aboutsummaryrefslogtreecommitdiff
path: root/fs/ext3
AgeCommit message (Collapse)Author
2007-10-17ext3: lighten up resize transaction requirementsEric Sandeen
When resizing online, setup_new_group_blocks attempts to reserve a potentially very large transaction, depending on the current filesystem geometry. For some journal sizes, there may not be enough room for this transaction, and the online resize will fail. The patch below resizes & restarts the transaction as necessary while setting up the new group, and should work with even the smallest journal. Tested with something like: [root@newbox ~]# dd if=/dev/zero of=fsfile bs=1024 count=32768 [root@newbox ~]# mkfs.ext3 -b 1024 fsfile 16384 [root@newbox ~]# mount -o loop fsfile mnt/ [root@newbox ~]# resize2fs /dev/loop0 resize2fs 1.40.2 (12-Jul-2007) Filesystem at /dev/loop0 is mounted on /root/mnt; on-line resizing required old desc_blocks = 1, new_desc_blocks = 1 Performing an on-line resize of /dev/loop0 to 32768 (1k) blocks. resize2fs: No space left on device While trying to add group #2 [root@newbox ~]# dmesg | tail -n 1 JBD: resize2fs wants too many credits (258 > 256) [root@newbox ~]# With the below change, it works. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Andreas Dilger <adilger@clusterfs.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17ext3: remove #ifdef CONFIG_EXT3_INDEXEric Sandeen
CONFIG_EXT3_INDEX is not an exposed config option in the kernel, and it is unconditionally defined in ext3_fs.h. tune2fs is already able to turn off dir indexing, so at this point it's just cluttering up the code. Remove it. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Fix f_version type: should be u64 instead of unsigned longMathieu Desnoyers
Fix f_version type: should be u64 instead of long There is a type inconsistency between struct inode i_version and struct file f_version. fs.h: struct inode u64 i_version; and struct file unsigned long f_version; Users do: fs/ext3/dir.c: if (filp->f_version != inode->i_version) { So why isn't f_version a u64 ? It becomes a problem if versions gets higher than 2^32 and we are on an architecture where longs are 32 bits. This patch changes the f_version type to u64, and updates the users accordingly. It applies to 2.6.23-rc2-mm2. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Martin Bligh <mbligh@google.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: <linux-ext4@vger.kernel.org> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17ext2/ext3/ext4: add block bitmap validationAneesh Kumar K.V
When a new block bitmap is read from disk in read_block_bitmap() there are a few bits that should ALWAYS be set. In particular, the blocks given by ext4_blk_bitmap, ext4_inode_bitmap and ext4_inode_table. Validate the block bitmap against these blocks. [akpm@linux-foundation.org: cleanups] Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Acked-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17remove unused bh in calls to ext234_get_group_descEric Sandeen
ext[234]_get_group_desc never tests the bh argument, and only sets it if it is passed in; it is perfectly happy with a NULL bh argument. But, many callers send one in and never use it. May as well call with NULL like other callers who don't use the bh. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17ext3: show all mount optionsMiklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fs: mark nibblemap constPhilippe De Muyter
Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter_init error handlingPeter Zijlstra
alloc_percpu can fail, propagate that error. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter_sum_positivePeter Zijlstra
s/percpu_counter_sum/&_positive/ Because its consitent with percpu_counter_read* Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter_subPeter Zijlstra
Hugh spotted that some code does: percpu_counter_add(&counter, -unsignedlong) which, when the amount argument is of type s32, sort-of works thanks to two's-complement. However when we'd change the type to s64 this breaks on 32bit machines, because the promotion rules zero extend the unsigned number. Provide percpu_counter_sub() to hide the s64 cast. That is: percpu_counter_sub(&counter, foo) is equal to: percpu_counter_add(&counter, -(s64)foo); Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17lib: percpu_counter_addPeter Zijlstra
s/percpu_counter_mod/percpu_counter_add/ Because its a better name, _mod implies modulo. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16ext3: convert to new aopsNick Piggin
Various fixes and improvements Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16readahead: combine file_ra_state.prev_index/prev_offset into prev_posFengguang Wu
Combine the file_ra_state members unsigned long prev_index unsigned int prev_offset into loff_t prev_pos It is more consistent and better supports huge files. Thanks to Peter for the nice proposal! [akpm@linux-foundation.org: fix shift overflow] Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19ext34: ensure do_split leaves enough free space in both blocksEric Sandeen
The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Tested-by: Junjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19dir_index: error out instead of BUG on corrupt dx dirsEric Sandeen
Convert asserts (BUGs) in dx_probe from bad on-disk data to recoverable errors with helpful warnings. With help catching other asserts from Duane Griffin <duaneg@dghda.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Duane Griffin <duaneg@dghda.com> Acked-by: Theodore Ts'o <tytso@mit.edu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11quota: fix infinite loopJan Kara
If we fail to start a transaction when releasing dquot, we have to call dquot_release() anyway to mark dquot structure as inactive. Otherwise we end in an infinite loop inside dqput(). Signed-off-by: Jan Kara <jack@suse.cz> Cc: xb <xavier.bru@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26fix inode_table test in ext234_check_descriptorsEric Sandeen
ext[234]_check_descriptors sanity checks block group descriptor geometry at mount time, testing whether the block bitmap, inode bitmap, and inode table reside wholly within the blockgroup. However, the inode table test is off by one so that if the last block in the inode table resides on the last block of the block group, the test incorrectly fails. This is because it tests the last block as (start + length) rather than (start + length - 1). This can be seen by trying to mount a filesystem made such as: mkfs.ext2 -F -b 1024 -m 0 -g 256 -N 3744 fsfile 1024 which yields: EXT2-fs error (device loop0): ext2_check_descriptors: Inode table for group 0 not in group (block 101)! EXT2-fs: group descriptors corrupted! There is a similar bug in e2fsprogs, patch already sent for that. (I wonder if inside(), outside(), and/or in_range() should someday be used in this and other tests throughout the ext filesystems...) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-19readahead: split ondemand readahead interface into two functionsRusty Russell
Split ondemand readahead interface into two functions. I think this makes it a little clearer for non-readahead experts (like Rusty). Internally they both call ondemand_readahead(), but the page argument is changed to an obvious boolean flag. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19readahead: convert ext3/ext4 invocationsFengguang Wu
Convert ext3/ext4 dir reads to use on-demand readahead. Readahead for dirs operates _not_ on file level, but on blockdev level. This makes a difference when the data blocks are not continuous. And the read routine is somehow opaque: there's no handy info about the status of current page. So a simplified call scheme is employed: to call into readahead whenever the current page falls out of readahead windows. Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Cc: Steven Pratt <slpratt@austin.ibm.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Introduce is_owner_or_cap() to wrap CAP_FOWNER use with fsuid checkSatyam Sharma
Introduce is_owner_or_cap() macro in fs.h, and convert over relevant users to it. This is done because we want to avoid bugs in the future where we check for only effective fsuid of the current task against a file's owning uid, without simultaneously checking for CAP_FOWNER as well, thus violating its semantics. [ XFS uses special macros and structures, and in general looked ... untouchable, so we leave it alone -- but it has been looked over. ] The (current->fsuid != inode->i_uid) check in generic_permission() and exec_permission_lite() is left alone, because those operations are covered by CAP_DAC_OVERRIDE and CAP_DAC_READ_SEARCH. Similarly operations falling under the purview of CAP_CHOWN and CAP_LEASE are also left alone. Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in> Cc: Al Viro <viro@ftp.linux.org.uk> Acked-by: Serge E. Hallyn <serge@hallyn.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17knfsd: exportfs: add exportfs.h headerChristoph Hellwig
currently the export_operation structure and helpers related to it are in fs.h. fs.h is already far too large and there are very few places needing the export bits, so split them off into a separate header. [akpm@linux-foundation.org: fix cifs build] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Neil Brown <neilb@suse.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16ext3: statfs speed upBadari Pulavarty
This is a patch that speeds up statfs. It is very simple - the "overhead" calculation, which takes a huge amount of time for large filesystems, never changes unless the size of the filesystem itself changes. That means we can store it in memory and only recalculate if the filesystem has been resized (almost never). It also fixes a minor problem that we never update the on-disk superblock free blocks/inodes counts until the filesystem is unmounted. While not fatal, we may as well update that on disk when we have the information, and it makes things like debugfs and dumpe2fs report a bit more accurate info. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16ext3: fix error handling in ext3_create_journal()Borislav Petkov
Fix error handling in ext3_create_journal according to kernel conventions. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16is_power_of_2: ext3/super.cvignesh babu
Replace (n & (n-1)) in the context of power of 2 checks with is_power_of_2() Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16ext3: remove extra IS_RDONLY() checkDave Hansen
ext3_change_inode_journal_flag() is only called from one location: ext3_ioctl(EXT3_IOC_SETFLAGS). That ioctl case already has a IS_RDONLY() call in it so this one is superfluous. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16ext3: fix deadlock in ext3_remount() and orphan list handlingJan Kara
ext3_orphan_add() and ext3_orphan_del() functions lock sb->s_lock with a transaction started with ext3_mark_recovery_complete() waits for a transaction holding sb->s_lock, thus leading to a possible deadlock. At the moment we call ext3_mark_recovery_complete() from ext3_remount() we have done all the work needed for remounting and thus we are safe to drop sb->s_lock before we wait for transactions to commit. Note that at this moment we are still guarded by s_umount lock against other remounts/umounts. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Eric Sandeen <sandeen@sandeen.net> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16ext3/ext4: orphan list corruption due bad inodeVasily Averin
After ext3 orphan list check has been added into ext3_destroy_inode() (please see my previous patch) the following situation has been detected: EXT3-fs warning (device sda6): ext3_unlink: Deleting nonexistent file (37901290), 0 Inode 00000101a15b7840: orphan list check failed! 00000773 6f665f00 74616d72 00000573 65725f00 06737270 66000000 616d726f ... Call Trace: [<ffffffff80211ea9>] ext3_destroy_inode+0x79/0x90 [<ffffffff801a2b16>] sys_unlink+0x126/0x1a0 [<ffffffff80111479>] error_exit+0x0/0x81 [<ffffffff80110aba>] system_call+0x7e/0x83 First messages said that unlinked inode has i_nlink=0, then ext3_unlink() adds this inode into orphan list. Second message means that this inode has not been removed from orphan list. Inode dump has showed that i_fop = &bad_file_ops and it can be set in make_bad_inode() only. Then I've found that ext3_read_inode() can call make_bad_inode() without any error/warning messages, for example in the following case: ... if (inode->i_nlink == 0) { if (inode->i_mode == 0 || !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ORPHAN_FS)) { /* this inode is deleted */ brelse (bh); goto bad_inode; ... Bad inode can live some time, ext3_unlink can add it to orphan list, but ext3_delete_inode() do not deleted this inode from orphan list. As result we can have orphan list corruption detected in ext3_destroy_inode(). However it is not clear for me how to fix this issue correctly. As far as i see is_bad_inode() is called after iget() in all places excluding ext3_lookup() and ext3_get_parent(). I believe it makes sense to add bad inode check to these functions too and call iput if bad inode detected. Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16ext3/ext4: orphan list check on destroy_inodeVasily Averin
Customers claims to ext3-related errors, investigation showed that ext3 orphan list has been corrupted and have the reference to non-ext3 inode. The following debug helps to understand the reasons of this issue. [akpm@linux-foundation.org: update for print_hex_dump() changes] Signed-off-by: Vasily Averin <vvs@sw.ru> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10sendfile: remove .sendfile from filesystems that use generic_file_sendfile()Jens Axboe
They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-06-24ext3: lost brelse in ext3_read_inode()Kirill Korotaev
One of error path in ext3_read_inode() leaks bh since brelse is forgoten. Signed-off-by: Kirill Korotaev <dev@openvz.org> Acked-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17Remove SLAB_CTOR_CONSTRUCTORChristoph Lameter
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09ext3: use zero_user_pageNate Diller
Use zero_user_page() instead of open-coding it. Signed-off-by: Nate Diller <nate.diller@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08ext3: copy i_flags to inode flags on writeJan Kara
A patch that stores inode flags such as S_IMMUTABLE, S_APPEND, etc. from i_flags to EXT3_I(inode)->i_flags when inode is written to disk. The same thing is done on GETFLAGS ioctl. Quota code changes these flags on quota files (to make it harder for sysadmin to screw himself) and these changes were not correctly propagated into the filesystem (especially, lsattr did not show them and users were wondering...). Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into ext3-specific i_flags. Hence, when someone sets these flags via a different interface than ioctl, they are stored correctly. Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08ext3: dirindex error pointer issuesDmitriy Monakhov
- ext3_dx_find_entry() exit with out setting proper error pointer - do_split() exit with out setting proper error pointer it is realy painful because many callers contain folowing code: de = do_split(handle,dir, &bh, frame, &hinfo, &retval); if (!(de)) return retval; <<< WOW retval wasn't changed by do_split(), so caller failed <<< but return SUCCESS :) - Rearrange do_split() error path. Current error path is realy ugly, all this up and down jump stuff doesn't make code easy to understand. [dmonakhov@sw.ru: fix annoying fake error messages] Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08ext2/3/4: fix file date underflow on ext2 3 filesystems on 64 bit systemsMarkus Rechberger
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=5079 signed long ranges from -2.147.483.648 to 2.147.483.647 on x86 32bit 10000011110110100100111110111101 .. -2,082,844,739 10000011110110100100111110111101 .. 2,212,122,557 <- this currently gets stored on the disk but when converting it to a 64bit signed long value it loses its sign and becomes positive. Cc: Andreas Dilger <adilger@dilger.ca> Cc: <linux-ext4@vger.kernel.org> Andreas says: This patch is now treating timestamps with the high bit set as negative times (before Jan 1, 1970). This means we lose 1/2 of the possible range of timestamps (lopping off 68 years before unix timestamp overflow - now only 30 years away :-) to handle the extremely rare case of setting timestamps into the distant past. If we are only interested in fixing the underflow case, we could just limit the values to 0 instead of storing negative values. At worst this will skew the timestamp by a few hours for timezones in the far east (files would still show Jan 1, 1970 in "ls -l" output). That said, it seems 32-bit systems (mine at least) allow files to be set into the past (01/01/1907 works fine) so it seems this patch is bringing the x86_64 behaviour into sync with other kernels. On the plus side, we have a patch that is ready to add nanosecond timestamps to ext3 and as an added bonus adds 2 high bits to the on-disk timestamp so this extends the maximum date to 2242. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07slab allocators: Remove SLAB_DEBUG_INITIAL flagChristoph Lameter
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by SLAB. I think its purpose was to have a callback after an object has been freed to verify that the state is the constructor state again? The callback is performed before each freeing of an object. I would think that it is much easier to check the object state manually before the free. That also places the check near the code object manipulation of the object. Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was compiled with SLAB debugging on. If there would be code in a constructor handling SLAB_DEBUG_INITIAL then it would have to be conditional on SLAB_DEBUG otherwise it would just be dead code. But there is no such code in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real use of, difficult to understand and there are easier ways to accomplish the same effect (i.e. add debug code before kfree). There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be clear in fs inode caches. Remove the pointless checks (they would even be pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors. This is the last slab flag that SLUB did not support. Remove the check for unimplemented flags from SLUB. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07mm: remove destroy_dirty_buffers from invalidate_bdev()Peter Zijlstra
Remove the destroy_dirty_buffers argument from invalidate_bdev(), it hasn't been used in 6 years (so akpm says). find * -name \*.[ch] | xargs grep -l invalidate_bdev | while read file; do quilt add $file; sed -ie 's/invalidate_bdev(\([^,]*\),[^)]*)/invalidate_bdev(\1)/g' $file; done Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-02[PATCH] revert "retries in ext3_prepare_write() violate ordering requirements"Andrew Morton
Revert e92a4d595b464c4aae64be39ca61a9ffe9c8b278. Dmitry points out "When we block_prepare_write() failed while ext3_prepare_write() we jump to "failure" label and call ext3_prepare_failure() witch search last mapped bh and invoke commit_write untill it. This is wrong!! because some bh from begining to the last mapped bh may be not uptodate. As a result we commit to disk not uptodate page content witch contains garbage from previous usage." and "Unexpected file size increasing." Call trace the same as it was in first issue but result is different. For example we have file with i_size is zero. we want write two blocks , but fs has only one free block. ->ext3_prepare_write(...from == 0, to == 2048) retry: ->block_prepare_write() == -ENOSPC# we failed but allocated one block here. ->ext3_prepare_failure() ->commit_write( from == 0, to == 1024) # after this i_size becomes 1024 :) if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) goto retry; Finally when all retries will be spended ext3_prepare_failure return -ENOSPC, but i_size was increased and later block trimm procedures can't help here. We don't appear to have the horsepower to fix these issues, so let's put things back the way they were for now. Cc: Kirill Korotaev <dev@openvz.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ken Chen <kenneth.w.chen@intel.com> Cc: Andrey Savochkin <saw@sw.ru> Cc: <linux-ext4@vger.kernel.org> Cc: Dmitriy Monakhov <dmonakhov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23[PATCH] "ext[34]: EA block reference count racing fix" performance fixAndrew Morton
A little mistake in 8a2bfdcbfa441d8b0e5cb9c9a7f45f77f80da465 is making all transactions synchronous, which reduces ext3 performance to comical levels. Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] ext[34]: EA block reference count racing fixMingming Cao
There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] ext[234]: update documentationAneesh Kumar K.V
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Mark struct super_operations constJosef 'Jeff' Sipek
This patch is inspired by Arjan's "Patch series to mark struct file_operations and struct inode_operations const". Compile tested with gcc & sparse. Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] mark struct inode_operations const 1Arjan van de Ven
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] jbd layer function called instead of fs specific oneDmitriy Monakhov
jbd function called instead of fs specific one. Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] remove ext[34]_inc_count and _dec_countEric Sandeen
- Naming is confusing, ext3_inc_count manipulates i_nlink not i_count - handle argument passed in is not used - ext3 and ext4 already call inc_nlink and dec_nlink directly in other places Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] return ENOENT from ext3_link when racing with unlinkEric Sandeen
Return -ENOENT from ext[34]_link if we've raced with unlink and i_nlink is 0. Doing otherwise has the potential to corrupt the orphan inode list, because we'd wind up with an inode with a non-zero link count on the list, and it will never get properly cleaned up & removed from the orphan list before it is freed. [akpm@osdl.org: build fix] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>