aboutsummaryrefslogtreecommitdiff
path: root/fs/gfs2/recovery.c
AgeCommit message (Collapse)Author
2007-07-09[GFS2] Fix sign problem in quota/statfs and cleanup _host structuresSteven Whitehouse
This patch fixes some sign issues which were accidentally introduced into the quota & statfs code during the endianess annotation process. Also included is a general clean up which moves all of the _host structures out of gfs2_ondisk.h (where they should not have been to start with) and into the places where they are actually used (often only one place). Also those _host structures which are not required any more are removed entirely (which is the eventual plan for all of them). The conversion routines from ondisk.c are also moved into the places where they are actually used, which for almost every one, was just one single place, so all those are now static functions. This also cleans up the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__. The net result is a reduction of about 100 lines of code, many functions now marked static plus the bug fixes as mentioned above. For good measure I ran the code through sparse after making these changes to check that there are no warnings generated. This fixes Red Hat bz #239686 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-05[GFS2] Fix indent in recovery.cSteven Whitehouse
As per comments from Andrew Morton and Jan Engelhardt, this fixes the indent and removes the "static" from a variable declaration since its not needed in this case (now allocated on the stack of the function in question). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Cc: Andrew Morton <akpm@osdl.org>
2006-11-30[GFS2] Fix crc32 calculation in recovery.cSteven Whitehouse
Commit "[GFS2] split and annotate gfs2_log_head" resulted in an incorrect checksum calculation for log headers. This patch corrects the problem without resorting to copying the whole log header as the previous code used to. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_log_headAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-20[GFS2] Fix bmap to map extents properlySteven Whitehouse
This fix means that bmap will map extents of the length requested by the VFS rather than guessing at it, or just mapping one block at a time. The other callers of gfs2_block_map are audited to ensure they send the correct max extent lengths (i.e. set bh->b_size correctly). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-25[GFS2/DLM] Fix trailing whitespaceSteven Whitehouse
As per Andrew Morton's request, removed trailing whitespace. Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-21[GFS2] Tidy up meta_io codeSteven Whitehouse
Fix a bug in the directory reading code, where we might have dereferenced a NULL pointer in case of OOM. Updated the directory code to use the new & improved version of gfs2_meta_ra() which now returns the first block that was being read. Previously it was releasing it requiring following code to grab the block again at each point it was called. Also turned off readahead on directory lookups since we are reading a hash table, and therefore reading the entries in order is very unlikely. Readahead is still used for all other calls to the directory reading function (e.g. when growing the hash table). Removed the DIO_START constant. Everywhere this was used, it was used to unconditionally start i/o aside from a couple of places, so I've removed it and made the couple of exceptions to this rule into separate functions. Also hunted through the other DIO flags and removed them as arguments from functions which were always called with the same combination of arguments. Updated gfs2_meta_indirect_buffer to be a bit more efficient and hopefully also be a bit easier to read. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-19[GFS2] Export lm_interface to kernel headersFabio Massimo Di Nitto
lm_interface.h has a few out of the tree clients such as GFS1 and userland tools. Right now, these clients keeps a copy of the file in their build tree that can go out of sync. Move lm_interface.h to include/linux, export it to userland and clean up fs/gfs2 to use the new location. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-18[GFS2] Map multiple blocks at once where possibleSteven Whitehouse
This is a tidy up of the GFS2 bmap code. The main change is that the bh is passed to gfs2_block_map allowing the flags to be set directly rather than having to repeat that code several times in ops_address.c. At the same time, the extent mapping code from gfs2_extent_map has been moved into gfs2_block_map. This allows all calls to gfs2_block_map to map extents in the case that no allocation is taking place. As a result reads and non-allocating writes should be faster. A quick test with postmark appears to support this. There is a limit on the number of blocks mapped in a single bmap call in that it will only ever map blocks which are pointed to from a single pointer block. So in other words, it will never try to do additional i/o in order to satisfy read-ahead. The maximum number of blocks is thus somewhat less than 512 (the GFS2 4k block size minus the header divided by sizeof(u64)). I've further limited the mapping of "normal" blocks to 32 blocks (to avoid extra work) since readpages() will currently read a maximum of 32 blocks ahead (128k). Some further work will probably be needed to set a suitable value for DIO as well, but for now thats left at the maximum 512 (see ops_address.c:gfs2_get_block_direct). There is probably a lot more that can be done to improve bmap for GFS2, but this is a good first step. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05[GFS2] Style changes in logging codeSteven Whitehouse
As per Jan Engelhardt's comments, removed some unused code and removed some brackets which were not required. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04[GFS2] Change all types to uX styleSteven Whitehouse
This makes all fixed size types have consistent names. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01[GFS2] Update copyright, tidy up incore.hSteven Whitehouse
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this updates the copyright message to say "version" in full rather than "v.2". Also incore.h has been updated to remove forward structure declarations which are not required. The gfs2_quota_lvb structure has now had endianess annotations added to it. Also quota.c has been updated so that we now store the lvb data locally in endian independant format to avoid needing a structure in host endianess too. As a result the endianess conversions are done as required at various points and thus the conversion routines in lvb.[ch] are no longer required. I've moved the one remaining constant in lvb.h thats used into lm.h and removed the unused lvb.[ch]. I have not changed the HIF_ constants. That is left to a later patch which I hope will unify the gh_flags and gh_iflags fields of the struct gfs2_holder. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-10[GFS2] Fix a couple of refcount leaks.Russell Cattelan
recovery.c add a brelse to deal with gfs2_replay_read_block being called twice on the same block. add a dput to drop the ref count on the root inode. This was causing lingering glocks and thus causing a mount failure to hang. Fix a endian conversion macro that was was swizzling 16bits when it should have been swizzling 32. Signed-off-by: Russell Cattelan <cattelan@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-04[GFS2] Fix lock ordering bug in page fault pathSteven Whitehouse
Mmapped files were able to trigger a lock ordering bug. Private maps do not need to take the glock so early on. Shared maps do unfortunately, however we can get around that by adding a flag into the flags for the struct gfs2_file. This only works because we are taking an exclusive lock at this point, so we know that nobody else can be racing with us. Fixes Red Hat bugzilla: #201196 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-14[GFS2] Fix unlinked file handlingSteven Whitehouse
This patch fixes the way we have been dealing with unlinked, but still open files. It removes all limits (other than memory for inodes, as per every other filesystem) on numbers of these which we can support on GFS2. It also means that (like other fs) its the responsibility of the last process to close the file to deallocate the storage, rather than the person who did the unlinking. Note that with GFS2, those two events might take place on different nodes. Also there are a number of other changes: o We use the Linux inode subsystem as it was intended to be used, wrt allocating GFS2 inodes o The Linux inode cache is now the point which we use for local enforcement of only holding one copy of the inode in core at once (previous to this we used the glock layer). o We no longer use the unlinked "special" file. We just ignore it completely. This makes unlinking more efficient. o We now use the 4th block allocation state. The previously unused state is used to track unlinked but still open inodes. o gfs2_inoded is no longer needed o Several fields are now no longer needed (and removed) from the in core struct gfs2_inode o Several fields are no longer needed (and removed) from the in core superblock There are a number of future possible optimisations and clean ups which have been made possible by this patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18[GFS2] Update copyright date to 2006Steven Whitehouse
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18[GFS2] Remove semaphore.h from C filesSteven Whitehouse
We no longer use semaphores, everything has been converted to mutex or rwsem, so we don't need to include this header any more. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-05[GFS2] Readpages supportSteven Whitehouse
This adds readpages support (and also corrects a small bug in the readpage error path at the same time). Hopefully this will improve performance by allowing GFS to submit larger lumps of I/O at a time. In order to simplify the setting of BH_Boundary, it currently gets set when we hit the end of a indirect pointer block. There is always a boundary at this point with the current allocation code. It doesn't get all the boundaries right though, so there is still room for improvement in this. See comments in fs/gfs2/ops_address.c for further information about readpages with GFS2. Signed-off-by: Steven Whitehouse
2006-04-26[GFS2] Remove GL_NEVER_RECURSE flagSteven Whitehouse
There is no point in keeping this flag since recursion is not now allowed for any glock. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-26[GFS2] Don't do recursive locking in glock layerSteven Whitehouse
This patch changes the last user of recursive locking so that it no longer needs this feature and removes it from the glock layer. This makes the glock code a lot simpler and easier to understand. Its also a prerequsite to adding support for the AOP_TRUNCATED_PAGE return code (or at least it is if you don't want your brain to melt in the process) I've left in a couple of checks just in case there is some place else in the code which is still using this feature that I didn't spot yet, but they can probably be removed long term. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-20[GFS2] journal recovery patchDavid Teigland
This is one of the changes related to journal recovery I mentioned a couple weeks ago. We can get into a situation where there are only readonly nodes currently mounting the fs, but there are journals that need to be recovered. Since the readonly nodes can't recover journals, the next rw mounter needs to go through and check all journals and recover any that are dirty (i.e. what the first node to mount the fs does). This rw mounter needs to skip the journals held by the existing readonly nodes. Skipping those journals amounts to using the TRY flag on the journal locks so acquiring the lock of a journal held by a readonly node will fail instead of blocking indefinately. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-30[GFS] Fix bug in endian conversion for metadata headerSteven Whitehouse
In some cases 16 bit functions were being used rather than 32 bit functions. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-28[GFS2] Further updates to dir and logging codeSteven Whitehouse
This reduces the size of the directory code by about 3k and gets readdir() to use the functions which were introduced in the previous directory code update. Two memory allocations are merged into one. Eliminates zeroing of some buffers which were never used before they were initialised by other data. There is still scope for further improvement in the directory code. On the logging side, a hand created mutex has been replaced by a standard Linux mutex in the log allocation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-27[GFS2] Macros removal in gfs2.hSteven Whitehouse
As suggested by Pekka Enberg <penberg@cs.helsinki.fi>. The DIV_RU macro is renamed DIV_ROUND_UP and and moved to kernel.h The other macros are gone from gfs2.h as (although not requested by Pekka Enberg) are a number of included header file which are now included individually. The inode number comparison function is now an inline function. The DT2IF and IF2DT may be addressed in a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-27[GFS2] 80 Column audit of GFS2Steven Whitehouse
Requested by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-13[GFS2] Fix for root inode ref count bugSteven Whitehouse
Umount is now working correctly again. The bug was due to not getting an extra ref count when mounting the fs. We should have bumped it by two (once for the internal pointer to the root inode from the super block and once for the inode hanging off the dcache entry for root). Also this patch tidys up the code dealing with looking up and creating inodes. We now pass Linux inodes (with gfs2_inodes attached) rather than the other way around and this reduces code duplication in various places. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16[GFS2] The core of GFS2David Teigland
This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>