aboutsummaryrefslogtreecommitdiff
path: root/fs/btrfs/volumes.c
AgeCommit message (Collapse)Author
2009-02-12Btrfs: make a lockdep class for the extent buffer locksChris Mason
Btrfs is currently using spin_lock_nested with a nested value based on the tree depth of the block. But, this doesn't quite work because the max tree depth is bigger than what spin_lock_nested can deal with, and because locks are sometimes taken before the level field is filled in. The solution here is to use lockdep_set_class_and_name instead, and to set the class before unlocking the pages when the block is read from the disk and just after init of a freshly allocated tree block. btrfs_clear_path_blocking is also changed to take the locks in the proper order, and it also makes sure all the locks currently held are properly set to blocking before it tries to retake the spinlocks. Otherwise, lockdep gets upset about bad lock orderin. The lockdep magic cam from Peter Zijlstra <peterz@infradead.org> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12Btrfs: fs/btrfs/volumes.c: remove useless kzallocJulia Lawall
The call to kzalloc is followed by a kmalloc whose result is stored in the same variable. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04Btrfs: Catch missed bios in the async bio submission threadChris Mason
The async bio submission thread was missing some bios that were added after it had decided there was no work left to do. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-21Btrfs: simplify iteration codesQinghuang Feng
Merge list_for_each* and list_entry to list_for_each_entry* Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-21Btrfs: Remove extra KERN_INFO in the middle of a lineRoland Dreier
The "devid <xxx> transid <xxx>" printk in btrfs_scan_one_device() actually follows another printk that doesn't end in a newline (since the intention is for the two printks to make one line of output), so the KERN_INFO just ends up messing up the output: device label exp <6>devid 1 transid 9 /dev/sda5 Fix this by changing the extra KERN_INFO to KERN_CONT. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-21Btrfs: removed unused #include <version.h>'sHuang Weiyi
Removed unused #include <version.h>'s in btrfs Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-16Btrfs: Clear the device->running_pending flag before bailing on congestionChris Mason
Btrfs maintains a queue of async bio submissions so the checksumming threads don't have to wait on get_request_wait. In order to avoid extra wakeups, this code has a running_pending flag that is used to tell new submissions they don't need to wake the thread. When the threads notice congestion on a single device, they may decide to requeue the job and move on to other devices. This makes sure the running_pending flag is cleared before the job is requeued. It should help avoid IO stalls by making sure the task is woken up when new submissions come in. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-05Btrfs: Fix checkpatch.pl warningsChris Mason
There were many, most are fixed now. struct-funcs.c generates some warnings but these are bogus. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-12Btrfs: shared seed deviceYan Zheng
This patch makes seed device possible to be shared by multiple mounted file systems. The sharing is achieved by cloning seed device's btrfs_fs_devices structure. Thanks you, Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-08Btrfs: Add inode sequence number for NFS and reserved space in a few structsChris Mason
This adds a sequence number to the btrfs inode that is increased on every update. NFS will be able to use that to detect when an inode has changed, without relying on inaccurate time fields. While we're here, this also: Puts reserved space into the super block and inode Adds a log root transid to the super so we can pick the newest super based on the fsync log as well as the main transaction ID. For now the log root transid is always zero, but that'll get fixed. Adds a starting offset to the dev_item. This will let us do better alignment calculations if we know the start of a partition on the disk. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-08Btrfs: Use map_private_extent_buffer during generic_bin_searchChris Mason
It is possible that generic_bin_search will be called on a tree block that has not been locked. This happens because cache_block_block skips locking on the tree blocks. Since the tree block isn't locked, we aren't allowed to change the extent_buffer->map_token field. Using map_private_extent_buffer avoids any changes to the internal extent buffer fields. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-08Btrfs: superblock duplicationYan Zheng
This patch implements superblock duplication. Superblocks are stored at offset 16K, 64M and 256G on every devices. Spaces used by superblocks are preserved by the allocator, which uses a reverse mapping function to find the logical addresses that correspond to superblocks. Thank you, Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-08Btrfs: move data checksumming into a dedicated treeChris Mason
Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-02Btrfs: corret fmode_t annotationsChristoph Hellwig
Make sure to propagate fmode_t properly and use the right constants for it. Signed-off-by: Christoph Hellwig <hch@lst.de>
2008-12-02Btrfs: make things static and include the right headersChristoph Hellwig
Shut up various sparse warnings about symbols that should be either static or have their declarations in scope. Signed-off-by: Christoph Hellwig <hch@lst.de>
2008-11-20Btrfs: compat code fixesChris Mason
The btrfs git kernel trees is used to build a standalone tree for compiling against older kernels. This commit makes the standalone tree work with 2.6.27 Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-19Btrfs: Fixes for 2.6.28-rc API changesChris Mason
* open/close_bdev_excl -> open/close_bdev_exclusive * blkdev_issue_discard takes a GFP mask now * Fix blkdev_issue_discard usage now that it is enabled Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-12Btrfs: Add a missing return pointer checkyanhai zhu
Add a missing kzalloc() return pointer check in add_missing_dev(). Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-17Btrfs: Seed device supportYan Zheng
Seed device is a special btrfs with SEEDING super flag set and can only be mounted in read-only mode. Seed devices allow people to create new btrfs on top of it. The new FS contains the same contents as the seed device, but it can be mounted in read-write mode. This patch does the following: 1) split code in btrfs_alloc_chunk into two parts. The first part does makes the newly allocated chunk usable, but does not do any operation that modifies the chunk tree. The second part does the the chunk tree modifications. This division is for the bootstrap step of adding storage to the seed device. 2) Update device management code to handle seed device. The basic idea is: For an FS grown from seed devices, its seed devices are put into a list. Seed devices are opened on demand at mounting time. If any seed device is missing or has been changed, btrfs kernel module will refuse to mount the FS. 3) make btrfs_find_block_group not return NULL when all block groups are read-only. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-11-07Btrfs: Avoid unplug storms during commitChris Mason
While doing a commit, btrfs makes sure all the metadata blocks were properly written to disk, calling wait_on_page_writeback for each page. This writeback happens after allowing another transaction to start, so it competes for the disk with other processes in the FS. If the page writeback bit is still set, each wait_on_page_writeback might trigger an unplug, even though the page might be waiting for checksumming to finish or might be waiting for the async work queue to submit the bio. This trades wait_on_page_writeback for waiting on the extent writeback bits. It won't trigger any unplugs and substantially improves performance in a number of workloads. This also changes the async bio submission to avoid requeueing if there is only one device. The requeue just wastes CPU time because there are no other devices to service. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29Btrfs: nuke fs wide allocation mutex V2Josef Bacik
This patch removes the giant fs_info->alloc_mutex and replaces it with a bunch of little locks. There is now a pinned_mutex, which is used when messing with the pinned_extents extent io tree, and the extent_ins_mutex which is used with the pending_del and extent_ins extent io trees. The locking for the extent tree stuff was inspired by a patch that Yan Zheng wrote to fix a race condition, I cleaned it up some and changed the locking around a little bit, but the idea remains the same. Basically instead of holding the extent_ins_mutex throughout the processing of an extent on the extent_ins or pending_del trees, we just hold it while we're searching and when we clear the bits on those trees, and lock the extent for the duration of the operations on the extent. Also to keep from getting hung up waiting to lock an extent, I've added a try_lock_extent so if we cannot lock the extent, move on to the next one in the tree and we'll come back to that one. I have tested this heavily and it does not appear to break anything. This has to be applied on top of my find_free_extent redo patch. I tested this patch on top of Yan's space reblancing code and it worked fine. The only thing that has changed since the last version is I pulled out all my debugging stuff, apparently I forgot to run guilt refresh before I sent the last patch out. Thank you, Signed-off-by: Josef Bacik <jbacik@redhat.com>
2008-10-29Btrfs: Add zlib compression supportChris Mason
This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-03Btrfs: cast bio->bi_sector to a u64 before shiftingChris Mason
On 32 bit machines without CONFIG_LBD, the bi_sector field is only 32 bits. Btrfs needs to cast it before shifting up, or we end up doing IO into the wrong place. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-29Btrfs: Wait for IO on the block device inodes of newly added devicesChris Mason
btrfs-vol -a /dev/xxx will zero the first and last two MB of the device. The kernel code needs to wait for this IO to finish before it adds the device. btrfs metadata IO does not happen through the block device inode. A separate address space is used, allowing the zero filled buffer heads in the block device inode to be written to disk after FS metadata starts going down to the disk via the btrfs metadata inode. The end result is zero filled metadata blocks after adding new devices into the filesystem. The fix is a simple filemap_write_and_wait on the block device inode before actually inserting it into the pool of available devices. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-26Btrfs: update space balancing codeZheng Yan
This patch updates the space balancing code to utilize the new backref format. Before, btrfs-vol -b would break any COW links on data blocks or metadata. This was slow and caused the amount of space used to explode if a large number of snapshots were present. The new code can keeps the sharing of all data extents and most of the tree blocks. To maintain the sharing of data extents, the space balance code uses a seperate inode hold data extent pointers, then updates the references to point to the new location. To maintain the sharing of tree blocks, the space balance code uses reloc trees to relocate tree blocks in reference counted roots. There is one reloc tree for each subvol, and all reloc trees share same root key objectid. Reloc trees are snapshots of the latest committed roots of subvols (root->commit_root). To relocate a tree block referenced by a subvol, there are two steps. COW the block through subvol's reloc tree, then update block pointer in the subvol to point to the new block. Since all reloc trees share same root key objectid, doing special handing for tree blocks owned by them is easy. Once a tree block has been COWed in one reloc tree, we can use the resulting new block directly when the same block is required to COW again through other reloc trees. In this way, relocated tree blocks are shared between reloc trees, so they are also shared between subvols. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Remove Btrfs compat code for older kernelsChris Mason
Btrfs had compatibility code for kernels back to 2.6.18. These have been removed, and will be maintained in a separate backport git tree from now on. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: free space accounting redoJosef Bacik
1) replace the per fs_info extent_io_tree that tracked free space with two rb-trees per block group to track free space areas via offset and size. The reason to do this is because most allocations come with a hint byte where to start, so we can usually find a chunk of free space at that hint byte to satisfy the allocation and get good space packing. If we cannot find free space at or after the given offset we fall back on looking for a chunk of the given size as close to that given offset as possible. When we fall back on the size search we also try to find a slot as close to the size we want as possible, to avoid breaking small chunks off of huge areas if possible. 2) remove the extent_io_tree that tracked the block group cache from fs_info and replaced it with an rb-tree thats tracks block group cache via offset. also added a per space_info list that tracks the block group cache for the particular space so we can lookup related block groups easily. 3) cleaned up the allocation code to make it a little easier to read and a little less complicated. Basically there are 3 steps, first look from our provided hint. If we couldn't find from that given hint, start back at our original search start and look for space from there. If that fails try to allocate space if we can and start looking again. If not we're screwed and need to start over again. 4) small fixes. there were some issues in volumes.c where we wouldn't allocate the rest of the disk. fixed cow_file_range to actually pass the alloc_hint, which has helped a good bit in making the fs_mark test I run have semi-normal results as we run out of space. Generally with data allocations we don't track where we last allocated from, so everytime we did a data allocation we'd search through every block group that we have looking for free space. Now searching a block group with no free space isn't terribly time consuming, it was causing a slight degradation as we got more data block groups. The alloc_hint has fixed this slight degredation and made things semi-normal. There is still one nagging problem I'm working on where we will get ENOSPC when there is definitely plenty of space. This only happens with metadata allocations, and only when we are almost full. So you generally hit the 85% mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm still tracking it down, but until then this seems to be pretty stable and make a significant performance gain. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: properly set blocksize when adding new device.Zheng Yan
--- Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add debugging checks to track down corrupted metadataChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Throttle for async bio submits higher up the chainChris Mason
The current code waits for the count of async bio submits to get below a given threshold if it is too high right after adding the latest bio to the work queue. This isn't optimal because the caller may have sequential adjacent bios pending they are waiting to send down the pipe. This changeset requires the caller to wait on the async bio count, and changes the async checksumming submits to wait for async bios any time they self throttle. The end result is much higher sequential throughput. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Wait for async bio submissions to make some progress at queue timeChris Mason
Before, the btrfs bdi congestion function was used to test for too many async bios. This keeps that check to throttle pdflush, but also adds a check while queuing bios. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Count async bios separately from async checksum work itemsChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Fix the multi-bio code to save the original bio for completionChris Mason
The multi-bio code is responsible for duplicating blocks in raid1 and single spindle duplication. It has counters to make sure all of the locations for a given extent are properly written before io completion is returned to the higher layers. But, it didn't always complete the same bio it was given, sometimes a clone was completed instead. This lead to problems with the async work queues because they saved a pointer to the bio in a struct off bi_private. The fix is to remember the original bio and only complete that one. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Hold a reference on bios during submit_bio, add some extra bio checksChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: implement memory reclaim for leaf reference cacheYan
The memory reclaiming issue happens when snapshot exists. In that case, some cache entries may not be used during old snapshot dropping, so they will remain in the cache until umount. The patch adds a field to struct btrfs_leaf_ref to record create time. Besides, the patch makes all dead roots of a given snapshot linked together in order of create time. After a old snapshot was completely dropped, we check the dead root list and remove all cache entries created before the oldest dead root in the list. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add locking around volume management (device add/remove/balance)Chris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Replace the transaction work queue with kthreadsChris Mason
This creates one kthread for commits and one kthread for deleting old snapshots. All the work queues are removed. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Replace the big fs_mutex with a collection of other locksChris Mason
Extent alloctions are still protected by a large alloc_mutex. Objectid allocations are covered by a objectid mutex Other btree operations are protected by a lock on individual btree nodes Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add a thread pool just for submit_bioChris Mason
If a bio submission is after a lock holder waiting for the bio on the work queue, it is possible to deadlock. Move the bios into their own pool. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add async worker threads for pre and post IO checksummingChris Mason
Btrfs has been using workqueues to spread the checksumming load across other CPUs in the system. But, workqueues only schedule work on the same CPU that queued the work, giving them a limited benefit for systems with higher CPU counts. This code adds a generic facility to schedule work with pools of kthreads, and changes the bio submission code to queue bios up. The queueing is important to make sure large numbers of procs on the system don't turn streaming workloads into random workloads by sending IO down concurrently. The end result of all of this is much higher performance (and CPU usage) when doing checksumming on large machines. Two worker pools are created, one for writes and one for endio processing. The two could deadlock if we tried to service both from a single pool. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Allocator fix variety packChris Mason
* Force chunk allocation when find_free_extent has to do a full scan * Record the max key at the start of defrag so it doesn't run forever * Block groups might not be contiguous, make a forward search for the next block group in extent-tree.c * Get rid of extra checks for total fs size * Fix relocate_one_reference to avoid relocating the same file data block twice when referenced by an older transaction * Use the open device count when allocating chunks so that we don't try to allocate from devices that don't exist Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Use kzalloc on the fs_devices allocationChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Handle transid == 0 while opening devicesChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Fix btrfs_open_devices to deal with changes since the scan ioctlsChris Mason
Devices can change after the scan ioctls are done, and btrfs_open_devices needs to be able to verify them as they are opened and used by the FS. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add mount -o degraded to allow mounts to continue with missing devicesChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Handle write errors on raid1 and raid10Chris Mason
When duplicate copies exist, writes are allowed to fail to one of those copies. This changeset includes a few changes that allow the FS to continue even when some IOs fail. It also adds verification of the parent generation number for btree blocks. This generation is stored in the pointer to a block, and it ensures that missed writes to are detected. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Chunk relocation fine tuning, and add a few printks to show progressChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Only open block devices once during mount -o subvol=Chris Mason
btrfs_open_devices needed a check to see if the device was already open. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add support for online device removalChris Mason
This required a few structural changes to the code that manages bdev pointers: The VFS super block now gets an anon-bdev instead of a pointer to the lowest bdev. This allows us to avoid swapping the super block bdev pointer around at run time. The code to read in the super block no longer goes through the extent buffer interface. Things got ugly keeping the mapping constant. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Compile warning fixup in volume.cChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>