aboutsummaryrefslogtreecommitdiff
path: root/fs/ext4
AgeCommit message (Collapse)Author
2008-05-15ext4: Retry block allocation if new blocks are allocated from system zone.Aneesh Kumar K.V
If the block allocator gets blocks out of system zone ext4 calls ext4_error. But if the file system is mounted with errors=continue retry block allocation. We need to mark the system zone blocks as in use to make sure retry don't pick them again System zone is the block range mapping block bitmap, inode bitmap and inode table. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13ext4: mballoc fix mb_normalize_request algorithm for 1KB block size filesystemsValerie Clement
In case of inode preallocation, the number of blocks to allocate depends on the file size and it is calculated in ext4_mb_normalize_request(). Each group in the filesystem is then checked to find one that can be used for allocation; this is done in ext4_mb_good_group(). When a file bigger than 4MB is created, the requested number of blocks to preallocate, calculated by ext4_mb_normalize_request is 4096. However for a filesystem with 1KB block size, the maximum size of the block buddies used by the multiblock allocator is 2048, so none of groups in the filesystem satisfies the search criteria in ext4_mb_good_group(). Scanning all the filesystem groups impacts performance. This was demonstrated by using a freshly created, 70GB, 1k block filesystem, with caches dropped write before the test via /proc/sys/vm/drop_caches, and with the filesystem mounted with nodelalloc and nodealloc,nomballoc. The time to write an 8 megabyte file using "dd if=/dev/zero of=/mnt/test/fo bs=8k count=1k conv=fsync" took 35.5091 seconds (236kB/s) with nodellaloc, and 0.233754 seconds (35.9 MB/s) with the nodelloc,nomballoc options. With a 1TB partition, it took several minutes to write 8MB! This patch modifies the algorithm in ext4_mb_normalize_group_request to calculate the number of blocks to allocate by taking into account the maximum size of free blocks chunks handled by the multiblock allocator. It has also been tested for filesystems with 2KB and 4KB block sizes to ensure that those cases don't regress. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Valerie Clement <valerie.clement@bull.net> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13ext4: fix typos in messages and comments (journalled -> journaled)Jan Kara
Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13ext4: fix synchronization of quota files in journal=data modeJan Kara
In journal=data mode, it is not enough to do write_inode_now as done in vfs_quota_on() to write all data to their final location (which is needed for quota_read to work correctly). Calling journal_flush() does its job. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13ext4: Fix mount messages when quota disabledJan Kara
When quota is disabled, we should not print 'journaled quota not supported' when user tried to mount non-journaled quota. Also fix typo in the message. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-13ext4: correct mount option parsing to detect when quota options can be changedJan Kara
We should not allow user to change quota mount options when quota is just suspended. It would make mount options and internal quota state inconsistent. Also we should not allow user to change quota format when quota is turned on. On the other hand we can just silently ignore when some option is set to the value it already has (mount does this on remount). Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-05-14ext3/4: fix uninitialized bs in ext3/4_xattr_set_handle()Tiger Yang
This fix the uninitialized bs when we try to replace a xattr entry in ibody with the new value which require more than free space. This situation only happens we format ext3/4 with inode size more than 128 and we have put xattr entries both in ibody and block. The consequences about this bug is we will lost the xattr block which pointed by i_file_acl with all xattr entires in it. We will alloc a new xattr block and put that large value entry in it. The old xattr block will become orphan block. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Cc: <linux-ext4@vger.kernel.org> Cc: Andreas Gruenbacher <agruen@suse.de> Acked-by: Andreas Dilger <adilger@sun.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13Fix misuses of bdevname()Jean Delvare
bdevname() fills the buffer that it is given as a parameter, so calling strcpy() or snprintf() on the returned value is redundant (and probably not guaranteed to work - I don't think strcpy and snprintf support overlapping buffers.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Stephen Tweedie <sct@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29ext4: fix hot spins in mballoc after err_freebuddy and err_freemetaRoel Kluin
In ext4_mb_init_backend() 'i' is of type ext4_group_t. Since unsigned, i >= 0 is always true, so fix hot spins after err_freebuddy: and -meta: and prevent decrements when zero. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: fix test ext_generic_write_end() copied return valueRoel Kluin
'copied' is unsigned, whereas 'ret2' is not. The test (copied < 0) fails Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: Move mballoc headers/structures to a seperate header file mballoc.hMingming Cao
Move function and structure definiations out of mballoc.c and put it under a new header file mballoc.h Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: cleanup for compiling mballoc with verification and debugging #definesSolofo Ramangalahy
This patch allows compiling mballoc with: #define AGGRESSIVE_CHECK #define DOUBLE_CHECK #define MB_DEBUG It fixes: Compilation errors: fs/ext4/mballoc.c: In function '__mb_check_buddy': fs/ext4/mballoc.c:605: error: 'struct ext4_prealloc_space' has no member named 'group_list' fs/ext4/mballoc.c:606: error: 'struct ext4_prealloc_space' has no member named 'pstart' fs/ext4/mballoc.c:608: error: 'struct ext4_prealloc_space' has no member named 'len' Compilation warnings: fs/ext4/mballoc.c: In function 'ext4_mb_normalize_group_request': fs/ext4/mballoc.c:2863: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'int' fs/ext4/mballoc.c: In function 'ext4_mb_use_inode_pa': fs/ext4/mballoc.c:3103: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'int' Sparse check: fs/ext4/mballoc.c:3818:2: warning: context imbalance in 'ext4_mb_show_ac' - different lock contexts for basic block Signed-off-by: Solofo Ramangalahy <Solofo.Ramangalahy@bull.net> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: don't use ext4_error in ext4_check_descriptorsJosef Bacik
Because ext4_check_descriptors is called at mount time you can't use ext4_error as it calls ext4_commit_sb, which since the sb isn't all the way initialized causes bad things to happen (ie a panic). This patch changes the ext4_error's to printk's to keep this problem from happening. Thanks much, Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: mark inode dirty after initializing the extent treeAneesh Kumar K.V
We should mark the inode dirty only after initializing the extent tree. Also if we fail during extent initialization we need to call DQUOT_FREE_INODE. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: update ctime and mtime for truncate with extents.Solofo Ramangalahy
The recently announced "Linux POSIX file system test suite" caught a truncate issue when using extents: mtime and ctime are not updated when truncate is successful. This is the single issue caught with "default" ext4 (mkfs and mount with minimal options). The testsuite does not report failure with -o noextents. With the following patch, all tests of the testsuite pass. Signed-off-by: Solofo Ramangalahy <Solofo.Ramangalahy@bull.net> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: Don't do GFP_NOFS allocations after taking ext4_lock_groupAneesh Kumar K.V
We can't do GFP_NOFS allocation after taking ext4_lock_group BUG: sleeping function called from invalid context at mm/slab.c:3054 in_atomic():1, irqs_disabled():0 1 lock held by vi/2426: #0: (&ei->i_data_sem){----}, at: [<c01cf665>] ext4_release_file+0x23/0x66 Pid: 2426, comm: vi Not tainted 2.6.25-rc7 #24 [<c011a3dc>] __might_sleep+0xbe/0xc5 [<c01620c9>] kmem_cache_alloc+0x22/0xa6 [<c01e382a>] ext4_mb_release_inode_pa+0x73/0x1b3 [<c01e6adf>] ext4_mb_discard_inode_preallocations+0x22d/0x2d4 [<c013000a>] ? param_set_ushort+0x32/0x39 [<c01ceba1>] ext4_discard_reservation+0x27/0x6a [<c01cf66c>] ext4_release_file+0x2a/0x66 [<c0165bd6>] __fput+0xae/0x155 [<c0165e46>] fput+0x17/0x19 [<c0163756>] filp_close+0x50/0x5a [<c01647c0>] sys_close+0x71/0xad [<c0104aba>] sysenter_past_esp+0x5f/0xa5 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: move headers out of include/linuxChristoph Hellwig
Move ext4 headers out of include/linux. This is just the trivial move, there's some more thing that could be done later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: fix wrong gfp type under transactionJosef Bacik
This fixes the allocations with GFP_KERNEL while under a transaction problems in ext4. This patch is the same as its ext3 counterpart, just switches these to GFP_NOFS. Signed-off-by: Josef Bacik <jbacik@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: Fix hang on umount with quotas when journal is abortedJan Kara
Call dquot_drop() from ext4_dquot_drop() even if we fail to start a transaction. Otherwise we never get to dropping references to quota structures from the inode and umount will hang indefinitely. Thanks to Payphone LIOU for spotting the problem. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mingming Cao <cmm@us.ibm.com> CC: Payphone LIOU <lioupayphone@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: Fix update of mtime and ctime on renameJan Kara
The patch below makes ext4 update mtime and ctime of the directory into which we move file even if the directory entry already exists. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: make ext4_xattr_list() staticMingming Cao
This patch makes the needlessly global ext4_xattr_list() static. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: remove extra define of ext4_new_blocks_old from mballoc.cMingming Cao
The function prototype of ext4_new_blocks_old() is defined in ext4_fs.h, so we don't need the extra function prototype in mballoc.c Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: check ext4_journal_get_write_access() errorsAkinobu Mita
Check ext4_journal_get_write_access() errors. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Stephen Tweedie <sct@redhat.com> Cc: adilger@clusterfs.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mingming Cao <cmm@us.ibm.com>
2008-04-17ext4: use ext4_get_group_desc()Akinobu Mita
Use ext4_get_group_desc() in ext4_get_inode_block() instead of open coding the functionality. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Stephen Tweedie <sct@redhat.com> Cc: adilger@clusterfs.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mingming Cao <cmm@us.ibm.com>
2008-04-17ext4: use ext4_group_first_block_no()Akinobu Mita
Use ext4_group_first_block_no() and assign the return values to ext4_fsblk_t variables. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Stephen Tweedie <sct@redhat.com> Cc: adilger@clusterfs.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mingming Cao <cmm@us.ibm.com>
2008-04-17ext4: convert byte order of constant instead of variableMarcin Slusarz
Convert byte order of constant instead of variable which can be done at compile time (vs run time). Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: le*_add_cpu conversionMarcin Slusarz
replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-ext4@vger.kernel.org Cc: sct@redhat.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: adilger@clusterfs.com Cc: Mingming Cao <cmm@us.ibm.com>
2008-04-17ext4: Convert list_for_each_rcu() to list_for_each_entry_rcu()Aneesh Kumar K.V
The list_for_each_entry_rcu() primitive should be used instead of list_for_each_rcu(), as the former is easier to use and provides better type safety. http://groups.google.com/group/linux.kernel/browse_thread/thread/45749c83451cebeb/0633a65759ce7713?lnk=raot Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: reduce mballoc stack usage with noinline_for_stackEric Sandeen
mballoc.c is a whole lot of static functions, which gcc seems to really like to inline. With the changes below, on x86, I can at least get from: 432 ext4_mb_new_blocks 240 ext4_mb_free_blocks 208 ext4_mb_discard_group_preallocations 188 ext4_mb_seq_groups_show 164 ext4_mb_init_cache 152 ext4_mb_release_inode_pa 136 ext4_mb_seq_history_show ... to 220 ext4_mb_free_blocks 188 ext4_mb_seq_groups_show 176 ext4_mb_regular_allocator 164 ext4_mb_init_cache 156 ext4_mb_new_blocks 152 ext4_mb_release_inode_pa 136 ext4_mb_seq_history_show 124 ext4_mb_release_group_pa ... which still has some big functions in there, but not 432 bytes! Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29Convert ext4 to use unlocked_ioctlAndi Kleen
I checked ext4_ioctl and it looked largely safe to not be used without BKL. So convert it over to unlocked_ioctl. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-04-29ext4: Cache the correct extent length for uninit extentsAneesh Kumar K.V
When we convert an uninitialized extent to an initialized extent we need to make sure we return the number of blocks in the extent from the file system block corresponding to logical file block. Otherwise we cache wrong extent details and this results in file system corruption. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: Return unwritten buffer head when trying to read from prealloc space.Aneesh Kumar K.V
ext4_ext_get_blocks() returns the number of blocks allocated with buffer head unmapped for a read from prealloc space. This is needed so that delayed allocation doesn't do block reservation for prealloc space since the blocks are already reserved on disk. Mark the buffer head unwritten. Some code paths try to read the block if the buffer_head is not new and no uptodate. Marking the buffer head unwritten avoids this reading. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: make ext4_ext_get_blocks always return <= max_blocksAneesh Kumar K.V
ext4_ext_get_blocks() returns number of blocks allocated with buffer heads unmapped for a read from prealloc space. This is needed so that delayed allocation doesn't do block reservation for prealloc space since the blocks are already resevred on disk. Fix ext4_ext_get_blocks to not return greater than max_blocks, since some of the code paths cannot handle such a return value. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: Fix fallocate to update the file size in each transactionAneesh Kumar K.V
ext4_fallocate needs to update file size in each transaction. Otherwise if we crash the file size won't be seen. We were also not marking the inode dirty after updating file size before. Also when we try to retry allocation due to ENOSPC, make sure we reset the variable ret so that we actually do a retry. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: Fix race between migration and mmap writeAneesh Kumar K.V
Fail migrate if we allocated new blocks via mmap write. If we write to holes in the file via mmap, we end up allocating new blocks. This block allocation happens without taking inode->i_mutex. Since migrate is protected by i_mutex and migrate expects that no new blocks get allocated during migrate, fail migrate if new blocks get allocated. We can't take inode->i_mutex in the mmap write path because that would result in a locking order violation between i_mutex and mmap_sem. Also adding a separate rw_sempahore for protection is really high overhead for a rare operation such as migrate. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: zero out small extents when writing to prealloc area.Aneesh Kumar K.V
If the preallocated area is small zero out the full extent instead of splitting them. This should avoid the "write every alternate block" problem that could grow the number of extents dramatically. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: ENOSPC error handling for writing to an uninitialized extentAneesh Kumar K.V
This patch handles possible ENOSPC errors when writing to an uninitialized extent in case the filesystem is full. A write to a prealloc area causes the split of an unititalized extent into initialized and uninitialized extents. If we don't have space to add new extent information, instead of returning error, convert the existing uninitialized extent to initialized one. We need to zero out the blocks corresponding to the entire extent to prevent uninitialized data reaching userspace. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: Enable extent format for symlinks.Aneesh Kumar K.V
This patch enables extent-formatted normal symlinks. Using extents format allows a symlink to refer to a block number larger than 2^32 on large filesystems. We still don't enable extent format for fast symlinks, which are contained in the inode itself. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: Fix fallocate error pathAneesh Kumar K.V
Put the old extent details back if we fail to split the uninitialized extent. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: fix mount option parsingJosef Bacik
The "resize" option won't be noticed as it comes after the NULL option, so if you try to mount (or in this case remount) with that option it won't be recognized. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: fdatasync should skip metadata writeout when overwritingHisashi Hifumi
Currently fdatasync is identical to fsync in ext3. I think fdatasync should skip journal flush in data=ordered and data=writeback mode when it overwrites to already-instantiated blocks on HDD. When I_DIRTY_DATASYNC flag is not set, fdatasync should skip journal writeout because this indicates only atime or/and mtime updates. Following patch is the same approach of ext2's fsync code(ext2_sync_file). I did a performance test using the sysbench. #sysbench --num-threads=128 --max-requests=50000 --test=fileio --file-total-size=128G --file-test-mode=rndwr --file-fsync-mode=fdatasync run The result on ext3 was: -2.6.24 Operations performed: 0 Read, 50080 Write, 59600 Other = 109680 Total Read 0b Written 782.5Mb Total transferred 782.5Mb (12.116Mb/sec) 775.45 Requests/sec executed Test execution summary: total time: 64.5814s total number of events: 50080 total time taken by event execution: 3713.9836 per-request statistics: min: 0.0000s avg: 0.0742s max: 0.9375s approx. 95 percentile: 0.2901s Threads fairness: events (avg/stddev): 391.2500/23.26 execution time (avg/stddev): 29.0155/1.99 -2.6.24-patched Operations performed: 0 Read, 50009 Write, 61596 Other = 111605 Total Read 0b Written 781.39Mb Total transferred 781.39Mb (16.419Mb/sec) 1050.83 Requests/sec executed Test execution summary: total time: 47.5900s total number of events: 50009 total time taken by event execution: 2934.5768 per-request statistics: min: 0.0000s avg: 0.0587s max: 0.8938s approx. 95 percentile: 0.1993s Threads fairness: events (avg/stddev): 390.6953/22.64 execution time (avg/stddev): 22.9264/1.17 Filesystem I/O throughput was improved. Signed-off-by :Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: check return of ext4_orphan_get properlyJosef Bacik
This patch fix a panic while running fsfuzzer. We are improperly checking the return of ext4_orphan_get. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: use non-racy method for proc entries creationDenis V. Lunev
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: <linux-ext4@vger.kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29proc: remove proc_root_fsAlexey Dobriyan
Use creation by full path instead: "fs/foo". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: ext4: make ext4 handle quotaon on remountJan Kara
Update ext4 to handle quotaon on remount RW. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial: (24 commits) DOC: A couple corrections and clarifications in USB doc. Generate a slightly more informative error msg for bad HZ fix typo "is" -> "if" in Makefile ext*: spelling fix prefered -> preferred DOCUMENTATION: Use newer DEFINE_SPINLOCK macro in docs. KEYS: Fix the comment to match the file name in rxrpc-type.h. RAID: remove trailing space from printk line DMA engine: typo fixes Remove unused MAX_NODES_SHIFT MAINTAINERS: Clarify access to OCFS2 development mailing list. V4L: Storage class should be before const qualifier (sn9c102) V4L: Storage class should be before const qualifier sonypi: Storage class should be before const qualifier intel_menlow: Storage class should be before const qualifier DVB: Storage class should be before const qualifier arm: Storage class should be before const qualifier ALSA: Storage class should be before const qualifier acpi: Storage class should be before const qualifier firmware_sample_driver.c: fix coding style MAINTAINERS: Add ati_remote2 driver ... Fixed up trivial conflicts in firmware_sample_driver.c
2008-04-21ext*: spelling fix prefered -> preferredBenoit Boissinot
Spelling fix: prefered -> preferred Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-19[PATCH] r/o bind mounts: elevate write count for ioctls()Dave Hansen
Some ioctl()s can cause writes to the filesystem. Take these, and make them use mnt_want/drop_write() instead. [AV: updated] Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-15vfs: fix possible deadlock in ext2, ext3, ext4 when using xattrsJan Kara
mb_cache_entry_alloc() was allocating cache entries with GFP_KERNEL. But filesystems are calling this function while holding xattr_sem so possible recursion into the fs violates locking ordering of xattr_sem and transaction start / i_mutex for ext2-4. Change mb_cache_entry_alloc() so that filesystems can specify desired gfp mask and use GFP_NOFS from all of them. Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Dave Jones <davej@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>