will be destroyed and Btrfs could not roll back the previous transaction under the power loss condition. There are some problems in the old implementation: 1, In __free_extent(), the pinned down extents should not be discarded. 2, In free_extents(), the free extents are all pinned, so they need to be discarded in transaction committing time instead of free_extents(). 3, The reserved extent used by log tree should be discard too. This patch change discard behavior as follows: 1, For the extents which need to be free at once, we discard them in update_block_group(). 2, Delay discarding the pinned extent in btrfs_finish_extent_commit() when committing transaction. 3, Remove discarding from free_extents() and __free_extent() 4, Add discard interface into btrfs_free_reserved_extent() 5, Discard sectors before updating the free space cache, otherwise, FTL will destroy file system data.
2008-12-19Btrfs: set EXTENT_BOUNDARY bit before marking extent delalloc.Yan Zheng
There is a race in relocate_inode_pages, it happens when find_delalloc_range finds the delalloc extent before the boundary bit is set. Thank you, Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-19Btrfs: properly update block accounting for metadataYan Zheng
This adds the missing block accounting code to finish_current_insert and makes block accounting for root item properly protected by the delalloc spin lock. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-16Btrfs: delete checksum items before marking blocks freeChris Mason
Btrfs maintains a cache of blocks available for allocation in ram. The code that frees extents was marking the extents free and then deleting the checksum items. This meant it was possible the extent would be reallocated before the checksum item was actually deleted, leading to races and other problems as the checksums were updated for the newly allocated extent. The fix is to delete the checksum before marking the extent free. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-15Btrfs: Don't use spin*lock_irq for the delalloc lockChris Mason
The delalloc lock doesn't need to have irqs disabled, nobody that changes the number of delalloc bytes in the FS is running with irqs off. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-12Btrfs: fix nodatasum handling in balancing codeYan Zheng
Checksums on data can be disabled by mount option, so it's possible some data extents don't have checksums or have invalid checksums. This causes trouble for data relocation. This patch contains following things to make data relocation work. 1) make nodatasum/nodatacow mount option only affects new files. Checksums and COW on data are only controlled by the inode flags. 2) check the existence of checksum in the nodatacow checker. If checksums exist, force COW the data extent. This ensure that checksum for a given block is either valid or does not exist. 3) update data relocation code to properly handle the case of checksum missing. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-12Btrfs: shared seed deviceYan Zheng
This patch makes seed device possible to be shared by multiple mounted file systems. The sharing is achieved by cloning seed device's btrfs_fs_devices structure. Thanks you, Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-11Btrfs: fix leaking block group on balanceYan Zheng
The block group structs are referenced in many different places, and it's not safe to free while balancing. So, those block group structs were simply leaked instead. This patch replaces the block group pointer in the inode with the starting byte offset of the block group and adds reference counting to the block group struct. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>