aboutsummaryrefslogtreecommitdiff
path: root/fs/cifs/CHANGES
AgeCommit message (Collapse)Author
2007-12-31[CIFS] Allow setting mode via cifs aclSteve French
Requires cifsacl mount flag to be on and CIFS_EXPERIMENTAL enabled CC: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-12-31[CIFS] redo existing session setup if needed in cifs_mountJeff Layton
When cifs_mount finds an existing SMB session that it can use for a new mount, it does not check to see whether that session is in need of being reconnected. An easy way to reproduce: 1) mount //server/share1 2) watch /proc/fs/cifs/DebugData for the share to go DISCONNECTED 3) mount //server/share2 with same creds as in step 1. The second mount will fail because CIFSTCon returned -EAGAIN. If you do an operation in share1 and then reattempt the mount it will work (since the session is reestablished). The following patch fixes this by having cifs_mount check the status of the session when it picks an existing session and calling cifs_setup_session on it again if it's in need of reconnection. Thanks to Wojciech Pilorz for the initial bug report. Signed-off-by: Jeff Layton <jlayton@tupile.poochiereds.net> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-12-30[CIFS] fix SetEA failure to some Samba versionsSteve French
Thanks to Oleg Gvozdev for noticing the problem. CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-20[CIFS] Fix potential data corruption when writing out cached dirty pagesJeff Layton
Fix RedHat bug 329431 The idea here is separate "conscious" from "unconscious" flushes. Conscious flushes are those due to a fsync() or close(). Unconscious ones are flushes that occur as a side effect of some other operation or due to memory pressure. Currently, when an error occurs during an unconscious flush (ENOSPC or EIO), we toss out the page and don't preserve that error to report to the user when a conscious flush occurs. If after the unconscious flush, there are no more dirty pages for the inode, the conscious flush will simply return success even though there were previous errors when writing out pages. This can lead to data corruption. The easiest way to reproduce this is to mount up a CIFS share that's very close to being full or where the user is very close to quota. mv a file to the share that's slightly larger than the quota allows. The writes will all succeed (since they go to pagecache). The mv will do a setattr to set the new file's attributes. This calls filemap_write_and_wait, which will return an error since all of the pages can't be written out. Then later, when the flush and release ops occur, there are no more dirty pages in pagecache for the file and those operations return 0. mv then assumes that the file was written out correctly and deletes the original. CIFS already has a write_behind_rc variable where it stores the results from earlier flushes, but that value is only reported in cifs_close. Since the VFS ignores the return value from the release operation, this isn't helpful. We should be reporting this error during the flush operation. This patch does the following: 1) changes cifs_fsync to use filemap_write_and_wait and cifs_flush and also sync to check its return code. If it returns successful, they then check the value of write_behind_rc to see if an earlier flush had reported any errors. If so, they return that error and clear write_behind_rc. 2) sets write_behind_rc in a few other places where pages are written out as a side effect of other operations and the code waits on them. 3) changes cifs_setattr to only call filemap_write_and_wait for ATTR_SIZE changes. 4) makes cifs_writepages accurately distinguish between EIO and ENOSPC errors when writing out pages. Some simple testing indicates that the patch works as expected and that it fixes the reproduceable known problem. Acked-by: Dave Kleikamp <shaggy@austin.rr.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-16[CIFS] Have CIFS_SessSetup build correct SPNEGO SessionSetup requestSteve French
Have CIFS_SessSetup call cifs_get_spnego_key when Kerberos is negotiated. Use the info in the key payload to build a session setup request packet. Also clean up how the request buffer in the function is freed on error. With appropriate user space helper (in samba/source/client). Kerberos support (secure session establishment can be done now via Kerberos, previously users would have to use NTLMv2 instead for more secure session setup). Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-09[CIFS] fix oops on second mount to same server when null auth is usedJeff Layton
When a share is mounted using no username, cifs_mount sets volume_info.username as a NULL pointer, and the sesInfo userName as an empty string. The volume_info.username is passed to a couple of other functions to see if there is an existing unc or tcp connection that can be used. These functions assume that the username will be a valid string that can be passed to strncmp. If the pointer is NULL, then the kernel will oops if there's an existing session to which the string can be compared. This patch changes cifs_mount to set volume_info.username to an empty string in this situation, which prevents the oops and should make it so that the comparison to other null auth sessions match. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-08[CIFS] add mode to acl conversion helper functionSteve French
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-01[CIFS] when mount helper missing fix slash wrong direction in shareSteve French
Kernel bugzilla bug #9228 If mount helper (mount.cifs) missing, mounts with form like //10.11.12.13/c$ would not work (only mounts with slash e.g. //10.11.12.13\\c$ would work) due to problem with slash supposed to be converted to backslash by the mount helper (which is not there). If we fail on converting an IPv4 address in in4_pton then try to canonicalize the first slash (ie between sharename and host ip address) if necessary. If we have to retry to check for IPv6 address the slash is already converted if necessary. Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-30[CIFS] enable get mode from ACL when cifsacl mount option specifiedShirish Pargaonkar
Part 9 of ACL patch series. getting mode from ACL now works in some cases (and requires CIFS_EXPERIMENTAL config option). Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-18[CIFS] Return better error when server requires signing but client forbidsSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-17[CIFS] fix bad handling of EAGAIN error on kernel_recvmsg in ↵Steve French
cifs_demultiplex_thread When kernel_recvmsg returns -EAGAIN or -ERESTARTSYS, then cifs_demultiplex_thread sleeps for a bit and then tries the read again. When it does this, it's not zeroing out the length and that throws off the value of total_read. Fix it to zero out the length. Can cause memory corruption: If kernel_recvmsg returns an error and total_read is a large enough value, then we'll end up going through the loop again. total_read will be a bogus value, as will (pdu_length-total_read). When this happens we end up calling kernel_recvmsg with a bogus value (possibly larger than the current iov_len). At that point, memcpy_toiovec can overrun iov. It will start walking up the stack, casting other things that are there to struct iovecs (since it assumes that it's been passed an array of them). Any pointer on the stack at an address above the kvec is a candidate for corruption here. Many thanks to Ulrich Obergfell for pointing this out. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-14[CIFS] Fix endian conversion problem in posix mkdirCyril Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-12[CIFS] CIFS ACL support part 3Steve French
Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-29[CIFS] named pipe support (part 2)Steve French
Also fixes typo which could cause build break Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-28[CIFS] Fix memory leak in statfs to very old serversSteve French
We were allocating request buffers twice in the statfs path when mounted to very old (Windows 9x) servers. Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-08-24[CIFS] Byte range unlock request to non-Unix server can unlock too muchJeff Layton
On a mount without posix extensions enabled, when an unlock request is made, the client can release more than is intended. To reproduce, on a CIFS mount without posix extensions enabled: 1) open file 2) do fcntl lock: start=0 len=1 3) do fcntl lock: start=2 len=1 4) do fcntl unlock: start=0 len=1 ...on the unlock call the client sends an unlock request to the server for both locks. The problem is a bad test in cifs_lock. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-26[CIFS] Fix hang in find_writable_fileSteve French
Caused by unneeded reopen during reconnect while spinlock held. Fixes kernel bugzilla bug #7903 Thanks to Lin Feng Shen for testing this, and Amit Arora for some nice problem determination to narrow this down. Acked-by: Dave Kleikamp <shaggy@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-15[CIFS] Add support for new POSIX unlinkSteve French
In the cleanup phase of the dbench test, we were noticing sharing violation followed by failed directory removals when dbench did not close the test files before the cleanup phase started. Using the new POSIX unlink, which Samba has supported for a few months, avoids this. Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-11[CIFS] Fix oops in cifs_create when nfsd server exports cifs mountSteve French
nfsd is passing null nameidata (probably the only one doing that) on call to create - cifs was missing one check for this. Note that running nfsd over a cifs mount requires specifying fsid on the nfs exports entry and requires mounting cifs with serverino mount option. Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-09[CIFS] Fix packet signatures for NTLMv2 caseSteve French
Signed-off-by: Yehuda Sadeh Weinraub <Yehuda.Sadeh@expand.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-06[CIFS] Mount should fail if server signing off but client mount option ↵Jeff
requires it Currently, if mount with a signing-enabled sec= option (e.g. sec=ntlmi), the kernel does a warning printk if the server doesn't support signing, and then proceeds without signatures. This is probably OK for people that think to look at the ring buffer, but seems wrong to me. If someone explicitly requests signing, we should error out if that request can't be satisfied. They can then reattempt the mount without signing if that's ok. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-06-24[CIFS] Add in some missing flags and cifs README and TODO correctionsSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-05-05[CIFS] Make sec=none force an anonymous mountJeff Layton
We had a customer report that attempting to make CIFS mount with a null username (i.e. doing an anonymous mount) doesn't work. Looking through the code, it looks like CIFS expects a NULL username from userspace in order to trigger an anonymous mount. The mount.cifs code doesn't seem to ever pass a null username to the kernel, however. It looks also like the kernel can take a sec=none option, but it only seems to look at it if the username is already NULL. This seems redundant and effectively makes sec=none useless. The following patch makes sec=none force an anonymous mount. Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-04-30[CIFS] UID/GID override on CIFS mounts to SambaSteve French
When CIFS Unix Extensions are negotiated we get the Unix uid and gid owners of the file from the server (on the Unix Query Path Info levels), but if the server's uids don't match the client uid's users were having to disable the Unix Extensions (which turned off features they still wanted). The changeset patch allows users to override uid and/or gid for file/directory owner with a default uid and/or gid specified at mount (as is often done when mounting from Linux cifs client to Windows server). This changeset also displays the uid and gid used by default in /proc/mounts (if applicable). Also cleans up code by adding some of the missing spaces after "if" keywords per-kernel style guidelines (as suggested by Randy Dunlap when he reviewed the patch). Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-04-25[CIFS] Add IPv6 supportSteve French
IPv6 support was started a few years ago in the cifs client, but lacked a kernel helper function for parsing the ascii form of the ipv6 address. Now that that is added (and now IPv6 is the default that some OS use now) it was fairly easy to finish the cifs ipv6 support. This requires that CIFS_EXPERIMENTAL be enabled and (at least until the mount.cifs module is modified to use a new ipv6 friendly call instead of gethostbyname) and the ipv6 address be passed on the mount as "ip=" mount option. Thanks Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-04-23[CIFS] New CIFS POSIX mkdir performance improvementSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-04-06[CIFS] Add write perm for usr to file on windows should remove r/o dos attrSteve French
Remove read only dos attribute on chmod when adding any write permission (ie on any of user/group/other (not all of user/group/other ie 0222) when mounted to windows. Suggested by: Urs Fleisch Signed-off-by: Urs Fleisch <urs.fleisch@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-03-23[CIFS] Allow reset of file to ATTR_NORMAL when archive bit not setSteve French
When a file had a dos attribute of 0x1 (readonly - but dos attribute of archive was not set) - doing chmod 0777 or equivalent would try to set a dos attribute of 0 (which some servers ignore) rather than ATTR_NORMAL (0x20) which most servers accept. Does not affect servers which support the CIFS Unix Extensions. Acked-by: Prasad Potluri <pvp@us.ibm.com> Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-03-10[CIFS] reset mode when client notices that ATTR_READONLY is no longer setAlan Tyson
Signed-off-by: Alan Tyso <atyson@hp.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-03-06[CIFS] cifs_prepare_write was incorrectly rereading page in some casesSteve French
Noticed by Shaggy. Signed-off-by: Shaggy <shaggy@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-02-26[CIFS] Fix locking problem around some cifs uses of i_size writeSteve French
Could cause hangs on smp systems in i_size_read on a cifs inode whose size has been previously simultaneously updated from different processes. Thanks to Brian Wang for some great testing/debugging on this hard problem. Fixes kernel bugzilla #7903 CC: Shirish Pargoankar <shirishp@us.ibm.com> CC: Shaggy <shaggy@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-02-14[CIFS] on reconnect to Samba - reset the unix capabilitiesSteve French
After temporary server or network failure and reconneciton, we were not resending the unix capabilities via SetFSInfo - which confused Samba posix byte range locking code. Discovered by jra Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-02-08[CIFS] POSIX CIFS Extensions (continued) - POSIX OpenSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-02-06[CIFS] Minor cleanupSteve French
Missing tab. Missing entry in changelog Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-12-23[CIFS] Update CIFS version numberSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-12-08[CIFS] Fix NTLMv2 mounts to Windows serversSteve French
Windows servers are pickier about NTLMv2 than Samba. This enables more secure mounts to Windows (not just Samba) ie when "sec=ntlmv2" is specified on the mount. Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-11-02[CIFS] report rename failure when target file is locked by WindowsSteve French
Fixes Samba bugzilla bug # 4182 Rename by handle failures (retry after rename by path) were not being returned back. Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-10-30[CIFS] Allow null user connectionsSteve French
Some servers are configured to only allow null user mounts for guest access. Allow nul user (anonymous) mounts e.g. mount -t cifs //server/share /mnt -o username= Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-09-21[CIFS] Support deep tree mounts (e.g. mounts to //server/share/path)Steve French
Samba bugzilla #4040 Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-08-16[CIFS] Do not send Query All EAs SMB when mount option nouser_xattrSteve French
specified Pointed out by Bjoern Jacke Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-08-15[CIFS] Fix oops in cifs_close due to unitialized lock sem and list inSteve French
new POSIX locking code Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-08-11[CIFS] Do not time out posix brl requests when using new posix setfileinfoSteve French
request and do not time out slow requests to a server that is still responding well to other threads Suggested by jra of Samba team Signed-off-by: Steve French <sfrench@us.ibm.com> (cherry picked from 89b57148115479eef074b8d3f86c4c86c96ac969 commit)
2006-06-27[CIFS] Fix allocation of buffers for new session setup routine to allowSteve French
longer user and domain names and allow passing sec options on mount Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-06-08[CIFS] NTLMv2 support part 5Steve French
NTLMv2 authentication (stronger authentication than default NTLM) which many servers support now works. There was a problem with the construction of the security blob in the older code. Currently requires /proc/fs/cifs/Experimental to be set to 2 and /proc/fs/cifs/SecurityFlags to be set to 0x4004 (to require using NTLMv2 instead of default of NTLM) Next we will check signing to make sure optional NTLMv2 packet signing also works. Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-06-07[CIFS] Add support for readdir to legacy serversSteve French
Fixes oops to OS/2 on ls and removes redundant NTCreateX calls to servers which do not support NT SMBs. Key operations to OS/2 work. Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-05-31[CIFS] Support for setting up SMB sessions to legacy lanman serversSteve French
2006-05-31[CIFS] Cleanup extra whitespace in dmesg logging. Update cifs change logSteve French
2006-05-30[CIFS] Do not limit the length of share names (was 100 for whole UNC name)Steve French
during mount. Especially important for some non-Western languages. Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-05-30[CIFS] Fix new POSIX Locking for setting lock_type correctly on unlockSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2006-04-22[CIFS] Readdir fixes to allow search to start at arbitrary positionSteve French
in directory Also includes first part of fix to compensate for servers which forget to return . and .. as well as updates to changelog and cifs readme. Signed-off-by: Steve French <sfrench@us.ibm.com>