aboutsummaryrefslogtreecommitdiff
path: root/fs/cifs/dir.c
AgeCommit message (Collapse)Author
2009-12-10vfs: Implement proper O_SYNC semanticsChristoph Hellwig
While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-11-25[CIFS] Fix sparse warningSteve French
Also update CHANGES file Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-11-24[CIFS] Duplicate data on appending to some Samba serversSteve French
SMB writes are sent with a starting offset and length. When the server supports the newer SMB trans2 posix open (rather than using the SMB NTCreateX) a file can be opened with SMB_O_APPEND flag, and for that case Samba server assumes that the offset sent in SMBWriteX is unneeded since the write should go to the end of the file - which can cause problems if the write was cached (since the beginning part of a page could be written twice by the client mm). Jeff suggested that masking the flag on posix open on the client is easiest for the time being. Note that recent Samba server also had an unrelated problem with SMB NTCreateX and append (see samba bugzilla bug number 6898) which should not affect current Linux clients (unless cifs Unix Extensions are disabled). The cifs client did not send the O_APPEND flag on posix open before 2.6.29 so the fix is unneeded on early kernels. In the future, for the non-cached case (O_DIRECT, and forcedirectio mounts) it would be possible and useful to send O_APPEND on posix open (for Windows case: FILE_APPEND_DATA but not FILE_WRITE_DATA on SMB NTCreateX) but for cached writes although the vfs sets the offset to end of file it may fragment a write across pages - so we can't send O_APPEND on open (could result in sending part of a page twice). CC: Stable <stable@kernel.org> Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-11-24[CIFS] fix oops in cifs_lookup during net bootSteve French
Fixes bugzilla.kernel.org bug number 14641 Lookup called during network boot (network root filesystem for diskless workstation) has case where nd is null in lookup. This patch fixes that in cifs_lookup. (Shirish noted that 2.6.30 and 2.6.31 stable need the same check) Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com> Acked-by: Jeff Layton <jlayton@redhat.com> Tested-by: Vladimir Stavrinov <vs@inist.ru> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-24cifs: eliminate cifs_init_privateJeff Layton
...it does the same thing as cifs_fill_fileinfo, but doesn't handle the flist ordering correctly. Also rename cifs_fill_fileinfo to a more descriptive name and have it take an open flags arg instead of just a write_only flag. That makes the logic in the callers a little simpler. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-24cifs: convert oplock breaks to use slow_work facility (try #4)Jeff Layton
This is the fourth respin of the patch to convert oplock breaks to use the slow_work facility. A customer of ours was testing a backport of one of the earlier patchsets, and hit a "Busy inodes after umount..." problem. An oplock break job had raced with a umount, and the superblock got torn down and its memory reused. When the oplock break job tried to dereference the inode->i_sb, the kernel oopsed. This patchset has the oplock break job hold an inode and vfsmount reference until the oplock break completes. With this, there should be no need to take a tcon reference (the vfsmount implicitly holds one already). Currently, when an oplock break comes in there's a chance that the oplock break job won't occur if the allocation of the oplock_q_entry fails. There are also some rather nasty races in the allocation and handling these structs. Rather than allocating oplock queue entries when an oplock break comes in, add a few extra fields to the cifsFileInfo struct. Get rid of the dedicated cifs_oplock_thread as well and queue the oplock break job to the slow_work thread pool. This approach also has the advantage that the oplock break jobs can potentially run in parallel rather than be serialized like they are today. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-15cifs: have cifsFileInfo hold an extra inode referenceJeff Layton
It's possible that this struct will outlive the filp to which it is attached. If it does and it needs to do some work on the inode, then it'll need a reference. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-15cifs: fix oplock request handling in posix codepathJeff Layton
cifs_posix_open takes a "poplock" argument that's intended to be used in the actual posix open call to set the "Flags" field. It ignores this value however and declares an "oplock" parameter on the stack that it passes uninitialized to the CIFSPOSIXOpen function. Not only does this mean that the oplock request flags are bogus, but the result that's expected to be in that variable is unchanged. Fix this, and also clean up the type of the oplock parameter used. Since it's expected to be __u32, we should use that everywhere and not implicitly cast it from a signed type. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-09-01cifs: Replace wrtPending with a real reference countDave Kleikamp
Currently, cifs_close() tries to wait until all I/O is complete and then frees the file private data. If I/O does not completely in a reasonable amount of time it frees the structure anyway, leaving a potential use- after-free situation. This patch changes the wrtPending counter to a complete reference count and lets the last user free the structure. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Tested-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-09cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfoJeff Layton
cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo ...in preparation of adding a SET_FILE_INFO variant. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-08cifs: fix regression with O_EXCL creates and optimize away lookupJeff Layton
cifs: fix regression with O_EXCL creates and optimize away lookup Signed-off-by: Jeff Layton <jlayton@redhat.com> Tested-by: Shirish Pargaonkar <shirishp@gmail.com> CC: Stable Kernel <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-07-01cifs: add new cifs_iget function and convert unix codepath to use itJeff Layton
cifs: add new cifs_iget function and convert unix codepath to use it In order to unify some codepaths, introduce a common cifs_fattr struct for storing inode attributes. The different codepaths (unix, legacy, normal, etc...) can fill out this struct with inode info. It can then be passed as an arg to a common set of routines to get and update inodes. Add a new cifs_iget function that uses iget5_locked to identify inodes. This will compare inodes based on the uniqueid value in a cifs_fattr struct. Rather than filling out an already-created inode, have cifs_get_inode_info_unix instead fill out cifs_fattr and hand that off to cifs_iget. cifs_iget can then properly look for hardlinked inodes. On the readdir side, add a new cifs_readdir_lookup function that spawns populated dentries. Redefine FILE_UNIX_INFO so that it's basically a FILE_UNIX_BASIC_INFO that has a few fields wrapped around it. This allows us to more easily use the same function for filling out the fattr as the non-readdir codepath. With this, we should then have proper hardlink detection and can eventually get rid of some nasty CIFS-specific hacks for handing them. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-06-25cifs: Fix incorrect return code being printed in cFYI messagesSuresh Jayaraman
FreeXid() along with freeing Xid does add a cifsFYI debug message that prints rc (return code) as well. In some code paths where we set/return error code after calling FreeXid(), incorrect error code is being printed when cifsFYI is enabled. This could be misleading in few cases. For eg. In cifs_open() if cifs_fill_filedata() returns a valid pointer to cifsFileInfo, FreeXid() prints rc=-13 whereas 0 is actually being returned. Fix this by setting rc before calling FreeXid(). Basically convert FreeXid(xid); rc = -ERR; return -ERR; => FreeXid(xid); return rc; [Note that Christoph would like to replace the GetXid/FreeXid calls, which are primarily used for debugging. This seems like a good longer term goal, but although there is an alternative tracing facility, there are no examples yet available that I know of that we can use (yet) to convert this cifs function entry/exit logging, and for creating an identifier that we can use to correlate all dmesg log entries for a particular vfs operation (ie identify all log entries for a particular vfs request to cifs: e.g. a particular close or read or write or byte range lock call ... and just using the thread id is harder). Eventually when a replacement for this is available (e.g. when NFS switches over and various samples to look at in other file systems) we can remove the GetXid/FreeXid macro but in the meantime multiple people use this run time configurable logging all the time for debugging, and Suresh's patch fixes a problem which made it harder to notice some low memory problems in the log so it is worthwhile to fix this problem until a better logging approach is able to be used] Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-23[CIFS] Avoid open on possible directories since Samba now rejects themSteve French
Small change (mostly formatting) to limit lookup based open calls to file create only. After discussion yesteday on samba-technical about the posix lookup regression, and looking at a problem with cifs posix open to one particular Samba version, Jeff and JRA realized that Samba server's behavior changed in this area (posix open behavior on files vs. directories). To make this behavior consistent, JRA just made a fix to Samba server to alter how it handles open of directories (now returning the equivalent of EISDIR instead of success). Since we don't know at lookup time whether the inode is a directory or file (and thus whether posix open will succeed with most current Samba server), this change avoids the posix open code on lookup open (just issues posix open on creates). This gets the semantic benefits we want (atomicity, posix byte range locks, improved write semantics on newly created files) and file create still is fast, and we avoid the problem that Jeff noticed yesterday with "openat" (and some open directory calls) of non-cached directories to one version of Samba server, and will work with future Samba versions (which include the fix jra just pushed into Samba server). I confirmed this approach with jra yesterday and with Shirish today. Posix open is only called (at lookup time) for file create now. For opens (rather than creates), because we do not know if it is a file or directory yet, and current Samba no longer allows us to do posix open on dirs, we could end up wasting an open call on what turns out to be a dir. For file opens, we wait to call posix open till cifs_open. It could be added here (lookup) in the future but the performance tradeoff of the extra network request when EISDIR or EACCES is returned would have to be weighed against the 50% reduction in network traffic in the other paths. Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Tested-by: Jeff Layton <jlayton@redhat.com> CC: Jeremy Allison <jra@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-21[CIFS] fix posix open regressionSteve French
Posix open code was not properly adding the file to the list of open files. Fix allocating cifsFileInfo more than once, and adding twice to flist and tlist. Also fix mode setting to be done in one place in these paths. Signed-off-by: Steve French <sfrench@us.ibm.com> Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Tested-by: Jeff Layton <jlayton@redhat.com> Tested-by: Luca Tettamanti <kronos.it@gmail.com>
2009-05-08[CIFS] Fix double list addition in cifs posix open codeSteve French
Remove adding open file entry twice to lists in the file Do not fill file info twice in case of posix opens and creates Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17[CIFS] Fix build break caused by change to new current_umask helper functionSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17[CIFS] Fix sparse warningsSteve French
Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com> CC: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17[CIFS] Add support for posix open during lookupSteve French
This patch by utilizing lookup intents, and thus removing a network roundtrip in the open path, improves performance dramatically on open (30% or more) to Samba and other servers which support the cifs posix extensions Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-17[CIFS] Endian convert UniqueId when reporting inode numbers from server filesSteve French
Jeff made a good point that we should endian convert the UniqueId when we use it to set i_ino Even though this value is opaque to the client, when comparing the inode numbers of the same server file from two different clients (one big endian, one little endian) or when we compare a big endian client's view of i_ino with what the server thinks - we should get the same value Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-03-31New helper - current_umask()Al Viro
current->fs->umask is what most of fs_struct users are doing. Put that into a helper function. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (37 commits) fs: avoid I_NEW inodes Merge code for single and multiple-instance mounts Remove get_init_pts_sb() Move common mknod_ptmx() calls into caller Parse mount options just once and copy them to super block Unroll essentials of do_remount_sb() into devpts vfs: simple_set_mnt() should return void fs: move bdev code out of buffer.c constify dentry_operations: rest constify dentry_operations: configfs constify dentry_operations: sysfs constify dentry_operations: JFS constify dentry_operations: OCFS2 constify dentry_operations: GFS2 constify dentry_operations: FAT constify dentry_operations: FUSE constify dentry_operations: procfs constify dentry_operations: ecryptfs constify dentry_operations: CIFS constify dentry_operations: AFS ...
2009-03-27constify dentry_operations: CIFSAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-12[CIFS] reopen file via newer posix open protocol operation if availableSteve French
If the network connection crashes, and we have to reopen files, preferentially use the newer cifs posix open protocol operation if the server supports it. Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-02-21[CIFS] improve posix semantics of file createSteve French
Samba server added support for a new posix open/create/mkdir operation a year or so ago, and we added support to cifs for mkdir to use it, but had not added the corresponding code to file create. The following patch helps improve the performance of the cifs create path (to Samba and servers which support the cifs posix protocol extensions). Using Connectathon basic test1, with 2000 files, the performance improved about 15%, and also helped reduce network traffic (17% fewer SMBs sent over the wire) due to saving a network round trip for the SetPathInfo on every file create. It should also help the semantics (and probably the performance) of write (e.g. when posix byte range locks are on the file) on file handles opened with posix create, and adds support for a few flags which would have to be ignored otherwise. Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29[CIFS] some cleanup to dir.c prior to addition of posix_openSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (31 commits) [CIFS] Remove redundant test [CIFS] make sure that DFS pathnames are properly formed Remove an already-checked error condition in SendReceiveBlockingLock Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition [CIFS] Streamline SendReceive[2] by using "goto out:" in an error condition Slightly streamline SendReceive[2] Check the return value of cifs_sign_smb[2] [CIFS] Cleanup: Move the check for too large R/W requests [CIFS] Slightly simplify wait_for_free_request(), remove an unnecessary "else" branch Simplify allocate_mid() slightly: Remove some unnecessary "else" branches [CIFS] In SendReceive, move consistency check out of the mutexed region cifs: store password in tcon cifs: have calc_lanman_hash take more granular args cifs: zero out session password before freeing it cifs: fix wait_for_response to time out sleeping processes correctly [CIFS] Can not mount with prefixpath if root directory of share is inaccessible [CIFS] various minor cleanups pointed out by checkpatch script [CIFS] fix typo [CIFS] remove sparse warning ... Fix trivial conflict in fs/cifs/cifs_fs_sb.h due to comment changes for the CIFS_MOUNT_xyz bit definitions between cifs updates and security updates.
2008-12-26[CIFS] various minor cleanups pointed out by checkpatch scriptSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-14CRED: Wrap task credential accesses in the CIFS filesystemDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Steve French <sfrench@samba.org> Cc: linux-cifs-client@lists.samba.org Signed-off-by: James Morris <jmorris@namei.org>
2008-08-06[CIFS] cifs_mkdir and cifs_create should respect the setgid bit on parent dirJeff Layton
If a server supports unix extensions but does not support POSIX create routines, then the client will create a new inode with a standard SMB mkdir or create/open call and then will set the mode. When it does this, it does not take the setgid bit on the parent directory into account. This patch has CIFS flip on the setgid bit when the parent directory has it. If the share is mounted with "setuids" then also change the group owner to the gid of the parent. This patch should apply cleanly on top of the setattr cleanup patches that I sent a few weeks ago. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-06bundle up Unix SET_PATH_INFO args into a struct and change nameJeff Layton
We'd like to be able to use the unix SET_PATH_INFO_BASIC args to set file times as well, but that makes the argument list rather long. Bundle up the args for unix SET_PATH_INFO call into a struct. For now, we don't actually use the times fields anywhere. That will be done in a follow-on patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-23when creating new inodes, use file_mode/dir_mode exclusively on mount ↵Jeff Layton
without unix extensions When CIFS creates a new inode on a mount without unix extensions, it temporarily assigns the mode that was passed to it in the create/mkdir call. Eventually, when the inode is revalidated, it changes to have the file_mode or dir_mode for the mount. This is confusing to users who expect that the mode shouldn't change this way. It's also problematic since only the mode is treated this way, not the uid or gid. Suppose you have a CIFS mount that's mounted with: uid=0,gid=0,file_mode=0666,dir_mode=0777 ...if an unprivileged user comes along and does this on the mount: mkdir -m 0700 foo touch foo/bar ...there is a period of time where the touch will fail, since the dir will initially be owned by root and have mode 0700. If the user waits long enough, then "foo" will be revalidated and will get the correct dir_mode permissions. This patch changes cifs_mkdir and cifs_create to not overwrite the mode found by the initial cifs_get_inode_info call after the inode is created on the server. Legacy behavior can be reenabled with the new "dynperm" mount option. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-15[CIFS] suppress duplicate warningSteve French
fs/cifs/dir.c: In function 'cifs_ci_compare': fs/cifs/dir.c:582: warning: passing argument 1 of 'memcpy' discards qualifiers from pointer target type Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-15[CIFS] Fix paths when share is in DFS to include proper prefixSteve French
Some versions of Samba (3.2-pre e.g.) are stricter about checking to make sure that paths in DFS name spaces are sent in the form \\server\share\dir\subdir ... instead of \dir\subdir Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-05-11[CIFS] when not using unix extensions, check for and set ATTR_READONLY on ↵Jeff Layton
create and mkdir When creating a directory on a CIFS share without POSIX extensions, and the given mode has no write bits set, set the ATTR_READONLY bit. When creating a file, set ATTR_READONLY if the create mode has no write bits set and we're not using unix extensions. There are some comments about this being problematic due to the VFS splitting creates into 2 parts. I'm not sure what that's actually talking about, but I'm assuming that it has something to do with how mknod is implemented. In the simple case where we have no unix extensions and we're just creating a regular file, there's no reason we can't set ATTR_READONLY. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-04-29[CIFS] convert usage of implicit booleans to boolSteve French
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-03-14[CIFS] file create with acl support enabled is slowSteve French
Shirish Pargaonkar noted: With cifsacl mount option, when a file is created on the Windows server, exclusive oplock is broken right away because the get cifs acl code again opens the file to obtain security descriptor. The client does not have the newly created file handle or inode in any of its lists yet so it does not respond to oplock break and server waits for its duration and then responds to the second open. This slows down file creation signficantly. The fix is to pass the file descriptor to the get cifsacl code wherever available so that get cifs acl code does not send second open (NT Create ANDX) and oplock is not broken. CC: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-07[CIFS] reduce checkpatch warningsSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-01-20[CIFS] Do not log path names in lookup errorsSteve French
Andi Kleen noticed that we were logging access denied errors (which is noisy in the dmesg log, and not needed to be logged) and that we were logging path names on that an other errors (e.g. EIO) which we should not be doing. CC: Andi Kleen <ak@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-10-23[CIFS] acl support part 6Steve French
CC: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-29[CIFS] named pipe support (part 2)Steve French
Also fixes typo which could cause build break Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-09-28[CIFS] CIFS support for named pipes (part 1)Steve French
This allows cifs to mount to ipc shares (IPC$) which will allow user space applications to layer over authenticated cifs connections (useful for Wine and others that would want to put DCE/RPC over CIFS or run CIFS named pipes) Acked-by: Rob Shearman <rob@codeweavers.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-08-31[CIFS] Fix warnings shown by newer version of sparseSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-18[CIFS] Allow disabling CIFS Unix Extensions as mount optionSteve French
Previously the only way to do this was to umount all mounts to that server, turn off a proc setting (/proc/fs/cifs/LinuxExtensionsEnabled). Fixes Samba bugzilla bug number: 4582 (and also 2008) Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-11[CIFS] Fix oops in cifs_create when nfsd server exports cifs mountSteve French
nfsd is passing null nameidata (probably the only one doing that) on call to create - cifs was missing one check for this. Note that running nfsd over a cifs mount requires specifying fsid on the nfs exports entry and requires mounting cifs with serverino mount option. Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-07-10[CIFS] whitespace cleanupSteve French
More than halfway there Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-06-08[CIFS] CIFS should honour umaskSteve French
This patch makes CIFS honour a process' umask like other filesystems. Of course the server is still free to munge the permissions if it wants to; but the client will send the "right" permissions to begin with. A few caveats: 1) It only applies to filesystems that have CAP_UNIX (aka support unix extensions) 2) It applies the correct mode to the follow up CIFSSMBUnixSetPerms() after remote creation When mode to CIFS/NTFS ACL mapping is complete we can do the same thing for that case for servers which do not support the Unix Extensions. Signed-off-by: Matt Keenen <matt@opcode-solutions.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-06-05[CIFS] whitespace cleanup part 2Steve French
Various coding style problems found by running the new checkpatch.pl script against fs/cifs. 3 more files fixed up. Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-06-05[CIFS] whitespace cleanupSteve French
Various coding style problems found by running fs/cifs against the new checkpatch.pl script. Since there were too many to fit in one patch. Updated the first four files. Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-05-03[CIFS] Change semaphore to mutex for cifs lock_semRoland Dreier
Originally at http://lkml.org/lkml/2006/9/2/86 The recent change to "allow Windows blocking locks to be cancelled via a CANCEL_LOCK call" introduced a new semaphore in struct cifsFileInfo, lock_sem. However, semaphores used as mutexes are deprecated these days, and there's no reason to add a new one to the kernel. Therefore, convert lock_sem to a struct mutex (and also fix one indentation glitch on one of the lines changed anyway). Signed-off-by: Roland Dreier <roland@digitalvampire.org> Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Steve French <sfrench@us.ibm.com>