aboutsummaryrefslogtreecommitdiff
path: root/fs/btrfs
AgeCommit message (Collapse)Author
2009-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: Spelling fix in btrfs_lookup_first_block_group comments Btrfs: make show_options result match actual option names Btrfs: remove outdated comment in btrfs_ioctl_resize() Btrfs: remove some WARN_ONs in the IO failure path Btrfs: Don't loop forever on metadata IO failures Btrfs: init inode ordered_data_close flag properly
2009-05-14Btrfs: Spelling fix in btrfs_lookup_first_block_group commentsSankar P
Signed-off-by: Sankar P <sankar.curiosity@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14Btrfs: make show_options result match actual option namesSage Weil
The notreelog and flushoncommit mount options were being printed slightly differently. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14Btrfs: remove outdated comment in btrfs_ioctl_resize()Li Hong
In Li Zefan's commit dae7b665cf6d6e6e733f1c9c16cf55547dd37e33, a combination call of kmalloc() and copy_from_user() is replaced by memdup_user(). So btrfs_ioctl_resize() doesn't use GFP_NOFS any more. Signed-off-by: Li Hong <lihong.hi@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14Btrfs: remove some WARN_ONs in the IO failure pathChris Mason
These debugging WARN_ONs make too much console noise during regular IO failures. An IO failure will still generate a number of messages as we verify checksums etc, but these two are not needed. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14Btrfs: Don't loop forever on metadata IO failuresChris Mason
When a btrfs metadata read fails, the first thing we try to do is find a good copy on another mirror of the block. If this fails, read_tree_block() ends up returning a buffer that isn't up to date. The btrfs btree reading code was reworked to drop locks and repeat the search when IO was done, but the changes didn't add a check for failed reads. The end result was looping forever on buffers that were never going to become up to date. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-14Btrfs: init inode ordered_data_close flag properlyChris Mason
This flag is used to decide when we need to send a given file through the ordered code to make sure it is fully written before a transaction commits. It was not being properly set to zero when the inode was being setup. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-05-09Convert obvious places to deactivate_locked_super()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: look for acls during btrfs_read_locked_inode Btrfs: fix acl caching Btrfs: Fix a bunch of printk() warnings. Btrfs: Fix a trivial warning using max() of u64 vs ULL. Btrfs: remove unused btrfs_bit_radix slab Btrfs: ratelimit IO error printks Btrfs: remove #if 0 code Btrfs: When shrinking, only update disk size on success Btrfs: fix deadlocks and stalls on dead root removal Btrfs: fix fallocate deadlock on inode extent lock Btrfs: kill btrfs_cache_create Btrfs: don't export symbols Btrfs: simplify makefile Btrfs: try to keep a healthy ratio of metadata vs data block groups
2009-04-27Btrfs: look for acls during btrfs_read_locked_inodeChris Mason
This changes btrfs_read_locked_inode() to peek ahead in the btree for acl items. If it is certain a given inode has no acls, it will set the in memory acl fields to null to avoid acl lookups completely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27Btrfs: fix acl cachingChris Mason
Linus noticed the btrfs code to cache acls wasn't properly caching a NULL acl when the inode didn't have any acls. This meant the common case of no acls resulted in expensive btree searches every time the kernel checked permissions (which is quite often). This is a modified version of Linus' original patch: Properly set initial acl fields to BTRFS_ACL_NOT_CACHED in the inode. This forces an acl lookup when permission checks are done. Fix btrfs_get_acl to avoid lookups and locking when the inode acls fields are set to null. Fix btrfs_get_acl to use the right return value from __btrfs_getxattr when deciding to cache a NULL acl. It was storing a NULL acl when __btrfs_getxattr return -ENOENT, but __btrfs_getxattr was actually returning -ENODATA for this case. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27Btrfs: Fix a bunch of printk() warnings.Joel Becker
Just happened to notice a bunch of %llu vs u64 warnings. Here's a patch to cast them all. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27Btrfs: Fix a trivial warning using max() of u64 vs ULL.Joel Becker
A small warning popped up on ia64 because inode-map.c was comparing a u64 object id with the ULL FIRST_FREE_OBJECTID. My first thought was that all the OBJECTID constants should contain the u64 cast because btrfs code deals entirely in u64s. But then I saw how large that was, and figured I'd just fix the max() call. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27Btrfs: remove unused btrfs_bit_radix slabChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27Btrfs: ratelimit IO error printksChris Mason
Btrfs has printks for various IO errors, including bad checksums and mismatches between what we expect the block headers to contain and what we actually find on the disk. Longer term we need a real reporting mechanism for this, but for now printk is going to have to do. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27Btrfs: remove #if 0 codeChris Mason
Btrfs had some old code sitting around under #if 0, this drops it. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27Btrfs: When shrinking, only update disk size on successChris Ball
Previously, we updated a device's size prior to attempting a shrink operation. This patch moves the device resizing logic to only happen if the shrink completes successfully. In the process, it introduces a new field to btrfs_device -- disk_total_bytes -- to track the on-disk size. Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24Btrfs: fix deadlocks and stalls on dead root removalChris Mason
After a transaction commit, the old root of the subvol btrees are sent through snapshot removal. This is what actually frees up any blocks replaced by COW, and anything the old blocks pointed to. Snapshot deletion will pause when a transaction commit has started, which helps to avoid a huge amount of delayed reference count updates piling up as the transaction is trying to close. But, this pause happens after the snapshot deletion process has asked other procs on the system to throttle back a bit so that it can make progress. We don't want to throttle everyone while we're waiting for the transaction commit, it leads to deadlocks in the user transaction ioctls used by Ceph and makes things slower in general. This patch changes things to avoid the throttling while we sleep. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24Btrfs: fix fallocate deadlock on inode extent lockChris Mason
The btrfs fallocate call takes an extent lock on the entire range being fallocated, and then runs through insert_reserved_extent on each extent as they are allocated. The problem with this is that btrfs_drop_extents may decide to try and take the same extent lock fallocate was already holding. The solution used here is to push down knowledge of the range that is already locked going into btrfs_drop_extents. It turns out that at least one other caller had the same bug. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24Btrfs: kill btrfs_cache_createChristoph Hellwig
Just use kmem_cache_create directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24Btrfs: don't export symbolsChristoph Hellwig
Currently the extent_map code is only for btrfs so don't export it's symbols. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24Btrfs: simplify makefileChristoph Hellwig
Get rid of the hacks for building out of tree, and always use += for assigning to the object lists. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24Btrfs: try to keep a healthy ratio of metadata vs data block groupsJosef Bacik
This patch makes the chunk allocator keep a good ratio of metadata vs data block groups. By default for every 8 data block groups, we'll allocate 1 metadata chunk, or about 12% of the disk will be allocated for metadata. This can be changed by specifying the metadata_ratio mount option. This is simply the number of data block groups that have to be allocated to force a metadata chunk allocation. By making sure we allocate metadata chunks more often, we are less likely to get into situations where the whole disk has been allocated as data block groups. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix btrfs fallocate oops and deadlock Btrfs: use the right node in reada_for_balance Btrfs: fix oops on page->mapping->host during writepage Btrfs: add a priority queue to the async thread helpers Btrfs: use WRITE_SYNC for synchronous writes
2009-04-21Btrfs: fix btrfs fallocate oops and deadlockChris Mason
Btrfs fallocate was incorrectly starting a transaction with a lock held on the extent_io tree for the file, which could deadlock. Strictly speaking it was using join_transaction which would be safe, but it is better to move the transaction outside of the lock. When preallocated extents are overwritten, btrfs_mark_buffer_dirty was being called on an unlocked buffer. This was triggering an assertion and oops because the lock is supposed to be held. The bug was calling btrfs_mark_buffer_dirty on a leaf after btrfs_del_item had been run. btrfs_del_item takes care of dirtying things, so the solution is a to skip the btrfs_mark_buffer_dirty call in this case. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20btrfs: use memdup_user()Li Zefan
Remove open-coded memdup_user(). Note this changes some GFP_NOFS to GFP_KERNEL, since copy_from_user() may cause pagefault, it's pointless to pass GFP_NOFS to kmalloc(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-20Btrfs: use the right node in reada_for_balanceChris Mason
reada_for_balance was using the wrong index into the path node array, so it wasn't reading the right blocks. We never directly used the results of the read done by this function because the btree search is started over at the end. This fixes reada_for_balance to reada in the correct node and to avoid searching past the last slot in the node. It also makes sure to hold the parent lock while we are finding the nodes to read. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20Btrfs: fix oops on page->mapping->host during writepageChris Mason
The extent_io writepage call updates the writepage index in the inode as it makes progress. But, it was doing the update after unlocking the page, which isn't legal because page->mapping can't be trusted once the page is unlocked. This lead to an oops, especially common with compression turned on. The fix here is to update the writeback index before unlocking the page. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20Btrfs: add a priority queue to the async thread helpersChris Mason
Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a higher priority. But, the checksumming helper threads prevent it from being fully effective. There are two problems. First, a big queue of pending checksumming will delay the synchronous IO behind other lower priority writes. Second, the checksumming uses an ordered async work queue. The ordering makes sure that IOs are sent to the block layer in the same order they are sent to the checksumming threads. Usually this gives us less seeky IO. But, when we start mixing IO priorities, the lower priority IO can delay the higher priority IO. This patch solves both problems by adding a high priority list to the async helper threads, and a new btrfs_set_work_high_prio(), which is used to make put a new async work item onto the higher priority list. The ordering is still done on high priority IO, but all of the high priority bios are ordered separately from the low priority bios. This ordering is purely an IO optimization, it is not involved in data or metadata integrity. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20Btrfs: use WRITE_SYNC for synchronous writesChris Mason
Part of reducing fsync/O_SYNC/O_DIRECT latencies is using WRITE_SYNC for writes we plan on waiting on in the near future. This patch mirrors recent changes in other filesystems and the generic code to use WRITE_SYNC when WB_SYNC_ALL is passed and to use WRITE_SYNC for other latency critical writes. Btrfs uses async worker threads for checksumming before the write is done, and then again to actually submit the bios. The bio submission code just runs a per-device list of bios that need to be sent down the pipe. This list is split into low priority and high priority lists so the WRITE_SYNC IO happens first. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: BUG to BUG_ON changes Btrfs: remove dead code Btrfs: remove dead code Btrfs: fix typos in comments Btrfs: remove unused ftrace include Btrfs: fix __ucmpdi2 compile bug on 32 bit builds Btrfs: free inode struct when btrfs_new_inode fails Btrfs: fix race in worker_loop Btrfs: add flushoncommit mount option Btrfs: notreelog mount option Btrfs: introduce btrfs_show_options Btrfs: rework allocation clustering Btrfs: Optimize locking in btrfs_next_leaf() Btrfs: break up btrfs_search_slot into smaller pieces Btrfs: kill the pinned_mutex Btrfs: kill the block group alloc mutex Btrfs: clean up find_free_extent Btrfs: free space cache cleanups Btrfs: unplug in the async bio submission threads Btrfs: keep processing bios for a given bdev if our proc is batching
2009-04-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Remove two unneeded exports and make two symbols static in fs/mpage.c Cleanup after commit 585d3bc06f4ca57f975a5a1f698f65a45ea66225 Trim includes of fdtable.h Don't crap into descriptor table in binfmt_som Trim includes in binfmt_elf Don't mess with descriptor table in load_elf_binary() Get rid of indirect include of fs_struct.h New helper - current_umask() check_unsafe_exec() doesn't care about signal handlers sharing New locking/refcounting for fs_struct Take fs_struct handling to new file (fs/fs_struct.c) Get rid of bumping fs_struct refcount in pivot_root(2) Kill unsharing fs_struct in __set_personality()
2009-04-02Btrfs: BUG to BUG_ON changesStoyan Gaydarov
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: remove dead codeDan Carpenter
Remove an unneeded return statement and conditional Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: remove dead codeDan Carpenter
merge is always NULL at this point. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: fix typos in commentsWu Fengguang
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: remove unused ftrace includeJim Owens
Signed-off-by: jim owens <jowens@hp.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03Btrfs: fix __ucmpdi2 compile bug on 32 bit buildsHeiko Carstens
We get this on 32 builds: fs/built-in.o: In function `extent_fiemap': (.text+0x1019f2): undefined reference to `__ucmpdi2' Happens because of a switch statement with a 64 bit argument. Convert this to an if statement to fix this. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: free inode struct when btrfs_new_inode failsShen Feng
btrfs_new_inode doesn't call iput to free the inode when it fails. Signed-off-by: Shen Feng <shen@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: fix race in worker_loopAmit Gud
Need to check kthread_should_stop after schedule_timeout() before calling schedule(). This causes threads to sleep with potentially no one to wake them up causing mount(2) to hang in btrfs_stop_workers waiting for threads to stop. Signed-off-by: Amit Gud <gud@ksu.edu> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: add flushoncommit mount optionSage Weil
The 'flushoncommit' mount option forces any data dirtied by a write in a prior transaction to commit as part of the current commit. This makes the committed state a fully consistent view of the file system from the application's perspective (i.e., it includes all completed file system operations). This was previously the behavior only when a snapshot is created. This is used by Ceph to ensure that completed writes make it to the platter along with the metadata operations they are bound to (by BTRFS_IOC_TRANS_{START,END}). Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: notreelog mount optionSage Weil
Add a 'notreelog' mount option to disable the tree log (used by fsync, O_SYNC writes). This is much slower, but the tree logging produces inconsistent views into the FS for ceph. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: introduce btrfs_show_optionsEric Paris
btrfs options can change at times other than mount, yet /proc/mounts shows the options string used when the fs was mounted (an example would be when btrfs determines that barriers aren't useful and turns them off.) This patch instead outputs the actual options in use by btrfs. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03Btrfs: rework allocation clusteringChris Mason
Because btrfs is copy-on-write, we end up picking new locations for blocks very often. This makes it fairly difficult to maintain perfect read patterns over time, but we can at least do some optimizations for writes. This is done today by remembering the last place we allocated and trying to find a free space hole big enough to hold more than just one allocation. The end result is that we tend to write sequentially to the drive. This happens all the time for metadata and it happens for data when mounted -o ssd. But, the way we record it is fairly racey and it tends to fragment the free space over time because we are trying to allocate fairly large areas at once. This commit gets rid of the races by adding a free space cluster object with dedicated locking to make sure that only one process at a time is out replacing the cluster. The free space fragmentation is somewhat solved by allowing a cluster to be comprised of smaller free space extents. This part definitely adds some CPU time to the cluster allocations, but it allows the allocator to consume the small holes left behind by cow. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03Btrfs: Optimize locking in btrfs_next_leaf()Chris Mason
btrfs_next_leaf was using blocking locks when it could have been using faster spinning ones instead. This adds a few extra checks around the pieces that block and switches over to spinning locks. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03Btrfs: break up btrfs_search_slot into smaller piecesChris Mason
btrfs_search_slot was doing too many things at once. This breaks it up into more reasonable units. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03Btrfs: kill the pinned_mutexJosef Bacik
This patch removes the pinned_mutex. The extent io map has an internal tree lock that protects the tree itself, and since we only copy the extent io map when we are committing the transaction we don't need it there. We also don't need it when caching the block group since searching through the tree is also protected by the internal map spin lock. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-04-03Btrfs: kill the block group alloc mutexJosef Bacik
This patch removes the block group alloc mutex used to protect the free space tree for allocations and replaces it with a spin lock which is used only to protect the free space rb tree. This means we only take the lock when we are directly manipulating the tree, which makes us a touch faster with multi-threaded workloads. This patch also gets rid of btrfs_find_free_space and replaces it with btrfs_find_space_for_alloc, which takes the number of bytes you want to allocate, and empty_size, which is used to indicate how much free space should be at the end of the allocation. It will return an offset for the allocator to use. If we don't end up using it we _must_ call btrfs_add_free_space to put it back. This is the tradeoff to kill the alloc_mutex, since we need to make sure nobody else comes along and takes our space. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-04-03Btrfs: clean up find_free_extentJosef Bacik
I've replaced the strange looping constructs with a list_for_each_entry on space_info->block_groups. If we have a hint we just jump into the loop with the block group and start looking for space. If we don't find anything we start at the beginning and start looking. We never come out of the loop with a ref on the block_group _unless_ we found space to use, then we drop it after we set the trans block_group. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-04-03Btrfs: free space cache cleanupsJosef Bacik
This patch cleans up the free space cache code a bit. It better documents the idiosyncrasies of tree_search_offset and makes the code make a bit more sense. I took out the info allocation at the start of __btrfs_add_free_space and put it where it makes more sense. This was left over cruft from when alloc_mutex existed. Also all of the re-searches we do to make sure we inserted properly. Signed-off-by: Josef Bacik <jbacik@redhat.com>