aboutsummaryrefslogtreecommitdiff
path: root/fs/exofs
AgeCommit message (Collapse)Author
2010-04-29exofs: Fix "add bdi backing to mount session" fall outBoaz Harrosh
Commit b3d0ab7e60d1865bb6f6a79a77aaba22f2543236 ("exofs: add bdi backing to mount session") has a bug in the placement of the bdi member at struct exofs_sb_info. The layout member must be kept last. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-22exofs: add bdi backing to mount sessionJens Axboe
This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-05pass writeback_control to ->write_inodeChristoph Hellwig
This gives the filesystem more information about the writeback that is happening. Trond requested this for the NFS unstable write handling, and other filesystems might benefit from this too by beeing able to distinguish between the different callers in more detail. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-28exofs: groups supportBoaz Harrosh
* _calc_stripe_info() changes to accommodate for grouping calculations. Returns additional information * old _prepare_pages() becomes _prepare_one_group() which stores pages belonging to one device group. * New _prepare_for_striping iterates on all groups calling _prepare_one_group(). * Enable mounting of groups data_maps (group_width != 0) [QUESTION] what is faster A or B; A. x += stride; x = x % width + first_x; B x += stride if (x < last_x) x = first_x; Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: Prepare for groupsBoaz Harrosh
* Rename _offset_dev_unit_off() to _calc_stripe_info() and recieve a struct for the output params * In _prepare_for_striping we only need to call _calc_stripe_info() once. The other componets are easy to calculate from that. This code was inspired by what's done in truncate. * Some code shifts that make sense now but will make more sense when group support is added. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: Error recovery if object is missing from storageBoaz Harrosh
If an object is referenced by a directory but does not exist on a target, it is a very serious corruption that means: 1. Either a power failure with very slim chance of it happening. Because the directory update is always submitted much after object creation, but if a directory is written to one device and the object creation to another it might theoretically happen. 2. It only ever happened to me while developing with BUGs causing file corruption. Crashes could also cause it but they are more like case 1. In any way the object does not exist, so data is surely lost. If there is a mix-up in the obj-id or data-map, then lost objects can be salvaged by off-line fsck. The only recoverable information is the directory name. By letting it appear as a regular empty file, with date==0 (1970 Jan 1st) ownership to root, we enable recovery of the only useful information. And also enable deletion or over-write. I can see how this can hurt. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: convert io_state to use pages array instead of bio at inputBoaz Harrosh
* inode.c operations are full-pages based, and not actually true scatter-gather * Lets us use more pages at once upto 512 (from 249) in 64 bit * Brings us much much closer to be able to use exofs's io_state engine from objlayout driver. (Once I decide where to put the common code) After RAID0 patch the outer (input) bio was never used as a bio, but was simply a page carrier into the raid engine. Even in the simple mirror/single-dev arrangement pages info was copied into a second bio. It is now easer to just pass a pages array into the io_state and prepare bio(s) once. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: RAID0 supportBoaz Harrosh
We now support striping over mirror devices. Including variable sized stripe_unit. Some limits: * stripe_unit must be a multiple of PAGE_SIZE * stripe_unit * stripe_count is maximum upto 32-bit (4Gb) Tested RAID0 over mirrors, RAID0 only, mirrors only. All check. Design notes: * I'm not using a vectored raid-engine mechanism yet. Following the pnfs-objects-layout data-map structure, "Mirror" is just a private case of "group_width" == 1, and RAID0 is a private case of "Mirrors" == 1. The performance lose of the general case over the particular special case optimization is totally negligible, also considering the extra code size. * In general I added a prepare_stripes() stage that divides the to-be-io pages to the participating devices, the previous exofs_ios_write/read, now becomes _write/read_mirrors and a new write/read upper layer loops on all devices calling _write/read_mirrors. Effectively the prepare_stripes stage is the all secret. Also truncate need fixing to accommodate for striping. * In a RAID0 arrangement, in a regular usage scenario, if all inode layouts will start at the same device, the small files fill up the first device and the later devices stay empty, the farther the device the emptier it is. To fix that, each inode will start at a different stripe_unit, according to it's obj_id modulus number-of-stripe-units. And will then span all stripe-units in the same incrementing order wrapping back to the beginning of the device table. We call it a stripe-units moving window. Special consideration was taken to keep all devices in a mirror arrangement identical. So a broken osd-device could just be cloned from one of the mirrors and no FS scrubbing is needed. (We do that by rotating stripe-unit at a time and not a single device at a time.) TODO: We no longer verify object_length == inode->i_size in exofs_iget. (since i_size is stripped on multiple objects now). I should introduce a multiple-device attribute reading, and use it in exofs_iget. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: Define on-disk per-inode optional layout attributeBoaz Harrosh
* Layouts describe the way a file is spread on multiple devices. The layout information is stored in the objects attribute introduced in this patch. * There can be multiple generating function for the layout. Currently defined: - No attribute present - use below moving-window on global device table, all devices. (This is the only one currently used in exofs) - an obj_id generated moving window - the obj_id is a randomizing factor in the otherwise global map layout. - An explicit layout stored, including a data_map and a device index list. - More might be defined in future ... * There are two attributes defined of the same structure: A-data-files-layout - This layout is used by data-files. If present at a directory, all files of that directory will be created with this layout. A-meta-data-layout - This layout is used by a directory and other meta-data information. Also inherited at creation of subdirectories. * At creation time inodes are created with the layout specified above. A usermode utility may change the creation layout on a give directory or file. Which in the case of directories, will also apply to newly created files/subdirectories, children of that directory. In the simple unaltered case of a newly created exofs, no layout attributes are present, and all layouts adhere to the layout specified at the device-table. * In case of a future file system loaded in an old exofs-driver. At iget(), the generating_function is inspected and if not supported will return an IO error to the application and the inode will not be loaded. So not to damage any data. Note: After this patch we do not yet support any type of layout only the RAID0 patch that enables striping at the super-block level will add support for RAID0 layouts above. This way we are past and future compatible and fully bisectable. * Access to the device table is done by an accessor since it will change according to above information. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: unindent exofs_sbi_readBoaz Harrosh
The original idea was that a mirror read can be sub-divided to multiple devices. But this has very little gain and only at very large IOes so it's not going to be implemented soon. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: Move layout related members to a layout structureBoaz Harrosh
* Abstract away those members in exofs_sb_info that are related/needed by a layout into a new exofs_layout structure. Embed it in exofs_sb_info. * At exofs_io_state receive/keep a pointer to an exofs_layout. No need for an exofs_sb_info pointer, all we need is at exofs_layout. * Change any usage of above exofs_sb_info members to their new name. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: Recover in the case of read-passed-end-of-fileBoaz Harrosh
In check_io, implement the case of reading passed end of file, by clearing the pages and recover with no error. In a raid arrangement this can become a legitimate situation in case of holes in the file. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: Micro-optimize exofs_i_infoBoaz Harrosh
optimize the exofs_i_info struct usage by moving the embedded vfs_inode to be first. A compiler might optimize away an "add" operation with constant zero. (Which it cannot with other constants) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-02-28exofs: debug print even lessBoaz Harrosh
* Last debug trimming left in some stupid print, remove them. Fixup some other prints * Shift printing from inode.c to ios.c * Add couple of prints when memory allocation fails. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-01-05exofs: simple_write_end does not mark_inode_dirtyBoaz Harrosh
exofs uses simple_write_end() for it's .write_end handler. But it is not enough because simple_write_end() does not call mark_inode_dirty() when it extends i_size. So even if we do call mark_inode_dirty at beginning of write out, with a very long IO and a saturated system we might get the .write_inode() called while still extend-writing to file and miss out on the last i_size updates. So override .write_end, call simple_write_end(), and afterwords if i_size was changed call mark_inode_dirty(). It stands to logic that since simple_write_end() was the one extending i_size it should also call mark_inode_dirty(). But it looks like all users of simple_write_end() are memory-bound pseudo filesystems, who could careless about mark_inode_dirty(). I might submit a warning-comment patch to simple_write_end() in future. CC: Stable <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2010-01-05exofs: fix pnfs_osd re-definitions in pre-pnfs treesBoaz Harrosh
Some on disk exofs constants and types are defined in the pnfs_osd_xdr.h file. Since we needed these types before the pnfs-objects code was accepted to mainline we duplicated the minimal needed definitions into an exofs local header. The definitions where conditionally included depending on !CONFIG_PNFS defined. So if PNFS was present in the tree definitions are taken from there and if not they are defined locally. That was all good but, the CONFIG_PNFS is planed to be included upstream before the pnfs-objects is also included. (The first pnfs batch might be pnfs-files only) So condition exofs local definitions on the absence of pnfs_osd_xdr.h inclusion (__PNFS_OSD_XDR_H__ not defined). User code must make sure that in future pnfs_osd_xdr.h will be included before fs/exofs/pnfs.h, which happens to be so in current code. Once pnfs-objects hits mainline, exofs's local header will be removed. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-12-10exofs: Multi-device mirror supportBoaz Harrosh
This patch changes on-disk format, it is accompanied with a parallel patch to mkfs.exofs that enables multi-device capabilities. After this patch, old exofs will refuse to mount a new formatted FS and new exofs will refuse an old format. This is done by moving the magic field offset inside the FSCB. A new FSCB *version* field was added. In the future, exofs will refuse to mount unmatched FSCB version. To up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option before mounting. Introduced, a new object that contains a *device-table*. This object contains the default *data-map* and a linear array of devices information, which identifies the devices used in the filesystem. This object is only written to offline by mkfs.exofs. This is why it is kept separate from the FSCB, since the later is written to while mounted. Same partition number, same object number is used on all devices only the device varies. * define the new format, then load the device table on mount time make sure every thing is supported. * Change I/O engine to now support Mirror IO, .i.e write same data to multiple devices, read from a random device to spread the read-load from multiple clients (TODO: stripe read) Implementation notes: A few points introduced in previous patch should be mentioned here: * Special care was made so absolutlly all operation that have any chance of failing are done before any osd-request is executed. This is to minimize the need for a data consistency recovery, to only real IO errors. * Each IO state has a kref. It starts at 1, any osd-request executed will increment the kref, finally when all are executed the first ref is dropped. At IO-done, each request completion decrements the kref, the last one to return executes the internal _last_io() routine. _last_io() will call the registered io_state_done. On sync mode a caller does not supply a done method, indicating a synchronous request, the caller is put to sleep and a special io_state_done is registered that will awaken the caller. Though also in sync mode all operations are executed in parallel. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-12-10exofs: Move all operations to an io_engineBoaz Harrosh
In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-12-10exofs: move osd.c to ios.cBoaz Harrosh
If I do a "git mv" together with a massive code change and commit in one patch, git looses the rename and records a delete/new instead. This is bad because I want a rename recorded so later rebased/cherry-picked patches to the old name will work. Also the --follow is lost. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-12-10exofs: statfs blocks is sectors not FS blocksBoaz Harrosh
Even though exofs has a 4k block size, statfs blocks is in sectors (512 bytes). Also if target returns 0 for capacity then make it ULLONG_MAX. df does not like zero-size filesystems Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-12-10exofs: Prints on mount and unmoutBoaz Harrosh
It is important to print in the logs when a filesystem was mounted and eventually unmounted. Print the osd-device's osd_name and pid the FS was mounted/unmounted on. TODO: How to also print the namespace path the filesystem was mounted on? Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-12-10exofs: refactor exofs_i_info initialization into common helperBoaz Harrosh
There are two places that initialize inodes: exofs_iget() and exofs_new_inode() As more members of exofs_i_info that need initialization are added this code will grow. (soon) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-12-10exofs: dbg-print lessBoaz Harrosh
Iner-loops printing is converted to EXOFS_DBG2 which is #defined to nothing. It is now almost bareable to just leave debug-on. Every operation is printed once, with most relevant info (I hope). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-12-10exofs: More sane debug printBoaz Harrosh
debug prints should be somewhat useful without actually reading the source code Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-09-24exofs: remove BKL from super operationsBoaz Harrosh
the two places inside exofs that where taking the BKL were: exofs_put_super() - .put_super and exofs_sync_fs() - which is .sync_fs and is also called from .write_super. Now exofs_sync_fs() is protected from itself by also taking the sb_lock. exofs_put_super() directly calls exofs_sync_fs() so there is no danger between these two either. In anyway there is absolutely nothing dangerous been done inside exofs_sync_fs(). Unless there is some subtle race with the actual lifetime of the super_block in regard to .put_super and some other parts of the VFS. Which is highly unlikely. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21exofs: Avoid using file_fsync()Boaz Harrosh
The use of file_fsync() in exofs_file_sync() is not necessary since it does some extra stuff not used by exofs. Open code just the parts that are currently needed. TODO: Farther optimization can be done to sync the sb only on inode update of new files, Usually the sb update is not needed in exofs. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-06-21exofs: Remove IBM copyrightsBoaz Harrosh
Boaz, Congrats on getting all the OSD stuff into 2.6.30! I just pulled the git, and saw that the IBM copyrights are still there. Please remove them from all files: * Copyright (C) 2005, 2006 * International Business Machines IBM has revoked all rights on the code - they gave it to me. Thanks! Avishay Signed-off-by: Avishay Traeger <avishay@gmail.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-06-21exofs: Fix bio leak in error handling path (sync read)Boaz Harrosh
When failing a read request in the sync path, called from write_begin, I forgot to free the allocated bio, fix it. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-06-12[SCSI] Merge branch 'linus'James Bottomley
Conflicts: drivers/message/fusion/mptsas.c fixed up conflict between req->data_len accessors and mptsas driver updates. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-11exofs: add ->sync_fsChristoph Hellwig
Add a ->sync_fs method for data integrity syncs, and reimplement ->write_super ontop of it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11->write_super lock_super pushdownChristoph Hellwig
Push down lock_super into ->write_super instances and remove it from the caller. Following filesystem don't need ->s_lock in ->write_super and are skipped: * bfs, nilfs2 - no other uses of s_lock and have internal locks in ->write_super * ext2 - uses BKL in ext2_write_super and has internal calls without s_lock * reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in ->write_super * xfs - no other uses of s_lock and uses internal lock (buffer lock on superblock buffer) to serialize ->write_super. Also xfs_fs_write_super is superflous and will go away in the next merge window Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11push BKL down into ->put_superChristoph Hellwig
Move BKL into ->put_super from the only caller. A couple of filesystems had trivial enough ->put_super (only kfree and NULLing of s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs, hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most of them probably don't need it, but I'd rather sort that out individually. Preferably after all the other BKL pushdowns in that area. [AV: original used to move lock_super() down as well; these changes are removed since we don't do lock_super() at all in generic_shutdown_super() now] [AV: fuse, btrfs and xfs are known to need no damn BKL, exempt] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11remove ->write_super call in generic_shutdown_superChristoph Hellwig
We just did a full fs writeout using sync_filesystem before, and if that's not enough for the filesystem it can perform it's own writeout in ->put_super, which many filesystems already do. Move a call to foofs_write_super into every foofs_put_super for now to guarantee identical behaviour until it's cleaned up by the individual filesystem maintainers. Exceptions: - affs already has identical copy & pasted code at the beginning of affs_put_super so no need to do it twice. - xfs does the right thing without it and I have changes pending for the xfs tree touching this are so I don't really need conflicts here.. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-10[SCSI] libosd: Define an osd_dev wrapper to retrieve the request_queueBoaz Harrosh
libosd users that need to work with bios, must sometime use the request_queue associated with the osd_dev. Make a wrapper for that, and convert all in-tree users. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] libosd: osd_req_{read,write} takes a length parameterBoaz Harrosh
For supporting of chained-bios we can not inspect the first bio only, as before. Caller shall pass the total length of the request, ie. sum_bytes(bio-chain). Also since the bio might be a chain we don't set it's direction on behalf of it's callers. The bio direction should be properly set prior to this call. So fix a couple of write users that now need to set the bio direction properly [In this patch I change both library code and user sites at exofs, to make it easy on integration. It should be submitted via James's scsi-misc tree.] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> CC: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] libosd: osd_req_{read,write}_kern new APIBoaz Harrosh
By popular demand, define usefull wrappers for osd_req_read/write that recieve kernel pointers. All users had their own. Also remove these from exofs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-11block: add rq->resid_lenTejun Heo
rq->data_len served two purposes - the length of data buffer on issue and the residual count on completion. This duality creates some headaches. First of all, block layer and low level drivers can't really determine what rq->data_len contains while a request is executing. It could be the total request length or it coulde be anything else one of the lower layers is using to keep track of residual count. This complicates things because blk_rq_bytes() and thus [__]blk_end_request_all() relies on rq->data_len for PC commands. Drivers which want to report residual count should first cache the total request length, update rq->data_len and then complete the request with the cached data length. Secondly, it makes requests default to reporting full residual count, ie. reporting that no data transfer occurred. The residual count is an exception not the norm; however, the driver should clear rq->data_len to zero to signify the normal cases while leaving it alone means no data transfer occurred at all. This reverse default behavior complicates code unnecessarily and renders block PC on some drivers (ide-tape/floppy) unuseable. This patch adds rq->resid_len which is used only for residual count. While at it, remove now unnecessasry blk_rq_bytes() caching in ide_pc_intr() as rq->data_len is not changed anymore. Boaz : spotted missing conversion in osd Sergei : spotted too early conversion to blk_rq_bytes() in ide-tape [ Impact: cleanup residual count handling, report 0 resid by default ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mike Miller <mike.miller@hp.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Mike Miller <mike.miller@hp.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Darrick J. Wong <djwong@us.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-31exofs: DocumentationBoaz Harrosh
Added some documentation in exofs.txt, as well as a BUGS file. For further reading, operation instructions, example scripts and up to date infomation and code please see: http://open-osd.org Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31exofs: export_operationsBoaz Harrosh
implement export_operations and set in superblock. It is now posible to export exofs via nfs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31exofs: super_operations and file_system_typeBoaz Harrosh
This patch ties all operation vectors into a file system superblock and registers the exofs file_system_type at module's load time. * The file system control block (AKA on-disk superblock) resides in an object with a special ID (defined in common.h). Information included in the file system control block is used to fill the in-memory superblock structure at mount time. This object is created before the file system is used by mkexofs.c It contains information such as: - The file system's magic number - The next inode number to be allocated Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31exofs: dir_inode and directory operationsBoaz Harrosh
implementation of directory and inode operations. * A directory is treated as a file, and essentially contains a list of <file name, inode #> pairs for files that are found in that directory. The object IDs correspond to the files' inode numbers and are allocated using a 64bit incrementing global counter. * Each file's control block (AKA on-disk inode) is stored in its object's attributes. This applies to both regular files and other types (directories, device files, symlinks, etc.). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31exofs: address_space_operationsBoaz Harrosh
OK Now we start to read and write from osd-objects. We try to collect at most contiguous pages as possible in a single write/read. The first page index is the object's offset. TODO: In 64-bit a single bio can carry at most 128 pages. Add support of chaining multiple bios Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31exofs: symlink_inode and fast_symlink_inode operationsBoaz Harrosh
Generic implementation of symlink ops. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31exofs: file and file_inode operationsBoaz Harrosh
implementation of the file_operations and inode_operations for regular data files. Most file_operations are generic vfs implementations except: - exofs_truncate will truncate the OSD object as well - Generic file_fsync is not good for none_bd devices so open code it - The default for .flush in Linux is todo nothing so call exofs_fsync on the file. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2009-03-31exofs: Kbuild, Headers and osd utilsBoaz Harrosh
This patch includes osd infrastructure that will be used later by the file system. Also the declarations of constants, on disk structures, and prototypes. And the Kbuild+Kconfig files needed to build the exofs module. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>