| Age | Commit message (Collapse) | Author |
|---|
|
the server can indicate a number of error conditions by setting the
appropriate bits in the SEQUENCE operation. The client re-establishes
state with the server when it receives one of those, with the action
depending on the specific case.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The v4.1 client should take into account the desired rsize, wsize when
negotiating the max size in CREATE_SESSION. Accordingly, it should use
rsize, wsize that are smaller than the session negotiated values.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
In v4.1 the client MUST/SHOULD use the EXCLUSIVE4_1 flag instead of
EXCLUSIVE4, and GUARDED when the server supports persistent sessions.
For now (and until we support suppattr_exclcreat), we don't send any
attributes with EXCLUSIVE4_1 relying in the subsequent SETATTR as in v4.0
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Replace sync and async handlers setting of the NFS4CLNT_SESSION_SETUP bit with
setting NFS4CLNT_CHECK_LEASE, and let the state manager decide to reset the session.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Do not wake up the next slot_tbl_waitq task in nfs4_free_slot because we
may be draining the slot. Either signal the state manager that the session
is drained (the state manager wakes up tasks) OR wake up the next task.
In nfs41_sequence_done, the slot dereference is only needed in the sequence
operation success case.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If the session is reset during state recovery, the state manager thread can
sleep on the slot_tbl_waitq causing a deadlock.
Add a completion framework to the session. Have the state manager thread set
a new session state (NFS4CLNT_SESSION_DRAINING) and wait for the session slot
table to drain.
Signal the state manager thread in nfs41_sequence_free_slot when the
NFS4CLNT_SESSION_DRAINING bit is set and the session is drained.
Reported-by: Trond Myklebust <trond@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
nfs4_recover_session can put rpciod to sleep. Just use nfs4_schedule_recovery.
Reported-by: Trond Myklebust <trond.myklebust@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Do not fall through and call nfs4_delay on session error handling.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
nfs4_read_done returns zero on unhandled errors. nfs_readpage_result will
return on a negative tk_status without freeing the slot.
Call nfs4_sequence_free_slot on unhandled errors in nfs4_read_done.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
nfs41_sequence_free_slot can be called multiple times on SEQUENCE operation
errors.
No reason to inline nfs4_restart_rpc
Reported-by: Trond Myklebust <trond.myklebust@netapp.com>
nfs_writeback_done and nfs_readpage_retry call nfs4_restart_rpc outside the
error handler, and the slot is not freed prior to restarting in the rpc_prepare
state during session reset.
Fix this by moving the call to nfs41_sequence_free_slot from the error
path of nfs41_sequence_done into nfs4_restart_rpc, and by removing the test
for NFS4CLNT_SESSION_SETUP.
Always free slot and goto the rpc prepare state on async errors.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Make this clear by calling rpc_restart-call.
Prepare for nfs4_restart_rpc() to free slots.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The bit is no longer used for session setup, only for session reset.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Reported-by: Trond Myklebust <trond.myklebust@netapp.com>
Resetting the clientid from the state manager could result in not confirming
the clientid due to create session not being called.
Move the create session call from the NFS4CLNT_SESSION_SETUP state manager
initialize session case into the NFS4CLNT_LEASE_EXPIRED case establish_clid
call.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
|
|
NFS4ERR_FILE_OPEN is return by the server when an operation cannot be
performed because the file is currently open and local (to the server)
semantics prohibit the operation while the file is open.
A typical case is a RENAME operation on an MS-Windows platform, which
prevents rename while the file is open.
While it is possible that such a condition is transitory, it is also
very possible that the file will be held open for an extended period
of time thus preventing the operation.
The current behaviour of Linux/NFS is to retry the operation
indefinitely. This is not appropriate - we do not expect a rename to
take an arbitrary amount of time to complete.
Rather, and error should be returned. The most obvious error code
would be EBUSY, which is a legal at least for 'rename' and 'unlink',
and accurately captures the reason for the error.
This patch allows a few retries until about 2 seconds have elapsed,
then returns EBUSY.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Fix another 'sparse' warning in fs/nfs/nfs4proc.c
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If our lease expires, and the server reboots while we're recovering, we
need to be able to wait until the grace period is over.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Changeset a65318bf3afc93ce49227e849d213799b072c5fd (NFSv4: Simplify some
cache consistency post-op GETATTRs) incorrectly changed the getattr
bitmap for readdir().
This causes the readdir() function to fail to return a
fileid/inode number, which again exposed a bug in the NFS readdir code that
causes spurious ENOENT errors to appear in applications (see
http://bugzilla.kernel.org/show_bug.cgi?id=14541).
The immediate band aid is to revert the incorrect bitmap change, but more
long term, we should change the NFS readdir code to cope with the
fact that NFSv4 servers are not required to support fileids/inode numbers.
Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Commits 29fba38b (nfs41: lease renewal) and fc01cea9 (nfs41: sequence
operation) introduce a couple of put_rpccred() calls on credentials for
which there is no corresponding get_rpccred().
See http://bugzilla.kernel.org/show_bug.cgi?id=14249
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
RFC 3530 states that when we recieve the error NFS4ERR_RESOURCE, we are not
supposed to bump the sequence number on OPEN, LOCK, LOCKU, CLOSE, etc
operations. The problem is that we map that error into EREMOTEIO in the XDR
layer, and so the NFSv4 middle-layer routines like seqid_mutating_err(),
and nfs_increment_seqid() don't recognise it.
The fix is to defer the mapping until after the middle layers have
processed the error.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
* remove asm/atomic.h inclusion from linux/utsname.h --
not needed after kref conversion
* remove linux/utsname.h inclusion from files which do not need it
NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the NFSv4 server doesn't support a POSIX attribute, the generic NFS code
needs to know that, so that it don't keep trying to poll for it.
However, by the same count, if the NFSv4 server does support that
attribute, then we should ensure that the inode metadata is appropriately
labelled as being untrusted. For instance, if we don't know the correct
value of the file's uid, we should certainly not be caching ACLs or ACCESS
results.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If the server is broken, then retrying forever won't fix it. We
should just give up after a while, and return an error to the user.
We set the number of retries to 10 for now...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We just had a case in which a buggy server occasionally returns the wrong
attributes during an OPEN call. While the client does catch this sort of
condition in nfs4_open_done(), and causes the nfs4_atomic_open() to return
-EISDIR, the logic in nfs_atomic_lookup() is broken, since it causes a
fallback to an ordinary lookup instead of just returning the error.
When the buggy server then returns a regular file for the fallback lookup,
the VFS allows the open, and bad things start to happen, since the open
file doesn't have any associated NFSv4 state.
The fix is firstly to return the EISDIR/ENOTDIR errors immediately, and
secondly to ensure that we are always careful when dereferencing the
nfs_open_context state pointer.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Commit 008f55d0e019943323c20a03493a2ba5672a4cc8 (nfs41: recover lease in
_nfs4_lookup_root) forces the state manager to always run on mount. This is
a bug in the case of NFSv4.0, which doesn't require us to send a
setclientid until we want to grab file state.
In any case, this is completely the wrong place to be doing state
management. Moving that code into nfs4_init_session...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
nfs4_open_recover_helper clears opendata->o_res
before calling nfs4_init_opendata_res, thus causing
NFSv4.0 OPEN operations to be sent rather than nfsv4.1.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Conflicts:
fs/nfs/client.c
fs/nfs/super.c
|
|
Unless I'm mistaken, NFS_INO_INVALID_ACL is being checked twice during
getacl calls (i.e. first via nfs_revalidate_inode() and then by each all
site).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Defines a new 'struct nfs4_slot_table' in the 'struct nfs4_session'
for use by the backchannel. Initializes, resets, and destroys the backchannel
slot table in the same manner the forechannel slot table is initialized,
reset, and destroyed.
The sequenceid for each slot in the backchannel slot table is initialized
to 0, whereas the forechannel slotid's sequenceid is set to 1.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
|
|
Generalize nfs4_init_slot_table() so it can be used to initialize the
backchannel slot table in addition to the forechannel slot table.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
|
|
Generalize nfs4_reset_slot_table() so it can be used to reset the
backchannel slot table in addition to the forechannel slot table.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
|
|
Frees the preallocated backchannel resources that are associated with
this session when the session is destroyed.
A backchannel is currently created once per session. Destroy the backchannel
only when the session is destroyed.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
|
|
Set the SESSION4_BACK_CHAN flag to indicate the client supports a backchannel.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
|
|
It is possible for servers to return NFS4ERR_BAD_STATEID when
the state management code is recovering locks or is reclaiming state when
returning a delegation. Ensure that we handle that case.
While we're at it, add in handlers for NFS4ERR_STALE,
NFS4ERR_ADMIN_REVOKED, NFS4ERR_OPENMODE, NFS4ERR_DENIED and
NFS4ERR_STALE_STATEID, since the protocol appears to allow for them too.
Also handle ENOMEM...
Finally, rather than add new NFSv4.0-specific errors and error handling into
the generic delegation code, move that open file and locking state error
handling into the NFSv4 layer.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The NFSv4 delegation recovery code is required by the protocol to handle
more errors. Rather than add NFSv4.0 specific errors into 'generic'
delegation code, we should move the error handling into the NFSv4 layer.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Unlike minorversion0, in nfsv4.1 the open and lock seqids need
not be incremented by the client and should always be set to zero.
This is implemented using a new nfs_rpc_ops methods -
increment_open_seqid and increment_lock_seqid
Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
This creates the nfsv4.1 session on mount.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Unlike SETCLIENTID, EXCHANGE_ID requires a machine credential. Do not search
for credentials other than the machine credential.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
EXCHANGE_ID has different credential requirements than SETCLIENTID.
Prepare for a separate credential function.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
nfsv4.1 clientid is established via EXCHANGE_ID rather than
SETCLIENTID{,_CONFIRM}
This is implemented using a new establish_clid method in
nfs4_state_recovery_ops.
nfs41: establish clientid via exchange id only if cred != NULL
>From 2.6.26 reclaimer() uses machine cred for setting up the client id
therefore it is never expected to be NULL.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
[removed dprintk]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: lease renewal]
[revamped patch for new nfs4_state_manager design]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Use the machine cred for sending SEQUENCE to renew
the client's lease.
[revamp patch for new state management design starting 2.6.29]
[nfs41: support minorversion 1 for nfs4_check_lease]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get cred in exchange_id when cred arg is NULL]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use cl_machined_cred instead of cl_ex_cred]
Since EXCHANGE_ID insists on using the machine credential, cl_ex_cred is
not needed. nfs4_proc_exchange_id() is only called if the machine credential
is available. Remove the credential logic from nfs4_proc_exchange_id.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
[moved nfs4_get_renew_cred related changes to
"nfs41: introduce get_state_renewal_cred"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Send a NFSv4.1 SEQUENCE op rather than RENEW that was deprecated in
minorversion 1.
Use the nfs_client minorversion to select reboot_recover/
network_partition_recovery/state_renewal ops.
Note: we use reclaimer to create the nfs41 session before there are any
cl_superblocks for the nfs_client.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[revamped patch for new nfs4_state_manager design]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: obliterate nfs4_state_recovery_ops.renew_lease method]
moved to nfs4_state_maintenance_ops
[also undid per-minorversion nfs4_state_recovery_ops here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Define a new session reset state which is set upon a sequence operation error
in both the sync and async error handlers.
Place all new requests and all but the last outstanding rpc on the
slot_tbl_waitq. Spawn the recovery thread when the last slot is free.
Call nfs4_proc_destroy_session, reinitialize the session, call
nfs4_proc_create_session, clear the session reset state, and wake up the next
task on the slot_tbl_waitq.
Return the nfs4_proc_destroy_session status to the session reclaimer and
check for NFS4ERR_BADSESSION and NFS4ERR_DEADSESSION. Other destroy session
errors should be handled in nfs4_proc_destroy_session where the call can
be retried with adjusted arguments.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
nfs41: make nfs4_wait_bit_killable public]
nfs4_wait_bit_killable to be used by NFSv4.1 session recover logic.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: have create_session work on nfs_client]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: trigger the state manager for session reset]
Replace the session reset state with the NFS4CLNT_SESSION_SETUP cl_state.
Place all rpc tasks to sleep on the slot table waitqueue until the slot
table is drained, then schedule state recovery and wait for it to complete.
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: remove nfs41_session_recovery [ch]
Replaced by using the nfs4_state_manager.
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: nfs4_wait_bit_killable only used locally]
[nfs41: keep nfs4_wait_bit_killable static]
[nfs41: keep const nfs_server in nfs4_handle_exception]
[nfs41: remove session parameter from nfs4_find_slot]
Signed-off-by: Andy Adamson <andros@netapp.com
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: resset the session from nfs41_setup_sequence]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Remove checking for any errors that the SEQUENCE operation does not return.
-NFS4ERR_STALE_CLIENTID, NFS4ERR_EXPIRED, NFS4ERR_CB_PATH_DOWN, NFS4ERR_BACK_CHAN_BUSY, NFS4ERR_OP_NOT_IN_SESSION.
SEQUENCE operation error recovery is very primative, we only reset the session.
Remove checking for any errors that are returned by the SEQUENCE operation, but
that resetting the session won't address.
NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SEQUENCE_POS,NFS4ERR_TOO_MANY_OPS.
Add error checking for missing SEQUENCE errors that a session reset will
address.
NFS4ERR_BAD_HIGH_SLOT, NFS4ERR_DEADSESSION, NFS4ERR_SEQ_FALSE_RETRY.
A reset of the session is currently our only response to a SEQUENCE operation
error. Don't reset the session on errors where a new session won't help.
Don't reset the session on errors where a new session won't help.
[nfs41: nfs4_async_handle_error update error checking]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: trigger the state manager for session reset]
Replace session state bit with nfs_client state bit. Set the
NFS4CLNT_SESSION_SETUP bit upon a session related error in the sync/async
error handlers.
[nfs41: _nfs4_async_handle_error fix session reset error list]
Sequence operation errors that session reset could help.
NFS4ERR_BADSESSION
NFS4ERR_BADSLOT
NFS4ERR_BAD_HIGH_SLOT
NFS4ERR_DEADSESSION
NFS4ERR_CONN_NOT_BOUND_TO_SESSION
NFS4ERR_SEQ_FALSE_RETRY
NFS4ERR_SEQ_MISORDERED
Sequence operation errors that a session reset would not help
NFS4ERR_BADXDR
NFS4ERR_DELAY
NFS4ERR_REP_TOO_BIG
NFS4ERR_REP_TOO_BIG_TO_CACHE
NFS4ERR_REQ_TOO_BIG
NFS4ERR_RETRY_UNCACHED_REP
NFS4ERR_SEQUENCE_POS
NFS4ERR_TOO_MANY_OPS
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41 nfs4_handle_exception fix session reset error list]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved nfs41_sequece_call_done code to nfs41: sequence operation]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
[nfs41: change nfs4_restart_rpc argument]
[nfs41: check for session not minorversion]
[nfs41: trigger the state manager for session reset]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[always define nfs4_restart_rpc]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
At mount, nfs_alloc_client sets the cl_state NFS4CLNT_LEASE_EXPIRED bit
and nfs4_alloc_session sets the NFS4CLNT_SESSION_SETUP bit, so both bits are
set when nfs4_lookup_root calls nfs4_recover_expired_lease which schedules
the nfs4_state_manager and waits for it to complete.
Place the session setup after the clientid establishment in nfs4_state_manager
so that the session is setup right after the clientid has been established
without rescheduling the state manager.
Unlike nfsv4.0, the nfs_client struct is not ready to use until the session
has been established. Postpone marking the nfs_client struct to NFS_CS_READY
until after a successful CREATE_SESSION call so that other threads cannot use
the client until the session is established.
If the EXCHANGE_ID call fails and the session has not been setup (the
NFS4CLNT_SESSION_SETUP bit is set), mark the client with the error and return.
If the session setup CREATE_SESSION call fails with NFS4ERR_STALE_CLIENTID
which could occur due to server reboot or network partition inbetween the
EXCHANGE_ID and CREATE_SESSION call, reset the NFS4CLNT_LEASE_EXPIRED and
NFS4CLNT_SESSION_SETUP bits and try again.
If the CREATE_SESSION call fails with other errors, mark the client with
the error and return.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: NFS_CS_SESSION_SETUP cl_cons_state for back channel setup]
On session setup, the CREATE_SESSION reply races with the server back channel
probe which needs to succeed to setup the back channel. Set a new
cl_cons_state NFS_CS_SESSION_SETUP just prior to the CREATE_SESSION call
and add it as a valid state to nfs_find_client so that the client back channel
can find the nfs_client struct and won't drop the server backchannel probe.
Use a new cl_cons_state so that NFSv4.0 back channel behaviour which only
sets NFS_CS_READY is unchanged.
Adjust waiting on the nfs_client_active_wq accordingly.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rename NFS_CS_SESSION_SETUP to NFS_CS_SESSION_INITING]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: set NFS_CL_SESSION_INITING in alloc_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: move session setup into a function]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved nfs4_proc_create_session declaration here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
